Miix 3-1030 no usb boot at all, not even with an otg cable

hi lenvovo i'm liking my new miix 3-1030 tablet i purchesed recently but have found the bios to be frankly useless.the tablet has no usb booting at all, nothing shows up in the boot menu except windows boot mangager.i've tried the following; usb hdd'susb sticksotg cableusb dvdrw none show up for booting, this is annoying as i use virtual machines and boot other os's from eithe live cds or usb devices. any chance of a bios update that enables usb booting? i don't want any other options, just the simple ability to boot other devices.

I'm experiencing the same thing with my Miix 2 8. See https://forums.lenovo.com/t5/Windows-based-Tablets/Miix-2-8-no-USB-flash-drive-recognized-with-quot-Device/td-p/2132514 I would like to remove my recovery partition to free up space and then upgrade to Windows 10, but can only do so when I can boot from USB. So far I've been unsuccessful. --Ron

Similar Messages

HT201406 i can't turn on my ipad at all, not even with the sleep keep, how can i start it again

I can't turn on my IPAD, not even with holding the sleep bottom, how can i star my IPad again

Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

I can't sync my notes from I-phone and Ipad2 to the mac anymore, not even with the usb cable!

I can't sync my notes from I-phone and Ipad2 to the mac anymore, not even with the usb cable!

I'm also having this problem.
In fact two things have stopped working with my iPhone recently.
1. iTunes no longer launches automatically when I plug in my iPhone to my iMac.
2. The iPhone Notes app has stopped syncing via USB lead between the iPhone and the iMac.
I have tried closing applications, and rebooting both the iPhone and iMac, but this makes no difference.
I'm running OS X 10.6.8 on my iMac.
My iPhone is a 3G running iOS 4.2.1
Can anyone help?

Miix 3-1030 BIOS: timed boot

I use a Miix 3-1030 as a kiosk. It should shut down in the evening and boot up every morning. Most modern BIOS have the option to fire up the system at a given time. However, I seem unable to find that option in the Miix BIOS. Can somebody enlighten me please? If that option is really impossible, might I be able to attach the Miix to a timed power switch, remove its battery, and configure it to boot up whenever it senses electricity? Not an elegant way of doing things - just a fallback option.

Thank you very much for your help. It's disappointing that this cannot be done via UEFI, but a task schedule would be good enough. Would you (or any other forum discussant) be so kind and offer me some direction on this task? I am familiar with the Windows Task Scheduler, but it's not clear to me how to get the tablet to sleep and, more importantly, to wake it up from sleep (I am conversant with how to time the task though).many thanks!

USB Ultranav keyboard does not work with Windows 7

Hi, I recently installed Windows 7 to my Dell Latitude XT tablet and was disappointed to learn that my USB Ultranav Keyboard only works as a keyboard and not a 'mouse'; that is, the ultranav devices (touchpad, buttons, and trackpoint) do not work. I have not had problems with the keyboard functioning in XP or Vista, so it was surprising to find that it will not work with W7.
I thought all was going well when W7 recognized the Ultranav keyboard when I plugged-in the device, but all did not go as planned. I let W7 find the drivers through Windows update, but then once they didn't prove to work, I followed W7's directions of reinstalling the drivers in its version of 'Compatability Mode', but that still didn't prove to work. I would really appreciate any insights into this problem as it is one of my only (current) hesitancies about using W7.
Thank you for your time and attention to my inquiry.
Cheers,
Tsugazi

Hi, strangely enough, I got it to work. Here's the what I did differently (for those with a similar problem):
After installing W7, I plugged in my keyboard and let Windows find the drivers. When this didn't provide functionality of the ultranav devices, I tried installing the Ultranav drivers, and when Windows said there was a compatability problem, I then opted to let Windows re-install the Ultranav driver. Unfortunately, this didn't provide functionality either.
Jump ahead 12 hrs and re-install of W7 (for other reasons). This time out, I installed the Ultranav driver, THEN plugged in my keyboard. Everything works now! I don't know that this sequence will work for everyone, but it did for me.
Thanks for your comments.
Cheers,
tsugazi

I have an ipad wi-fi cellular 32gb. Died in march after 3 month has been replaced now the replacement has died, holding home key and button on top doesnt work at all, not even if left over night and the next day and night, still nothing.

I was given a ipad after xmas 2012. Within a month it was freezing up and returned to apple to replace. It was sent straight back to me saying it was fine. The day I got it back it was faulty again only this time it was worse, it was switching itself off and turning itself back on when it liked. A back up and restore was completed AGAIN. 3 weeks later it was sent straight back to apple to be replaced, this time a higher authority from apple in brisbane said it was to be replaced immediately. Which it was. Then within 6 weeks this ipad the replacemetn ipad has started having issues by turing itself off. Now it has completely shut itself down and off. Charge was at 81%. I put it on charge as maybe the %% was wrong. A few hours later, tried turning it on by holding top button, nothing happened I have also held down top button and home key for 10 sec, nothing so I tried longer nothing happened. Rang apple support and they have suggested holding top button down for 10 sec then add home key for 10 sec both top button and home for 10 sec then they top button off followed by leaving home key for 10 sec by itself. This did not work. I have tried this again this morning and again at lunch at work and again now tonight. Still nothing at all. Even plugging it into the computer doesn't do anything at all. Has anyone else come across this at all with two ipads doing exactly the same thing. My power points are fine, I've had an electrician check them and my computer is fine aswell. I stumped as to what can be going wrong. Thanks

Is your battery dead or alive?
If the battery is dead, we must find out if it is:
1. Charger problem
2. Cable problem
3. Docking port problem
4. Wall socket problem

I recently connected my iPhone 3GS to my computer, for the new update 3.4.5, but it didn't load at all, not even after 3 hours.. so i tried to disconnect to phone, but the loading meter is still there, like it has frozen, what should I do ?

I recently connected my iPhone 3GS to my computer, for the new update 3.4.5, but i didn't load at all. Not even after 3 hours..
so i tried to disconnect the phone, but the loading meter is still there like it's frozen can't push any button or anything at all.. what should i do?

Restart your iPhone by holding down the on/off and home buttons until your see the Apple logo.

Panther won´t boot at all, Grey screen with apple logo

Help, I installed a Lexmark 1420 this afternoon and printed what I wanted and switched off! that was the last time my emac booted. I only now get they grey Apple logo on the screen, I´ve already tried pram reset, boot with x with shift even the software restore cd won´t read(but I can open the cd draw with the mouse held down.) I been looking through the messages and still can´t find any answers, would be really greatful for some help.
Stuart

Stuart:
Sorry about the glitch. That Disk Utility reports "Underlying task reported failure" when repairing a volume is a serious directory issue that can sometimes be repaired by Disk Warrior.
In terms of getting you data off the HDD to the external Firewire HDD, here are two options.
1. You can use SuperDuper to create a bootable clone of your entire HDD on the external firewire HDD.
2. You can purchase DataRescue II to get your music off. I understand Prosoft has excellent tech support. Give them a call. See also Dr. Smoke's FAQ Data Recovery.
Please keep us updated.
Good luck.
cornelius

Iomega eGo 2TB USB/Firewire 800 drive not working with Time Machine.

The drive I had for Time Machine died and I replaced it with an iomega eGo 2 TB USB/Firewire 800 drive. Time Machine finds it and backs up the disk when I first boot up but then it seems like the drive goes off line. At that point, when Time Machine tires to back up it can't get the drive to respond and my system hangs. To fix that, I turn off the iomega that fixes the hang up and I get the disconnect without ejecting warning.
I ran disk utility and disk warrior. Both apps reported the disk is fine.
Can any tell me what's up? I'm running OS X 10.7.2
Thanks.

I am having this exact same error with my new iMac 21.5" connected to a brand new Iomega eGo 2 TB Desktop Firewire 800 External Hard Drive (Mac Edition - 34796).
The TimeMachine backup works fine, but as soon as the iMac goes to sleep and wakes back up, TimeMachine doesn't respond well to any commands and all sorts of errors appear on the screen.
I will try the tip here from Kappy and report back later if this works for me.
Kappy, one thing to note is that I'm using the Firewire connection from the iMac to the eGo and experiencing this problem. The eGo has its own power supply too.

Bootcamp volume selectable in Startup Disk but won't boot. Bootcamp not visible with Option Key

My bootcamp volume is selectable in Startup Disk System Preference, but Windows 7 will not boot stating no bootable volume. The Bootcamp volume does not appear when option key held down during startup. Windows 7 booted fine before I booted into MacOS. When I tried to reboot in Windows 7, that's when I received the non-bootable error. All looks fine on the Windows 7 volume.
I'm working with a Macbook Pro Early 2008, 256 GB SSD, Windows 7 and the Boot Camp Support Software 4.0.4033.
I tried to re-install Windows 7 on its 32 GB partition, however Windows reported volume is not in proper format???
I tried repairing my Windows 7 volume with my install disk, but apparentl after having to update my initial Windows 7 instalation (disk bought in 2009) about 3 or 4 times, my Windows 7 install disk reports it cannot repair the now updated version of Windows 7 on my hard drive. Lovely. Brilliant engineering.
I looked into editing my partition table, but that process appears more a hack/bandaid for the underlying problem that more than likely still exists.
Any suggestions, other than painfully starting from the beginning???
Thanks.

Well, want to rule out drive case,, as those do come up with EVERY new OS, just hit Lion 10.7 forum when it came out, or when 10.6.0 came out 3 yrs ago.
Maybe the power adapter is the weak link.
As I said, and goes back yrs, not a fan of FW/USB/eSATA case from major vendors (LaCie, WD, Seagate etc).
And you could try another case. Be sure to buy a case that lets you swap in your own hard drives though.
http://www.macsales.com/firewire - look for bare drive case "0" capacity hard drive

Hot Synch does not work, Treo 755p, USB, 17" Mac Pro Laptop, even with RevD installed and Allow other HotSynch applications preference check box checked

Hi,
I am a long time Palm enthusiast who is frustrated. No more Palm products for me or anyone I speak to until I solve this problem. Someone at Palm should be paying attention to their long time cusotmers. I bought Palms in 2002 and 2003.
The support literature coming with two Treo 755p that I bought was so poor that never saw the fine print that there was three months of support if I registered the devices. The registration page does not let me register. All the fields are ghosted after I put in the serial number. I bought one in June 2008 and the other in early 2008. So never registered and can get no help from Palm now it seems.
So beside that gripe below is the problem issue info.
I can't get a Verizon Treo 755p to USB cable Hot Synch with my daughters 17" Mac Pro Laptop. It is using OS 10.5x She lives in another city so I am trouble shooting this remotely.
Did - Revd Palm upgrage has been installed.
PalmDesktopMac421Revd.dmg (17MB)
http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=4518,E=0000000000255177998,K=6239,Sxi=3,case=obj(33...
Did in advanced settings on the Treo select in the Synch preferences allow other Hot Sync applications.
That process worked however on my own Treo 755p Verizon as below:
After much work, hours over several months, I got my my Treo 755p Verizon to Hot Synch with a QuickSilver desk top Mac running os 10.5x.
Did the RevD upgrade.
Did in advanced settings on the Treo select in the Synch preferences allow other Hot Sync applications. Otherwise the Wireless Synch feature prevents a Hot Synch.
Once those both were done than Hot Synch works fine, and Wireless Synch works fine and does not interfere.
The Wireless on both PDAs is scheduled to be removed on both Treos due the economy on Feb. 4th, so I would like the HotSynch to be working so her Treo is backed up.
Thanks so much to anyone who replies to help out.
Best
Post relates to: Treo 755p (Verizon)
Post relates to: Treo 755p (Verizon)
This question was solved.
View Solution.

Works now, she had created a user ID as prompted when installing the HotSynch Software, but it was not the same name of the Treo 755p. The default ID was the one she from installing the software, so it showed nothing in address or contacts, but when she switched to the Treo ID than all her stuff was there.
Post relates to: Treo 755p (Verizon)

Keyboard, Trackpad and USB on Mac Air not working with latest OS update

My 2009 Mac Air after the last OS update, the only thing that seems to work now is the power button. The USB port, Keyboard and trackpad all dead. Help!

Reset PRAM. http://support.apple.com/kb/PH18761
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best.

Ipod won't let me into wifi at all not even to select a network. It's been like this ever since I restored my Ipod 4g and it will not let me do anything, not even download music to my ipod, restoring it also lost all of my data

     I knew that I needed to update my Ipod (4th gen) but it randomly stopped using the wifi and when I would go into "wi-fi" under "settings" the loading wheel would not stop spinning yet there are 5 wi-fi networks around me. Then I turn my ipod off, then on again and when it turned on it had an icon that was the itunes logo and a usb cord and that was it.. so I plugged my ipod into my computer got onto Itunes and it said that I needed to restore my ipod. I knew that all my data would be lost but now I can't even go into the wifi settings to select a network... it has the wi-fi connection icon(the little arcs) then "Wi-Fi" then across the bar thing it says "No Wi-Fi" I don't understand.. I do have Wi-Fi or else I wouldn't be able to type this on a computer....
     How do I hook up the wifi network selections to my ipod???

If not this:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar
Then
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

USB port malfunction - iTunes not syncing with iPod

to all those apple veterans,
I am using my boyfriend's ipod and in the past, when i plug his ipod into my usb port on my sony computer windows XP, it has always appeared under 'my computers" where i could register my files. I had my itunes library for my ipod shuffle, so i never had any problems with my iTunes tracking my bf's ipod. a few months ago, i reinstalled my operating system and now when i try to plug in his ipod to his computer with his registered snyced iTunes so he could access the files and music on his ipod, the USB is not recognizing the iPod. Why is that? could someone helpe me? why is the usb port not recognizing the iPod when it worked in the past previously? note: i do have the newest itunes 7.0 installed.

Maybe:
https://discussions.apple.com/message/22783947#22783947

Seagate Backup Plus Slim External USB 3 Hard Drive Not Working with Mac Pro

Hi, I have just purchased a brand new Mac Pro. I have three 2 TB Seagate Backup Plus Slim External USB 3 hard drives that just don't jive with the new Mac Pro's. When the drive is connected, I cannot access the drive, read/write or even format. Finder completely locks up and the drive cannot even be force ejected. When I try to format, Disk Utility either spits out an error that the drive cannot be read, or simply locks up. This happens regardless of the OS on the Mac Pro. I am currently running 10.10.2
I have ruled out an issues with the drives, as I have tested all of them on a variety of systems and OS's, including Power Mac, Mac Book Pro, PC, OS 10.7, 10.8, 10.9 as well as on Windows. I have tried formatting in every file system including Mac OS Extended, Mac OS Extended (Journaled), NTFS and exFAT. ALL other systems have no issues with the drives. Apple has replaced my Mac Pro with a brand new one and the drives still behave the same way. Furthermore, I have tested the drives on three other Mac Pro's at work and they all reject the drives. So, on their own, there is nothing wrong with the Mac Pro, or the drives. However, the configuration of them together is wreaking havoc.
I have contacted Seagate, and this was their response:
The most recent version of the Backup Plus drives use the USB Attached SCSI (UAS) standard to increase transfer rates. It's possible that the drivers being used currently on your Mac Pro are having issues using this feature with the standard USB 3.0 drivers installed. I would recommend contacting Apple to check for any driver updates or see if they any suggestions for issues involving drives using UAS.
I have also started a case with Apple Support (Case # 755934373) and am waiting to hear back regarding Seagate's response. I've spent DAYS trying to troubleshoot this and am now at a complete loss. If anyone has any ideas, I'm all ears (or eyes in this case).
Thanks!

Hi danielsh6,
I recently bought the new Lacie Thunderbolt 2 D2 3TB and I had the same problem as you, i have a macbook pro early 2011, those support thunderbolt but many times there is a bug that doesn't let you connect any thunderbolt drives to your computer. The solution I found was installing this update:
Thunderbolt Firmware Update v1.0
Before doing this I would recommend you updating to mountain lion (not yosemite yet as there is still some glitches and more on preview's macbook pro's).
Hope this helped!
Forest

Miix 3-1030 no usb boot at all, not even with an otg cable

Similar Messages

Maybe you are looking for