Migrating AIA FP v2.3 processes to AIA 11g

I have installed the latest version of AIA on 11g and am looking to migrate my existing AIA foundation pack (v2.3) processes into 11g.
When I look at the migration guide documentation it seems to suggest that the migration utility only supports AIA FP v2.4 and v2.5.
Does anyone know what the limitations are with FP v2.3 and why the migration tool won't work.
I am yet to try running the migration and there is a chance that it could work but prior to going through the pain, I would like to understand what issues I may face and why it is specifically documented to support just 2.4 and 2.5.
Regards
Stuart

Hi Stuart,
There are no limitations with migration tool. It has been extensively tested and certified with 2.4 and 2.5 services.
IMO we support upgrade/migration only from last two released versions, someone can correct me here.
Ideally migrating services from 2.3 should work, but again I have never tested this myself.
Regards,
Narayana

Similar Messages

  • AIA 11g Erros with AIAB2BErrorHandlerInterface (1.0)

    We have installed AIA 11g. After the installation, some of the composites on EM are showing as not available or errored out .. e.g. On em, when we click on AIAB2BErrorHandlerInterface (1.0), it says "The composite AIAB2BErrorHandlerInterface (1.0) is not available. This could happen because either the composite has been undeployed or soa-infra has not yet loaded this composite. Unable to register service." .. We tried to redploy, but its erroring out again .. We have the same issue with other installed AIA componsites, i.e., AIAB2BInterface, ReloadProcess, AIASyncErrorHandlingBPELProcess ... the installation log has the following ..
    [deployComposite] setting user/password..., user=weblogic
    [deployComposite] Processing sar=/wdev/apwdev/AIA/Infrastructure/B2B/src/AIAB2BInterfaceApp/AIAB2BInterface/deploy/sca_AIAB2BInterface_rev1.0.jar
    [deployComposite] Adding sar file - /wdev/apwdev/AIA/Infrastructure/B2B/src/AIAB2BInterfaceApp/AIAB2BInterface/deploy/sca_AIAB2BInterface_rev1.0.jar
    [deployComposite] Creating HTTP connection to host:mdcapp41.na.ops.local, port:8010
    [deployComposite] Received HTTP response from the server, response code=200
    [deployComposite] ---->Deploying composite success.
    [echo] AIAServiceConfigurationProperties.xml does not exist in /wdev/apwdev/AIA/Infrastructure/B2B/src/AIAB2BInterfaceApp/AIAB2BInterface
    [echo] oracle.home = /oracle/wdev/apwdev/FMW/Oracle_SOA1/bin/..
    Is the culprint "AIAServiceConfigurationProperties.xml"?

    Hi,
    we edit the setDomainEnv and setSOADomainEnv and change USER_MEM_ARGS to the following entry:
    USER_MEM_ARGS="-Xms512m -Xmx2048m -Xss256k -XX:+UseParallelGC -XX:GCHeapFreeLimit=20 -XX:PermSize=128m -XX:MaxPermSize=512m -XX:NewSize=128m -XX:MaxNewSize=256m -XX:SurvivorRatio=5"
    We run AIA 11g on a small Linux system with 5,6 GB RAM and one with 12 GB RAM. We have no problems with composites or out of memory exception.
    Best regards from Karlsruhe
    Marcel

  • Ebi:getConvertedDateWithTZ   XPATH function in AIA 11g?

    Hi all,
    There was an XPATH function available with PIP module to convert the datetime into a particular format.
    xmlns:ebi="http://www.oracle.com/XSL/Transform/java/oracle.apps.ebi.core.xpath.EBIXPathFunctions" ebi:getConvertedDateWithTZ .
    Can anybody point me which jar contains the 'oracle.apps.ebi.core.xpath.EBIXPathFunctions' class? Is this jar available with AIA 11g?
    Rgds.

    I understand your reply and we are already doing that.
    the osb installation is common across the domains .but i need these custom xpath function reflected only for my domain.
    so my query is "whether we can set/overwrite any -D property at server startup or any server/domain level settings rather than updating the installation path?"
    I am just trying to understand whether we can avoid conflicts with multiple domains sharing the same installation.

  • Installing AIA 11g on top of SOA Suite 11g

    I have installed SOA Suite 11g (11.1.1.5) as per Oracle Installation Guide. The installation is successful and SOA Suite 11g is working fine!
    Now I need to installa AIA 11g.
    1) Currently I have Oracle XE database. Do I need to uninstall it and install Oracle 11g DB?
    2) If yes, do I need to uninstall SOA Suite and install it again after DB installation?
    Please advise.
    Thanks

    Its always better to have Oracle 11g database, against XE database.
    You dont need to uninstall the SOA 11g, just make sure you have the Compatible Oracle 11g database version, create the RCU, then you have to point all the JNDI which is available in SOA 11g to new database.
    Check in metalink.oracle.com. You should get a note explaining, about how to change the RCU pointing.
    Thanks,
    Vijay

  • SOA 11g + AIA 11g+ Patches

    Hi All,
    i want to know about all the patches required to integrate SOA 11g with AIA 11g...
    and all the patch required for PIPs ...that is common among all
    plz help me if any one knows about that..
    Thanks,
    Shruti

    Hi Shruti,
    For the successful installation of AIA 11g u need to apply the DSTv13 patch 9146268 on database to avoid the 'Time zone not found' issue while installing AIA 11g.
    Metalink notes: 756454.1 and 975450.1 would be helpful.

  • AIA Demo for AIA 11g

    Hi,
    Is there a documentation that gives some details on how to perform AIA Demo installation on AIA 11g which is runing on a WLS 10.3.3 cluster ?
    I am trying to use GettingStarted_E17359-01.pdf available as a part Article ID 1087345.1, but that is of not of much help. I need to know if it works fine and how to test a SOA setup with OSB and AIA in it.
    Thanks

    You can find all details on the installation of the AIA Demo in the Install Guide (V20870-01). Essentially you only run a single script for deploying the entire demo including DB schema, middleware configuration, J2EE apps, and SOA composites. Read the install guide carefully, in particular make sure to assign enough heap space (2GB) to your managed server ahead of demo deployment.
    Note that the AIA Demo 11gR1 does not leverage OSB at this point. But you can certainly use the demo as a starting point and add OSB services to the flow. E.g. a natural use case for OSB would be to virtualize application endpoints. So you could build a wrapper service for demo application services like the StoreFront service (which is an ADF based web service) and refer to this new wrapper in the AIA code. This is just one example, I am sure you can find many other places where OSB would fit into the picture.
    Another note: you should go for SOA 11.1.1.3 if you intend to use OSB as this release provides the direct binding between SOA and OSB. In the case of running AIA 11g on SOA 11.1.1.3, don't miss to apply patch 9717829.
    Gerhard

  • AIA 11g - When will PIPs released?

    Hello,
    is there a roadmap when the pips for aia 11g will released?
    Regards,
    Marcel

    Last I heard will be release by Oct/Nov timeframe. Again it depends on the PIP you are looking far. Please check with your Oracle rep.
    Thanks.

  • AIA 11g installation

    Hello,
    Could you explain me the use of oracle service registry in AIA 11g ?
    Is it mandatory ? If not, how OSR is replaced in AIA11g ?
    Any help appreciated. Thanks in advance.
    -Rupesh
    http://orachat.com

    Hi,
    OSR is no more in use in AIA 11g.
    AIA Foundation pack comes up with two new features for registering the services & AIA components.
    1. Project Lifecycle Workbench(PLW)
    2. Oracle Enterprise Repository.(OER)
    AIA leverages harvesting the services in the above mentioned utilities. Harvesting the services in PLW & OER are done through ant scripts which comes along with Foundation pack.
    I hope this answers your question.
    Regards,
    Rahul

  • No BSR in AIA 11g?  only OER or OSR?

    Can you please help me understand what will be used as SOA repository in AIA 11g? If you don't have license for OER or OSR, you cannot have SOA repository in AIA 11g?
    Please help.
    Thanks.

    AIA heavily leverages SOA to achieve application integration. As such, we introduce large volume of SOA assets, including various types of services (of different architectural significance, such as EBS, EBF, ABCS, and etc.), objects, and etc. The visibility to these assets are achieved via SOA Repository. Here I'd like to make a specific differentiation between 'integration' and 'visibility'. These are two different value propositions / problem spaces achieved via two distinct oracle product lines.
    Out of box, AIA have pre-built integration with Oracle's SOA Repository (OER). It includes
    (1) solution pack: bundle of all pre-built AIA services and objects .For the 11gR1 AIA release (FP-only release), it contains the entire Enterprise Object Library definition
    (2) AIA extended harvester: allow users to harvest their custom-built, AIA-compliant SOA composites and etc.
    (3) Documented best-practices: while users may execute AIA harvester any time one chooses to, there are a number of key lifecycle milestones for which the harvesting shall be run and be conducive to the overall SOA development lifecycle. The AIA Dev. Guide outlines that. Further, AIA development topology and its uses of OER, and etc.
    While AIA provides contents and pre-built integration, the SOA visibility and ensuing benefits are among the main value propositions OER offers. To revamp these benefits, users are to license OER.
    On a different note, content publishing to OSR is achieved via OER in the 11g release.

  • Migrate SOA Suite 10.3.3.1 to 11g

    Hello
    Does anyone know if there's documentation available about migrating my current SOA environment to the new 11g environment?
    regards
    Michel

    There was a [good presentation|http://www28.cplan.com/cbo_export/208/PS_S298898_298898_208-1_v1.pdf] at [Open World|http://www.oracle.com/openworld/2008/index.html] (you need an account to access this) that outlines where 11g is going.
    As Marc says, 11g SOA is not here yet. The purpose of TP4 is to let developers play with the new technology before it enters production. It should not be used to develop production SOA applications at this point in time.
    If you need to deliver SOA applications today then use SOA Suite 10.1.3.4.
    Marc raises a good point about migration of in-flight processes, I don't know what the answer is to that. Maybe one of the PMs can enlighten us.
    Antony

  • I had migrated Oracle 10g database from Windows to Oracle 11g Linux

    I had migrated Oracle 10g database from Windows to Oracle 11g Linux.  The database is performing very slow.
    Please guide me where I have to begin (starting point) looking into it.
    Some document stated gather system statistics.  How to check system statistics is up to date
    What are the crucial initialization parameter ?

    Hi,
    Let me just point you out to the documentation, which may concern you:
    I had migrated Oracle 10g database from Windows to Oracle 11g Linux.  The database is performing very slow.
    Managing Optimizer Statistics
    How to check system statistics is up to date
    Managing Optimizer Statistics
    What are the crucial initialization parameter ?
    Configuring a Database for Performance
    Thanks &
    Best Regards,

  • Generating Midway Receive Activity with Service Constructor in AIA 11g

    Hi all,
    We are trying to generate a midway receive activity in ABCS (to handle callback) using service constructor. However when I am using the callback option and selecting a target service it is generating an invoke activity only.However this thing worked with Artifact Generator in AIA 2.5 FP.
    Has anybody achieved this scenario of generating midway receive activity using service constructor?
    Thnks & Rgds,
    Mandrita

    Hi,
    Yes. You give it the abstract WSDL and operation for the callback.
    The service constructor merely provides a starting point and not a complete composite. You have to do a lot of ‘finishing’ off yourself.
    I should point out that we are now through our testing phase of our integration. Although midway receives in our ABCS’ do work they greatly increase the maintenance load on the system, the admins and support staff. If I were to re-work this I would have designed the ABCS’ to be transient and I would highly recommend you look at re-working the solution so that wherever possible every single BPEL you create is truly transient and short lived. (Have a look here http://blog.thisisahmed.com/2009/05/transient-vs-durable-bpel-processes.html)
    Where we had a requirement for a mid-way receive to send the response back to the correct place I would have instead used two one way integrations and program the target system to hold and re-transmit any data required by the return path.
    Robert

  • AIA 11g ABCS compilation error

    We are having issues with our ABCS compilations (trying this on Jdev 11.1.1.2).. The error message is ..
    Error(17,60): Failed to compile bpel generated classes. failure to compile the generated BPEL classes for BPEL process "SyncCustomerPartyListEbizReqABCSImpl" of composite "default/SyncCustomerPartyListEbizReqABCSImpl!1.0" The class path setting is incorrect. Ensure that the class path is set correctly. If this happens on the server side, verify that the custom classes or jars which this BPEL process is depending on are deployed correctly. Also verify that the run time is using the same release/version.
    It’s failing on composite.xml, and the error is at SyncCustomerPartyListEbizReqABCSImpl… We have already deployed the referenced/related artifacts into our Weblogic server. Please help.
    Thanks.

    In JDeveloper have you added aia.jar using Tools -> Preferences -> SOA ?.
    This error usually indicates a problem with embedded Java code. This could be because of missing aia.jar library.

  • Migrating 10g Human Task Bpel process to 11g - No task flow

    Hi All,
    I have migrated a bpel process that has a human task to 11g. I need to stipulate the uri so that it will show on the worklist.
    Apparently there is a file in the WEB-INF folder that i must reference. I went into the folder and there is many xml files(adfc-config.xml,faces-config.xml,trindad-config.xml, web.xml, weblogic.xml) there is no file generated from the migration. Hence how do i go about to get the correct uri and for the worklist to show.
    Below is an incomplete uri
    /workflow/ExceptionHandlerTaskForm//faces/adf.task-flow?_id=ExceptionHandler_WF_1_TaskFlow&_document=WEB-INF/

    failed to get solution

  • Deploying AIA 11g composites in Production Environment

    Hi all,
    I am facing one trouble in deploying AIA11g composites in Production Environment. I know how to deploy codes on a usual server but in case of Production we require a single bundle containing say 100 composites for services developed.
    Scenario:
    Bundle all AIA composites developed into one single deliverable which can be deployed directly.
    Things known or tried:
    1. Deployment Plans will deploy codes to server manually which will mean that our codes have to be present on remote location so as to deploy them.
    questions:
    2. How can we archive MDS data (containing AIA design artifacts) and publish it in MDS.
    3. Composites Such as EBS\Requester ABCS contains concrete urls so how can we make sure that they are overriden once we deploy it on Production Server with that server hostname:port.
    Regards,
    ankit

    For publishing the changes to MDS, follow the steps -
    1) Source the environment by running aiaenv.sh
    2) Update UpdateMetaDataDP.xml at <AIA_INSTANCE_HOME>/config with the entries of the documents to be published.
    Here is an example of entry for AIAConfigurationProperties.xml -
    <fileset dir="AIA_HOME/aia_instances/INSTANCE_NAME/AIAMetaData">
    <include name="config/AIAConfigurationProperties.xml" />
    Make sure to create different fileset dir tag for each entry, else the documents will not be published to MDS.
    3) Access the $AIA_HOME/Infrastructure/Install/config folder.
    4) Execute the following command:
    ant -f UpdateMetaData.xml
    Hope it helps!

Maybe you are looking for

  • Using a variable in communication channel

    Hi, I have a lot of Communication Channels looking for files in the same directory. This directory's path will be changed soon and so I assume I'll have to change all my Communication Channels. I was wondering whether there was a means of using a var

  • GT70 0NC - Unable to flash non-Windows 8 BIOS

    Hello, I recently purchased a GT70 0NC notebook and have been unsuccessful at updating the BIOS. The notebook came pre-installed with Windows 8, but I reformatted with Windows 7 x64. I was able to flash in the EC from the factory 1762EMS1 v5.03 to 17

  • Problem posting photos to facebook from Organizer

    I have always exported photos from Organizer and then posted those .jpg files on Facebook however, this has suddenly stopped working.  I am still exporting the same way to a .jpg file but Facebook now tells me that it can't read the file.  I have con

  • 2 different expresscard/34s with 2 firewire 800 ports are not fully recognized on new macbook pro 17" under lion

    We have 2 expresscard/34s, a Belkin ec1394b2 and a Startech "FireWire 800 ExpressCard". Both are "reported" to suppport OS X but neither does more than show "PCI FireWire 800 ExpressCard" in the available interfaces list in Network Preferences with a

  • Mobile no of contact person in customer master

    Hi. I am entering mobile no of contact person in customer master but I am not able to find where it is stored in database. Actually i got telephone no of contact person in table KNVK. but mobile no is not there. Please tell me. Thanks.