Migrate invoice printing to adobe forms

Hi all,
I want to evaluate ADOBE forms in order to decide whether it is useful to migrate SD printing from SAPScript to ADOBE forms.
To do that I would like to print a sample form (invoice) with this technology. Is there a sample form and a sample interface that could be used for invoice printing?
How do I have to customize the output type to make it work with ADOBE forms?
Thank you for any hints.
Regards
Norman

Hi,
migration from script to adobe is a big problem.
dont go for that.
many problems will come after migration, the time to take rectification is more than the development directly.
Thank U
Jay----

Similar Messages

Check Printing in Adobe Form

Hi,
My requirement is to modify the layout of Check Printing program RFFOUS_C from SAP Script to Adobe Form. I am using ECC6.0. I went through the code, and figured out that include RFFORI01does the check printing part using Open_Form Function module.
Also going through other threads, I figured out that there is no exit in the program RFFOUS_C and the only way to modify it is create a copy of that program and add changes to ZRFFORI01. In the adobe form, apart from normal check printing, i need to add few fields from HR module too.
Any help/ sample code, on how to incorporate this, would be really helpful as I am new to ABAP.
Thanks,
Anusha

Hello Anusha,
Did you get a solution for your problem on having to print an Adobe form instead of a SAPScipt for the payment program RFFOUS_C?
I have a similar requirement and will appreciate if you could reply sharing your experience and how you went about with your solution.
Thanks in advance.
Shivani.

Problem in Dierct print of Adobe form

Hi all,
My requirement is to print the Adobe form directly.when user execute the particular Z transaction. Then the form should be print.
I have given all print parameters to the FM FP_JOB_OPEN.I am using ADS.
But i am getting the print when I excute that Z-transaction with below message
<b>PDF file not printed. 128 MB of memory is required to enable direct PDF printing</b>. What might be the problem.
Thanks in advance.
shaleen
Message was edited by:
shaleen mohan

Hello,
we have the same problem here.
Printer seems to need 128MB physical memory, anything less results in the "PDF file not printed. 128 MB of memory is required to enable direct PDF printing" string or just cryptic signs.
Printing via the adobe reader works fine on the same printer.
In most scenarios direct printing is needed but its not sure if the attached printer have the minimum required memory.
Is there a chance to do direct print with less than 128MB physical memory?
Faking 128MB to windows does not work.
Thanks & Regards
Thomas

How to Migrate SAP Scripts to Adobe form

Hi,
Can yo uplease tell me step by step how to convert/migrate SAP Script to Adobe forms.
Thanks,
Rajeev Gupta

Hi
Transforming SAP Scripts - > Smartform -> Adobe Forms is the right way.
refer this thread...
[Re: Convert SAP Scripts to Adobe PDF Forms|Re: Convert SAP Scripts to Adobe PDF Forms]
Regards
Raj
Edited by: Rajasekhar Dinavahi on Dec 9, 2008 5:25 AM

Standard text having '&ULINE&' not printed in adobe form????

I have a standard text in so10 which is to be used in my adobe form .
The standard text uses '&ULINE&' to print a line . This when used by script was interpreted and a line is being printed.
But when the same standard text is inluded in the adobe form , it throws a runtime
error saying that " Field '&ULINE&' does not exist".
Could some one help me out how to get this standard text printed in adobe form.
Thanks and Regards
Tejaswi Surapaneni

Hi Tejaswi,
Have you checked this wikilink:
http://wiki.sdn.sap.com/wiki/display/ABAP/UsingofStandardText%28SO10%29+inAdobe+Form
Regards,
Vaibhav

Duplex Printing of Adobe Forms.

Hi All,
In our project we are making use of adobe forms. Currently if we print the forms, then they are printed only on one side of the paper. Could you please let us know, if it is possible to provide the duplex printing option? If yes, please let us know how to achieve the duplex printing functionality?
Thanks,
Manohar Dubbaka.

Hi All,
The duplex printing of the adobe PDF forms can be achieved by setting the parameter available on Master Page of Adobe PDF.
This option is available in Adobe Live Cycle Designer 8.0 version.
The option is in the object view of the master page.
Master Page->Object->Pagination->Print on Both Sides.
Since we got this option, we did not have to change any XDC files.
Regards,
Manohar Dubbaka.

Migrating SAP Scripts to Adobe Forms

Hi All,
   We are going for a new Rollout in US based on our European implementation in 2001 which was on
   4.6b. Eventually this system was upgrated to ECC 6.0 recently however all the outputs are still using
   SAP Scripts.
   For the new Rollout in the US, we are planning to migrate all these outputs to Adobe Forms. Does
   anyone know if there is an easy way to migrate Scripts to Adobe Forms or else the migration is more
   or less like fresh development.
   Please share your experiences/knowledge if anyone has worked similarly. Thank you all.
Regards,
Vamsee

Hi,
migration from script to adobe is a big problem.
dont go for that.
many problems will come after migration, the time to take rectification is more than the development directly.
Thank U
Jay----

Migration of smartforms into adobe forms

hi,
After migration of smart form into adobe form, while checking( syntax ) the error message will be displayed like the Sender Country is not filled. if i fill the sender country then only the adobe form activate but no sender country is provided in smart form. how can we rectify this problem in migration of smart form into adobe forms ( Address node ).
sender country is not mandatory in smart form but comes into adobe form it is mandatory. How can we handle this type of issues.
Thanks&regards,
Ashok Reddy

Hi Aravind
Have you checked the following threads before posting
Smartforms or Adobe Interactive Forms?
Regards
Sachin

Page print in Adobe Form

Hi Friends,
I developed a Adobe form with 2 master pages. I dont want to display my 2nd Master page if a field eq 'MANAGER'. This field is displayed on Master Page. When I am giving print my 2nd page is also printing I dont want my 2nd master page to print if the field is 'MANAGER'. How can i do this ?
How can we do this in javascript or in Formcalc. ?

Or You can do this...
Create a Subform in the first page , create the condition for that only if the particular field is MANAGER then only this should be displayed. HIDE the subform , in the properties you can check.
This subform properties Place that on Top of Next page or choose the Master page content area which you want.
So when manager only this forms will trigger and the corresponding details will be shown.

How to print interactive adobe form in ABAP ?

Dear all,
I've create a static adobe form in ABAP environment using SFP transaction. But when i build the form and test print out, system raise an error "<b>Device type unsuitable for ADS documents</b>". So, which device type should I use to print ADS documents ?
Thank you very much for your help,
Best regards,
Sylvecast.

The printer selected for output must support Adobe forms (the default "local" printer does not). If you don't already have a printer that supports Adobe output, you can create one via SPAD using (for example) device type PDF1.

Barcode printing in ADOBE form when data and Barcode are in different pages

How to send raw value to the Barcode when data values are availabe in Master page and Barcode in the Design page.
Barcode needs to print once on the first page, so it is on Designer page.
Values needed for display of barcode is avilabe on Master page.
How to communicate data between Master page and Designer Page in ADOBE Form?

Hi,
Declare a variable of character type and concatenate DTAP and Bar code value into that variable.
Later print that in required bar code format.
Try this.

How to print an adobe form with xml interface in r3

I have a Web dynpro application that creates an ADOBE form using an XML schema interface.
I need to be able to print the same form in R/3 - is this possible? If so how do I create the interface?
Thanks

Hi,
I am not sure if I understand your question correctly. The following NetWeaver documentation might be useful for you https://help.sap.com/saphelp_nw04s/helpdata/en/a1/40aac795a243cebdcff368491c659e/frameset.htm Check section Example: Calling Forms in an Application Program. You need to get a name of the corresponding FM using FM FP_FUNCTION_MODULE_NAME.
Regards

Unable to print the adobe form Genrated by webdynpro

Hi Experts,
I have generated a adobe form using webdynpro Java. It sucessfully loading the adobe form in the browser but when I click print button above the form. It just opens acorbat reader console and doesnt print the form.
Is there any additional settign to be made to acheive it.
we are using WAS 7.0 and acrobat reader 8.0
Your suggestions are highly apprecited.
Thanks,
Raj

Hi Raj,
Try this out. You can put the print button in the Form itself.
Go to Library -> Standrad -> Print Button
Drag the print button on to the form.
Try printing the form by clicking on the print button.
Cheers
Satya

Printing all Adobe form in one attempt

Hello Experts,
I have one print program where I am generating Adobe forms. If I enter 10 pernrs in the selection screen.. I will get 10 adobe forms in the output. By clicking right/left arrow in the application tool bar which appears if there are more than one form generated, I can see all forms and I can print each form.
Now the problem is, I got the requirement where I can click on one push button or icon on the output screen and It should print(sending to Printer) all 10 forms in one attempt.
Please let me know if you need any further information on this.
Thanks,
Naveen Inuganti.

can you please elaborate what exactly do you need?
Say we developed report to generate pay slip for employee.
What my program is doing now..
I can enter one or more employee IDs in the selection screen and I can see one or more statement in the output
If we have more than one statement, I should click on right / left arrows in the application tool bar
As you know we can take print out for each form
Now user wants to have push button, Where he/she can click on it and get all forms print.
Note that its not output display.. its all about paper print outs. Still we can display statements separately. In fact we should.
Thanks,
Naveen.I

Migrating Jetform layout to Adobe form layout

hi,
Now am involved sap 4.7 to ecc6 upgrading project.
what are steps to migrate jet forms to adobe forms without affect layout?
Thank you..
Regards,
B.C.Ganesh

Hi there,
Thanks for your reply.
I want to convert the existing smart form to Adobe Interactive Form.
Thanks,
Praveen

Migrate invoice printing to adobe forms

Similar Messages

Maybe you are looking for