MinOccurs=0 not possible in validation

Hi I have a simple xsd that looks like:
<xs:complexType name="SLATemplate">
<xs:sequence>
<xs:element name="name" type="xs:string" />
<xs:element name="description" type="xs:string" />
<xs:element name="customer" type="xs:string" minOccurs="0"/>
<xs:element name="date" type="xs:string"/>
</xs:sequence>
</xs:complexType>
<rootSla xmlns="slm">
<name>Bookstore SLA</name>
<description>Performance Monitoring</description>
<date>07-06-2007</date>
</rootSla>
When I validate the document loaded in, it complains that <date> is not expected. If I add in the <customer> manually, the validation succeeds. Does anyone know why minOccurs=0 does not work in this case?
I am using orajaxb xdk.
Thanks.

The sequence element does not have a restriction for the minOccurs to not be 0.
minOccurs may be a non-negative integer.
<sequence
id = ID
maxOccurs = (nonNegativeInteger | unbounded) : 1
minOccurs = nonNegativeInteger : 1
{any attributes with non-schema Namespace}...>
Content: (annotation?, (element | group | choice | sequence | any)*)
</sequence>

Similar Messages

  • Acrobat Pro 10.12 not possible to sign a pdf with a valid cert

    Hello,
    Under Windows 7 x64, it's not possible to sign a PDF with a valid certificate. Clicking the sign button gives no response and no message what so ever. When using a non valid certificate as in not certified to use for signing, it is accepted and the document is signed?!
    Cheers,
    Andre

    Hi, Daniel.  
    Thank you for visiting Apple Support Communities.  
    I would need a little more information on how you are adding a signature to provide a better answer.  However, here is an article that I would take a look at.  
    Mail (Yosemite): Mark up attachments
    http://support.apple.com/kb/PH19143
    Cheers, 
    Jason H.  

  • Parameter validation failed. It is not possible to provide valid values for all parameters

    I'm trying to test passing in parameter values from the URL.    I have RS 2008 .   I created an ultrasimple report based on a stored procedure output.  There is no validation, No available values, No default values.  
    I'm trying to run the report like this:
    /Reports/Pages/Report.aspx?ItemPath=%2fProduction%2fDBA+Reports%2fTest&iTest=1
    I get:
    Parameter validation failed. It is not possible to provide valid values for all parameters. (rsParameterError)
    the one int parameter is iTestId 
    The RS log file says the following:
    processing!ReportServer_0-54!9138!01/25/2013-09:22:51:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Parameter validation failed. It is not possible to provide valid values for all parameters., ;
      Info: Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Parameter validation failed. It is not possible to provide valid values for all parameters.
    What am I missing?

    Hi F-ram,
    From your description, you want to pass multiple parameters via URL, right? To pass multiple parameters through URL, we can use an ampersand (&) to separate them. For example, I have a report with two parameters p1 and p2. The report is deployed in a
    folder on the Report Server. When I navigate to the report on the Report Server, I can see the report URL is http://localhost/ReportServer_SQL2008NEW/Pages/ReportViewer.aspx?%2fFolder%2fReport&rs:Command=Render.
    If I need to pass parameters through URL, I can just add &p1=value1&p2=value2 at the end of the URL and the entire URL would be http://localhost/ReportServer_SQL2008NEW/Pages/ReportViewer.aspx?%2fFolder%2fReport&rs:Command=Render&p1=value1&p2=value2
    If you have any questions, please feel free to ask.
    Regards,
    Charlie Liao
    Charlie Liao
    TechNet Community Support

  • Not possible to output CFTREEITEM in a CFC function?

    Hi there,
    I am parsing a sorted list of strings (in the form of a/b/c/,
    a/b/c, /a/c/d etc.) and trying to make a treeview out of it.
    I have the CFFORM and CFTREE tag in the top function and the
    code that generate CFTREEITEM in a subfunction, but I got the
    following error:
    Context validation error for tag cftreeitem.
    The tag must be nested inside a cftree tag.
    It seems that ColdFusion doesn't recognize that calling code
    is already nested inside a CFTREE tag in the top function. I
    extract the code generating CFTREEITEMs to a sub function because
    it is called multiple times from different context, it would be a
    lot of hassle and quite stupid to "inline" it.
    If what I am trying is, for whatever reason, not possible,
    would it be possible then to have the sub function generate the
    code into a string and somehow dynamically evaluate that?
    Any hints or tips will be greatly appreciated!
    Billy

    Hi there,
    I am parsing a sorted list of strings (in the form of a/b/c/,
    a/b/c, /a/c/d etc.) and trying to make a treeview out of it.
    I have the CFFORM and CFTREE tag in the top function and the
    code that generate CFTREEITEM in a subfunction, but I got the
    following error:
    Context validation error for tag cftreeitem.
    The tag must be nested inside a cftree tag.
    It seems that ColdFusion doesn't recognize that calling code
    is already nested inside a CFTREE tag in the top function. I
    extract the code generating CFTREEITEMs to a sub function because
    it is called multiple times from different context, it would be a
    lot of hassle and quite stupid to "inline" it.
    If what I am trying is, for whatever reason, not possible,
    would it be possible then to have the sub function generate the
    code into a string and somehow dynamically evaluate that?
    Any hints or tips will be greatly appreciated!
    Billy

  • NOT POSSIBLE TO START ESSBASE WHEN SSO INITIALIZATION FAILS

    Version is 11.1.1.3. My Essbase is not starting. Issues from the logs and what I have attempted are as follows. I have highlighted the relevant areas in bold.
    When Starting Essbase from products/Essbase/bin/start.bat:
    C:\Hyperion\products\Essbase\bin>start.bat
    C:\Hyperion\products\Essbase\bin>REM eis
    C:\Hyperion\products\Essbase\bin>net start "Hyperion Integration Services"
    The requested service has already been started.
    More help is available by typing NET HELPMSG 2182.
    C:\Hyperion\products\Essbase\bin>REM APS
    C:\Hyperion\products\Essbase\bin>call C:\Hyperion\products\Essbase\aps\bin\start.bat
    C:\Hyperion\products\Essbase\bin>REM aps
    C:\Hyperion\products\Essbase\bin>net start HyS9aps
    The requested service has already been started.
    More help is available by typing NET HELPMSG 2182.
    C:\Hyperion\products\Essbase\bin>REM EAS
    C:\Hyperion\products\Essbase\bin>call C:\Hyperion\products\Essbase\eas\bin\start.bat
    C:\Hyperion\products\Essbase\bin>REM eas
    C:\Hyperion\products\Essbase\bin>net start HyS9eas
    The requested service has already been started.
    More help is available by typing NET HELPMSG 2182.
    C:\Hyperion\products\Essbase\bin>REM EssbaseAgent
    C:\Hyperion\products\Essbase\bin>net start hypservice_1
    The service name is invalid.
    More help is available by typing NET HELPMSG 2185.
    C:\Hyperion\products\Essbase\bin>REM EssbaseStudio
    C:\Hyperion\products\Essbase\bin>C:\Hyperion\products\Essbase\EssbaseStudio\Server\startServer.bat
    C:\Hyperion\products\Essbase\bin>setlocal
    C:\Hyperion\products\Essbase\bin>set CONFIGTOOL_HOME="C:\Hyperion\common\config\9.5.0.0"
    C:\Hyperion\products\Essbase\bin>call ""C:\Hyperion\common\config\9.5.0.0"\setJavaRuntime.bat"
    Logging configuration file is not found. Expected filename is C:\Hyperion\products\Essbase\bin\.\server.properties
    Log file location is:
    C:\Hyperion\logs\esbstudio\server.log
    13:23:09 11/01/11 INFO Starting up
    13:23:09 11/01/11 INFO Oracle Essbase Studio Server. Version 11.1.1.3.00, Bui
    ld 090, June 25 2009
    13:23:16 11/01/11 (system) WARNING Failed to load driver for sap
    13:23:16 11/01/11 (system) SEVERE Cannot load Teradata connector
    13:23:16 11/01/11 (system) WARNING Failed to load driver for teradata
    13:23:16 11/01/11 (system) WARNING Failed to load driver for mysql
    13:23:16 11/01/11 (system) WARNING Failed to load driver for netezza
    Essbase.log:
    [Tue Oct 25 11:26:31 2011]Local/ESSBASE0///Error(1051223)
    Single Sign On function call [css_init] failed with error [CSS Error: CSS method invocation error: com.hyperion.css.CSSSystem.<init>]
    [Tue Oct 25 11:26:31 2011]Local/ESSBASE0///Info(1051198)
    Single Sign-On Initialization Failed !
    [Tue Oct 25 11:26:31 2011]Local/ESSBASE0///Info(1051232)
    Using English_UnitedStates.Latin1@Binary as the Essbase Locale
    [Tue Oct 25 11:26:31 2011]Local/ESSBASE0///Error(1051527)
    In Shared Services Security mode it is not possible to start Essbase when single sign on initialization fails.
    AND
    C:\Hyperion\logs\essbase\SharedServices_Security_Client.log com.hyperion.css.CSSSystem.<init>(Unknown Source)
    2011-10-25 11:26:11,039 INFO [main] Configure CSS with registry com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
    2011-10-25 11:26:11,039 INFO [main] Initializing CSS from Registry. com.hyperion.css.common.configuration.CSSConfigurationManager.getConfiguration(Unknown Source)
    2011-10-25 11:26:11,085 INFO [main] Trying to get Registry Instance com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
    2011-10-25 11:26:31,023 ERROR [main] 20:1092:Failed to initialize EPM System registry. *[Root Cause: java.sql.SQLException: [Hyperion][SQLServer JDBC Driver]Error establishing socket to host and port: machinex:1433. Reason: Connection refused: connect ] com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)*
    *2011-10-25 11:26:31,023 ERROR [main] Arguments: param1={}, param2=null, param3=C:\Hyperion\logs\essbase\,* com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
    2011-10-25 11:26:31,023 INFO [main] CSS system intialization failed. : [21484 ms] com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
    What I have attempted:
    - Attempted to connect to Shared Services, Workspace url's - YES
    - Checked openLDAP & my Database is running - YES
    - Added following to Configuration File :
    SharedServicesLocation machinex 28080
    AUTHENTICATIONMODULE CSS http://machinex:28080/interop/framework/getCSSConfigFile YES, but same error
    - Changed essbase.bak to essbase.sec YES but same error
    - netstat -an to check for 1423. Port 1423 is not listening, although ALL TCP Ports have been enabled. So YES but same error.
    - Read Knowledgebase article # 954322.1 - the suggested things in there don't seem to apply to my case, unless I am missing something.
    At this point does anybody have any suggestions ?

    An update: Just for kicks, I tried restarting Essbase using Start->Programs-EPMSystem->Essbase->EssbaseServer->Essbase.bat and apparently now Essbase is started.
    EAS, Studio and Planning however are down.
    Excerpt from the HyS9eas-sysout.log:
    [ERROR] RegistryUtils - SQL Exception when trying to create a new connection [Hyperion][SQLServer JDBC Driver]Error establishing socket to host and port: machinex:1433. Reason: Connection refused: connect
    * CRITICAL ERROR: Common Security Services initialization failed. Please *
    * make sure that a valid entry is provided for SECURITY_CONFIGURATION in *
    * OlapAdmin.properties. This is required if Shared Services is enabled. *
    * Please restart the server after the changes. *
    Stopping DAO factory!
    HBR Configuration has not been initialized. Make sure you have logged in sucessfully and there are no exceptions in the HBR log file.
    java.lang.ExceptionInInitializerError
    .... bunch of java code.
    This is really strange. There is NOTHING that I changed, started or stopped which could have caused Essbase to start magically all of a sudden.
    Any insights into the cause of all this ?

  • Pages document "could not be read" bc. it "does not have a valid format"

    The document in question was properly saved and Pages was not open when my computer hung as it was shutting down. MS Word would not quit or force-quit and I had to hard restart the computer. When I later tried to open this Pages document, which I had been working on before Word froze, Page would not open it and responded with the error message: "This document "document_name.pages" could not be read. This document does not have a valid format." When I looked at the document in question I noticed that its file size was 0KB. I have no idea why this happened, but I suppose it has to do with my computer not shutting down properly and perhaps with Word freezing. If I repair my drive permission, re-index it, anything, will it help? Just a note on the status of this machine: spotlight stopped working earlier this morning and I was waiting to finish this document before repairing disk permissions and trying to fix that issue with Spotlight.
    In the meantime I have tried various fixes. First I tried to change the file ending to .zip, unpack it and open it. Then the same, but this time I tried to view package contents. It doesn't show up in the contextual menu as even having a package to show the contents of. The file is effectively empty, but I don't know where the contents went! The funny thing is that the MS Word doc was recovered automatically. Is it possible that Pages doesn't have an auto-recovery mechanism?
    I need this file urgently, or at least the text in it. It is the bibliography of an important paper due tomorrow at 5 pm.Any advice or suggestions would be greatly appreciated.
    BTW, I have used a file-recovery program in the past. It is called "Stellar Phoenix" and it worked wonderfully to find a Word doc that I accidentally deleted. It can't find .pages document though. In order to do so, I would need to tell the program what the average file size is, as well as the header information as follows. "Header (in hexadecimal)" "At Offset (in decimal)". I have no idea what this means, but if I could insert it, perhaps it could find the lost data. Should I have it search for .pages, .zip, .xml? I'm at a loss, but I know that it doesn't recognize .pages. In the meantime, I sent a support email to them and will see what happens.
    Thank you for your help.
    David

    I can't respond before.
    When the system say that your file size is 0KB, it means that nothing was saved. Only a file descripto exists.
    So, there is nothing to recover.
    Given the time the system crashed, you may have :
    (1) a simple descriptor with nothing written
    (2) a folder with every or only some of the required files.
    In this case, Phoenix is useless : it's unable to revive a folder.
    (3) a flatfile (a compressed version of the folder named above). It's only this kind of file which Phoenix may revive.
    With a bit of luck, Phoenix would be able to revive the index.xml file which was in the original folder created in the temporary folder.
    This file starts with :
    <?xml version="1.0"?><sl:document xmlns:sfa="http://developer.apple.com/namespaces/sfa"
    or
    <?xml version="1.0"?>
    <sl:document xmlns:sfa="http://developer.apple.com/namespaces/sfa"
    The minimal size for a Pages index.xml file is : 520038 bytes.
    If you retrieve the index.xml file, we may try to rebuild an usable package.
    Ask the recovery tool to transfer the recovered file on an other media.
    If the document embedded pictures, the index will give their path and their size which may be useful to recover them.
    Yvan KOENIG (VALLAURIS, France) lundi 1 novembre 2010 10:27:44

  • Internet Connection - Your Apple wireless device does not have a valid IP.

    I just bought an Apple TimeCapsule and set it up normally, following instructions to my Arris cable network on the Videotron provider here in Quebec, Canada. The TimeCapsule did appear as a wireless device on my MacBook Pro (after updating the AirPort software from the provided CD - as was instructed). I went through the whole installation process to obtain at the end this error:
    Internet Connection - Your Apple wireless device does not have a valid IP.
    The only provided instructions were to check the cable and then contact your Internet provider. Well it seems clear to me that if I contact my provider and say that the internet connection works fine directly on my computer, also fine through my "normal" wireless router but not with my new TimeCapsule, I won't get much of a response.
    After a lot of research, a friend indicated the solution in my case.
    You have to really reset the cable modem to convince it to start giving out IPs again.
    To do this:
    1. Unplug your TimeCapsule (possibly you might have to reset to factory defaults - see the documentation)
    2. Unplug your cable modem
    3. Reset your cable modem by pressing the reset button with a pen (or something) for several seconds.
    4. Plug your cable modem back in and let it reboot/restart - until the lights are back on.
    5. Plug in your TimeCapsule
    Everything should now work and you can restart your AirPort set-up on your Mac.
    Good luck!

    My ISP is AOL.  The service is DSL via a broadband modem.  Somewhere during the setup process there appears to be a communicatiosn issue between the Airport Extreme Base Station and the DSL modem.  When I hook the DSL modem directly to my iMac I can connect to the internet without any issues. 
    I tried the factory reset and the DSL modem reboot process described in other posts and seemed very close to success...until the internet setup step.  That is where this issue first presented itself.

  • ABT1N  Intercompany Asset Transfer  error: AA390   T type 230 not possible

    Dear experts,
    I am trying to post an intercompany asset transfer with trx code ABT1N but when simulating the error code
    Transaction type 230 not possible (posting to affiliated company) appears. This is the explanation of the error:
    Message no. AA390
    Diagnosis
         For the current document, you specified either implicitly (via the
         customer/vendor), or explicitly (with a manual entry), that this posting
         is to an affiliated company. In this case, Asset Accounting requires you
         to use special transaction types.  This enables the system to separately
         identify such transactions.
    I do not understand the error because TType is "Retirement to affiliated company with revenue" so should be correct.
    Does anybody know what could be wrong?
    Cheers

    Hi
    Firstly, check out Note 209643.                                                                               
    Secondly, please read the long text of the error message again. The           
    transaction type must be set as "post to affiliated company".  And            
    you must check back the followings :-                                                                               
    1.  Please execcute function:  SAP IMG -> FI -> asset accounting ->           
        transaction -> specify default transaction type.                          
        You can find the default transaction type for "retirement from            
        inter-company transfer" and "acquisition from inter-company               
        transfer".                                                                               
    Then check in their definition whether they are relevant to               
        affiliated company.                                                                               
    If they are NOT RELEVANT to affiliated company, you can                   
        substitute them with other transaction type Relevant to affiliated        
        company.                                                                               
    2.  Please check the definition of transfer variant. In the transfer          
        variant, you have assigned the transaction type for both retirement       
        and acqusition for relation type 1. Both transaction types should be      
        set as "post to affiliated company" .    
    Please note that the abovementioned points must be checked because        
    the system logic will check the validity of the default value in          
    Point 1.                                                                               
    Then the transaction type in the point 2 will be used instead and         
    re-checked again.                                                                               
    Have you try to use 'No Reveune' in the specification for revenue?,       
    I think if it is afflicated companies, you are not allowed to use         
    revenue.                                                                               
    This error can also be produced because a wrong definition of the trans-  
    fer variants. Please have a look on note 327088 for further details.                                                                               
    Most of the issues on this matter were solved with this last Note.        
    Cheers, Blaz

  • Use of dynpro services is not possible in the current system status

    Hi,
    I am new to all of this and new to SAP. I will bew self learing my way into CRM SOA,  working with the web service creaiton i keep getting the following errlr when rtying to Activate a new created web service:
    "Use of dynpro services is not possible in the current system status"
    not knowing the system that well i wonderin if there is missing configuration. This is CRM 7.0
    Exception Class CX_SY_SEND_DYNPRO_NO_RECEIVER
    Error Name DYNPRO_SEND_IN_BACKGROUND
    Program SAPLSKEY
    Include LSKEYU03
    Line 33

    Hi Keith,
    Welcome to the SCN forums!
    SAPLSKEY
    You should first check your Abap dumps using tranaction code ST22, this usually provides more detail on the problem.
    In this case I think it's trying to return a screen (or pop-up message) that can't be handled while activating the web service. The "SAPLSKEY" tells me that it might be licence related, do you have a valid developer's licence for Abap development work? If not apply for one (find out the procedure from other Abap developer's that you may work with) & check if that makes a difference while activating.
    Regards, Trevor

  • Pricing at time of goods receipt not possible for this item

    We're receiving error Message no. 06634 Pricing at time of goods receipt not possible for this item when trying to change the PO Pricing Date Category from No Control to 5 GR Date.
    The error message is clear and reads:
    Pricing at time of goods receipt not possible for this item
    Message no. 06634
    Diagnosis
    For this purchasing document item, you wish to specify that a new price determination process is to be carried out at the time of goods receipt.
    System Response
    Pricing cannot be carried out for the item at the time of goods receipt because the price was either entered manually or copied from the last purchasing document.
    The scenario is that we have a contract reference on a PO and the contract condition records are to be maintained as a new price is valid each day.  The problem without this is that the new pricing will not be reflected in the GR.
    What is the solution to overcome this issue?
    NOTE:  the Info Record conditions are not being read during GR as the PO references a contract.

    For further clarification the PO is referencing a contract and as such not pulling the pricing information from the info record and instead pulling the price from the conditions on the contract. 
    I want to change the pricing date category from " No Control" to "5 GR Date" however I'm receiving the error message stated and unsure of how to make this change.
    The intent is not to create a new PO each day the condition record is created and instead we are utilizing one PO referencing one contract with multiple date delimited condition records containing the daily pricing.

  • The specified UNC path does not contain a valid WIM file or you do not have permission to access it. please specify a valid path

    I loaded 4 captured images into SCCM via the Add Operating System Image Wizard 2 months ago.
    I have since captured another image to the same location (which is the SCCM site server) and tried to add it to the server.
    I am getting error
    the specified UNC path does not contain a valid WIM file or you do not have permission to access it.  please specify a valid path
    nothing has changed on the site server that i can think of.
    i am domain admin and permissions have not changed.
    anyone got any answers?
    please help i am baffled

    I am having similer issues.
    Win 2003 SP2 - SCCM2007 SP2 R2 single site with MDT2010 intergrated but can not get a MDT2010 TS Captured WIM to import into SCCM OS Images "Invalid WIM". allso i tried to mount the MDT WIM image without luck (Invalid Image). however a SCCM TS
    will Capture and I can Import it into OS Images. it seems like something is amiss with MDT or WAIK possibly.

  • HRMS - Payslip / Is it not possible to print the 'Currency' on the payslip

    Hi, using HRMS within eBiz Suite, is it not possible to show/display/print the 'currency' field on the payslip ?
    I am asking because in a particular location, several currencies may be used.
    Thanks in advance.

    Hi,
    Actually the Excel format generated by XML Publisher is XHTML ... so the print process would need to convert XHTML to Postscript (similar to PDF being converted to Postscript by pdf2ps).
    But you question is still valid... unfortunately I haven't tried it ... anyone else?
    Regards,
    Gareth
    Blog: http://garethroberts.blogspot.com/

  • Server0 getting down and logon not possible ( error in license check)

    Hi Guys,
    I rebooted my SAP server and after that server0 is in disabled mode, well both the boxes seems to be green but the server0 node in disable mode as if it is maintained by some parameter and I have changed it, which is not the case, also there is no log with dev_server0 since then. I have followed 723909 note and also copied the parameters of a running server but didn't get success. Also when I am trying to login through SAPGUI its giving me error " Logon not possible( error in license check)" while the license is already installed.
    dev_w0 log says
    M Wed Sep 01 14:42:14 2010
    M  *** ERROR => sap license, no valid license found [likeyapi_w.c 2260]
    M  *** ERROR => wlikey_check_webas: There is a permanent license key for "NetWeaver_ADA" in the system but it has never been checked successfully. In this situation a temporary license key mustn't be installed. [sliclikey.c  1314]
    M  *** ERROR => The temporary license key for NetWeaver_ADA could not be installed [likeyapi_w.c 2305]
    SAP ECC 6.0 release 700
    DB: MaxDB
    OS: Win2k3 server
    Please help.
    Regards
    Mridul Gupta

    License issue is resolved but server0 node is still in disable status while the instances shows green, I checked dev_jcontrol log and found :
    [Thr 2168] [Node: server0] java home is set by profile parameter
         Java Home: C:\j2sdk1.4.2_25-x64
    [Thr 2168] JStartupICheckFrameworkPackage: can't find framework package E:\usr\sap\W6Q\DVEBMGS12\exe\jvmx.jar
    JStartupIReadSection: read node properties [ID123322550]
    -> node name          : server0
    -> node type          : server
    -> node execute       : no
    -> jlaunch parameters :
    -> java path          : C:\j2sdk1.4.2_25-x64
    I think the node execute sud be yes, I just wanted to know how I can enable this.
    Regards,
    Mridul Gupta

  • "The interface name given does not specify a valid and existing interface."

    Hi nice guys,
     I'm trying to use the XNET APIs to set Master task to Slave with LIN protocol. As I have no Experience before, there's something problem like the Interface of the NI USB-8476S can't be detected. The prompted windows presents following infomation:
    Error -1074384758 occurred at XNET Create Session (Signal Output Single-point).vi:1
    Possible reason(s):
    NI-XNET: (Hex 0xBFF6308A) The interface name given does not specify a valid and existing interface. Solution: Use a valid and existing interface. These can be obtained using MAX, XNET system properties, or the LabVIEW XNET Interface IO name. If you are using CompactRIO, refer to the topic "Getting Started with CompactRIO" in the NI-XNET Hardware and Software Help.
    but in the NI MAX, the device is detected as "LIN0". Even the interface input control in the NI examples shows the error. But if I take the CAN Frame API, it works well.
    Does anyone have some idea. I'm so preciate. Tanks in advance.
    best regards
    Melo

    Melonetern,
    When do you receive these errors?  Does this happen when you try to run your code or our examples?  On top of that, does this error happen immediately or does it take a while?  Is this happening in LabVIEW or another interface?
    If you could give us the versions of software you are using as well as the XNET driver versions that would be very helpful.
    Matt J
    Professional Googler and Kudo Addict
    National Instruments

  • Scenario:SAP-XI-AS/400; Ack not possible and DB insert issues.

    Hi,
    I have a SAP-XI-AS/400 scenario and I have two issues with the same.
    1. When I trigger an IDoc to the XI system, I get ack status(in SXMB_MONI) as: "Acknowledgement not possible". The message is : "Unable to convert the sender service to an ALE logical system"
    2. While trying to do a DB insert I get the below Error and DB insert is not happening.
    " Error Unable to execute statement for table or stored procedure. '<table_name>' (Structure 'Statement_<table_name>') due to java.sql.SQLException: [SQL7008] <table_name> in <lib> not valid for operation.
    Error JDBC message processing failed; reason Error processing request in sax parser: Error when executing statement for table/stored proc. '<table_name>' (structure 'Statement_<table_name>'): java.sql.SQLException: [SQL7008] <table_name> in <lib> not valid for operation.
    Error MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Error processing request in sax parser: Error when executing statement for table/stored proc. '<table_name>' (structure 'Statement_<table_name>'): java.sql.SQLException: [SQL7008] <table_name> in <lib> not valid for operation.
    Error Exception caught by adapter framework: null
    Error Delivery of the message to the application using connection JDBC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Error processing request in sax parser: Error when executing statement for table/stored proc. '<table_name>' (structure 'Statement_<table_name>'): java.sql.SQLException: [SQL7008] <table_name> in <lib> not valid for operation.. "
    I have been using the same kind of query we use for other succesful dB inserts.
    Can you please give me a solution and suggest possible reasons and workarounds?
    Thank you
    Best Regards,
    Smitha

    Smitha,
    Go through this links....
    Some Experts discussions..
    Error while updating JDBD table
    JDBC Error
    Error when executing statement for table/stored proc  DB2 - Data Truncation
    Hope this info is useful to you..
    Thanks,
    Satya Kumar

Maybe you are looking for

  • What are the steps to prepare your desktop environment to run OA Framework

    Hi, I need to run some OA Framework pages on my pc, I try to open it from my jdeveloper and use the following steps. 1. FTP the .class & .xml files from $JAVA_TOP to your PC, into jdevhome/myclasses 2. Copy contents of my classes into myprojects 3. D

  • HT1727 If you buy something from an Ipod touch how can you get it on your computer?

    I bought a song on my ipod touch because It obviously has internet and I thought it wouldn't be a problem. I was able to download the song and listen to it on that ipod touch without any issues, however, I would like to be able to burn it to a cd, li

  • ASM use for small scale datawarehouse ?

    Hello guys, We are working on a Datawarehouse (ard 50G ) architecture with the following acquired environment: Single server X3650 M4 Dual CPU ( 16 core in total ) with 48G ram Oracle standard 10g x64 Windows 2008 x64 128 SSD x 8 IBM ServeRAID M5110e

  • Sign-in rule

    In Business catalyst, when creating a sign in page: Is there a way to set a sign-in rule for example: all emails must end in @sci-us.com

  • What are the chords used in the Smart Keyboard?

    In Garageband for iPhone 4, what are the preselected chords used in Smart Keyboard? I wish to play on my digital piano the preselected chords that are in the Smart Keyboard. I tried doing it by ear but can't seem to get it right. Thank you.