Missed get delta once option in dtp and transported to prod

hi all
we have transported DTP for our infocube 0wbs_c11 into production.
This infocube 0wbs_c11 is loaded from 4 datasources of which one datasource supports delta and rest donot.
so in process chains we are using the option for delete overlapping requests. for all the 3 datasources which doesnot support delta.
But for one of these 3 datasources we have transported DTP without ticking GET DELTA ONCE OPTION AND loaded to infocube.
now we should tick the get delta once option and transport it to production, where we already ran this dtp once.
Since we cannot enable the get delta once option enabled in dtp after the first dtp run
my question is should i delete the request from infocube and transport the dtp transport request (to prod )with getdelta once option ticked and run the dtp again will it work.
or do i need to delete the request as well as dtp from prod and then transport the new request with delta once option ticked.
regards
krishna

based on the above link which says after activating transformations using the program rsdg_trfn_activate if we run process chain the dtp's get activated by itself
i have done a trial based on the above point
i went to dtp execute tab and press execute ,and when it asks me for furthur process
YES NO CANCEL
I have cancelled the execution of dtp.
and now when i refresh the tree the dtp is seen active .
i followe the same for all.
regards
Edited by: krishnav3.5 on Sep 16, 2011 4:17 PM

Similar Messages

Get delta once option - DTP process

Hi ,
we are testing the new BI7 system and the DTP process and while checking for the different options in the DTP we came across the Check box option " Get delta once " option while we went through the F1 help but not of any use , please through light on how and when this option is used.
Thanks and Regards
Munin Reddy

check this thread for more info:
Only get delta once- SPS 8
KJ!!!
Message was edited by: KJ (Kamaljeet)

DTP Indicator Only Get Delta Once: How to handle deleted records in source

Hi colleagues,
I have checked some messages and blogs, but could not find any solution for deleted records in source system.
My source system is not able to delivere delta for my table of interest. So I checked "Only Get Delta Once" in my DTP and made some tests.
It works very well for changes of existing records of the source table.
But, SAP help on this features wirtes:
...If this is not logically possible because, for example, data is deleted in the source without delivering reverse records, you can set this indicator and perform ...
I checked this feature by selecting less data from source at the second load from the same table. But recordmode does not get an deletion flag for the now missing records. So, the indicator "Only Get Delta Once" does not work like BI standard delta mechanism?
What is wrong?
Thanks and regards,
Wolfgang

Hi,
If you select the option 'Only get delta once', then every request in the PSA will only be loaded into the Data target once. For example. If you load a full request into the PSA through an InfoPackage and then load it to the Cube. In a snapshot scenario, when the new full load comes to the PSA you will need to delete the previous request from the cube before loading the new request.
But if you delete the previous request from the cube, and not from the PSA - and if you haven't checked the 'Only get delta once' flag, when you execute the DTP, it will load both previous and the new requests from the PSA to the cube. In order to avoid this you have 2 options:
1. You can delete a request from the PSA after every successful load into the Cube OR
2. You can check the 'Only get delta once' flag in the DTP so that it won't load any request it has loaded into the cubes previously even if it was deleted from the cube.
Using the second option de-couples the PSA maintenance from your regular data loading and also saves you an additional step of deleting the PSA request in your process chain.

"Only Get Delta Once" - How to use this correctly?

Hi folks,
we are currently facing the following situation:
We have a data source only being able to deliver full update.
That's why we proceed as follows:
1.) Full-Load with Infopackage to PSA
2.) Delta-Load with DTP from PSA to first-level-DSO (write-optimized)
3.) Delta-Load with DTP from first-level-DSO to second-level-DSO (standard-DSO). As the activation aggregates all duplicate entries, we are therefore able to deliver a delta to all following data targets (e.g. infocubes)
What we are now wondering about how to use the flag "Only Get Delta Once" which is available in all Delta-DTPs. The help explains it should be used when creating snapshot-scenarios like ours as each request is only delivered once, even if it gets deleted in the data target.
But what other benefit would we have when setting this flag? As I mentioned, the snapshot-scenario also works without this flag...
Could anyone perhaps provide me some more details about this flag and where it should be used?
Thanks & regards
bivision

Hi,
If you select the option 'Only get delta once', then every request in the PSA will only be loaded into the Data target once. For example. If you load a full request into the PSA through an InfoPackage and then load it to the Cube. In a snapshot scenario, when the new full load comes to the PSA you will need to delete the previous request from the cube before loading the new request.
But if you delete the previous request from the cube, and not from the PSA - and if you haven't checked the 'Only get delta once' flag, when you execute the DTP, it will load both previous and the new requests from the PSA to the cube. In order to avoid this you have 2 options:
1. You can delete a request from the PSA after every successful load into the Cube OR
2. You can check the 'Only get delta once' flag in the DTP so that it won't load any request it has loaded into the cubes previously even if it was deleted from the cube.
Using the second option de-couples the PSA maintenance from your regular data loading and also saves you an additional step of deleting the PSA request in your process chain.

QA Testing and transport to PROD

Can anyone explain in detail the steps involved in QA testing till transport to PROD.
objects are : new report , new table , zFM
Is there anything specific to be done in QA for new tables.Or it can simply be transported.
Is there anything to be done after transport to PROD.
what all should be done in QA Testing?pls explain with terms involved(variants etc.)
Thanks a lot in advance.

for report and FM nothing specific...
for Tables... first the request of the structure need to be moved and then the table contents... else the other way... the transport will fails..

Not getting "save as" option in numbers and pages

All my templates are appearing as "locked" and when I unlock them I cannot save the amended template as a new file name?

Try Tim Stollery's fix:
https://discussions.apple.com/message/11088237#11088237
This resolved my problem.

Error "Overlapping selection criteria with DTP" when transporting DTP

When transporting a DTP from Dev to QA I get the following error in the trasnport log:
Overlapping selection criteria with DTP DTP_4APJZSGKYQLUQYBCDBWK707JO
Message no. RSBK019
Diagnosis
The selection criteria for the DTP to be activated overlap with the selection criteria of DTP DTP_4APJZSGKYQLUQYBCDBWK707JO in field , for example, with regard to value . Delta transfer from a source object to a target object is only allowed to transfer each record oncce. However, this cannot be guaranteed if two DTPs have overlapping selection criteria with the 'Delta' extraction mode.
System Response
You cannot activate the DTP with the current selection criteria.
Procedure
Restrict the selection criteria so that they do not overlap with the selection criteria for DTP DTP_4APJZSGKYQLUQYBCDBWK707JO.
The DTP is a delta process which loads data from one infocube into an DSO. I understand that the error is that it is transporting the Delta parameters (something similar to a Delta initialization of infopackages I suppose) but I don´t how to access the information of the delta (selection criteria) of a DTP.
Any suggestions? or similar experiences?
Thanks in advance
nicolá

Hello,
You can modify a parameter to create and modify dtp in Production. Like normally is done with Infopackages. There is no reason to make the changes in Dev in the Infopackages and DTP, and transport to Production. This transports normally cause that kind of errors because the id's are different in Dev, QA and Prod, and it is difficult to change dtp in that way.
To change the parameter do like this:
Execute Trx. RSA1 -> Transport Connection -> Tab Object Changeability -> Change DTPA to Everything Changeable.
Do this in Dev, QA and Prod.
Regards,
Jorge Diogo

How to collect and transport a hierrachy linked to an object ?

Hi guru,
I am working in BI 7.0 and linked a Hierarchy to oan object.
When I transported the object to production, the hierarchy is missing in production.
How to collect and transport this hierachy ?
In case of a user-defined hierarchy, is it possible to transport it or have I to re-create in prod ?
Thanks for your support

hi ,
Yes we can create hierarchy in production .
But if you have some kind of infrastructure build for data laod , that needs to be separately migrated.
The Info-object with the Hierarchy check in maintaineance window of info-object should be migrated to production in order to naually maintain the hierarchy in Production
Thanks
Mukesh

I once created an account and changed meanwhile my Apple ID. Now, when trying to log in to iCloud, I get the message: "You are already logged in". I cannot get access to the account in the way, that, for example, the options appear on the right hand side.

I once created an account and changed meanwhile my Apple ID. Now, when trying to log in to iCloud, I get the message: "You are already logged in". I cannot get access to the account in the way, that, for example, the options appear on the right hand side.
What can I do?

Thank you, pvonk, but:
To be more precise: I am talking about the logging-in within the System Preferences on my iMac.
When trying to log in with the old ID, I get no access, i.e. it says "Try again"...-Trying the same with the new one gives me the result I mentioned in my first question...
Now I found out how to do it: I had to erase all accounts-then I could sign in with my Apple-ID. Thanks again.

I no longer can get "Tools" or "Options" at the top of my screen. Google and Yahoo toolbars dominate the entire top of the screen. I want to get rid of them and go backk to a regular screen shot. How???

I can no longer get "Tools" or "Options" at the top of my screen. Google and Yahoo toolbars dominate the entire top of the screen. I want to get rid of them and go back to an original screen shot. How?

'''Can't see the Menu Bar''' (File, Edit, View, History, Bookmarks, Tools, Help)?
Turning the Menu Bar on and off is a new feature in version 3.6.
''(~~red:Linux & OSX see~~: [[Menu bar is missing]] )''
''Windows'' Method 1. '''''Hold down''''' the key and press the following letters in this exact order: V T M then release the key
''Windows'' Method 2. Tap once on the F10 key, while the Menu bar is visible, choose "View > Toolbars", click "Menu Bar" so that a check mark is placed next to Menu Bar
''Windows'' Method 3. Tap once and release the key. The Menu Bar will be displayed; then choose ~~red:V~~iew > ~~red:T~~oolbars and click on ~~red:M~~enu Bar so that a check mark is placed next to Menu Bar
The Menu Bar should now be displayed permanently, unless you turn it off again using View > Toolbars. Check mark = displayed, NO check mark = not displayed.
See:
http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
http://kb.mozillazine.org/Toolbar_customization#Restoring_missing_menu_or_other_toolbars
'''Navigation Toolbar, Bookmarks Toolbar and other Toolbars''' under View > Toolbars. Clicking on one of them will place a check mark (display) or remove the check mark (not displayed).
'''To display the Status Bar''', View, then click Status bar to place a check mark (display) or remove the check mark (not displayed).
'''Full Screen mode'''
http://kb.mozillazine.org/Netbooks#Full_screen
Also see:
''' [[Back and forward or other toolbar buttons are missing]]'''
'''[[Navigation Toolbar items]]'''
'''[http://support.mozilla.com/en-US/kb/How+to+customize+the+toolbar How to customize the toolbar]'''

Using the paste options randomly misses out text, don't use it and use the 'Paste Special...' option instead (MS Outlook)

Also there seems to be no obvious way to report Office bugs. This is leaving little room for improvement. Not sure if there has been any planning on this front???
For example, [MS Outlook] using the paste options randomly misses out text, (don't use it and use the 'Paste Special...' option instead). But how do I communicate this to the Office team without knowing at least one of the team personally (which I
don't)???

Hi,
Do you have this issue when pasting in other programs?
If you are pasting something into Outlook, some formats and images may get lost, especially when you choose the Paste Options as Keep Text Only.
Once you have this issue again, please try with "Keep Source Formatting". This may keep the Sour Formatting and you may not get the text lost.
If you have any feedback when using our products, I suggest you press Ctrl + Alt + 7 or Ctrl + Alt + 8 to submit it. Microsoft will always listen to users' voice and make the products better and easier to use.
Regards,
Melon Chen
TechNet Community Support

When plugging in my iPhone to my PC, I get message "The registry settings used by Itunes drivers for importing and burning CD'd and DVD's are missing..." Can I uninstall and reinstall the iTunes app without losing all the tunes I've purchased/loaded?

When plugging in my iPhone to my PC, I get message "The registry settings used by Itunes drivers for importing and burning CD'd and DVD's are missing..." Can I uninstall and reinstall the iTunes app without losing all the tunes I've purchased/loaded

many thanks.
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

When I publish my site on one specific page where i've added {tag_pagecontent} I get the error:Some files on the server may be missing or incorrect. Clear browser cache and try again. If the problem persists please contact website author.

When I publish my site on one specific page where I've added {tag_pagecontent} I get the error:
'Some files on the server may be missing or incorrect. Clear browser cache and try again. If the problem persists please contact website author.'
I'm trying to get a blog module going, I've even deleted the html insert bog with the tag in and re-published which then I don't get the error but as a result no blog either. But then I add the tag in again and publish the error comes back. I've used the dev console and it says that my musicians sample.css is out of date but why is it only out of date when I add in html to my muse site?
HELP!!!! I've searched other threads and to no avail I'm publishing so no direct ftp going on. the only thing I changed in business catalyst was the module stylesheet in order to style the blog. I've tried uploading and replacing all files nothing seems to work. the site is here:
http://www.musicstudentsforhire.co.uk/musicians-samples.html
It's only this page as it has the blog on. Also I've noticed when I've re-published occasionally it will show the mobile version on my desktop and not the desktop version??? no idea why that's happening so I've had to turn that off. any explanation on why that is happening would also be much appreciated.

I haven't received an answer as of yet, I'll post t on here when I do. I de-activated the mobile site because it's my clients site so he needs it to be operational during the day. I hope someone gives me an answer soon.

How do I get more than one signature option in Fill and sign?

How do I get more than one signature option in Fill and sign?

Hi,
Are you trying to place more than one signature on a PDF document?
Please explain the workflow.
Regards,
Anand

My ITunes got corrupted and I kept getting a message when updating iTunes64msi missing so I uninstalled all files and I thought I removed all registry values but when reinstalling I get an older version is installed and cannot be removed. I need a soluti

My ITunes got corrupted and I kept getting a message when updating iTunes64msi missing so I uninstalled all files and I thought I removed all registry values but when reinstalling I get an older version is installed and cannot be removed. I need a solution.

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Missed get delta once option in dtp and transported to prod

Similar Messages

Maybe you are looking for