MIRO Split out line item based on different tax amounts
Hello Friends,
We have a scenario where we get different tax rates related to the same line item quoted on the invoice which we receive from the vendor. The split out of the line item amount into different tax rates is not known at the time of booking the PO. For example, the PO line item is enter with value 1000Eur. This now shows as one line item in MIRO.
However, when the paper invoice is received fom the vendor, the 1000Eur may be split between delivery cost of 800Eur with tax rate of 10% and legal fees of 200Eur with tax rate of 5%. These tax rates are not always 10% and 5%, they can vary depending on whatever the itme on the PO is.
Is there any way in MIRO to split out the single line item into separate line items to allow us book a part of the line item with tax rate of 10% and the other part with tax rate of 5%?
Or suggestions of how to handle this scenario in SAP (apart from going backwards and altering the PO to split into 2 separate line items which is later in the process and involves alot of overhead etc)?
We tried to activate the Amount Split functionality but (1) this does not seem to allow a split out by tax code and (2) it seems limited only to the Finanl Invoice amount.
Thanks for any help.
Regards
Mik
No feedback so closing
Similar Messages
-
In vendor line item not showing withholding tax amount and withholding base
Hi Gurus,
When i am using T,code FBL1n for details clear item,in line item doesn't showing withholding tax amount and withholding base amount for some vendors when i am using FB03 there showing tax amount and base amount,in option is there.plz help me,its very urgent.
Thanks & regards,
Dharma.Im not sure but may be its because in the config. of 1099 Withholding tax we usually say that the with holding is to be posted only after payment of the open items.
So, lets try this. Look at if the documents which are showing withhld tax in FBL1N if they are paid or not.
this would give us some help or hopefully the answer..
regards -
Completion and approval workflows in line item based SC approval scenario
Hi SRM experts,
We are on SRM 7 ECS , support pack SAPKIBKV08
We are designing line item based SC approval workflow. We also have completion workflow. i.e after requester creates a shopping cart, it goes to buyer as per completion workflow( if the SC does not have price , vendor or has a free text) , and then after the completion workflow, it goes to main SC approval workflow.
My questions are :
1. If a requester creates 2 line items in SC , and 1 line item does not have price/vendor/or material , whereas 2nd line item has price/vendor/ and material , can we send onlt the 1st line item to completion workflow and not send the 2nd line item in the completion workflow but directly to SC approval workflow ? OR we have to send the entire cart to the completion workflow ?
2. After the completion and the approval workflow , if line item 1 is approved, can it create a PO , whereas the 2nd line be still in approval . i.e do all the cart items need to be approved before creating POs or as and when individual line items get approved , they can create thier own POs
Rgds
SumendraHi Sumedra,
Which workflow are you using - application or process contrlled workflow?
Assuming you are using process-controlled workflow - I will answer following questions -
1. Can offline approval be used for item based shopping cart approval workflow?
- Yes, it can be used !
2. Can different line items be sent by mail to different mail boxes?
Yes
3. Will 1 manager see all the 10 line items OR only the 1 line item for which he is responsible?
1 manager can 'see' all the items but he can only approve or reject the item that he is suppose to act on. All other item will be grayed out. However, this behaviour is configuarable !
4. If he will get only line for which he is responsible , and once he clicks on approve , will this approval apply to his line item only , OR it will apply to all the 10 line items ?
- see above
Regards,
Amit -
Offline approval for line item based Shopping carts
Hi ,
We are planning to use offline approval and line item based approval (item based approval workflow) for shopping carts.
For e.g. 10 line items in a cart can have 10 different cost centres, and a line each need to go to respective cost centre managers for approval.
have few clarifications:
1. Can offline approval be used for item based shopping cart approval workflow?
2. Can different line items be sent by mail to different mail boxes?
3. Will 1 manager see all the 10 line items OR only the 1 line item for which he is responsible?
4. If he will get only line for which he is responsible , and once he clicks on approve , will this approval apply to his line item only , OR it will apply to all the 10 line items ?
Rgds
SumendraHi Sumedra,
Which workflow are you using - application or process contrlled workflow?
Assuming you are using process-controlled workflow - I will answer following questions -
1. Can offline approval be used for item based shopping cart approval workflow?
- Yes, it can be used !
2. Can different line items be sent by mail to different mail boxes?
Yes
3. Will 1 manager see all the 10 line items OR only the 1 line item for which he is responsible?
1 manager can 'see' all the items but he can only approve or reject the item that he is suppose to act on. All other item will be grayed out. However, this behaviour is configuarable !
4. If he will get only line for which he is responsible , and once he clicks on approve , will this approval apply to his line item only , OR it will apply to all the 10 line items ?
- see above
Regards,
Amit -
How to split a line item to 2 line item.
Hi all !
I have a request, help me please !
In system I have a invoice with 1 line item value 1000 USD.
Customer payment 600$. a incoming payment with value 600$ will post to system.
I want incoming payment and invoice will auto clear 600$ but system can't auto clearing because value is not Identical.
I want line item of invoice will split to 2 line item. Line item 1 value 600$ and line item 2 value 400$.
Line item 1 of invoice will auto clear with incoming payment and system will exist a invoice with 1 line item value 400$.
How to split a line item to 2 line item ? Have FM for split a line item to 2 line item in SAP ?
If you have other solution for this request, help me please !
Thanks !Hi,
Have a look at Split line item - Sales Order
Regards -
How to add new line item based on main item using crm_order_maintain
Hi All,
can you please provide a way to create a new line item based on main line item and save in crm transaction( in house repair order) by using crm_order_maintain(from SAP GUI).
Thanks,
vinod.Hi Vinod,
The relationship with main item is stored with CRMD_ORDERADM_I- Parent.
You need to pass the guid of main item to orderadm_i-parent. This will keep the relationship with main item.
Thanks
Ajay -
Splitting the Line items in Transaction LB02........
Hi Frnds,
I would like to know how to proceed further....afetr entering into standard transaction LB02, the user wants to split the line items depending on the quantity what he has enterd in the custom screen which i developed.
Here am able to get the data in background necessary to goto standard transaction. After entering into the standard transaction how to split the line items.
Functional Requirement
In the screen, which i developed...
The user enters material no...
-->Matl qty & matl desc will be displayed....
-->Then user enters the bin no. and the qty he wants to keep in that particular bin.
-->Here depending on the qty the user has entered it has to reflect in the Tcode LB02.
-->For example, total qty displayed in the custom screen after entering the matl no. is 20 From this qunatity, the user enters the quantity as 10 which is not GE to that qty (20) which we got from database.
-->Now this has to be replicated in the standard transaction in such a way that..the line items should also split according to the qty the user enters.......it may be upto n no. of line items.....and the bin no. should also be entered into the stnd Tcode LB02 at the unloading point field......
Thanks & Regards
Message was edited by:
Badri ThiriveedhiManaged to find an Enhancement Point in the Standard SAP Code and hence the Issue is resolved.
Thanks and Regards,
Venkat Phani Prasad Konduri -
Hi all ,
I have a requirement to Post Cash Journal Document using FBCJ tcode.
Is it possible multiple line items debit & single line item credit and different cost centers and different profit centers
for exp:
pk GL a/c description amount cost center profit center
40 400101 telephone exp 500 1403 P 1000
40 400101 telephone exp 100 1404 P 2000
50 200100 cash in hand 600-
This is My requirement is it possible in fbcj
Please suggest me.ASAP.
Regards
Naresh.Hi,
This you can do it in two ways:
1. Make three header under top level....one Product A, 2nd Product B ( as Billing element) and third as Common expense ( only cost). Now 1st & 2 nd WBS, you have to have sales order linking with individual lint item, for third you will accumulate all the common expense till the period end then make a reposting of the same in desired proportion to both products WBS hierarchy
(This is if you want to have a track on the common expense as well.......like planning, budgeting & control)
After this reposting, run RA for individual billing element and hence you will all the complement detailing and control over Revenue and expense with respect to Product A and Product B individually.
2. If you don't want to maintain that kind of detailing the common expense and keep track of it through project, then have cost centers accordingly and make an assesment/ distribution with respect to expenses accumulated at those cost centers for the period to the respective WBS under each product. Then execute the period end processes for the project.
Or
You can try with have two more line items in the costing sheet as an overhead against common expenses with respect each product.
I hope this should help you.
Regards
Avisek Bhardwaj -
Hi All,
I have line item based approval workflow WS14500015. My shopping cart has multiple line items each awaiting approval from multiple approvers.
Now my requirement is when any approver approves his line items , that particular line items should not be allowed for changes even though the shopping cart has status awaiting approval coz others line items are still awaiting approval .
Is this possible i.e user should be able to make changes to unapproved line items abut not approved line items .
Can i user badi BBP_WFL_SECURE_BADI for this ?? Please if anyone has already done this please share your inputs .
Thanks in advance
Iftekhar AlamHi Alam,
have you checked the APPROVAL_HISTORY_TABLE and ITEM_APPROVAL_HISTORY_TABLE? Here you will receive information on already approved items and the current approval process.
Kind regards,
Thomas -
Hi,
Some how our system is showing MIRO by GR line items.
Means, We have a PO with single line/single account assignment
We received 5 GR's for the same PO
When doing the MIRO, there are 5 line items were displaying corresponding to 5 GR's
I know that standard system will have cumulative single line in MIRO. But, what could be reason to display in MRO by GR lines??
Your input will be greatly appreciated.
Thanks,
Dev.Ramesh,
Excellant!!!
Regards,
Dev -
Documents has been posted with out line item
Hi,
Actully my user created GL Account with out line item he posted transactions into documents
Now we are not able to see the documents
T-CODE:FS10N
GL Account
Company code
Fiscal year
when ever click on amount not able to see the documents.
Please give me guide lines to solve this issue.
Thanks&Regards,
PrabhakarHi,
For secenario 2, you have to put below validation to achieve your requirement.
Cumulative add quantities of all the entries which are having status 'E' - GR for the combination of PO number and line item number.
Ex: PO no: xyz & two line items 01 and 02
In the EKBE table selection screen, give PO number and line item number. Then system will display all histery for that PO line item.
then collect all the entries which are having status 'E'. Now, we have only all GR entries ( 101 & 102)
Add quantities of all the entris which are having movemnt type 101 and 102 separately.
Substract sum with movement type1 from the sum wiyh movement ment type 102.
If result is zero, that means no GR posted. Total PO quantity open.
Then this case only, system should allow for chnages.
Regards
KRK -
COPA Realignments for line item based reports
Hi Guru
I built two CO-PA line item based reports in our environment. Now , there are some organizational changes in our environment and Now I have re-derive a characteristic from customer master data. Does those changes reflect in my line item based reports, If i run Re-Alignments (KEND)?
Thanks in advanceLine item reports (defined w/KE91) will reflect the realignment. Line item display (KE24/KE25) will give you the choice of reading the original posting or the realigned data.
-
Line-item based profitability report (CO-PA)
Hi SAP community,
when I run KE24 i can select the "Mode of access"
Read acc. to current structure ==> Realignment changes are included
Read as posted ==> Realignment changes are excluded
When I create a line-item based CO-PA report (KE91), do I have the same functionality, do either include or exclude realignments?
Thanks in advance,When I do a realignment and run a line item based report afterwards, the reports picks up the realigned value.
I havent seen any setting during the report setup where I could potentially define if the realigned or the original value should be picked.
So I assume SAP always selects the realigned values from the segment table in case of a line item based report -
Posting transaction with out line item :)
Hi Gurus
i was asked in an interview that" how to post a transaction with out line items ?" i told we cannot post...
can anybody share their views on it if yes how
Thanks in advance..
VickyHi,
in Profitcenter Accounting you can decide if you want to post with or without line items in the periodic transfer programs 1KE* (1KEK, 1KEH, 1KEI,...).
If you deactivate the flag for line items this would then only post total records, but no line items.
Best regards,
Andreas -
System bifurcated revenue on line item basis for different material in invo
Hi Friends
When i reaised a invoice for three material system showing three line item for the revenue in accounting document. Where revenue G/L is the same. As per my client requirement he want all revenue must posted in one line item in accounting document.
e.g line item posting key G/L amount
1 01 (Customer) XXXXXXXX 6000
2 50 (Revenue) ABCDEF -3000
3 50 (Revenue) ABCDEF -2000
4 50 (Revenue) ABCDEF -1000
Where as per requirement it must post to accounting document
line item posting key G/L amount
1 01 (Customer) XXXXXXXX 6000
2 50 (Revenue) ABCDEF -6000
Please help me to solve me the issue.
Regards
Shambhu SarkarHi Friends
When i reaised a invoice for three material system showing three line item for the revenue in accounting document. Where revenue G/L is the same. As per my client requirement he want all revenue must posted in one line item in accounting document.
e.g line item posting key G/L amount
1 01 (Customer) XXXXXXXX 6000
2 50 (Revenue) ABCDEF -3000
3 50 (Revenue) ABCDEF -2000
4 50 (Revenue) ABCDEF -1000
Where as per requirement it must post to accounting document
line item posting key G/L amount
1 01 (Customer) XXXXXXXX 6000
2 50 (Revenue) ABCDEF -6000
Please help me to solve me the issue.
Regards
Shambhu Sarkar
Maybe you are looking for
-
Best Way to Connect MacBook Pro (without Mini Display Port) to HDTV?
Hello, Although I am fairly confident that I know at least one answer to this question, I thought it would be best to pitch it to the members of Apple communities, just to see if there is a better way to get to where I need to go. I have a MacBook Pr
-
Hi Friends, I have created one userid and i want to give autharizations to acess only SUIM,SM50,PFCG, and i created one role as adding those T-codes but PFCG is not working remaining SUIM, SM50 is working for the userid. Thanks and Regards D
-
Subject line of email question
In a script the following is saving a file as Email Date then the date then the time. Instead of having the "name" Email Date I would like the subject of the email there. What is the command to put the subject line there? keystroke "Email Date " & sh
-
How do you change what your mouse looks like on the screen?
I would like to change how my mouse icon looks and how the it looks when something is loading. How do I do that?
-
Seeing the final SQL before it is executed
Hi, What is the best way to take a peek at the SQL in a model right before it is run? I am getting a "[java.sql.SQLException: ORA-00923: FROM keyword not found where expected" error, and I would like to track it down. Thanks, John