Middle C (C4) sustaining after being depressed in Logic Express 8

My son is having this problem involving a key (C4) sustaining after being depressed in Logic Express 8 only. This problem has only emerged after upgrading from Logic 7. I have sent an email to M-Audio (shown below) and they have agreed to keep me updated. I thought I would post it in the forums in case any one else has observed a similar problem. I would be grateful for any feedback.
+"Hi Richard,+
+I am writing to you, on behalf of my son Alexander, as a follow up to his email (sent online and answered by you) attached below.+
+First of all thank you for your reply to his online enquiry. I am responding for him since I believe I have isolated the problem. First of all, the KEYSTATION PRO 88 keyboard is OK. There seems to be a conflict between Logic Express 8 and the M-Audio Firewire Audiophile driver. The sustain problem with middle C (C4) only happens with the Audiophile connected. Alex is using it to route digital audio o/p from his Powerbook to Roland DS 30 A studio monitors. If we listen to the audio via the Powerbook's headphone socket, then the sustain problem is not there. Everything works fine. I have tried a KEYSTATION 49e keyboard and this acts in exactly the same way as the KEYSTATION PRO 88. Middle C (C4) sustains when depressed, when the Audiopile is connected. Both keyboards can't be faulty! I believe there could be a conflict between the Audiophile driver and Logic Express 8. He has updated the driver to the latest version, but the problem remains. Logic Express 7 works OK (it always has).+
+I called TJ on the number you provided and he has logged my call as a possible issue. Is it possible for you to replicate the problem in your lab? Perhaps you can advise a fix, otherwise Alex will have to go back to Logic Express 7. I have also advised Apple, but it is their policy not to give feedback. They would probably say that it was an M-Audio problem anyway. I would be interested to know if you have had any other enquiries regarding this.+
+I look forward to hearing from you+
+Kind regards+
+Eric Lovat+
+(on behalf of Alexander Lovat)"+

Alex uninstalled Logic Express 8, then re-installed it. The problem seems to have disappeared. I hope for good. I may have posted this too hastily, but if someone else has a similar problem, then maybe reading this thread will fix it.

Similar Messages

  • Sustain pedal plays notes in logic express 9

    HI
    I am using a Yamaha Arius piano that has 3 pedals. I have the piano plugged in via midi to usb connection. Everytime i push down the sustain pedal in Logic express it plays a note. When i look to see what it comes up as it says E3 and then depending on the pressure i place on the pedal, the number changes...
    Ive tried using transformers in the environment but this did not fix the issue...
    I have checked all of the connections and everything seems to be in working order when playing the piano by itself.
    Any thoughts?
    Thanks so much

    Hi, assign a new name to your new bouce, like "project1.aiff" instead that "project.aiff",
    Then rename if you want to call it as the past bounce. cheers

  • Physical adapters go missing after being applied to Logical Switch

    I have an existing VMM 2012 environment that has been working without trouble for quite some time. We're doing a domain migration, so I created a cluster on the new domain and added it to my old VMM environment to make the transfer of guests easier.
    I an having trouble with creating Virtual Switches on the two new hosts in the new cluster. Essentially, I create a new logical switch using the configuration set up for the other existing servers and add two physical adapters to it. It's configured identically
    to my other two clusters. After I apply the changes, the switch is created and the NICs are teamed (verified in nic teaming console) but the physical adapters disappear both from the just-configured switch but also the hardware tab. Trying to connect a VM
    to this results in "not specified" being displayed in the connectivity field (browsing yields nothing).
    I'm hoping I simply missed something since it's been ages since I had to build a new cluster but a side by side comparison seems to indicate the old/new clusters are configured similarly.
    Thanks.
    Tim

    why reinvent the wheel use rman deletion?Will you please clear that how RMAN will identify the applied logs?
    Are you talking about archive deletion policy?
    If this the solution, then this didn't work fine for me (10.2.0.4), you may check this out for 11.1.0.7.
    Regards,
    S.K.
    Edited by: Santosh Kumar on Aug 23, 2009 8:56 PM

  • Some organs don't play in new Logic Express files after JamPacks installed

    After loading only the instruments from the Symphony Orchestra and World Music GarageBand Jam Packs, I lost the ability to hear most of the organs available in Logic Express and all of the organs available in GarageBand after inserting them into Logic Express tracks. These same organ sounds still play in any Logic Express file set up prior to the installation of the JamPacks and they continue to play in GarageBand. Can an uninstall/reinstall of Logic Express 7.2.3 be a fix for this or is there an easier way to return the lost instruments to Logic Express?
    1.83 GHz Intel Core Duo iMac   Mac OS X (10.4.8)   Midisport 4x4, iControl

    The loss of instrument sounds in Logic Express had nothing to do with the installation of GarageBand JamPacks. The midi channel setting in the Inspector box of the Arrange window in Logic Express needed to be set to channel 1 to get midi data from other than channel 1 to play some of the inserted CoreAudio instruments. I don't understand what's going on but now I'm able to get the instruments that would not play.

  • Headphones no longer work after being plugged into speaker

    Hi i purchased a ipod touch 5th generation 32 gb bundle from target just over a week ago which came with the iCoustic 20 in 1 Accessory kit Model No : IC184. After plugging the ipod into the supplied speaker this morning trying to listen to music it kept making stacic like noises and changing volume it was alwful to try and listen so gave up and went back to taking it off speaker and playing it back through apple headphones but now after being plugged into the speaker the headphones wont work its just a buzzing sound if you turn the volume up all the way loud the music will come back through headphones then when turning it down it cuts out again or if you manage to get the music it will stop after a couple of seconds. I have done a factory reset but it has made no difference.Please help have a very upset daughter it is frustrating do we take this back for a refund and get a new one if so how do we keep the music and photos etc she has on this one? Thankyou.

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
    Try the following to rule out a software problem
    - Check also Settings > General > Accessibility > Hearing. Make sure that the sound balance is not set all the way to "R".
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.

  • Will Not Copy After Being Idle

    THIS IS A COPYING ISSUE!!!  After installing the upgraded version of Comcast's latest modem/router, our HP 6550 would not print.  I contacted Comcast and reported the difficulty and they informed me it was a printer problem - not their new modem.  Consequently, we purchased a new HP 5740 printer  The printing function worked fine and it would copy immediatley after the printer was turned on, however, after the printer sat idle for a couple of hours, the copy function would not work.  If you then turned the printer off and immediately turned it back on, it would copy.  Again, Comcast reiterated it was a printer problem.   I returned the original 5740 back to the store from which it was purchased and exchanged it for another HP 5740 printer.  After hooking up the second HP 5740, the same problems with copying occurred.  I returned the second HP 5740 to the dealer for a refund and left town for three months.  We recently returned and purchased a HP ENVY 7645 printer from another dealer.  We are having the same issues with this printer as we had with the two previous HP 5740 printers.  I discussed the situation with a level II supervisor at Comcast and he arranged for a new modem/router to be brought to the house and installed by a technician.  The installation occurred today and we are still experiencing exactly the same problem.  The Comcast technician who installed the new modem/router (who couldn't wait around while the printer sat idle) said that if the problems occurs after the installation, we should purchase a printer/copier from another manufacturer - or turn our printer "off and then on" when we want to copy.   He also asid that if this problem does continue after the new modem/router is installed, it definitely won't be a Comcast problem.  DOES ANYONE HAVE ANY IDEA WHERE I SHOULD GO FROM HERE?

    Hi @lamoso,
    Welcome to the HP Forums!
    I understand that your HP Envy 7645 will not copy after being idle. I am happy to look into this for you!
    I believe this is happening due to the printer going into sleep mode. As the options are for 5 minutes, 10 minutes, and 15 minutes for sleep mode to activate. I would recommend trying a hard reset, by going to this post,How to perform a Hard Reset, by @Rich1. It is important that the printer's power cable is plugged directly into the wall outlet, and not a surge protector. See this article, Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector for more information. This applies to Inkjet printers as well.
    After the hard reset, I would then make sure the printer's firmware is up-to-date. Getting the Latest Firmware and Product Updates.
    Let's see what happens after giving these two steps a try!
    Thank you for posting!
    “Please click the Thumbs up icon below to give me a virtual high-five for responding.”
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Installed new HD on Mid-2009 MBP, installed Mavericks, now getting "error code -50" after being on for a while.

    So I had the stock 320gb drive that came with my machine. It started crashing, so I pre-empted the loss of data and installed a spare Western Digital 500gb Scorpio Blue drive, installed Mavericks, and restored my data. Almost immediately I began having sporadic issues with the machine being unable to write to the disk, giving me "error code -50" after being on for about a day or so. I usually just restart and it will work for another day or so, but this is getting very tedious, and I'm a bit worried it might be straining the machine, since I can only hard restart (holding power button) when this happens. Usually, right after restarting, I repair the disk permissions, and this seems to fix things.
    Is this maybe a bad OS install? Maybe I should back up and try it all again? Or is there a software issue I'm not seeing a solution for anywhere? Most people who are getting the "error code -50" messages seem to be getting them on external drives. Is it just a compatibility issue and I need to seek a new drive?

    Thank you for the tips!
    OGELTHORPE wrote:
    I would check to see if the WD HDD has its own Sudden Motion Sensor.  If so, it may be coming in conflict with the one in the Mac.  If that is the case, I suggest disabling the SMS in the Mac.
    WD5000BEVT does indeed have it's own protection:
    ShockGuard™ - Leading-edge ShockGuard technology combines firmware and hardware advancements to protect the drive mechanics and platter surface to meet the highest combined shock tolerance specifications required for mobile and notebook applications.
    Source: http://www.wdc.com/en/company/pressroom/releases/?release=3cd471a1-66be-46ba-9f6 7-e15298b0f8a0
    Even though I read about it I had not touched any SMS settings in OS X since I did not have any problems before. I disabled SMS in Mac, let's see now.
    Melophage wrote:
    this could be indicative of a faulty internal SATA cable. /.../
    Reteep,
    you could try the same thing as well.
    In my case I doubt it is the problem because it worked fine before Mavericks, although forcing restart may have done something. I hope disabling SMS helped.

  • I have replied to you three times now without reply. I DID NOT authorise a payment of £9.99 for NowTV. What is the solution to getting my money refunded. I think you assume I will go away after being Ignored. No I will not go away. I find now that you hav

    I have replied to you three times now without reply. I DID NOT authorise a payment of £9.99 for NowTV. What is the solution to getting my money refunded. I think you assume I will go away after being Ignored. No I will not go away. I find now that you have DISABLED MY APPLE ID. Is this a punishment you use to anyone who takes up a stand against charges being made unauthorised on their account?. Please tell me why you have disabled my account. When will my account be restored? If not when will you refund ALL my purchases made to APPLE/ITUNES? I can then move on to another brand and hopefully better customer service. After reading articles regarding APPLE ID DISABLED it appears common practice from your company to DISABLE anyone's account if they question unknown charges. Please reply with your intentions regarding  the unauthorised payment and the DISABLING of my account.
    David Forrester.
    Sent from my iPad
    On 18 Mar 2014, at 09:20, iTunes Store <[email protected]> wrote:
    Follow-Up: 319042795
    Hello again,
    I wanted to send a quick note to see if you are still experiencing any difficulties with the iTunes Store. Resolving your issue is important to me, so please don't hesitate to reply if you need any further assistance.
    Sincerely,
    iTunes Store Customer Support
    http://www.apple.com/support/itunes/ww/
    Dear David,
    Welcome to iTunes Store Customer support.
    I understand that you have been charged an additional 9.99 GBP for a purchase that not authorized. I know how eager you are to know more about this purchase and I am happy to look into this for you.
    David, the purchase worth 9.99 GBP was for a day pass from "NOW TV for Apple TV." To review your iTunes Store account's purchase history, please follow the steps in this article:
    iTunes Store &amp; Mac App Store: Seeing your purchase history and order numbers
    http://support.apple.com/kb/HT2727
    Please reply to this email and let me know if this purchase was unauthorized.
    Thank you for being an iTunes Store customer. Have a great day!
    Sincerely,
    iTunes Store Customer Support
    http://www.apple.com/support/itunes/ww/
    Lang_Country: en_gb
    User Storefront: UK
    Concern Type: Problem Not Listed
    Web Order #:
    Content Title: NOW TV Day Pass
    Provider Name: BSkyB
    Track IDs: []
    Purchase Date : 2014-03-16 12:33:48 Etc/GMT
    Purchase Device : Apple TV
    Comments : I am being charged for what is listed plus another _9.99 for Apple TV pass. Did not authorise this _9.99 charge and not sure what it is exactly.
    <Personal Information Edited by Host>

    This is a user-supported board. You are not addressing Apple here. Nor is it a good idea to post your private information to a public forum. You should edit your post immediately.
    Unfortunately no one here can access your support history. You must respond to the emails directly.

  • I have bought an airport express after being assured that I will be able to print from my IPad. I have installed airport utility on my Hp laptop and it is configured correctly but the printer I have is showing neither on laptop nor on IPad. Can u tell how

    I bought an airport express after being assured that I will be able to AirPrint from my IPad. I have set up airport utility on my Hp laptop and configured it properly with the express. But still I'm not able to detect the printer attached to the USB port of airport express, neither on my laptop nor on my IPad. Can someone tell me if and how it can be done?

    Who assured you that an AirPort Express would allow you to use AirPrint from an iPad. They were incorrect.
    AirPrint from iPads and other iOS devices is only supported on a select few wireless network printers that expressly advertise that feature. An AirPort Express will not add that feature to a printer that does not support AirPrint. Also, for printers that do support AirPrint a wireless access point is not required since the printer needs to support wireless networks connections internally.
    The HP laptop should however be able to print to the printer connected to the AirPort Express. Try also installing the Bonjour Print Services for Windows. It will make printer discovery a lot easier when using Bonjour enable devices like an AirPort Express.

  • How can I get a family member back after being removed from family share?

    How can I get a family member back after being removed from family share?

    See [[Replace your Sync information]] but read the cautions carefully.
    * also see [[firefox Sync is not working]]
    It is always a useful precaution to make manual bookmarks backups
    * see [[Backing up and restoring bookmarks]]
    The above article also explains about the autobookmark backups that firefox generates, but be sure to make manual backups as you work, it is very easy to overwrite the wrong set of backups.
    I am not entirely certain what firefox is doing in your case, perhaps the synced Netbook does not have the expected set of bookmarks on it.
    Presumably sync may be uninstalled or disabled like any other add-on
    *see [[Uninstalling add-ons]]

  • Creative Zen's clock gets reset after being plugged into the w

    I bought the wall recharger for my Creative Zen 8 GB, as I had another MP3 player (SanDisk Sansa e260) die mysteriously after being plugged into the computer's USB port.
    The only complaint I have is that if I leave the Zen plugged in, after it finishes recharging, the screen goes blank and when I unplug it and turn it on, the clock and calendar are reset to their default (March 7, 2008).
    I am on a Vista Home Premium computer (no service pack). I have the latest the firmware on the player and use the latest version of Media Explorer.
    Does this happen to anyone else who uses the wall charger?

    Hello, I read your post & am replying to it because I too am having a clock syncronization issue but mine is not related to plugging it into a wall charger. My date AND time resets too to April 7, 2008 for some reason. I reset it yesterday to the correct date and time for yesterday (May 8, 2008) and now it is reset back to the previous date I mentioned. It couldn't even keep the time/date accurate for 24 hours! My battery was already charged however several days ago and is no where near being finished (it says half full). My firmware version is .2.0.
    Anyhow I know this doesn't help you at all, but at least you're not alone on this issue...mine doesn't originate with charging it though...maybe that will help you at the very least.
    Drew

  • Flash drive no longer works after being connected to a Windows XP machine.

    After being opened on a Windows XP machine, the contents of my flash drive now shows up on my Macbook pro as a single .lnk file. What happened? It's MS-DOS (FAT32).
    Is there any way out of this or has all my data been lost? I've never experienced this issue previously.

    Thanks. I've now scanned it with both Sophos and ClamXav and both have come up negative for infection.
    At least while the scan was running I could see that all my data is still there as the name of each file appeared as it was going through the scan.
    My efforts to sort this out seem to have made things worse as now it opens up word whenever I try to see the contents. I'll try it on a PC tomorrow and see if I can figure out what happened. Looks like the file system has been damaged in some way.

  • My iPod classis is not recognized by my Macbook and self-ejects immediately after being plugged in?

    Hello,
    I have an iPod classic and I am using a Macbook Pro running Mavericks. Since the last iTunes update i have not been able to connect my iPod to iTunes. I have tried both USB ports and it still won't work. The iPod ejects itself immediately after being plugged in. The usb ports are working, I've tried an iPod touch and an iPhone 4s, so that doesn't seem to be the issue either. Appreciate any help!

    Hi luisxjim,
    Thanks for using Apple Support Communities.  This article has some steps that may help if your iPod classic isn't being recognized by your computer:
    iPod not recognized in iTunes and Mac desktop
    http://support.apple.com/kb/TS1410
    Cheers,
    - Ari

  • Ipod disconnects immediately after being connected to computer

    Every time I plug my iPod into my computer it says "Connecting" then it says "Ejecting" and then "OK to disconnect"! WHY????? It does not show up in the sidebar in iTunes, and it does not show up in My Computer.
    I have plugged it into every USB port on my computer, none of them worked
    I have already updated iTunes.
    I have already put the iPod in disk mode.. that did NOTHING.
    I know it's not a problem with my USB ports, because other devices work JUST FINE in them
    I know it's not an issue with the USB cable because I plugged my iPod into another computer and my iPod did not disconnect right after being connected
    PLEASE help me get my iPod to work on this computer. And I don't want answers telling me to use the other computer. My Library is on THIS computer. Not only that, iTunes doesn't even work on the other computer.

    Reset the Bose device
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

  • I recently restored my iPhone 4s from back-up after being reset. An app that I had turned off in back-up did not show up in my recent resoration. I forgot to turn that app back on. Would there be any way I would be able to get the data from that app?

    I recently restored my iPhone 4s from back-up after being reset. An app that I had turned off in back-up did not show up in my recent resoration. I forgot to turn the app back on. Would there be any way I would be able to get the data from that app onto my phone? Is it possible to put an old back-up on my phone?

    LukaPetranovic wrote:
    Hello anita4323.
    I hope this will help you with your problem:
    Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support
    You can restore your backup whenever you want from iTunes or iCloud, depending where you made it.
    Let us know if you succeeded or need any further help.
    I believe you are missing the point. The OP has already restored from back up, but failed to include a specific app in the back up and is trying to recover data for it, which in this case is not possible.

Maybe you are looking for