MIGO - GR Against Purchase Order -  Delivery Note # not to Repeat !!

Hi all,
Here is a interesting requirement from the business user!!
Scenario: Currently they are making Goods receipt against Purchase order in Transaction MIGO. Delivery Note # (LFSNR) is entered during Posting.
Problem: Recently they did MIGO for Purchase order, by mistake they did Goods receipt twice for same vendor delivery note # !
Question: Can you please suggest a way to validate the Delivery note # field of MIGO, Such that it is unique. If the number is Repeated for the Same Vendor, system should throw a error message, stating that Delivery note # already exists. So that it avoids posting of GR for same delivery note even by mistake !!
I thought of validating this entry in MSEG Table, but problem is it will delay the posting of document !!
Is there a standard user exit or setting to validate this field during posting!!
Thanks in advance.
Regards,
Thiyagu

Joven,
If you see transaction VL31, Creation of Inbound Delivery, SAP did the validation for EXTERNAL ID in the Input screen of the Transaction. If we try to repeat the External id #, system throws error message as below.
"The external ID of the delivery note is not unique (see inb. dely
0180267952)"  Message no. BORGR547
When we make Goods receipt against Inbound Delivery instead Purchase order. We may over come the problem some how. Reason is that during Inbound Delivery creation itself External ID is validated. During GR against Inbound Delivery this External Id gets copied as Delivery Note #, so this is the alternative i thought !!
Thanks,
Thiyagu

Similar Messages

  • Delivery Date Monitor Against Purchase Order Delivery Date.

    Hi All
    Forgive me if I've posted this in the wrong forum area but I'm fairly new to this and have spent some time looking for a correct area but still not sure??? Anyway........
    ....I'm wanting to know if there's a standard SAP Report or anything that can tell me which deliveries from suppliers are late or due.  I can get out ABAPer to create me a new program to do this but I was hoping that there would be something standard.
    I want to look at the delivery date on my PO's and if the date is less than or equal to today and the parts have not been Goods Receipted, display them.  It would also be useful if we could see what was due in over the next few days.
    Again sorry if this is in the wrong section but any comments or suggestions would be much appreciated.
    Many Thanks
    Chris

    Complete.

  • MIGO error 'Purchase Order does not contain a confirmation control key'

    Hi,
    while posting GR to a PO i am getting an error ' Purchase order XXXXXXXXX does not contain a confirmation control key'
    it is true that i have not defined any confirmation control key in PO, Aknowled rerd checkbox is also not ticked
    Still why this message coming, what setting would be bringing this message
    Please clarity

    Hi,
    Until the installation of Note 589422 (with SP SAPKH46C43) you could  due to a program error - create a delivery even though the purchase order did not contain any confirmation control key.                                                                               
    This is now prevented through error message M7394. The transfer of this check (Confirmation control key existing in the purchase order, see Note 589422) was necessary as otherwise you could post a purchase order as desired. (Refer to also Note 616944 -> SAPKH46C44)
    589422 Several inbound deliveries can be created with MIGO :                                                                               
    "Implement the program correction.                                       
    With Transaction SE91 create message M7394 with the message text:        
    Purchase order & & does not contain a confirmation control key".         
    After you implemented this correction, when you want to create an        
    inbound delivery with Transaction MB01 or MIGO or with                   
    BAPI_GOODSMVT_CREATE and if the purchase order does not contain a        
    confirmation control key the system displays error message M7394         
    "Purchase order & & does not contain a confirmation control key".                                                                               
    Hope this can explain the error you met.
    Regards,
    Mauro

  • MIGO - Goods Receipt against Purchase order. PO rate dispaly.

    Is it possible to display purchase order line item rate in MIGO - Goods Receipt against purchase order - Quantity tab.
    In Quantity tab - System is showing Qty in Unit of Entry, Qty in SKU, Qty in Delivery Note, Quantity Ordered, alongwith these fields we also want display of Purchase order rate/each of that line item.
    Please guide.

    BTW you are getting PO number at MIGO and clicking over that you will get entire PO then why you want PO rate display here??

  • Purchase Order Response Not able to do by the Supplier from SUS

    Hi Experts,
    During sometimes, the supplier is not in a position to make POR from SUS.
    After selecting the PO from Supplier side, when they are trying to do POR they are not able to either select Confirm (tick mark) or reject (X mark) from their screen which means always those buttons are in greyed mode or no action like Green or Red respectively. What could be the reason ? However, they can see the Send button.
    Please provide me the input to do investigation.
    Thanks
    Rajesh K

    Hi Rajesh,
       If you are not able to respond for PO from SUS then you have to activate the workflow WS14500001.. Here some more workflows you can check for POR
    Workflows
    You can configure the following workflows for the purchase order response:
    ·        (WS14500001)
    Automatic transfer of purchase order response data into the purchase order. The system carries out a comparison during the data transfer (background processing). If the quantity, price, and delivery date variances transmitted by the vendor are within the tolerance limits set in Customizing, and no other variances are transmitted, then the data transfer of the first inbound POR occurs automatically.
    This workflow is relevant for XML receipt or manual entry with subsequent approval.
    ·        (WS14500019)
    If POR data differs from that in the purchase order, you can be informed of this via a work item. As a purchaser, you can decide for each item whether you wish to transfer the data into the purchase order or not.
    ·        (WS14500007)
    If POR data differs from that in the purchase order, you can be informed of this via e-mail (with the number of the purchase order).
    ·        (WS14500017)
    Monitoring receipt of the purchase order response:
    If the flag Purchase order response expected is set in the purchase order, and if by a certain time a purchase order response has not been received for all items in a purchase order, then you can be informed of this via a work item.
    SAP WON'T DELIVER ANY WF TEMPLATE WITH NUMBER RANGE OF '9' BECAUSE 99% CUSTOMER USE NUMBER RANGE 9' FOR CUSTOM WORKFLOW..
    Saravanan

  • 40000006573 purchase order does not exist

    hi
    40000005673 purchase order does  not exist

    true, it doesn't exist in my system either...
    Please spend a LITTLE more time on your..question if you expect help
    if I had to support you in this case the first thing I would do would be to double check that the number you entering is correct
    me23n
    migo
    If you know the number is correct and you get the same error from both t-code I would believe the message
    if the number may be incorrect search for the correct number with me2n, many options to refreence for P.O. search with me2n

  • Purchase order yet not released

    Hi sap gurus,
    i have done purchse order .then i am creating goods receipt for that purchase order but i am getting these error purchase order yet not released.plz tell me how can i solve these problem

    Hi Prasad
    Its simple prasad ur PO is suject to release strategy (Approval process) so the authorized person has to release the PO through the following process -
    Just go to Transaction ME29N or ME28, enter ur PO no.
    If u follow ME28 give ur release grp / code enetr PO no. and execute ur PO will be reflected in the list put the cursor there and press Release+Save Iconit will release the PO and then u will able make the GR.
    If u follow ME29N then give ur PO no. and go to release tab at the header level and press release icon.
    Best regards
    Vineet Baweja

  • Goods receipt for purchase order is not allowed

    Hi,
    When I am doing the PO receipt i am facing the error message "Goods receipt for purchase order is not allowed WBS element xxxxxx"
    What could be the problem
    Thanks
    Lucky

    Hi,
    Please check the WBS element in CJ03, in Basic Data, System status,
    Is the WBS is not released or blocked.
    Hope it helps you.
    Thanks

  • Error of PO - "Purchase Order Does not exists"

    Dear Experts,
    Here i am facing one error of Purchase Order Creation and its further processing.
    I have created purchase order and saved it, system issued message that, Purchase Order XYZ is created. (I have taken trial for 2-3 Purchase orders).
    When, i am posting Goods Receipt for the PO, system is issuing the error message, Purchase Order does not exists.
    Also in ME2M (PO list display) and Me23N (Display PO),
    system is issuing the same message - Purchase Order Does not exists, but in PO Creation it is generating Purchase order normally.
    Here is no matter of release strategy, because, PO release is not configured.
    Dear Experts, Please guide me on the issue !
    Thanks in advance !!!!

    there can be hundred of different reason for a failure. Most common reason is a problem with the number ranges, e.g. system tries to create a record with a number that is already there.
    This can happen if the number range was reset (or transported from a developement system).
    But transaction SM13 gives you all the details.
    There you see a line for each posting failure. Double click this  line again to get more details.
    There you will certainly find a line in red that indicates in which function the failure ocured.
    Double click this red line to get more info. Use the buttons above to see the content of the posting. For some failures you can create a dump that gives you much more details.
    Best you sit together with an ABAPer who can certainly tell you more how to read a dump and how to find the reason.

  • Document is in transfer for purchase order.Creation not possible

    Dear All,
    We did partial confirmation in EBP and later when trying to do confiramtion for the remaining quantiy getting the message"document is in transfer for purchase order.Creation not possible"
    We are taking this problem in production as well as in quality systems also.
    What are possible reason and how to solve it.
    kindly share your views.
    Thank you.

    Hi yshu,
    use tcode bd87 in SRM to check for failed confirmation IDOC (type MBGMCR).
    The double click the status record to see the exact cause of the failure.
    Rectify the error. Then try to execute the IDOC from BD87 tcode.
    For a few errors you may not be able to execute the IDOC but to create a new confirmation in SRM. In such cases, follow the below procedure..
    There should be an entry for the confirmation in the transfer table BBP_DOCUMENT_TAB in SRM. Display the details.
    Then run FM "BBP_DELETE_FROM_DOCUMENT_TAB" to delete the entry from the doc tab table.
    Then post a new confirmation in SRM.
    There is also a FM in SRM using which you can change the status of thefailed IDOC from 51 to 68 or 31.
    Rgds,
    MJ

  • Purchase Order is not created once in a while

    Hi All,
    I have peculiar problem that, when we are creating purchase orders some of the purchase orders are not existing even it gives message "Purchase Order created with purchase order number" is displayed.
    But if I try to create the purchase ordrer with same data it is creating, this problem is coming once in a while.
    points will be rewarded
    Regards,
    Venkat.

    customizing problem.
    or
    field mapping not correct.

  • Document in transfer for purchase order - creation not possible

    Hi Experts,
    we get this error when we do confirmation"'document in transfer for purchase order - creation not possible'"
    any inputs are appreciated
    Rg
    sam

    Hi All,
    We have resolved the above problem.
    When user does confirmation ,if it sucessfully  created then there will be  no entry in BBP_Document_tab table.If it's in error in process and next time when user tries to do GR then he will encounter a pop up message "Document in transfer for PO, creation not possible".
    So we need to delete the entries from table BBP_DOCUMENT_TAB using FM BBP_DELETE_FROM_DOCUMENT_TAB.
    Then check again in BBP_DOCUMENT_TAB now there will be noentry there...so now user can do the confirmation from SRM,he will not encounter this error now.
    Thanks to all the ppl who has replied
    sameer

  • Purchase order Item note

    Hi,
    I am displaying a Purchase order report. I need to display the Purchase order Item Note.Using read text i am unable to find out can any one suggest me how to find out.
    Regards,
    Raghu

    Try below code
    data : it_address type table of tline with header line.
            call function 'READ_TEXT'
              exporting
                client                  = sy-mandt
                id                      = 'F01'
                language                = sy-langu
                name                    = <CONCATENATE PONUMBER &PO LINE ITEM>
                object                  = 'EKPO'
              tables
                lines                   = it_address
              exceptions
                id                      = 1
                language                = 2
                name                    = 3
                not_found               = 4
                object                  = 5
                reference_check         = 6
                wrong_access_to_archive = 7
                others                  = 8.
    Regards
    Vinod

  • Error in MR11: One or more purchase orders were not updated

    Dear Gurus,
    While posting MR11 for a account assigned purchase order i'm facing a error as "One or more purchase orders were not updated" under message ID CKMLGRIR 003.
    Diagnosis: An error occurred during the update. As a result, an entire processing package of purchase orders could not be cleared.
    I checked with the PO and it looks correct.
    What may cause this issue? I'm using 4.6C release.
    Thanks in advance.
    Regards,
    RathiM

    Please check the SAP note below  :
    843022  MR11: Error log, purchase order number is missing

  • Without Purchase Requistion , Purchase Order should not be raised

    Dear All,
      Can any one tell me , How can i do the setting without purchase requisition , purchase order should not be raised.
    Regards
    Suresh

    Hi,
    1. Transcation code : OMET - Function authorization
    in that, there is one check box called REF TO PURCHASE REQUISTION under the section of possible reference object (2nd from top). Activate this check box.
    Assign this Function authorization key to the user profile.
    Now onwards, this specific user cann't create PO with out PR. 
    PR is mandatory for the PO creation for this user only. But other users can create PO, with out PR also.
    This is user level control
    2. Transcation: OMEC
    Select your document type and   note down some where filed selection key which is maintained for your document type.
    Transcation code :OMF4
    Navigation path : Spro-Materials Management-Purchasing-Purchase Order-Define Screen Layout at Document Level
    Select field selection key, which is identified in the first step and click on the details icon.
    Click on the "Reference data, item"
    set Purchase requisition as required (mandatory) entry.
    Now onwards, you cann't create PO with out PR number.
    This control is applicable for all the users. But for your document type only, which is used in the first step.
    For what are the document types used this field selection key, you can't create PO with out PR number.
    For other document types you can create PR with out PR number also.
    Regards
    KRK

Maybe you are looking for