Mismatch in EBP and backend SAP system

Hi Experts,
When checking the status of the shopping carts we have found some shopping carts which has status as "Item in Transfer process" but PO has been created in the backend.
We are running the job for CLEAN_REQREQ_UP every hour and BBP_GET_STATUS_2 once daily.
Some shopping carts get their status updated as soon as they are ordered and follow on documents are created. While for a very few may be 2 or 3 shopping carts has a mismatch between their status.
Can anyone guide about the cycle and the programs which runs after shopping cart is approved, follow on documents are created and the status updated back to EB with follow on document information.
Thanks and Regards
Manoj

Hello Manoj,
this is the role of CLEAN_REQREQ_Up to check backend document creation and to update corresponding SC status by:
- inactivating "in Transfer process"
- activating "Follow on doc created"
- flinalizing backend references in BBP_BPBEI
To do so, the scheduled report is scanning table BBP_DOCUMENT_TAB.
This table should be empty (except for new entries added since last run).
Entries remaining in this table means errors. Corresponding errors should be found in Application monitors.
Those entries are flagged 'ERROR_ALERT'.
If you don't find any entry, you can re-create an manual entry for this SC, and next CLEAN_REQREQ_UP will align everything.
Check OSS around BBP_DOCUMENT_TAB, there are some anomalies arround management of those table entries.
Ex: A report has been created to re-create entries for GR (OSS 644963 Regenerating BBP_DOCUMENT_TAB entries).
For your case, there are also 4 reports to analyze and correct SC statuts/links errors:
649788 Shopping cart: Analysis/correction report Z_SC_STATUS_CHECK_1
728536 Shopping cart: Follow-on docs => analysis-/correction report
729967 Shoppng cart:Status I1111,no follow-on docs->analysis report
757625 Incorrect Status I1112->analysis report
755769 Status I1113, no item or header relations->analysis report
Rgds
Christophe

Similar Messages

Connect b/w SAP and Non SAP -system

Hi All,
I have a requirement where i need to connect between a SAP system and Non-Sap System.
the front end is an E-Build tool (for construction Industry) from where the user will pick the data and the data should get store at the backend i.e in the SAP system.
E-build is a tool for construction industry with lots of flexible options for the user to check for their house, along with their prices.
These all data needs to be captured and store at the backend.
Can any one suggest me which method shall i go for this in ABAP(and How) or need to go for the XI-Netweaver or EP technology.
Thanks & Regards
Mona

you better to go for middleware tools . keep files( whichs contains data to be stored in SAP) in one folder at 3p systems and middleware adapters will pick that filles automatically and sent it to Application server or then process the data into SAP.
tks.. venkat

Idoc b/w sap(r/3) and non sap system .

hi gurus,
how i pass an outbound idoc b/w sap(r/3) and non sap system .
which function module we will use in this scenerio for inbound and outbound idoc both
please guide me with an example .

Hi Pawan,
Non SAP system should have RFC adapter in order to receive and send Idocs from/to SAP.
If this is not your case, you should us a Integrator Middelware with RFC and standard adapters like SAP Exchange Infrastructure.
If for example, your non SAP system is able to process data from flat files you can build next interface: SAP send Idocs to middleware that receive them using RFC adapter, middelware maps Idocs into flat file and send it to a one of non SAP system folder using FTP adapter. Non sap system triggers the flat file into its applications.
Reward points if useful.
Roger

Interface b/w SAP and NON SAP system

Hi GEMS,
Please give me some suggestion .My requirement is i have to transfer data from sap system to non sap system.
There is no middleware between these systems.The data will be in the xml format.
Please help me regarding these how can we link these systems and transfer data
Best Regards,
Phani

Please let us us know the platform of the non-sap system such as JAVA/.Net. It's can be done using PI/XI.
As per my experience, I've worked with only SAP JCO and .NET connectors. These connectors can be downloaded from service marketplace and needs to be installed on the non SAP platform. The Data transfer can be done through RFCs, which will be called from the non-sap systems.
Also, the data needs to be in XML format. XML transformations can be created using transaction XSLT_TOOL to convert the ABAP data to XML and viceversa. The generated XML string can be passed to non SAP system through RFC from SAP.
If the process is not synchronous, another option can be dumping the SAP data to FTP, which will be used by the non-sap system whenever required.

Regarding the Service Registry in SAP PI 7.1 and non SAP System ....!

Hi All ,
I need to know answers for the below Question ...hope to get some answers frm Experts ....
1) How to publish service from non-SAP systems?
2) How to use discovered service in the Service Registry for consumer/provider scenario? With some examples.
Thanks in Advace ...!
Regards ,
Aziz khan .
Edited by: Aziz khan on Sep 16, 2009 11:43 AM

Hi,
1) How to publish service from non-SAP systems?
Publish Service is nothing but making WSDL of that service available. For that you need to Publish the WSDL of the web Service to UDDI. For Non SAP system, Lik .net , Java they have there oun APIs to do so. U can search on net to get it.
For Ex. below link.
http://www.startvbdotnet.com/web/publish.aspx
2) How to use discovered service in the Service Registry for consumer/provider scenario? With some examples.
Once you discover the services, you get the WSDL of that Service. Then You can import this WSDL in IR and you it.
See the below links.
http://help.sap.com/saphelp_nw04/helpdata/en/43/ce993b45cb0a85e10000000a1553f6/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/EN/26/9e97b0f525d743882936c2d6f375c7/frameset.htm
Shweta

Intigrating SAP and Non-SAP system for recruitment process

Hi All,
Our Client has a requirement which is related to Recruitment.The requirement is that the employee resumes ,photos and credentils are stored in legacy system.The shortlisted resumes sud be transferred into SAP and the hiring process sud be done in SAP.After the hiring process , the status of the applicants sud be triggered in the legacy system and not in the SAP system.
Is there any Standard BAPI's for this requirement. Any Workflow is involved in this requirement.
As a HR Abaper i need to give the complete technical details for this requirement. Pls advice me on this .This is very urjent.
Points will be awarded.
Many Thanks,
Chakradhar Maddina

what is this 3rd party application?
if anyways they are using SAP for masterdata, why dont they use the same for applicant data?
ok for whatever the reason they have decided that..only way looks like is to do it manually,
create a bdc/lsmw for the hiring process and let them use it regularly for hiring all the selected applicants in a single go.
as for updating their system with the updated status, again i think they should do it manually.or maybe if their legacy system allows mass data update/chages.
becoz you do the creation of BDC/LSMW only once not everytime you want to hire.. i think its an easir process. also wait for other experts to give their feed back you may get some valuable info.
hope it helps

Difference btw: Distributed, High-Availability and Additional SAP System Instances

Hello,
In the installation Doc for NW 741, there is 3 other installations scenarios beside the single instance, can you pl. highlight the difference?
Cheers,
F

Hello Fouad,
Distributed landscape:
In distributed landscape, every instance can run on a separate host
- Central services instance for ABAP ( ASCS)
- Enqueue replication server instance (ERS instance ) for ASCS instance
- Database instance
- Primary application server instance (PAS)
High availability :
In high availability ,all above instances can run on seperate host. Here you can run all instance in switchover cluster infrastructure. That means ,for any instance if one node in cluster fails ,it switch over to other other node and still operations can run without any distrubance.
Additional SAP instance:
Additional SAP aaplication instance can be installed to scale the performance of an SAP system. It can be installed on one of the above instance host or on differnt host.
The term "additional application server instance "was introduced to replace term dialog instance from SAP Netweaver 7.1 and higher.
For more and detailed information ,you can refer to Installation guide for the SAP release you are planning to install and for DB/OS combination.
Hope this helps.
Regards,
Archana

How to copy role from R/3 to BW and other SAP systems

hello all,
I have created a role in R/3 dev systems, Now the requirement is I have to create same role in BW, GTS etc
Is there a way I can copy or transport the request from R/3 dev to other SAP systems. I am asking this becuase this role is kinda messy with lot of auth objects and it will take me lot of time to create it fresh in other systems.
Thanks in advance

You can transport the role ur use download/upload. You reach all of these function in the menu on the entry screen of transaction PFCG.
Kind regards
Frank Buchholz

Starting and Stopping SAP Systems and Instances on Windows

Is there a way to automatically stop/start instances on windows at boot time?
I don't want to have to logon after a reboot and go into the mmc and start the app manually.
Thanks,
Dan

Dan ,
As Juan said it could cause problems while starting SAP at startup.
Still if you really want to implement this...
This is what I have found ... I never tried this but hope this should work.
1. you must make sure that SAP[SID]_00 service is set to start automatically.
2. you must edit your SAP START profile and add this line:
Autostart=1
3. make sure that the line you added IS NOT the last one in your file. if it is, your added parameter could be ignored.
to test this out, shutdown SAP and your database, then shutdown the SAP[SID]_00 service. now start it. open SAPMMC to see if you see any starting activity. it should work fine.
Let us know if it works.

Archiving Information from "old" SAP systems and switch off the server

Good day
I hope someone can offer some advice. Our company has a few sites across the globe. Three of the sites in South Africa ( where I'm working at the moment ) had their own SAP systems. Three odd years ago, we implementeted a new SAP system, combining the separate SAP systems into the new one, running of the same box etc etc. The "old" SAP systems were still availbale after the new one went live, in the event that people want to look back at history.
We are you busy with a project where we are going to merge our current SAP implementation into our global SAP system... obviously only the current master data are going to be transfered to the new system. It's an idea time for us to clean up our data.
My question: Once we go live on our global SAP system, we want to "export" or archive from the 3 "old" SAP systems the Master Data from the HR module ( like employees who's left the company - it's law to keep the records for 5 years at least once a employee has left) , HSEC and FI modules into a single datastore... this way we don't have to keep the three servers running in the event that history is required. The servers wil be kept off-line and only switched back on if a detailed audit is required.
The global SAP system does not have an archive solution implemented to we can't access archived data from the new system...
So, we need to export master data from our 3 old SAP boxes into a Unicode type file system, and our local South African sites needs to be able to access the information using a text type editor or a web based interface we can run off our SAP Portal...
Thank you

Hello Cornelius,
To introduce myself, I am an active SDN/BPX member as well as an ASUG Archiving and Information Lifecycle Management Volunteer.
Decommissioning Legacy Systems (SAP and non-SAP systems) is quite the topic these days with divestitures becoming such a common occurrence.
Some things to think about in this situation are:
Identifying the data to be decommissioned:
what information would be needed for an audit
what information would be needed for a lawsuit situation
Identifying the access requirements to this data.
Identifying the retention policies for this data (this will be
driven by regulatory requirements, etc.).
If this has not already been done - define retention periods for this data - it will most likely have different retention periods based on the type of data.
You mention that you do not have an archive solution in place yet.
I would recommend that you may want to research that option because typical requirements for retaining legacy data is that it is stored in such a manner so that it is protected from any type of modification.
There are a lot of 3rd party archiving/storage solutions that provide this type of secure storage.
You are correct in that you will want to export or archive the legacy data as opposed to loading the data into your current system. It would probably involve a large increase in the size of your SAP database and you would probably run into number range overlaps.
But, if this data is exported to a filesystem, you will be losing the business logic associated with the data, and the information is no longer in its original format (this could have legal ramifications).
I would recommend using SAP Archiving functionality for this effort. If you are looking for outside resources, there are many vendors out there that have a lot of experience with these types of projects.
Two that come to mind are Dolphin IT and OpenText.
Or, depending on the timeline of your project, SAP is coming out with a tool that can be used for decommissioning SAP Systems. It is part of
their SAP ILM solution. It will be called Retention Warehouse. Here is a paragraph from their latest white paper describing this new tool:
With the retention warehouse, SAP now offers a
standardized method for system decommissioning in
answer to these pressing issues. It allows you to reuse the archived data outside the original system in a central
retention warehouse.
For more detail on this topic, the white paper can be found on the SAP ILM Website:
service.sap.com/ilm
This tool is part of a larger initiative from SAP to help customers with their ILM (Information Lifecycle Management) strategy. This tool is near and dear to me as I was fortunate enough to be part of an
ASUG Influence Council that helped with some of the requirements for this solution.
I hope this information is useful.
Good luck and Best Regards,
Karin Tillotson

To and fro communication between mobile & sap system

Hi,
I want to enable a function in basis system in which on locking the sap userid, user will send an sms (using mobile) to sap system (ecc 6.0). Syetem will authenticate the request and will revert as sms to same user on mobile either success with unlocking the userid and resetting the password or authentication failure message.
Is this possible to send and receive such kind of sms to and from sap system?
If yes is it possible for system to read the input data and trigger the unlock command with password reset?
please advice.
Thanks.
- Gaurav

Hi Gaurav,
Your requirement seems interesting.
1. An SAP system uses SAPconnect and the HTTP plug-in to communicate with a paging provider that forwards SMS messages.
see this too: http://help.sap.com/saphelp_nw2004s/helpdata/en/2b/d925bf4b8a11d1894c0000e8323c4f/frameset.htm
2. MESSAGEmanager SAP is a comprehensive SAP certified document delivery solution that
provides an easy-to-use and seamless connection to fax, email and SMS for R/3
applications.
check this: http://www.xcellerateit.com/whitepapers/syssol/spec_sap.pdf
Though i have not done this myself, the above may help you build an idea.
Also, post your experiences; so that it will be usefull for people on forum.
Regards
Divya

How to make interconnection between a legacy system and SAP system?

Hi Group,
I have a query on the interconnectivity between a legacy system( non-SAP ) and an SAP system.
The legacy provides data in the form of Files only.
my queries are as under:
1)
how can I make a connection to the Legacy from my SAP system?
2)
what are the different ways by which I can connect these 2 different systems?
3)
I hope there might be a chance of connecting the systems by way of using webservices, in this case what are the things I need to follow inorder to make the connection and get the data from legacy?
please provide me with necessary info on these queries to proceed further.
thanks in advance.
Regards,
Vishnu.

Hi,
U can use the GUI function m modules to fetch the data from legacy systems.
Also With the help of Remote FMs u can get connected to the SAP backgrounds from NON SAP background like Portal.XI is an interfacing tool used to connect 2 SAP or SAP to non SAP medium.
Regards,
Ajit.

Automatic start and Stop the SAP System

Hi experts,
We want to deploy the unattended/Scheduled Start SAP and stop SAP in IBM i series. How to do it? I have tried with WRKJOBSCDE and putted the command STOPSAP or STARTSAP but after finishing the job, now result. But when I simply put command STOPSAP/STARTSAP it works(start and stop sap system).
How to deploy it?
Thanks
Asad

Hi Ken,
yes, that is correct, but in the meantime, it is **** easier ;-)
As SAPHostAgent starts automatically, it is just needed in the default profile:
Autostart = 1
This is a really nice new feature ;-))
Regards,
Volker Gueldenpfennig, consolut international ag

Web dispatcher url Rewritting to several sap systems

Hello SAP NW Community,
we need a reverse Proxy to achieve application of different SAP System via Internet. We desided to use web Dispatcher.
The host names of sap systems should not be visible, because of this we create the following URL Rewritting rules.
For example:
AAA, BBB and CCC are sap System SIDs;
"wdisp.company.com" is the FQDN fron webdispatcher
The "icm_filter" Looks like this:
if% {HTTP_HOST} RegIMatch "wdisp.company.com"[and]
If% {PATH} RegIMatch "AAA"
RegIRewriteUrl ^/AAA/(.*) /$1 [noescape]
SetHeader x-sap-webDisp-target-sid AAA [break]
the next rules are the same but for BBB and CCC.
The idea is to rewrite in background all URLs such as:
http(s)://wdisp.company.com/AAA/...
to :
http(s)://<FQDN from AAA>/...
The result is always the same: the rewritting for AAA works fine but for BBB and CCC we get -http error 404.
The results are independent from web browser(IE or Firefox).
The http trace Tools- HttpWatch Basis or Firebug show also no rewritting for BBB und CCC.
According the documentation is web Dispatcher able to support many "stateful" and "stateless" connection to different backend sap System.
Do you have any ideas why the rewritting works only for the first sap System?
We tested with different browser and Browser sessions but the resul was the same.
BR,
Rumen

Hi,
Instead of PATH , use different pots like this, you can get the URL redirection,
icm_filter.txt :
if %{HTTP_HOST} regimatch wdhost.company.com*
SetHeader x-sap-webdisp-target-sid AAA [break]
if %{HTTP_HOST} regimatch wdhost.company.com*
SetHeader x-sap-webdisp-target-sid BBB [break]
if %{HTTP_HOST} regimatch wdhost.company.com*
SetHeader x-sap-webdisp-target-sid CCC [break]
In Instance profile :
wdisp/system_0 = SID=AAA,MSHOST= AAA.HostNane ,MSPORT=8111
wdisp/system_1 = SID=BBB,MSHOST= BBB.Hostname ,MSPORT=8100
wdisp/system_2 = SID=CCC,MSHOST= CCC.Hostname ,MSPORT=8101
URL :
http://wdhost.company.com:8111 --- goes to AAAhost and so on.
regards
Vagesan

Exposing SAP systems directly through Portal

Hello All,
If we expose the SAP systems directly through the Portal by creating transaction iviews, Are there any security lapses. I could see a great advantage of users having the internet enabled usage of SAP systems of their organisation.
Is this a recommended approach for an organization who doesnot any external users to the organisation and have only just internal users.
Thanks in adavnce.
Regards,
Kalyan.

> Is this a recommended approach for an organization
> who doesnot any external users to the organisation
> and have only just internal users.
Yes, because to create transaction iviews you also need to specify the system object representing the backend sap system which has a property called Logon Method which can be either "User Mapping" or "Logon Tickets".
In either case you have to map a portal user to the backend user.
So only if a portal user also has some mapping done by means of Logon ticket/User mapping to the backend system can he/she see the transaction.
P.S. Do let me know if you need more help.

Mismatch in EBP and backend SAP system

Similar Messages

Maybe you are looking for