Migration from HP-UX to Linux DB for UPK3.5

Hi all
I have a customer who wants to migrate the UPK server from one server to other also the repository database used by the UPK server.
Old UPK server details
UPK server platform:Windows 2003 SP2
UPK version:3.5
Database platform:HP-UX
DB Version:10.2.0.4
New UPK server details
UPK server platform:Windows 2003 SP2
UPK version:3.5
Database platform:Linux
Version:10.2.0.3
Can you please advise the procedure that needs to be followed and the document id if any?
Thank you in advance and best regards,
Dan

As stated several times before, this is not the forum for UPK questions. Please look at top of the thread list for information on how to reach the UPK forum.

Similar Messages

Migration from HP-UX to Linux 64 bit on SAP XI 3.0 environment

Hi All,
Can you please provide the requirements steps/documents for migration from HP-UX to Linux 64 bit on SAP XI 3.0 environment
Thanks
Sateesh

Hi Sateesh,
This migration which you refer here is a heterogenous system copy. you may refer the system copy guide for the same.
you can get the system copy guide from the below link
Database and Operating Systems - System Copy [original link is broken]
Also refer the SMP link
http://service.sap.com/osdbmigration
The migration should only be performed by SAP certified OS/DB migration consultant.
Regards,
Chandru

4.6C migration from HP-UX to Linux

Hi all,
we are planning to move the current 4.6C environment from HP-UX to Linux platform. we need help with a couple of things that are posted below.
1. Is 4.6c compatible on RH Linux 11.31.
2. Do we need a seperate liscense for Linux or can we use the existing one.
3. Can we install a fresh installation of 4.6C on linux and import the DB from teh present working environment. Is this the way it is done.
4. Can we upgrade the DB from Oracle 9.2 to 10.4 due the migration process.
Your hellp will be appreciated.

Dear
1. Is 4.6c compatible on RH Linux 11.31.
2. Do we need a seperate liscense for Linux or can we use the existing one.
3. Can we install a fresh installation of 4.6C on linux and import the DB from teh present working environment. Is this the way it is done.
4. Can we upgrade the DB from Oracle 9.2 to 10.4 due the migration process.
1. There is no Red Hat 11.31, only HP-UX 11.31 and Red Hat Enterprise Linux 5 (or 4).
2. After migration, you hardware key changed, you need to renew your license. You do not need a separate one
3. for OS/DB Migration, check: http://service.sap.com/osdbmigration
4. There is no Oracle 10.4, only 10.2.0.4 ! If you want to use Oracle 10.2.0.4 you'd need the 46C_EX2 kernel
You should also take care, that native installation for 46c is 32bit only (for Linux). However, we have a prepared 46c installation CD for 64bit installations on linuxx86_64 (with kernel 46c_EXT -> later upgrade to 46c_EX2). You can request this CD via an OSS call on BC-OP-LNX-X64.
Hannes

OS/DB migration from IBM zOS to IBM AIX for R/3 Enterprise 4.7 x 100

An OS/DB migration is required from zOS to AIX for R/3 Enterprise 4.7 x 100.
By default, R/3 4.71 is using kernel 6.2. But SAP stops the maintenance for kernel 6.20 and kernel 6.40 (or 6.40_ext, or 6.40_ex2) is recommended.
My question is which CD (include 6.20 kernel) will be used for export and import?
Under https://service.sap.com/swdc --> Installations and Upgrades --> My Company's Application Components" SAP R/3 ENTERPRISE" SAP R/3 ENTERPRISE 47X110 --> Installation --> OS , I can find:
CD R3E 4.70 SR1 (U) SAPINST DB2 UNIX/NT
CD R3E 4.70 SR1 (U) Kernel DB2/UDB A,L,N
and I believe they are 6.20 version. There is no 6.40 kernel there.
Note 664679 (Installing 6.40 kernel in SAP WEB AS 6.10/6.20) describes a way to upgrade the kernel to 6.40. It does not apply to a fresh installation.
Migration requies the latest R3LDCTL, R3SZCHK, R3load for both export and import.
Under https://service.sap.com/swdc -->Support Packages and Patches --> My Company's Application Components" --> SAP R/3 ENTERPRISE --> " SAP R/3 ENTERPRISE 47X110" --> Entry by Component" --> SAP R/3 Enterprise Server, we can find:
SAP KERNEL 6.20 32-BIT (no longer in maintenance)
SAP KERNEL 6.20 32-BIT UNICODE (no longer in maintenance)
SAP KERNEL 6.20 64-BIT (no longer in maintenance)
SAP KERNEL 6.20 64-BIT UNICODE (no longer in maintenance)
SAP KERNEL 6.40 32-BIT
SAP KERNEL 6.40 32-BIT UNICODE
SAP KERNEL 6.40 64-BIT
SAP KERNEL 6.40 64-BIT UNICODE
SAP KERNEL 6.40_EX2 32-BIT
SAP KERNEL 6.40_EX2 32-BIT UC
SAP KERNEL 6.40_EX2 64-BIT
SAP KERNEL 6.40_EX2 64-BIT UC
The version of R3LDCTL, R3SZCHK, R3load under kernel 6.20 is quite old. So I think 6.40 is recommend to work with those migration tools.
Per note 971646, there is an DVD (Material Number 51033746) "6.20/6.40 based products Installation Master (Edition May 2008)" but it only apply to Enterprise 4.7 x 200, not Enterprise 4.7 x 100.
So who can clarify which CD I can use for this migation?
Thanks,
James

This sounds like a kernel update for the installation tool.
I think there should be a chance to abort the export/import/inatllation of 620, then we replace the kernel (SAPEXE.SAR, SAPEXEDB.SAR, R3load tools etc) with 640 version and then continue the export/import/installation. Am I right?
Thanks again
James
Edited by: Ma Fuzhong on Nov 6, 2010 9:54 AM

Migration from HP UX to Linux

HI All,
We are just migrating OS from HP UX to Linux .But we are not touching database.In ABAP System there is no instance ID.So after migration all the application need not to be reinstalled.But in java there is unique instance id registered with java CI .So we need to again install application .Otherwise application server don't get synchronized .Is there any other way so that after migration also all applications are synchronized.We need not to manually reinstall .
Regards,
Abhishek

Abhishek,
Go thorugh SAP Note 966752 - Java system copy problems with the Java Migration Toolkit
You will get some clue , plan accordingly , In my view manual action will be required
Regards,

Issue while migrating from File to DB based repository for SAP adapter

Hi
I recently migrated from file based repository to DB based repository.
SAP Adapter: DB repository for JCA configuration
After that I created the new targets and the jca log file showed me correct entry saying that it read from DB repository.
Thread[Thread-6,6,main] [info ] Repository URL 'jdbc:oracle:thin:@db_host:1521/fmwdbqa' resolved to repositoty type: oracle
But when I restarted the weblogic server I observed that it is again reading from the file repository.
Thread[[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)',5,Pooled Threads] [info ] Repository URL 'file:///opt/apps/Oracle/Middleware/Oracle_SOA1/soa/thirdparty/ApplicationAdapters/config/XYZ/repository.xml' resolved to repositoty type: file
Any reason why this is happening? Any other setting required to avoid this?
Regards
Subhankar

Hi Manoj
I checked the web.xml under MW_HOME/Oracle_SOA1/soa/thirdparty/ApplicationAdapters/iwafjca.war/WEB-INF folder. The iway.jndi is set to below :
<param-name>iway.jndi</param-name>
<param-value>eis/OracleJCAAdapter/DefaultConnection</param-value>
I checked the outbound connection settings from Admin console under below path
Home >Summary of Deployments >iwafjca > configuration
I can see that the properties IWayRepoURL, IWayRepoUser and IWayRepoPassword are set to blank here. Where exactly are these property values picked from ? Or do I need to manually edit it here in admin console itself?
Regards
Subhankar

Migrating from MCS7845 to UCS C210M2 Server for CUCM8.0

Customer Alpha has CUCM and Nortel.
(I.) Following is the CUCM Cluster breakup:
   - Location X: PUB, SUB1, SUB2
   - Location Y: SUB3
   - Location Z: SUB4, SUB5
(II.) Location Z, Block-A has 10,000 users on Nortel which need to be moved to CUCM8.0 for which the following two new SUBSCRIBER's added to the existing CUCM Cluster:
    - SUB6, SUB7
    - SUB6 & SUB7 will be installed on a UCS C210M2 server
    - Customer will be shipped with two UCS C210M2 with dual quad core 5640 processor
2.In Location Z, currently SUB4 and SUB5 are on MCS 7845 server.
Need to Migrate SUB4 and SUB5 on UCS C210M2 Server from MCS7845.
This way, Location Z with SUBSCRIBERS(SUB4, SUB5, SUB6 and SUB7) will migrate to UCS C210M2 server platform.
Rest of the locations namely- LocationsX & LocationY will continue running on MCS7845 platform.
Need to understand the Migration strategy (point wise) keeping in mind, the PUB is in LocationX still on MCS and only the SUB- SUB4, SUB5, SUB6 and SUB7 will be on UCS platform in locationZ.
Please share the steps required to perform this type of Migration.
Thanks & Regards
Sumit

Hi Gajanan,
Thanks for your prompt reply.
SUB4 Migration from MCS7845 to UCS C210M2 server involves the following steps:
Take SUB4 out of the Network.
Install SUB4 on UCS C210-M2 server, just as a fresh install and ensure the same SUB4 name is assigned on UCS what its there on the MCS7845 platform.
While installation of SUB4, it ask for PUB details like IP Address, assign the reqd. details.
Migrate the users assigned to SUB4 with SUB5 for the time being, this step should have been performed in the beginning.
Once the installation is complete, you can re-install the users from SUB5 to SUB4.
Database replication will take place from PUB
Please confirm if Step4 is required or when we take the Backup using DRS of SUB4 and after the installation of SUB4 on UCS C210, restore the backup on SUB4 and then it would populate the users/phones that were tregistered with SUB4 on MCS 7845 platform on to UCS C210M2 platform.
Do we need to take DRS of the PUB or SUB4?
Can you please put the steps in the correct order.....
Follow the same steps fro SUB5 Migration from MCS7845 to UCS C210M2 server platform.
Thanks & Regards
Sumit

APEX Database migration from HP-UX to Linux

Hi,
we are migrating database from oracle 10.2.0.3 on HP-UX to 10.2.0.4 on Linux. We have Apex 3.1.2.00.02 installed in 10.2.0.3.
Could anyone please provide me any checklist or relevant documentations to migrate database which contains APEX. we are planning to use export/imp
Please help.
Thanks,
Krish

First thing I would do is export all of your applications just to be safe. If you're doing a full database export / import, I believe it will work. If you're going schema by schema, it will not.
The cleanest way is to do a fresh install in your new database...
Tyler Muth
http://tylermuth.wordpress.com
"Applied Oracle Security: Developing Secure Database and Middleware Environments": http://sn.im/aos.book

Migration from HP-UX to Linux on Oracle DB: From 9.2 to 10.2

Consultation, (SAP R3 4.6 Ext)
If I make an export of oracle 9.2 on HP platform, I can make an import to oracle 10.2 on Linux platform?
Someone could make a similar migration?
Regards.

> If I make an export of oracle 9.2 on HP platform, I can make an import to oracle 10.2 on Linux platform?
Yes - you can. Technically the exports are platform and database independent.
Keep in mind that for a production migration you need to have a certified migration consultant on-site, otherwise you will loose support for the target system (http://service.sap.com/osdbmigration).
Also keep in mind that HP-UX is big endian and the target platform is little endian - so if you exchange binary data with other/external systems they need to be made aware of this.
Markus

Database migration from Windows 10g to Linux 11g

Hello All,
We are having a small database in a windows 2003 server machine. We would be shift this database to another Linux platform. So far My action plan is as follows:-
1. Shutting down instance.
2. copying physical structure of Database
3. alter database backup control file to trace as '....sql';
4. Transfer all the files.
5. In the Linux server creating pfile and creating control file using following commad:-
CREATE CONTROLFILE REUSE DATABASE "DBNAME" NORESETLOGS NOARCHIVELOG
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
MAXINSTANCES 8
MAXLOGHISTORY
LOGFILE GROUP 1 '../REDO01.LOG' SIZE 50M,
GROUP 2 '../REDO02.LOG' SIZE 50M,
GROUP 3 '../REDO03.LOG' SIZE 50M
DATAFILE '../SYSTEM01.DBF',
'../UNDOTBS01.DBF',
'../SYSAUX01.DBF',
'../USERS01.DBF',
'../RMANTBS01.DBF'
CHARACTER SET WE8MSWIN1252
6. Opening the database in upgrade mode. I am getting error:
Database mounted.
ORA-01113: file 1 needs media recovery
ORA-01110: data file 1: '/u01/COLDBACKUP_T1RMAN_POC/SYSTEM01.DBF'
Please help
-Reards,
Saha

j_DBA_saha wrote:
Hello All,
We are having a small database in a windows 2003 server machine. We would be shift this database to another Linux platform. So far My action plan is as follows:-
1. Shutting down instance.
2. copying physical structure of Database
3. alter database backup control file to trace as '....sql';
4. Transfer all the files.
5. In the Linux server creating pfile and creating control file using following commad:-
CREATE CONTROLFILE REUSE DATABASE "DBNAME" NORESETLOGS NOARCHIVELOG
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
MAXINSTANCES 8
MAXLOGHISTORY
LOGFILE GROUP 1 '../REDO01.LOG' SIZE 50M,
GROUP 2 '../REDO02.LOG' SIZE 50M,
GROUP 3 '../REDO03.LOG' SIZE 50M
DATAFILE '../SYSTEM01.DBF',
'../UNDOTBS01.DBF',
'../SYSAUX01.DBF',
'../USERS01.DBF',
'../RMANTBS01.DBF'
CHARACTER SET WE8MSWIN1252
6. Opening the database in upgrade mode. I am getting error:
Database mounted.
ORA-01113: file 1 needs media recovery
ORA-01110: data file 1: '/u01/COLDBACKUP_T1RMAN_POC/SYSTEM01.DBF'
Please help
-Reards,
SahaThis will not work ....
Since you are performing the cross-platform migration . So this method will not work . Either use the exp/imp or datapump or the transport tablespace . for more about the transport tablespace check the below link
http://neeraj-dba.blogspot.in/2012/01/cross-platform-transportable.html
Hope this may help you
--neeraj

SAP Oracle database 11.2 migrating from Solaris to RedHat Linux (x86_64)

What is SAP guidance on database migration ? What is the best approach ?
I heard person who does migration has to be certified by SAP.

Jun He wrote:
Thank you for prompt response. When you say "heterogenous system copy" does not support it, do you mean SAP does not support the converted system or just the process itself ?
>
> Actually I am discussing with SAP about generating a system copy to send over to SAP and they said that Data Pump is an option they can accept. If Datapump is accepted by SAP internally, I would think after migration SAP should support datapump-migrated system.
Hi Jun,
I didn't said that SAP will not support your system, after the migration by Oracle data pump. I noted that OS/DB migration is performed by heterogenous system copy with the migration key.
Under this circumstance, if they accept to support you during the migration process with data pump, there's no problem. As I noted that previously, technically it is possible to migrate the system by using data pump, but I didn't requested that kind of support to SAP. I've been surprized to hear that they will support migration with Oracle data pump method. This is my own assestment.
Will they support you, if you face with a problem during the migration with data pump? Or some other problems you may be face after you go to productive, because of this migration?
>> When you say "heterogenous system copy" does not support it, do you mean SAP does not support the converted system or just the process itself ?
I mean that SAP does not support just process itself and the problem you face because of this migration.
Best regards,
Orkun Gedik
Edited by: Orkun Gedik on Jun 29, 2011 11:11 PM

OS Migration from AIX to SUSE Linux

Hi All,
We are having a scenario in which we want to change our OS.
First we have AIX with oracle 10.2.0.4 and SAP ECC 6.00 which we want to change into new hardware with SUSE Linux with same Oracle and ECC 6.00
So we are planning to do Oracle Offline backup restore in the linux system, but in some placed i found If not homogeneous it will not work..
Please let us know the best way.
Thanks & Regards,
Balaji.S

Dear Balaji,
you also need a certified migration consultant, see [https://service.sap.com/osdbmigration|https://service.sap.com/osdbmigration]
Thanks,
Hannes

HT4796 AutoCorrect List (migrate from PC-based Word to Word for Mac)

My transcription work, the production of which relies on extensive use of MS Word's AutoCorrect feature. I am currently using a PC.
I seek to migrate to a Mac, only if I may easily (import) use the same AutoCorrect List database, obviously without re-entering data.
Thank you for reading and if you're moved to reply.
AK

Try posting your question here:
https://discussions.apple.com/community/itunes/itunes_for_windows
Regards,
Colin R.

Migration of Oracle Apps from HP-UX to Linux

Hi Experts,
We have plan to migrate the Oracle Application from HP-UX to Linux OS. Can you please suggest me the road map to be followed :
requirement :
Source : 11.5.10.2 + 10.2.0.4 (DB) : HP-UX
Target need to be : 11.5.10.2 + 11.2.0.2 (DB ) RHEL 64-Bit
Would be grateful , if you suggest the road-map. And suggest if the DB upgrade to be done in the beginning or after the migration.
And also , please provide the note ids to be followed for each activity.

Hi,
At high-end you will have to break up your work into 02 level:
1. Perform a platform migration from HP-UX to Linux
2. Upgrade the Database to 11.2.0.3 from 10.2.0.4
Note: I was aware your target database was 11.2.0.2, but since the latest update is 11.2.0.3 I recommend you do the same.
1. Perform a platform migration from HP-UX to Linux
HP and Linux share a different endian format, therefore you will have to proceed migrating your database via and export/import (you may not be able to use Transportable tablespace).
Please refer following:
https://blogs.oracle.com/stevenChan/entry/migrating_ebusiness_suite_databases_between_platfo
Notes:
Migrating to Linux with Oracle Applications Release 11i (Doc ID 238276.1)
10g Export/Import Process for Oracle Applications Release 11i [ID 331221.1]
10g Release 2 Export/Import Process for Oracle Applications Release 11i [ID 362205.1]
2. Upgrade the Database to 11.2.0.3 from 10.2.0.4
Please refer notes:
Interoperability Notes Oracle EBS 11i with Oracle Database 11gR2 (11.2.0) (Doc ID 881505.1)
Interoperability Notes EBS 11i with RDBMS 12cR1 (Doc ID 1524399.1)
Note: 12c is also certified now with 11i, FYI.
Thanks &
Best Regards

Migration from windows to Linux -- Autoconfig Error

Hi DBA's
I am doing Migration from Windows 2000 to Linux 4.0ES Migration.
Application - 11.5.10.2, Database - 9.2.0.6.
Documents Followed
230627.1 - Export/Import Process for Oracle Applications Release 11i Database Instances Using Oracle9i Enterprise Edition
238276.1 - Migrating to Linux with Oracle Applications Release 11i
Till now i have finished as follows.
1) Doc -238276.1
Section 1 completed on the source instance.
2) Doc -230627.1
Section 1, Section 2, Section 3 completed.
3) Now i started 238276.1
Section 2.
Step 1- updated the manifest --- Completed
Step 2- copy appl_top and Common_top -- Completed
Step 3- Clone the AutoConfig XML context file on the Target System -- Completed.
Step 4- Install iAS Oracle Home -- Completed.
Step 5- Apply the Oracle interoperability patches for Red Hat Enterprise Linux -- Ignored
Note- Because My Application is 11.5.10.2.
Step 6- Run AutoConfig setup phase on the Target System -- Error out.
I run the command as follows.
# cd <AD_TOP>/bin
# ./adconfig.sh run=INSTE8_SETUP contextfile=<Target System ctxfile>
[applmgr@aqherp bin]$ ./adconfig.sh run=INSTE8_SETUP contextfile=/s03/oracle/prodappl/admin/PROD_aqherp.xml
Enter the APPS user password: Script execution phase specified: INSTE8_SETUP
The log file for this session is located at: /s03/oracle/prodappl/admin/PROD_aqherp/log/01122007/adconfig.log
AutoConfig is configuring the Applications environment...
AutoConfig will consider the custom templates if present.
Using APPL_TOP location : /s03/oracle/prodappl
ERROR: Unable to set CLASSPATH
Neither of the following are present
/usr/jre/lib/rt.jar
/usr/lib/rt.jarERROR: Unable to set CLASSPATH
Neither of the following are present
/usr/jre/lib/rt.jar
/usr/lib/rt.jar Classpath :
Version Conflicts among development maintained and customized templates encountered; aborting AutoConfig run.
The logfile for this session is located at: /s03/oracle/prodappl/admin/PROD_aqherp/log/01122007/adconfig.log
[applmgr@aqherp bin]$
==========================LOG FILE SHOWS=================================================
Starting AutoConfig at Mon Jan 12 20:07:21 2009
Using adconfig.pl version 115.81
Script execution phase specified: INSTE8_SETUP
Classpath :
Version Conflicts among development maintained and customized templates encountered; aborting AutoConfig run.
Please help me to resolve this issue.
Best Regards,
Suresh Gelda

Hi DBA's
I am able to run the autoconfig now, but i am getting errors in that
Please check log file which i am pasting here
Checking version of /s03/oracle/prodcomn/java/jdbc14.zip
File exists
RC-50208: Exception in method TimedProcessProcess.run
Raised by oracle.apps.ad.util.TimedProcess$TimedProcessProcess: java.io.IOException: Cannot run program "/s03/oracle/prodappl/ad/11.5.0/bin/adident": java.io.IOException: error=2, No such file or directory
File Version: -1
File version could not be obtained
Skipping updating s_fnd_jdbc_stmt_cache_size.
Updated s_fnd_jdbc_stmt_cache_size to 0
Configuring MOVEJSPPAGEREPOS settings ...
Execute SYSTEM command : mv /s03/oracle/prodcomn/html/_pages /s03/oracle/prodcomn
/s03/oracle/prodcomn/html/_pages is moved to /s03/oracle/prodcomn/_pages successfully
ERRORCODE = 1 ERRORCODE_END
.end std out.
*******FATAL ERROR*******
PROGRAM : (/s03/oracle/prodappl/fnd/11.5.0/patch/115/bin/txkSetConfig.pl)
TIME : Tue Jan 13 12:23:09 2009
FUNCTION: [ Level 1 ]
ERRORMSG: ERROR: Reading /tmp//orainst/unix.rgs: No such file or directory
STACK TRACE
at /s03/oracle/prodappl/au/11.5.0/perl/TXK/Error.pm line 219
     TXK::Error::printMsg('TXK::Error', 'ERROR: Reading /tmp//orainst/unix.rgs: No such file or direct...') called at /s03/oracle/prodappl/fnd/11.5.0/patch/115/bin/txkSetConfig.pl line 92
.end err out.
Result : FAILED
===========================================================================
Generate Tns Names
Logfile: /s03/oracle/prodappl/admin/PROD_aqherp/log/01131223/NetServiceHandler.log
     Classpath : /usr/java/jdk1.6.0_11/jre/lib/rt.jar:/usr/java/jdk1.6.0_11/lib/dt.jar:/usr/java/jdk1.6.0_11/lib/tools.jar:/s03/oracle/prodcomn/java/appsborg2.zip:/s03/oracle/prodcomn/java
Updating s_tnsmode to 'generateTNS'
UpdateContext exited with status: 0
java.lang.Exception: Error while generating listener.ora.
     at oracle.apps.ad.tools.configuration.NetServiceHandler.generate806Listener(NetServiceHandler.java:2503)
     at oracle.apps.ad.tools.configuration.NetServiceHandler.processNode(NetServiceHandler.java:2272)
     at oracle.apps.ad.tools.configuration.NetServiceHandler.main(NetServiceHandler.java:2978)
AC-50480: Internal error occurred: java.lang.Exception: Error while generating listener.ora.
Error generating tnsnames.ora from the database, temperory tnsnames.ora will be generated using templates
Instantiating Tools tnsnames.ora
Tools tnsnames.ora instantiated
Web tnsnames.ora instantiated
adgentns.pl exiting with status 512
ERRORCODE = 512 ERRORCODE_END
.end std out.
.end err out.
================================================================================
Uploading file system Context file and its templates to the database
Context file :
/s03/oracle/prodappl/admin/PROD_aqherp.xml
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL=''
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : aqherp
sDbDomain : qudrah.com
sDbPort : 1521
sDbSid : PROD
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@aqherp.qudrah.com:1521:PROD
Connection obtained
-------------------ADX Database Utility Finished---------------
Result : Failed to upload the Context file to the DataBase
     Uploading Context file and its templates to the database...FAILED
StackTrace:
java.lang.Exception: oracle.apps.ad.autoconfig.oam.InDbCtxFileException: SQLException : ORA-04068: existing state of packages has been discarded
ORA-04063: package body "APPS.FND_GSM_UTIL" has errors
ORA-06508: PL/SQL: could not find program unit being called
ORA-06512: at line 1
     at oracle.apps.ad.tools.configuration.FileSysDBCtxMerge.updateDBCtx(FileSysDBCtxMerge.java:685)
     at oracle.apps.ad.tools.configuration.FileSysDBCtxMerge.updateDBFiles(FileSysDBCtxMerge.java:222)
     at oracle.apps.ad.context.CtxValueMgt.processCtxFile(CtxValueMgt.java:1663)
     at oracle.apps.ad.context.CtxValueMgt.main(CtxValueMgt.java:709)
=========================================================================================
After Setting Environment
ORACLE_HOME          : /tmp/
LD_LIBRARY_PATH          : /tmp//lib:/usr/X11R6/lib:/usr/openwin/lib:/usr/java/jdk1.6.0_11/jre/lib/i386/server:/usr/java/jdk1.6.0_11/jre/lib/i386:/usr/java/jdk1.6.0_11/jre/../lib/i386:/tmp//lib:/usr/X11R6/lib:/usr/openwin/lib
PATH               : /tmp//bin:/usr/bin:/usr/ccs/bin:/usr/sbin:/usr/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/s03/oracle/proddb/9.2.0/bin
ORA_NLS               : /tmp//ocommon/nls/admin/data
TNS_ADMIN          : /tmp//network/admin/PROD_aqherp
NLS_LANG               : American_America.AR8MSWIN1256
NLS_DATE_FORMAT          : DD-MON-RR
NLS_NUMERIC_CHARACTERS     : .,
NLS_SORT               : BINARY
CONTEXT_NAME          : PROD_aqherp
AD_TOP               : /s03/oracle/prodappl/ad/11.5.0
FND_TOP               : /s03/oracle/prodappl/fnd/11.5.0
TXK_TOP               : /s03/oracle/prodcomn/rgf/PROD_aqherp
APPLTMP : /s03/oracle/prodcomn/temp
TWO_TASK               : PROD
ORACLE_LOCALPREFERENCE     : /tmp//tools/admin
TNS CONNECT STRING     : PROD
SQLPLUS               : /s03/oracle/proddb/9.2.0/bin/sqlplus
Setting of Environment completed.
SQL Command: SELECT language_code||',' FROM fnd_languages WHERE installed_flag IN ('B','I') AND language_code NOT IN ('US', 'SQ','IS','LT','VN')
ERROR DESCRIPTION:
(*******FATAL ERROR*******
PROGRAM : (/s03/oracle/prodcomn/admin/install/PROD_aqherp/txkFrmUTF8.pl)
TIME : Tue Jan 13 12:24:40 2009
FUNCTION: TXK::SQLPLUS::validateConnectInfo [ Level 3 ]
MESSAGES:
SQLPLUS executable not found in ORACLE_HOME/bin
STACK TRACE
at /s03/oracle/prodappl/au/11.5.0/perl/TXK/Error.pm line 167
     TXK::Error::abort('TXK::Error', 'HASH(0x810dd30)') called at /s03/oracle/prodappl/au/11.5.0/perl/TXK/Common.pm line 299
     TXK::Common::doError('TXK::SQLPLUS=HASH(0x853767c)', 'SQLPLUS executable not found in ORACLE_HOME/bin', 'undef') called at /s03/oracle/prodappl/au/11.5.0/perl/TXK/Common.pm line 314
     TXK::Common::setError('TXK::SQLPLUS=HASH(0x853767c)', 'SQLPLUS executable not found in ORACLE_HOME/bin') called at /s03/oracle/prodappl/au/11.5.0/perl/TXK/SQLPLUS.pm line 346
     TXK::SQLPLUS::validateConnectInfo('TXK::SQLPLUS=HASH(0x853767c)') called at /s03/oracle/prodappl/au/11.5.0/perl/TXK/SQLPLUS.pm line 267
     TXK::SQLPLUS::setConnectInfo('TXK::SQLPLUS=HASH(0x853767c)', 'HASH(0x8537880)') called at /s03/oracle/prodappl/au/11.5.0/perl/TXK/TechstackDB.pm line 588
     TXK::TechstackDB::_getSQLValue('TXK::TechstackDB=HASH(0x853755c)', 'SELECT language_code||\',\' FROM fnd_languages WHERE installe...') called at /s03/oracle/prodappl/au/11.5.0/perl/TXK/TechstackDB.pm line 563
     TXK::TechstackDB::getSQLValue('TXK::TechstackDB=HASH(0x853755c)', 'SELECT language_code||\',\' FROM fnd_languages WHERE installe...') called at /s03/oracle/prodcomn/admin/install/PROD_aqherp/txkFrmUTF8.pl line 147
     eval {...} called at /s03/oracle/prodcomn/admin/install/PROD_aqherp/txkFrmUTF8.pl line 112
ERRORCODE = 1 ERRORCODE_END
.end std out.
.end err out.
======================================================================================================
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: /s03/oracle/prodcomn/admin/install/PROD_aqherp
adgendbc.sh INSTE8_SETUP 1
adgenjky.sh INSTE8_SETUP 1
afcpnode.sh INSTE8_SETUP 1
afgcsreg.sh INSTE8_SETUP 1
txkMultinode.sh INSTE8_SETUP 1
wdbsvr.sh INSTE8_SETUP 1
Directory: /usr/bin/perl -I /usr/lib/perl5/5.8.5/i386-linux-thread-multi -I /usr/lib/perl5/5.8.5 -I /usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi -I /usr/lib/perl5/site_perl/5.8.4/i386-linux-thread-multi -I /usr/lib/perl5/site_perl/5.8.3/i386-linux-thread-multi -I /usr/lib/perl5/site_perl/5.8.2/i386-linux-thread-multi -I /usr/lib/perl5/site_perl/5.8.1/i386-linux-thread-multi -I /usr/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi -I /usr/lib/perl5/site_perl/5.8.5 -I /usr/lib/perl5/site_perl/5.8.4 -I /usr/lib/perl5/site_perl/5.8.3 -I /usr/lib/perl5/site_perl/5.8.2 -I /usr/lib/perl5/site_perl/5.8.1 -I /usr/lib/perl5/site_perl/5.8.0 -I /usr/lib/perl5/site_perl -I /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi -I /usr/lib/perl5/vendor_perl/5.8.4/i386-linux-thread-multi -I /usr/lib/perl5/vendor_perl/5.8.3/i386-linux-thread-multi -I /usr/lib/perl5/vendor_perl/5.8.2/i386-linux-thread-multi -I /usr/lib/perl5/vendor_perl/5.8.1/i386-linux-thread-multi -I /usr/lib/perl5/vendor_perl/5.8.0/i386-linux-thread-multi -I /usr/lib/perl5/vendor_perl/5.8.5 -I /usr/lib/perl5/vendor_perl/5.8.4 -I /usr/lib/perl5/vendor_perl/5.8.3 -I /usr/lib/perl5/vendor_perl/5.8.2 -I /usr/lib/perl5/vendor_perl/5.8.1 -I /usr/lib/perl5/vendor_perl/5.8.0 -I /usr/lib/perl5/vendor_perl -I . -I /s03/oracle/prodappl/au/11.5.0/perl /s03/oracle/prodcomn/admin/install/PROD_aqherp
txkFrmUTF8.pl INSTE8_SETUP 1
AutoConfig is exiting with status 7
Best Regards,

Migration from HP-UX to Linux DB for UPK3.5

Similar Messages

Maybe you are looking for