Migratable Servers & Services

Hey everyone...
          For the purposes of this discussion, assume I've created two managed servers: "managedServerOne" and "managedServerTwo".
          I've been working with JMS on WLS and am struggling a bit with the semantics of migration. When I create and deploy a physical topic, I'm given the option of deploying to any (or all) servers in my cluster; I've noticed that in my list of potential targets, I see managedServerOne, managedServerTwo, managedServerOne (migratable) and managedSeverTwo (migratable).
          That's all fine and well, but I'm keenly interested in what actually occurs when I target my topic to a migratable server vs. a non-migratable server. The documentation seems rather vague as to just what makes a particular managed server migratable. I get that in the event of server failure, I can migrate the topic - but just what is it that I migrate?
          Any information would be warmly welcomed.
          Thanks,
          Cory

Hi
          First, I assume when you say you creat topic, you really mean you created a JMSServer that has a topic.
          Now, to answer your question, the "migratable" flavor of server target enables you to perform "service" migration, in the event of any failures.
          In order to have a valid "migration" configuraiton, you have to have more than one "CandidateSrvers" on the migratable target and select one of them as "UserPreferredServer".
          So, when you target a JMSServer to the migratable target, the JMSServer will be hosted by the current UserPreferred server. Later, user can perform the migration process, that will change the "UserPrefered" server from the current to new one from the list. This will internally cause the JMSServer to move over to the new "active" server, without loosing the service.
          The samething goes for JTA service.
          Please read my white paper to get more info.
          http://dev2dev.bea.com/technologies/soa/xmlmessaging/articles/ClusteredJMS.jsp

Similar Messages

Is there a way to update an external dictionary for services without migrating the services

Is there a way to update an external dictionary for services without migrating the services
Is there a way to update a common external dictionary used by many services without migrating each and every service that uses the dictionary. I have updated the table in the database and the external dictionary in our Development Environment. The external dictionary is used by many services. When I migrate the changed service to TEST/STAGE/PROD environments (NOTE: the table has been updated in the TEST/STAGE/PROD Databases), only the changed service is having the external dictionary updated. All other services that use the same external dictionary are NOT updated. I have the following questions
Is it possible to migrate dictionaries so that all the services which are using that dictionary are updated?
If the first one is not possible, Is there any other way to update the external dictionary without migrating all the services that use dictionary?

dont think so but I could be wrong
as it were I didn't like the build in audio so I connected some external logictech 2.1 speakers but there
are times when I use headset so I bought this one
or any minijack splitter will work too so I have 2 things connected to the headset port works just fine
http://www.belkin.com/IWCatProductPage.process?Product_Id=404634

How to migrate publish service from Lightroom 4 to Lightroom 5?

I have been upgrading from LR4 to LR5. Then I imported the LR4 catalog. But no Publish service was following to LR5.
I have used the FLICKR plugin a lot - made more than 80 FLICKR-sets. Therefore I would be terribly sorry if I do not succeed in restoring the contact to the old service files. Does anybody know how to migrate publish services from Lightroom 4 to Lightroom 5? Very fine if it's going to be a kind of a workaround.
Best regards
Jimmy

You'll need to backtrack a little, open your LR4 catalogue in LR5 and allow it to upgrade the catalogue with publish services.
If you've done work on images in the "wrong move" catalogue, identify those images, select them, and do a File > Export as Catalog. in the "right move" catalogue, bring this work in by File > Import from Another Catalog.
Alternatively, it may be worth looking at Jeffrey Friedl's Flickr plugin as he may have looked at this problem. Maybe someone here will know if it would help.
John

Issue in migrating analysis service job from one server to another

Hi All,
I'm migrating analysis services from one server to another, within the source server there is a job with the name
denreportingprocess which executes a batch file within local drive on server. I have moved all the analysis services cubes from the source server to destination and all the databases on the source server have been restored to destination.Verified
cubes are pointing to the correct database by modifying the connection string within the datasource part of the cube databases.
I have copied the entire process folder from source to destination and edited the code within the run file and code within the job pointing the locations to new server.
Below is the job code, it is running a batch file placed in E drive
E:\MSSQL10_50.MSSQLSERVER\process\run.cmd
Below is the text within the batch file (windows command script)
E:\MSSQL10_50.MSSQLSERVER\process\ASCMD -S "servername" -i "E:\MSSQL10_50.MSSQLSERVER\process\Process.xmla"
-o "E:\MSSQL10_50.MSSQLSERVER\process\Log.txt"
Below are the list of files within the folder E:\MSSQL10_50.MSSQLSERVER\process
ASCMD
process.xmla
Logs.txt
run
When I run the job it is failing with below error message
Ascmd: Exception trying to impersonate user: Access to the path 'E:\MSSQL10_50.MSQLSERVER\process\log.txt' is denied.
Ascmd: Execution failed: Access to the path 'E:\MSSQL10_50.MSQLSERVER\process\log.txt' is denied.
Thanks in Advance.
Regards, Kranthi

Hi Visakh,
Thanks for the reply, I have mapped the account under which the job was running to D drive, now it can access the file but job is still failing and error is not that informative.
Below is the error message with which the job is failing, where can i find this output file with errors
Executed as user abc_agent. C:\Windows\system32>E:\MSSQL10_50.MSSQLSERVER\process\ASCmd -S "servername" -i "E:\MSSQL10_50.MSSQLSERVER\process\process.xmla" -o "E:\MSSQL10_50.MSSQLSERVER\process\Log.txt" Microsoft
(R) Analysis Services 2008 Command Line Tool Version 10.0.87.5 X86 Copyright (C) 2008 Microsoft Corporation. All Rights Reserved.Ascmd: Check the output file for errors. Process Exit Code 1. The step failed.

Migrating Certificate Services to Server 2012 in a 2008 R2 AD Domain

We have a Windows 2008 R2 SP1 Active Directory domain. Our Enterprise Certificate server is running on Windows 2003 R2. We'd like to introduce a Windows 2012 server into our existing domain and migrate the Certificate Services to that new box. Are there
any 'gotchas' to implementing Certificate Cervices on a Windows Server 2012 system in a Windows 2008 R2 SP1 domain that we should be concerned with?
Orange County District Attorney

Hi,
You can migrate Certificate Services to another server but server name should be same. Also changing the server name which has CA role installed is not recommended.
AD CS Migration: Preparing to Migrate
Applies To: Windows Server 2003, Windows Server 2003 R2, Windows Server 2008, Windows Server 2008 R2, Windows Server 2012
http://technet.microsoft.com/en-us/library/ee126102(v=ws.10).aspx
Also I would request to post this question in security forum :
http://social.technet.microsoft.com/Forums/en-US/winserversecurity/threads
Also you consider, Windows Server 2012 General forum :
http://social.technet.microsoft.com/Forums/en-US/winserver8gen/thread
Best regards,
Abhijit Waikar.
MCSA | MCSA:Messaging | MCITP:SA | MCC:2012
Blog: http://abhijitw.wordpress.com
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees and confers no rights.

Need to migrate Shared services users and groups from 9.3.1 to 11.1.2.2 ver

Hi All,
We need to migrate Shared services users and groups from 9.3.1 to 11.1.2.2 version. Any help would be appreciated. Can we use CSS import export utility?
Thanks in advance!!

Hi John, In my another environment I have to migrate the users and groups from Hyperion HSS 11.1.1.2 to Hyperion shared services 11.1.2.2. I am using LCM for that, when I export the users and gropus from 11.1.1.2, it exports fine but when i import it to my 11.1.2.2 using LCM, I am getting the below errors.
Error when I try to import the groups:
ErrorEPMIE-00051: Failed to perform operation on role. Could not locate role matching filter {0} and filter attribute {1}. Please ensure that a role exists matching the filter with filter attribute.
EPMIE-00024: Failed to import all of the membership info for group test group. Invalid group members encountered. Please ensure the validity of members and its existence in their respective providers.
Errors when i try to import the users:
ErrorEPMIE-00051: Failed to perform operation on role. Could not locate role matching filter {0} and filter attribute {1}. Please ensure that a role exists matching the filter with filter attribute.
EPMIE-00020: Failed to update user 04668162 during import. Invalid identity for user. Please ensure that the user is available in the system with the identity specified in the import file.
Any idea?
Thanks in advance.

How to 'fail-over' CSS11503-AC when ALL 5 Reals Servers (Services) die

Hi all,
Could anyone out there possibly provide an idea/config, of how it is possible to'fail-over' a CSS11503 set-up in Active/Standby mode with "ASR" enabled when:-
- ALL your real servers(Services) for a particular VIP 'die'/OR nic is faulty.
- So NOT just 1 of the real servers, but when ALL 5 are not reachable, I need to 'failover'
My initial thought are to use the "critical reporter" or "critical service" to report back to the 'active' CSS.
Anyone who has done this scenario before , please advise..
thanks

Thanks very much Syed fo rthis.I was thiking that no-one could answer this query.
After a little tsting, I set the following config in the lab and it works but is different to yours. I cannot seem to configure the servive as "type local". When I input 'type ?; I get options such as nci-direct-return, nci-info-only, proxy-cache, redirect etc...etc..NO 'local'...!!
Please advise..Thanks in advance
************************* INTERFACE ************************* interface 1/1 bridge vlan 800 phy 1Gbits-FD-no-pause
nterface 1/2
phy 1Gbits-FD-no-pause
bridge vlan 20
nterface Ethernet-Mgmt
description "Management Interface"
nterface 2/1
description "1st ASR Link"
isc-port-one
nterface 2/3
description "2nd ASR Link"
isc-port-two
************************** CIRCUIT ************************** circuit VLAN800
description "FE_CORE"
ip address 192.168.83.249 255.255.255.0
ip virtual-router 1 priority 110
ip redundant-vip 1 192.168.83.148
ip redundant-vip 1 192.168.83.158
ip critical-service 1 DTSFE01
ip critical-service 1 DTSFE02
ip critical-service 1 DTSFE03
ip critical-service 1 DTSFE04
ip critical-service 1 DTSFE05
ip critical-reporter 1 Physical_if_DWN
ip critical-reporter 1 r1
ircuit VLAN20
description "LBAL"
ip address 192.168.20.1 255.255.255.0
ip virtual-router 2 priority 110
ip redundant-interface 2 192.168.20.3
ip critical-service 2 DTSFE01
ip critical-service 2 DTSFE02
ip critical-service 2 DTSFE03
ip critical-service 2 DTSFE04
ip critical-service 2 DTSFE05
ip critical-reporter 2 Physical_if_DWN
ip critical-reporter 2 r1
************************** REPORTER **************************
reporter Physical_if_DWN
type critical-phy-all-up
phy 1/1
phy 1/2
active
reporter r1
type vrid-peering
vrid 192.168.83.249 1
vrid 192.168.20.1 2
active
************************** SERVICE **************************
service FE01
ip address 192.168.20.183
keepalive frequency 2
keepalive retryperiod 2
keepalive maxfailure 2
redundant-index 4
service FE02
ip address 192.168.20.184
keepalive frequency 2
keepalive retryperiod 2
keepalive maxfailure 2
redundant-index 5
service FE03
ip address 192.168.20.185
keepalive frequency 2
keepalive retryperiod 2
keepalive maxfailure 2
redundant-index 6
service FE04
ip address 192.168.20.186
keepalive frequency 2
keepalive retryperiod 2
keepalive maxfailure 2
redundant-index 7
service NWFE02
ip address 192.168.20.204
keepalive frequency 2
keepalive retryperiod 2
keepalive maxfailure 2
redundant-index 10
active
!*************************** OWNER *************************** owner SERVICES
content DTS_192.168.83.148_443
add service DTSFE01
add service DTSFE02
add service DTSFE03
add service DTSFE04
add service DTSFE05
vip address 192.168.83.148
port 443
protocol tcp
advanced-balance sticky-srcip
redundant-index 1
sticky-inact-timeout 5
owner NW_SERVICES
content NWCS_192.168.83.158_443
add service NWCSFE01
add service NWCSFE02
vip address 192.168.83.158
protocol tcp
port 443
sticky-inact-timeout 5
redundant-index 2
advanced-balance sticky-srcip
active

Migration of Service/Category relationships

Migration of Service/Category relationships
We're still using ServiceMigrate with 2006.0.6. I'm trying to figure out if the relationship between a service and a category are migrated with a service, with a category, or both.
My use case is that currently a service is being displayed in two categories. I want to remove it from one of those categories. I can do that from either the category or the service to the same effect. So now that I've removed one of the relationships, can I migrate that to another environment by migrating the category, or do I need to migrate the service?

With ServiceMigrate, you can base the extract class on either services or categories. I would go with categories and modify the extract class released in extractclasses.xml as follows:

WLST : To create SAF Agent targeted on Migratable servers

I am trying to write wlst to create SAF Agent targeted on Migratable servers on existing file store and jms server.
cmo.createSAFAgent('SAFAgent');
safagent = cmo.lookupSAFAgent('SAFAgent');
safagent.setStore(saffilestore);
safagent.setServiceType('Sending-only');
cmo = cd('/SAFAgents/SAFAgent')
cmo.setTargets(jarray.array([ObjectName('com.bea:Name='jeem1 (migratable)',Type=MigratableTarget ')],Class.forName(weblogic.management.configuration.TargetMBean)))
I am getting error javax.management.invalidattributevalueexception array has at least one null element
Can somebody please help? Or can somebody let me know how to target SAFAgent to migratable target using wlst

If you are not aware of how SAP works you should be carefull to use any non-SAP tooling. For instance if you want to change anything to the database you'd better use the SAP-tooling, otherwise SAP checks will complain. But if you just want to use OEMGC to monitor a SAP database (or more SAP db's) that will give no issues. SAP does not support the use OEMGC for other purposes but monitoring (SAP note 828268). Be aware that SAP has it's own monitoring tooling(CCMS), so you will introduce extra overhead using OEMGC.
I advice you to first get familiar with Oracle in a SAP environment. As a starting point you could use http://www.sdn.sap.com/irj/sdn/ora.
If you need a un/pw ask your SAP-team.
Eric

Migrating KMS Services from Server 2003 Servers to Server 2012 R2

We have two Windows Server 2003 boxes that a previous administrator had setup as our KMS Servers.
These servers appear to be activating Office 2010, Windows 7, and Windows Server 2008R2 and 2003
I can see these activations taking place in the KMS logs on each server.
The question is what are the steps that we need to take to get the KMS Services migrated to Server 2012 without causing any activation issues in the current environment? I've be unable to come up with the proper order of operations from researching
blogs and I'm just not sure how to get where I need to go, what keys to use etc.
Since this was setup by a previous administrator, there is no documentation on what was done, what keys were used etc.
KMS Server 1:
slmgr /dlv
Name: Office(TM) 14, ProPlusKMSHost edition (Partial Product Key C6PWX)
Description: Office(TM) 14 KMS, VOLUME_KMS channel
Name: Windows(TM) Server 2003 KMS, W7R2-Kms3 edition
Description: Windows(TM) Server 2003 KMS, VOLUME_KMS_R2_B channel (Partial Product Key VX348)
KMS Server 2:
slmgr /dlv
Name: Office(TM) 14, ProPlusKMSHost edition (Partial Product Key 3T9QW)
Description: Office(TM) 14 KMS, VOLUME_KMS channel
Name: Windows(TM) Server 2003 KMS, W7R2-Kms3 edition
Description: Windows(TM) Server 2003 KMS, VOLUME_KMS_R2_B channel (Partial Product Key TT78P)
Of Note, we are a Microsoft Software Assurance customer and have Volume Licensing
In Summary, I would like to understand how to move my KMS Services to a new 2012 Server(s) and decommission the old 2003 boxes running KMS without disruption. As a final step I'd also like to be able to activate Windows 8, Server 2012, and Office 2013.

Hi,
If you wanted to slowly transition and verify... you could stand up new KMS host and make the priority of the SRV record lower so that clients will always connect to new server first and fall back to original box second.
Steps to migrating the KMS:
1. Uninstall the KMS host key first by running the following command:
slmgr -upk
2. Then, install the default kms key by running the following command:
slmgr /ipk [KMS Client Setup Key]
The default KMS client setup keys can be found here:
http://technet.microsoft.com/en-us/library/cc303280.aspx
3. Delete the record from the DNS:
Open DNS console:
Expand _tcp node under the domain.com. There will be a record _VLMCS. Delete this record.
4. The KMS server is uninstalled.
5. To install KMS on a new server, enter:
cscript C:\windows\system32\slmgr.vbs /ipk <KmsKey>
then to activate the KMS host, enter:
cscript C:\windows\system32\slmgr.vbs /ato
6. After activation is complete, restart the Software Licensing Service.
7. Verify that the record is created for the new server in the DNS.
To verify that the KMS host is configured correctly, you can check the KMS count to see if it is increasing. Run slmgr.vbs /dli on the KMS host to obtain the current KMS count. You can also check the Key Management Service log in the Applications and Services
Logs folder for 12290 events, which records activation requests from KMS clients. Each event displays the name of the computer and the time-stamp of an individual activation request.
https://social.technet.microsoft.com/Forums/windows/en-US/cd4177bd-8df5-4a66-afdc-c760398b7e7f/migrating-kms-server-from-one-computer-to-another
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Migrating shared services registry from version 9 to version 11.1.1.3

Good day all,
I'm currently doing a migration of Hyperion Shared Services from version 9.3 to version 11.1.1.3 on different servers. Right now, I have imported the users, groups, and the roles from version 9 to version 11, but I'm having troubles migrating its registry.
Could you please guide me on where to start on this process?
Thank you very much.
Edited by: 26FEB1986 on May 18, 2011 5:59 AM

Dude,
You may possibly get by using LifeCycle Managment. Have you tried that?
http://www.artofbi.com/index.php/2009/08/hyperion-11-lifecycle-management-lcm-in-action-part-1/
You may have to tweak the resulting output files a bit for version 9 vs 11 but this would give you a good starting place.
Please award points if that helps.

Problems with one of the front-end servers (service wont start)

Hi,
Having a pool with two front-end servers (Lync Server 2013 on Windows Server 2012) and I cannot get one of servers to work properly.
The Front-End service is not starting.
Have removed both servers from the topology and installed one at the time. When adding the second server to the pool the service never starts, its in starting state and a bunch of error messages appears:
- Server startup is being delayed because fabric pool manager is initializing.
Cause: This is normal when Pool is bootstrapped and indicates that the Front-End is waiting for a quorum of other Front-Ends to be started.
- Pool Manager failed to connect to Fabric Pool Manager.
Cause: This could happen because insufficient number of Front-Ends are currently active in the Pool.
I have tried restarted one at the time, both at the same time...
Reset-CsPoolRegistrarState -ResetType QuorumLossRecovery
Reset-CsPoolRegistrarState -ResetType FullReset
I have also had a look at the kb saying that there could be a certificate issue. So I have ran that script but no certificate is misplaced in any store.
I have removed the front-end certificates and requested new ones from the internal CA, I have also done the same to the OAuth certificates.
How to proceed?

Hi there,
if you are still receiving, the same error, please try to shutdown the first Front-End Server, and give time for the services to start, however I would like also to add that with Lync server 2013 the Enterprise pool requirements is to have 3 Front-End Servers
in a pool instead of 2, because of introducing the brick model architecture.
Regards,
Charbel Hanna
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread

Migrating Reporting Services to new Server - Subscriptions are not transfering

Hello,
I have an instance of SQL Server 2008R2 running on Windows Server 2008. It is setup to be a reporting server. There are many subscriptions that are scheduled and run on this server. We are wanting to move to Windows Server 2012 and SQL Server
2012. So, we have built out a new VM and I have exported from the current server the ReportServer and ReportServerTempDB and have imported them to the new server. I have resolved the one Orphaned user that happened and went to look for the subscriptions
so that I could disable them so they wouldn't run. I could not find any.
select * from msdb.dbo.sysjobs where enabled = 1 and category_id = 100.
no rows...
I had read from other posts to let it sit for a few days and they will appear. I have waited 2 weeks.
So, what am I missing? I would prefer to do a clean install and migrate the data over rather than upgrading the OS and SQL.
Thanks

Hi Sql Dude,
Per my undersranding that you can't find any informamation related to the subscription in the sydjobs table after migration, right?
You issue can be caused by many factors.Please check details information below:
Please check if you can see all the subscription in the report manager and can create new subscriptions. The ReportServer database used by SSRS to store the subscriptions maintains a record of the subscription owner (as well as audit fields) which track
the user accounts that have created/modified the subscriptions.
If you can't see subscription on the report manager and can create new subscriptions, the issue can be caused by "My subscriptions" had been created on the original non-domain server(Local User account). Therefore, once the instance was migrated
to a new server on the domain, said Local User was no longer available. Every user with access to the ReportServer database has an entry created in the Users table and a unique GUID generated.
To work around the issue, you can do a SQL Update query to changed the OwnerID and ModifiedByID fields on the Subscriptions table to relate to the GUID of the equivalent user on the domain.Tip:
Change the Owner of SQL Reporting Services Subscription
If you can see all the subsription on the report manager but can't find any job, please try to edit and update the subscription to see if it will recreate the job again and please also try to provide more details information in the log file to see if you
got some error message, the path like:
C:\Program Files\Microsoft SQL Server\MSRS11.SQLEXPRESS\Reporting Services\LogFiles
If above didn't help, please reference to the similar thread below:
Can't access SSRS 2008 R2 subscriptions after migration
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

SQL 2012 Management Studio Remote Servers Service Status Slow/Stops Working

This is a huge annoyance. I manage about 50 SQL instances of SQL Server versions 2005-2012 and I noticed that it takes 1-2 seconds to load the service status (green arrow) on each individual server. If you then connect to a server, you have to
wait for all the statuses to be loaded first in the Registered Servers list before it loads the statuses for servers in the Object Explorer. This happens whether the servers are registered in Local Server Groups or Central Management Servers, and whether
I have access to all servers (as windows local administrator and sa), or not. It also happens regardless of whether I run as Administrator or normally on my instance of SSMS (which is SQL 2012 Development on Windows Server 2008 R2).
These servers are also registered in alphabetical order by group and server name, which means that if I have "DEV" groups, they will be registered before "PROD", unless I rename accordingly. It sometimes takes a few minutes, if
I'm lucky, to get a server I connect to to load, which means I can't use SSMS to really manage any remote servers and start/stop/pause/resume/restart services.
Worse, sometimes due to a server becoming unavailable (due to updates/patches/failovers), SSMS is unable to load the service statuses anymore for any new server connections made to object explorer, resulting in the loss of ability to view/change service statuses.
In this case, there is no way to recover (Refresh of Central Management Servers does nothing), except to close SSMS and open it again, and then wait again for all the statuses to load.
I have lived with this since first installing SQL, and regardless of the Windows Updates and SQL patches applied, the problem has never gone away. This also happens if I load SSMS in Windows Server 2012. Its starting to become a huge issue now
that I have to patch several servers each month.
I have already checked WMI permissions, GPO, firewall, etc. as per all the suggestion on the internet, including this post
http://www.sqlservercentral.com/Forums/Topic825246-146-1.aspx. None of these suggestions have made a difference, as my real problem is one of connectivity and performance, and
not security, which most of these suggestions apply to. Of note, all servers are in the same domain, firewall is disabled across the board, correct permissions for local administrators exist for remote registry settings, WMI, GPO, etc, and all service
accounts and windows accounts that are used are local admins and sysadmins.
My work-around has been to delete the Central Management Server and any local server group registered servers, close and re-launch SSMS, and then connect to a server I'm interested in via Object Explorer. Otherwise, close and re-launch will take forever.
My other alternative is to RDP into the remote server and manage services via SQL Configuration Manager locally.
If anyone has any ideas on how to fix this, or make it go faster, I'd really appreciate it.
Diane

Hi Satish,
Thanks for taking the time to reply. Yes, I actually am already using work-arounds (i.e. methods other than SSMS) to accomplish my tasks. My issue is that this is supposed to be working and provide a nice GUI so that you can easily visualize
any issues, and address them directly, without having to hodge-podge access via scripts or 3rd-Party tools.
Since no one else has any comments, I guess there are no plans to make remote server administration work with SSMS properly then, and that kludge methods are the only ones being advocated.
Diane

MSCS H/A enqueue, replication and message servers services

Hi,
I'm looking at the documentation about "Installation of multiple SAP Systems in MSCS: MSSQL Server" but I have a few questions about the SCS and ASCS process.
Are the process setup as generic cluster service? Or are they SAP provided cluster services?
What monitoring is done with the the enqueue, replication and message server services in the cluster?

Mike,
The SAPINST installer will install SCS and ASCS services into MSCS for you. They are installed inside the SAP group in cluster.
The message servers, controlled by either SCS is HA with MSCS. The enqueue services is HA with installation of ERS locally on both nodes. SCS + ERS + ERS provides a triangular HA that means the services is always on and can withstand an cluster failover. The cluster only controls the SCS service. The ERS services are local to each server.
Let me know if I did not answer the question.
jwise

Migratable Servers & Services

Similar Messages

Maybe you are looking for