MIGO Error : Message no. MLCCS009

Dear Friends,
I am facing a problem with MIGO, getting the error while saving the MIGO for GR, The error is
"MLCCS009 'Internal error in LMLCCS_UPDATEF02 LCL_TOOL method fill_key position A with RC 1"
The steps I was excuted : Tcode MIGO > given the PO Number > Given the Delivery Note Number > Hit enter buttun > Select the ITEM OK check box in bottom > click the SAVE button.
The the error is coming "
Internal error in LMLCCS_UPDATEF02 LCL_DB method get_normvector position A with RC 1
Message no. MLCCS009
Pls let me know how to fix and what is reason for this error????
Thanks in advance
Sridhar

Hello,
perhaps that is the solution of your problem
OSS Note: 708876
Symptom
The system generates error message MLCCS009 'Internal error in LMLCCS_UPDATEF02 LCL_TOOL method fill_key position A with RC 1.'
Other terms
ACTUPD, ACTCCS, MIGO, MIRO, MLCCS 009
Reason and Prerequisites
You have activated the material ledger with actual cost component split.
Solution
Check whether you have activated actual costing in Customizing for the material ledger. If necessary, activate the actual costing for all plants for which you have activated the actual cost component split.
If the problem occurs when you post invoices refer to Note 584904.
With Note 710808, the Customizing transaction for activating the actual cost component split is enhanced by a corresponding consistency check. In addition, a corresponding check is implemented in Customizing check-transaction CKM9.
Regards,
Dhanush.

Similar Messages

  • Cannot post Goods receipt in MIGO Error message"Field Business Area requird

    Hai
    I am posting Goods Receipt ( MIGO) with Reference to Purchase Order its having 47 Line item material. When i will doing Goods Receipt with rreference to po number its triggered error message in :Message No F5808 Field business Area is a Required  field for G/L account 1180 300000 . for only particular line item 47 material shown error..
    i checked all the settings in MM Automatic determination And G/L element, field variants, posting keys.. but everything configured profer settings..why particulat materail it shown error? how to resolve this error?

    Hi Thiru,
    A somewhat late aswer, but it might be helpfull for other users with the same problem. You can solve this problem by assigning the division/valuation area to the business area. Follow the path below to execute this:
    SPRO - enterprise controlling - Consolidation - Integration: preparation for consolidation - Preparation in the sender system - Further settings for Business Area Consolidation - Materials Management - Assign Division/Valuation Area to Business area.
    Under Enterprise structure -  Assignment - Logistics General, you will find a similar function. First execute option 1 or 2 here and then execute option 3. This makes it work as well, exept that it will not be recorded in a proper transport. The first option I gave for assigning is properly transportable.
    Greetings,
    Sjaak van den Berg
    Magnus Technology Consultants
    Edited by: S. van den Berg on Aug 14, 2009 1:09 PM
    Edited by: S. van den Berg on Aug 14, 2009 1:10 PM

  • Cannot create MIGO - Error message No. ME573

    Dear Expert,
    I cannot create good receipt for material import , there is an error mesage "transaction cannot be posted due to errors in price determination  For [x] error during maintain of delivery cost in master condition. delivery cost conditions in different validity periods not identical.
    is this error due to the change  of configuration we did to the enhancement LIV report, actually all the condition type is in amount but we make changes to it, we changed to percentage. these changes are made on 1st of March 2010. to all the PO created before 1st March 2010 we had made correction of their condition type to percentage but for PO that already had the shipping before 1st March 2010 , the condition type cannot be changed.
    I cannot create MIGO for this PO.
    is this because of inconsistency in config setting in PO document (condition type: amount), whereas in SPRO setting condition type has been changed to percentage.
    Please advice... what should I do to be able to create MIGO ?
    Thanks
    Pauline

    Hi,
    Please, kindly check also the attached note:                                                                               
    447374 - ME573 "Transctn cannt be postd due to errrs in prce detrmntn".                                                                               
    As this note states, there is a new system behaviour as of the              
    implementation of the also attached Note 446831. Please, check this         
    note 446831 for further information regarding the reasons.                                                                               
    This new program behaviour which initiates error ME573 can be               
    deactivated if necessary via a switch, as described in Note 447374.         
    Best regards
    Erika

  • Error message to Warning message in MIGO?

    Hi,
    When we are executing MIGO 411 K transaction we are getting error message 'Enter Vendor Number'. I want to supress change error message to warning message.
    Because my requirement is populate vendor dynamically based on combination of Material, Plant, Storage location and Batch. I got user exit for this User-exit (EXIT_SAPMM07M_001) when click on check button.
    We found a User-exit (EXIT_SAPMM07M_001) triggered when User clicks on 'CHECK' button. But since the vendor field (LIFNR) is a mandatory field in MIGO 411 K transaction, its throwing an error message 'Enter Vendor Number'. So unable to proceed further.
    so i want to change error message into warning message and then i will proceed.
    error message i m getting is " Enter vendor number for special stock k".
    Or is there any other to populate the vendor dynamically based on Material, Plant, Storage location and Batch. please help..
    thanks

    This error is dynamic call so you can't make this one as warning message but why don't you try to add the search criteria based on your requirement to the field of vendor in migo.
    e.g. when you do F4 or drop down you will see the list of vendor you can get from diff way.......so add one more earch criteria for your reqs here.

  • Need to convert Error message to Warning message in MIGO

    Hi Guys,
                   I need a warning message instead of error message in MIGO.
    For example if a material is having shell life expiry when i am doing GR,if I dont enter the Manufacturing date.Its gives a error meesage.
    The error message is in program MM07MMHD, MESSAGE e018(12).
    In configuration when i press F4 its has only one value 'E'.
    So how to change this to warning (W) instead of 'E'.
    Thanks,
    Prasad.

    Hello,
    Check the message in these T.Code and change category from E to W.
    OPJB for production messages
    OBA5 for CO messages
    OMT4 for material master messages
    OMCQ Batch and quantity related.
    Also you can check SE91 for this.
    Regards,
    Pallavi

  • Error message while doing MIGO.

    Hi,
    I am getting error message while doing MIGO. Can some one help me out in this issue.
    Consolidated companies 0 and 5686 are different
    Message no. F5 080
    Diagnosis
    The number of the affiliated company must be clear for the selected document type for all line items. In this case at least two different companies or a company in connection with a business partner who does not belong to a company are stated.
    Procedure
    If you selected the correct accounts, you must enter the document with a document type that allows cross-company posting. Otherwise, please correct the entered account.
    Thanks in Advance,
    Subhajo

    Check Fi customizing in OBA7.
    As you mentioned MIGO, I assume you are doing goods receipt, so you use document type WE.
    Within WE you must not have selected  the field inter-company posting .
    Best you place the cursor into this field and press F1 for detailed explanation,

  • Reg:Error message in MIGO Transaction

    Hi All,
    I added the new tab strip in MIGO Screen. now i need to make all the fields as mandatory. so using BADI (MB_MIGO_BADI) i gave the mandatory check ( if the Zfield = ' ', then error message) while clicking the check button before posting the material number. But it prevents to proceed further, simply it skips the transaction because of error message. and at the same time 'i should not use the information message'. my requirement is 'Error message should be populated after clicking the check button but it should allow to enter the mandatory fields after the error message'. i.e it should not skip the transaction after the error message.
    Please help me.
    Thanks & Regards
    Vijay.R

    Hi
    Probably the message is called dynamically, so u should try to check by debug when that message is raised.
    U can set a break-point for the statament MESSAGE.
    Max

  • Error message M7 330. u201CPrice of goods mvt will become negativeu201D in MIGO

    Hi Experts,
    Good day!
    I would like to ask question regarding transaction MIGO upon doing transaction MIGO i was able to arrive in an Error message M7 330. u201CPrice of goods mvt will become negativeu201D. Can you help me what are the cause why i arrived at the error?
    Hope to here from you all.
    ~Thanks so much!
    lourd

    Hi,
    Have look into the link, might be useful to resolve the issue.
    I think this situation can arise only if u have allowed negative stocks, in such case , it is possible that fresh GR is making the MAP -ve which is not allowed. Then as suggested u have to do MR21 to revalue the material to ensure MAP does not become negative after fresh GR.
    Check the OSS note
    if you can't solve the problem with MR21 then pls apply the note430954 (report MBEKBEAN should be in the system),
    Regards,
    Aditya

  • Internal order - error message M7064 when trying to post GR in MIGO

    Hi All,
    When trying to post GR against an internal order in MIGO system gives error message M7064
    "Document 000009000030   does not contain any selectable items"
    I'm not familiar with CO orders. What shall I check and how? Could you please help?
    In KO03:
    Status of order: REL  DLV  GMPS SETC VCAL
    Allowed transactions: I can see e.g. RMRU, RMWA, RMWE, RMWF
    Isn't it possible hat somehow the status of the order controls it? But how?
    Please help.
    Thanks,
    Csaba
    Edited by: Csaba Szommer on Feb 3, 2010 4:21 PM

    HI,
    I'm not sure if you got a chance to look at the long text of the error message, which shows the possible reasons and procedure to follow. You may want to check if any of these reasons applicable in your case..
    Diagnosis
    The document or document item entered cannot be adopted.
    Possible reasons for this are:
    The document items have already been processed
    (Suggest zero lines indicator set?).
    the document items have been deleted or are blocked.
    the document items have been created for a different plant.
    (for reservations only) movements are not yet allowed for the reservation items.
    (for reservations only) the document items are retrograde components of the order. These are posted using the order confirmations.
    A confirmation must exist for the document items.
    The document items must be released first.
    The document is an R/2 document.
    Procedure
    Make sure your entries are correct.
    If the system has already processed the total quantity, you can set the Suggest zero lines indicator. The system will suggest the quantity zero for the items that have already been processed.
    If you have entered a particular item, cancel the item. If you do not enter an item, the system searches all of the open items in the document.
    If the document is a purchase order, production order or a reservation, you can enter search criteria in the dialog box.
    You access the dialog box by choosing Enter with reference on the initial screen.
    If the document is an SAP R/2 document, you have to cancel it manually by entering the reversal movement type.
    Hope this helps.

  • Blank error message Message no. M7001 while doing MIGO

    Hi All
    I am performing goods receipt using MIGO tcode, everythings seems to be ok.
    even after clicking on Check button system is giving doc is OK.but when i click on post button a error message appears with no text, its blank. the message number is M7001. if any one of u have idea about this please let me know.
    Regrds
    Yogesh

    Yogesh,
    Hmm....I have seen this message before but I have no idea why the message text is blank. Message M7001 can be triggered in MIGO because of missing entries in various check tables and hence it it hard to pinpoint exactly what the issue is without knowing the message text.
    For example, it could be due to incorrect copy of your company code or plant, or something to do with the movement type you are using in MIGO.
    I would suggest you to check OSS notes for your SAP version/IS Solution or have an ABAPer debug the code to determine where exactly the error message is being triggered.
    H Narayan

  • Error Message when doing a Stock transffer using Mvt Type 309  using MIGO

    Hi Team,
    I am getting an error message M7-441 "Selection by multiple account assignment was not restricted", when doing a stock transfer.
    I am not able to understand the exact issue here, any help is appreciated.
    Regards
    Raj

    M7441 seems to be a new error message which came with EHP4
    I can only see that it is used in MB51 report (do you search for material documents in MIGO when you get this error?)
    according to the coding in my system this is just a warning message, not an error message, hence you could continue by cklicking the okay icon.

  • Error Message appeared while MIGO

    Dear Experts,
    we have creating new Plant with reference to old plant. While creating MIGO, following error message appeared
    u2018Busi area 1A not allowed for CoCode 1100; Check whether Busi area is blanku2019
    Message no. /EACA/GL_TOOLS006
    we had already assign business area to Plant with t code OMJ7.
    Regards
    BK GAIKWAD

    Dear Sir,
    We have received the solution. Actually we have given alphanumerical name for business area (like 1A) hence system given the error. now we have define new business area  as 111 (t code OX03) & assign the same in MOJ7.
    Regards
    BK GAIKWAD

  • How to pass error message for an additional tab strip in MIGO

    Hi,
    I have created one additional tab strip in MIGO transaction,In that tab i have 5 text fields,In that 4 text fields i want to make as mandatory fields,In the existing screen MIGO is using " Application log"  for passing any error message It is calling as include program in SAPLMIGO report program,In that "lmigolo2 " is the include program name.Now i am struggling how to make use that in my newly created screen.
    Regards
    Ambili B

    Hi rahul,
    Can u try these
    :Object failed to run due to an error while processing on the Job Server.
    2 )Object failed to run due to an error
    3 )Object failed to run due to an error while proc... | SCN

  • Error message in MIGO.

    Dear Sir/Madam,
    We have been using movement types 103 & 105 for GR.
    When doing 105 against a 103, system triggers an error message as under.
    Inadmissible movement type  - Acceptance at vendor set for PO item
    Message no. M7429
    Can you let me know the reason for this error message?
    Also, please suggest how to get rid of this.
    Thanks & regards,
    Siva

    Dear Mr. Vivek,
    Yes...
    It's working.
    The user has ticked "origin accept" in delivery tab for that particular line item thro' ME22N.
    I have removed the same and now the problem is solved.
    Thanks a lot...
    Regards,
    Siva

  • How to Setup Error Message in BADI Implementation in MIGO Screen?

    Hi anybody,
         I want to Setup error Message in MB_MIGO_BADI - Post Document Method.
    How do I setup SAP Standard Error Message?.
    anybody please tell me this is urgent......
    I will give reward for this answer.
    Thanks
    Regards,
    S.Muthu.

    Hi,
    Inside the user exits or Badi's the warning messages will not work. We are having two options for displaying the messages.
    1. Populate the warning message in the std message log.
    (Or)
    2. Use the Function Modules POPUP_TO_CONFIRM & POPUP_TO_INFORM and display the message.
    Regards
    Kiran Sure

Maybe you are looking for