Migrating to office 365/Win 8.1 from Office 2010/Win 7.0 the Outlook Personal folders are missing.

In Office 2010 I had emails archived into private data file personal folders/subfolders under Outlook 2010. My Office 2010 installation was wiped out when I upgraded from Windows 7 to Windows 8.1. The outlook.pst files are still available. When I installed
Office 365 on my Windows 8.1 system, Outlook 365 picked up the .pst and populated the Inbox and Sent folders, but the archived email personal folders are not present, and also the contacts folder is empty. I haven't been able to figure out where on the hard
drive the personal folders were actually archived (in Office 2010 ) or if Office 365 will even support showing these personal folders.

Problem solved. I found a separate .pst file in my backups that contained the personal folders and the contacts. This file wasn't in the Win 8.1 documents\outlook files folder. So two .pst files are needed; one for the emails and the other for the personal
folders.

Similar Messages

  • MS Office 365 fails to install in default on Win 8.1 new laptop S75-A7221

    Hello,
    New license MS Office 365 fails to install in default on Win 8.1 new laptop S75-A7221.
    I downloaded software from Microsoft MS Office 365 site.
    What is the contact for helpdesk in India for quick resolution?
    Thanks,
    Miroslaw

    Run Microsoft FixIt in the following link to check the result.
    http://support.microsoft.com/kb/2822317
    If your Office installation problem continues to occur, try to perform the steps provided by the same link for general troubleshooting.
    Tony Chen
    TechNet Community Support

  • When I share a pages document as a PDF (via e-mail) all the pictures change from the original document, most are missing with just a few of them repeated in the spots where others had been.  How do I do this without the document changing?

    When I share a pages document as a PDF (via e-mail) all the pictures change from the original document, most are missing with just a few of them repeated in the spots where others had been.  How do I do this without the document changing?
    I need to be able to send it to a PC in order to print it.

    Hard to say what is happening without examining the file.
    If you like click on my blue name and email me both the .pages file and the the .pdf you have made from it.
    Peter
    ps It would help to say what version of Pages you are using and on what you are running it. iOS or Mac and what version.

  • When creating PDFs from WORD 2010 I cannot get the TOC heading entries as hyperlinks

    When creating PDFs from WORD 2010 I cannot get the TOC heading entries as hyperlinks. I used to be able to do this in WORD 2003. I tried to create a PDF from Acrobat by selecting File > Create PDF >navigate to the WORD file > select three checkboxes >
    Any help with getting the TOC heading entries as hyperlinks?

    Try to do it from Word using the ribbon.

  • Can I sync my iCloud calendar with Outlook 365?  I upgraded from Office 2010 and now it doesn't sync.

    I upgraded from Outlook 2010, and now it doesn't update in Outlook 365.  Thinking I can't do it, and it's a pity, cause I want it all to integrate on phone and on desktop.  I'm running Windows 7 and Office 365.  The iCloud app works fine with Internet Explorer, but I can't get the calendar to update.  Any suggestions?

    Can't I just set up Exchange as one of my calendars in ical?
    Only if you're running Snow Leopard and your employer will allow access (different than iPhone/mobile device access, so most likely not), but not needed - keep reading.
    Is it really true that I have to choose between syncing Exchange with work server OR syncing iCal with personal Macbook?
    No. It was true, but with the v3.0 software that changed - you can now sync your Exchange contacts and calendar over the air, and your Address Book and iCal via iTunes over the docking cable.
    What is the best work around for this?
    None needed. When you set up the exchange account, and choose to turn on syncing of contacts and calendars, you will be prompted to remove all other data, or keep it on the iPhone. Choose the keep option. Note that in that case, your personal data will not be uploaded to the Exchange server - the iPhone keeps them separate (although you can choose to view them in a merged fashion).
    I have this set up on my phone (Exchange calendar along side personal and other calendars from iCal). Same for contacts. Works great.

  • Need to create new users in Office 365 with custom attributes from a csv file

    I am exporting users from an active directory environment and then deleting them from AD. They are Alumni and will no longer be in AD.
    I have a csv file with the following fields that I need to use to create new Alumni email boxes in Office 365 for. I need the CustomAttributes because my Dynamic Distribution Groups use them. I am fairly new to PowerShell and have been unable to get this
    to work. I suspect I may have to split it into two parts, but am not sure how to proceed. Any assistance would be appreciated. I was directed here from the Office 365 community.
    Import-Csv -Path c:\CSVfiles\CreateAlumni.csv | ForEach-Object {
       New-MsolUser -FirstName $_.FirstName -LastName $_.LastName
       -UserPrincipalName $_.UserPrincipalName
       -DisplayName "$($_.FirstName) $($_.LastName)"
       -Password $_.Password
       -CustomAttribute1 $_.CustomAttribute1
       -CustomAttribute3 $_.CustomAttribute3
       -CustomAttribute10 $_.CustomAttribute10
       -CustomAttribute11 $_.CustomAttribute11
       -CustomAttribute12 $_.CustomAttribute12
       -LicenseAssignment 'domaincom:EXCHANGESTANDARD_ALUMNI'
       -UsageLocation US

    Ok, it wasn't stopping after 2 iterations. What I was seeing was 2 failures. The first was the Get-Mailbox command and the second was when it tried to assign attributes. For some reason it is not looping when it fails. It just goes on and tries to assign
    the Custom Attributes. I added writes in to tell me what was happening.
    ### Check if mailbox is provisioned yet
    Write-Host "Checking if mailbox is provisioned yet..." -foregroundcolor yellow
    $found = $false
    $count = 0
    Do {
    try {
    Get-Mailbox -Identity $_.UserName -ErrorAction Stop
    $found = $true
    Write-Output 'Mailbox found. Details:'
    Get-Mailbox -Identity $_.UserName
    } catch {
    Write-Output 'Sleeping'
    $count++
    Start-Sleep -Seconds 5
    If ($count -ge 12) {
    Write-Output 'Mailbox not found. Quitting.'
    $found = $true
    } Until ($found)
    Write-Host "Adding Custom Attributes to User" -foregroundcolor yellow
    Set-Mailbox -Identity $_.UserName -CustomAttribute1 $_.CustomAttribute1 -CustomAttribute3 $_.CustomAttribute3 -CustomAttribute10 $_.CustomAttribute10 -CustomAttribute11 $_.CustomAttribute11 -CustomAttribute12 $_.CustomAttribute12
    Write-Output "User has been Provisioned in Office 365!" -foregroundcolor yellow
    Checking if mailbox is provisioned yet...
    The operation couldn't be performed because object 'Joe.Cool2003' couldn't be found on 'CO1PR07A002DC01.NAMPR07A002.prod.outlook.com'.
        + CategoryInfo         
    : NotSpecified: (:) [Get-Mailbox], ManagementObjectNotFoundException
        + FullyQualifiedErrorId : [Server=CO1PR07MB125,RequestId=e1aabda1-01e4-4f68-984e-e20be0975242,TimeStamp=5/22/2014 4:23:59 AM] [FailureCategory=Cmdlet-ManagementObj
       ectNotFoundException] 2788FB48,Microsoft.Exchange.Management.RecipientTasks.GetMailbox
        + PSComputerName        : pod51038psh.outlook.com
    Mailbox found. Details:
    The operation couldn't be performed because object 'Joe.Cool2003' couldn't be found on 'CO1PR07A002DC01.NAMPR07A002.prod.outlook.com'.
        + CategoryInfo         
    : NotSpecified: (:) [Get-Mailbox], ManagementObjectNotFoundException
        + FullyQualifiedErrorId : [Server=CO1PR07MB125,RequestId=16a8a2bc-333a-455c-8504-e0b99c44c334,TimeStamp=5/22/2014 4:24:00 AM] [FailureCategory=Cmdlet-ManagementObj
       ectNotFoundException] 2788FB48,Microsoft.Exchange.Management.RecipientTasks.GetMailbox
        + PSComputerName       
    : pod51038psh.outlook.com
    Adding Custom Attributes to User
    The operation couldn't be performed because object 'Joe.Cool2003' couldn't be found on 'CO1PR07A002DC01.NAMPR07A002.prod.outlook.com'.
        + CategoryInfo         
    : NotSpecified: (:) [Set-Mailbox], ManagementObjectNotFoundException
        + FullyQualifiedErrorId : [Server=CO1PR07MB125,RequestId=8319d220-b9dd-492f-8182-5083cf56e58b,TimeStamp=5/22/2014 4:24:00 AM] [FailureCategory=Cmdlet-ManagementObj
       ectNotFoundException] C7844A24,Microsoft.Exchange.Management.RecipientTasks.SetMailbox
        + PSComputerName       
    : pod51038psh.outlook.com
    User has been Provisioned in Office 365!
    Of course the user has been provisioned, but the CustomAttributes have not been assigned. :(

  • Office 365 Pro Plus - updates from the internet

    Hi All
    I've used the Office deployment toolkit to download Office 365 Pro Plus to a local file server, and have now packaged this up within SCCM 2012 for deployment to clients.
    In my configuration.xml file i have the following set for updates
      <Updates Enabled="TRUE" />
    I understand that this setting allows for updates, and client will download them from the internet.
    Is this correct?
    I am concerned that the Office 365 source files i downloaded are a few months old now, so will be out of date and i am relying very much on my deployed clients to be downloading updates as expected.  Do i need to do anything else?
    Thanks

    <Updates Enabled="TRUE" />
    I understand that this setting allows for updates, and client will download them from the internet.
    Is this correct?
    That's correct, with Updates element configured as "TRUE", the Click-to-Run update system will check for updates from the CDN server automatically. So with this configuration, you will always be up-to-date:
    http://technet.microsoft.com/en-us/library/jj219426.aspx#BKMK_UpdatesElement
    Deploying with an old build should be no problem here, but why not re-download a newer build with ODT (Office Deployment Tool). That should not take too much time and will definitely reduce the network bandwidth consumption when Office 365 updates itself
    from each client after the deployment...
    Regards,
    Ethan Hua
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Can't activate Office 2011 for mac (downloaded from office 365 portal)

    Hello All,
    I've installed Office 2011 for mac which was downloaded from office 365 Portal. However, during installation process there was not a windows for activation (key or sign in method).
    Is there a way to force activation on Office 2011 for mac?
    Note: I've deleted office 365 com.microsoft.office.plist but i didn't get a windows for activation.
    MacbookPro Version 10.10.2
    Regards
    JO

    Hi,
    If you downloaded Office 2011 for Mac, you may not need a product key to activate it. Office 365 uses a new mechanism that the activation is based on your Office 365 Account instead of a product key.
    Anyway, in this forum we mainly discuss questions and feedbacks about Office for Windows, as your question is about Office for Mac, I suggest you post the question in Office for Mac forum:
    http://answers.microsoft.com/en-us/mac
    I've also noticed this question is actually more related to the activation, you may need to contact the local customer service to get more dedicated assistance:
    https://support.microsoft.com/gp/customer-service-phone-numbers/en-us?wa=wsignin1.0
    Regards,
    Melon Chen
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here

  • Do I need to purchase Office 365 A3 plan for faculty to get free Office 365 ProPlus for students in Office 365?

    Hi there
    Our school has A2 plan for both students and faculty. We recently contacted our reseller and placed an order for free  Office 365 ProPlus A for our students. We received an acknowledgement from Microsoft regarding this order saying that it was successfull
    and I can see the license added when I log into the VLSC website. Problem is, I can't see this licence listed when I log into Office 365 admin. It is not listed under subscriptions or licenses. Apologize for my ignorance, but I don't know how can I get this
    license added in Office 365 so that our students can start using editable versions of office apps on their IPADs. Do we need to purchase Office 365 A3 plan for our staff to get this student's license enabled in Office 365? Can somebody please help?

    I have similar questions concerning getting started with the Student Advantage program offering.
    I've read the blog posts and made as many as 5 calls to Office 365 and still do not understand how to get this going.
    We have a subscription to Education A2 for both faculty and students that we started in January 2014.  We receive this at no charge.  So I'm starting with a subscription at no cost.  I do not have an Education Reseller because we started our
    subscription through the website with a trial and had that converted to the no cost A2 plan.
    When I am in the portal and look under 'Purchase Services' I can see the option to add Office ProPlus for Faculty at $2.00/user/month and for Office ProPlus for Students at $1.50/user/month.  My understanding of Student Advantage is that if I license
    all my faculty/staff accounts for Office ProPlus I would then get the Student access at no charge.  So I've licensed the Office ProPlus for Faculty for all of our faculty accounts yet I cannot get a clear answer about how to get the Student accounts added
    at no cost.
    I most recently was told by Office 365 support that I needed to speak to a reseller, which I did today.  He told me that I would need to do one of two things.
    1. Upgrade my no cost A2 faculty accounts to A3.  Which for me and what I see in the portal would take them from $0 to $4.50/user/month.  With that A3 for faculty I would get the Office ProPlus for the Students accounts on A2 at no charge.  
    2. I would need an Open Value license covering all school FTEs for Office at a cost of about $29/user/year.
    Both of these options are higher than licensing all Faculty accounts for Office ProPlus via the portal at $2/user/month which I have already done.
    So I don't understand why that doesn't qualify us for Student Advantage and now have to license all FTE, most of whom don't even touch a computer, for Office.

  • Office 365 Reseller - Provision of new Office 365 business using API's?

    Hi,
    I couldn't work out which category to put this into. We have built our own provisioning and billing portal which is currently used to provision phone services. We currently resell hosted exchange and are looking to resell Office 365. Are there any API's
    available for Office 365 for the creation, management, deletion of businesses and users within that business. We want all of the functionality of the office 365 partner and admin portal but we want all tasks to be completed within our own provisioning portal
    using API calls to the office 365 admin tools?
    For example, you can purchase office 365 from the godaddy website, we want to be able to do that.
    Thanks.

    Hi,
    Could anyone advise on this matter ?
    Thanks,
    Kind regards.

  • Office jet x64 not printers from office

    HP OfficeJet Pro 8620
    Cannot print from Office applications (Word, Mail).
    PDF (Foxit) and Notepad print just fine.
    Tries this on Win7 Home 64bit with Office 2010, and Win8.1 64 bit with Office 2013.
    Both laptops have the same issue: printing and scanning work just fine, both wireless and usb, except when printing a document from Word or an email from Outlook.
    Tried installing all software, first from CD, update using the HP Doctor, checked Event Viewer (no logentries whatsoever).
    Please help!
    is it a 64bit Office issue? or a printer-transport thingy?
    I've read one post about changing the administrator profile, but I don't see how...?

    Wow.. we are looking for you.  This is a new issue which caused by the the temp/tmp folder doesn't have access or change to common folder
    First, let us fix your issue.
    Download the hotfilx Win7 hotfix  from microsoft and install it
    http://support2.microsoft.com/hotfix/KBHotfix.aspx?kbnum=2762808&amp;kbln=en-US
    You need to restart after installing the hotfix.
    For our records,
    1. We need your help to get the Office version number, (32 bit/ 64 bit) 
    2. Did you recently upgrade from Win 7 to Win 8?
    3. How many user accounts you have in your computer and their profies info.. admin privilates or standard user profile?
    Any other information you remember you did recently on this computer.
    Thanks,
    Praba
    Click on the "Thumbs up"button on the left to say "Thanks"
    Please mark the post that solves your problem as "Accepted Solution"
    (Although I am employed by HP, I am speaking for myself and not for HP)

  • Office 365 E3 subscription / Terminal Server / Office Professional Plus 2013

    Hi,
    Background info:
    We use multiple Office 365 E3 subscriptions (12 now) and also have an Windows Server 2008 R2 Terminal Server.
    The users may install Office 365 Pro Plus on their local machines and are able to connect to SharePoint online with the Office applications. Now not everyone has a PC so they log in to one of the two Windows Server 2008 R2 Terminal Servers. I do
    however want one big happy family working with SharePoint so I installed Office Professional Plus 2013 and tweaked the Group Policies so that the start up screen and movie arent beeing showed.
    When I log in with my test user on the Terminal Server (who has a E3 subscription) I miss the feature to add a location (to connect to the SharePoint site). I just do not have that feature. When I log in with my domain administrator account who also
    has an E3 subscription, I am able to add a connection.
    There is SO much info on the web about Office 365/Terminal Servers etc but I am not able to find what I was looking for.
    Question:
    What do I need to do so our Domain Users who log in to the Windows Server 2008 R2 Terminal Server are able to open/save files directly to the SharePoint site? How do I add the SharePoint location?

    Wrong forum :)
    You should either go to the Terminal Services (RDP) forum or Office 365.
    Good luck with your issue.

  • Editing Office 365 Excel Doc in Excel Office 2013

    I have an excel document with macros uploading on Office 365. I understand that I can't use the macros in excel online so I want to edit in excel. When I click 'Edit in Excel' the program opens but the actual document doesn't. I am able to download a copy
    though. How do I get the document to open?
    Thanks

    Hi,
    Does this only occur to this specific Excel file? or all Excel files?
    Let's first test with a simple Excel file without macros, or disable the macros in that specific file, upload it to Cloud, then try again. This will help to narrow down whether the issue is with the macros.
    Please feel free to post back with any findings.
    Regards,
    Ethan Hua
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Migrated from old Windows XP laptop to new Windows 8 laptop. Bookmarks, passwords, personalized settings are missing?

    We purchased a new Windows 8 laptop. I used Windows Easy Transfer to transfer data from the old laptop to the new laptop. Now, my wife's bookmarks, saved passwords, and other personalized settings do not appear on the new laptop.
    I am not sure if Windows Easy Transfer actually migrated my wife's Firefox profile. Where would this be stored on the new laptop?
    How can I manually migrate her profile from the old computer to the new computer?

    I do not know anything about Windows 8 but if you have Firefox installed and running there is an easy method of finding your profile: let Firefox do it for you by using the troubleshooting option as explained in this article
    * [[Profiles - Where Firefox stores your bookmarks, passwords and other user data]]
    ** also see [[Back up and restore information in Firefox profiles]]
    I would imagine your wife's profile should be in a similar location to your own but under another user's name.
    To manually migrate the profile just overwrite the existing default profile of your wife in Windows 8 with the full profile folder and files from the XP. For full details on how to do this and further background information please look at:
    * http://kb.mozillazine.org/Moving_your_profile_folder#Create_a_new_profile_and_migrate_your_old_data
    Although I am unable to give you a direct answer to your question I hope the above articles will help, post back with how you get on.

  • Afte mirgation from SP 2010 to 2013, change the search box image size in sharepoint 2013

    Hi,
    After migration from 2010 to 2013, the search box image size increased. Pls check the screenhot below,
    I
    i need to resize this searc image.
    Any help is much appreciated.
    Thanks
    Smile Always

    I assume you have made some changes to this out of box search 
    you will have to take help from a CSS expert to select the div of this image and resize it. it has to be updated in css file on the server
    You can use developer(f12) tool in IE to test that 

Maybe you are looking for

  • Will Apple fix an iPhone 3G that used to be jailbroken but no longer is?

    My iPhone used to be jailbroken but then i restored it to factory settings because I realized it made Apple mad and stuff. Then the iPhone thought the headphones are always plugged in. I called technical support and they gave me a genius appointment

  • How to call Weblogic Portal 8.1 Datasync programmatically ?

    Hi, I've a cluster domain with a adminServer and cluster1(managed1 and managed2). The web application datasync works fine on the adminServer, bootstraping and merging from a jar file and propagating the updated data items to the managedServers. But I

  • BADI / EXIT or SUBSTITUTION for F-28 or F-32

    Hello All, Can someone help me, please? I have to save the doc number when the transaction F-28 or F-32 is saving the document. I found some BADI's and Exit's, but anyone can't solve my problem... I've put a break-point in wich one, and only one BADI

  • Facetime Camera not working - Installed 10.8.5 Supplemental Update

    So I cheerfully installed the supplemental update for Mountain Lion 10.8.5 tonight and it did not fix my camera issue with Skype. In fact, my Facetime camera, which was working fine with Facetime & Photobooth, stopped working with any software after

  • Changes in SO

    Hello Experts, I want to track all the changes made in SO,i can able to find Environment - Changes. But my requirement is tat System provides "Revision Number" to track changes to confirmed Sales Order. So i couldnt find the revision nos . Plz Sugges