Missing authorization check to display master data error..

Hi,
We are in SRM7.0.
After adding content in my shopping cart, I am trying to change the Account Assignment in the Item Details from Network to Cost Center or GL Account.
Under Item Overview, after changing the Account Assignment to Cost Center, I go to "Assign Number" to add a Cost center..On clicking the matchcode search box,  I get selection entries like Cost Center, Controlling area etc..If I click on the Search box without keying anything, I get a "Missing authorization check to display master data error".
I get the same error, when I try to select Assets under Account Assignment area and use search under Assign number. I dont get any errors on searching networks.
Am we missing any authorization check in the backend ?
Regards,
Rajan.K

Hello Rajan,
You could use transaction ST01 in SRM to perform some 'authorisation' trace.
It might give you some pointers to the issue.
Regards,
Franz

Similar Messages

  • Authorization check for Vendor Master Data

    Hi,
    I have a requirement where I want to restrict some of the end users in viewing accounting data of vendors. In XK02/XK03 there is a sub screen for Company code data (Accounting info/Payment trans./with holding tax). I want to put a check for the selection of these check-box. System should allow some of the users to view these data. I tried for exit/BAdis , but didn't find anything as per my requirement. Please give some suggestions.
    Thanks & Regards
    DR

    Hi
    Check BADI ADDRESS_SUBSCREEN, I think you can implement this one and add a authority check here.
    check the method ADDR_APPL_SUB_PAI_IMPORT
    Regards,
    Himanshu

  • 0PLANT_ATTR Master Data error

    Hi Experts
    I have an issue loading 0PLANT_ATTR master data. 
    Some records in PSA are ok but the others give the error:
    'No local currency found for plant 1601 and sales organization 1720'
    I have made the correct steps when loading (a) Company code master data, b) Sales organization master, data, c) Plant master data).
    I have check the 0SALESORG master data, and the currency 'BRL' for the sales organization '1720' exists in TCURR table  - recently transfer gloabal settings/currecy again -.
    I see this issue several times in the forum but not one give the solution!
    Could somebody help me please?
    Thank you in advance!!

    Hi,
    Have you checked note 750322. Look at the 3rd point in it.
    regards,
    Murali.

  • Some segments are missing in the idocs for master data zdebmas

    hi guru's,
    can any one hlep me here we facing the probelumm
    some segments are missing in the idocs for master data zdebmas
    , there is some issue on the generation of the Site Master IDoc (Message type: ZDEBMAS, Basic type: DEBMAS06).
    This is using the SAP standard program (RBDMIDOC) which reads the Site master change pointers.
    There is  some segments below is missing in the IDoc:
    how to chcek this probelumm...

    hi
    i got the function module. it is  triggerig whne i do changepointer running.
    what ever changes i made only that segments are onlycomming in to the idoc. but remaing segments are not comming.
    my req is to show all segments  even if i do changes in one segmet fields  dont change theay have send to the interfece all athe segments.i ahve to do some enhancemetns for that
    can u plse help me the login  or any function module which will fill the alla the segmetns .

  • Vendor master data error - check issue manueal

    Hi all,
    i got the following message when i create vendor master data, same message as error when i try to post manual check.
    " Changes for vendor 500011 not yet confirmed
    Diagnosis
    The change to sensitive fields of vendor 500011 have not been confirmed yet.
    Procedure
    You can confirm the change with transaction FK08."
    could any one give me the solution ple
    thanking you

    Dear,
    If the "sensitive field for dual control(vendor) " is defing in IMG under "preparations for creating vendor master data, then when you creating the vendor master data, the confirm is necessary. the responsible person could help you to confirm it via FK08.
    With Best Regards,
    Gladys Xing

  • Master data error - when switching an attribute to navigable

    Hi,
    I have a serious problem on a master data. I have this master data that until yesterday did have not a problem.
    Now, when I add an attribute not navigable (DIS), no problem. When I switch to DISPLAY and activate, following error occurs:
    Error in activating the InfoObjects
    Characteristic 0FS_CTR_NO: The attibutes SID table(s) could not be filled
    Error in BW:
    Error when activating InfoObject 0FS_CTR_NO
    Characteristic 0FS_CTR_NO: Error when generating master data routines
    Error when resetting InfoObject 0FS_CTR_NO to the active version
    I tried to make this modification also directly in Quality without transport, and the error is the same.
    Master data is empty, so I cannot understand why there is a problem with SIDS.
    Any suggestions?
    Thanks,
    Gianluca

    Hi,
    as Raj said,  when infoobject attribute is changed from dispaly attribute to navigational attribute there will be impact.
    check this thread.
    Link: [Error when activating 0MATERIAL after adding Navigation attribute]
    Regards
    Daya Sagar

  • Gl account master data error

    Hello
    I am working on BI7. We have loaded master data to 0GLACCOUNT. the datasource is delta enabled. Now it has a compounded char CHAR OF ACCOUNTS.the length of the char which have been given is 10.
    We are getting an error in the display of the Gl account data.For the master data where gl account is like CD38. When maintaining the master data we are getttng data as CD38 as well as 3000CD38 where 3000 is the chart of account.
    Now i am not able to find out why is it showing like 3000CD38.i have checked all the loads done before and there has not been any record updated as 3000CD38.
    Please can someone assist me..urgent issue...
    thanks

    Hello,
    If you say you see this value i report then it should be present in the cube on which the report is based.
    I hope the report is based only on one cube. If so then if the value is not present in the cube the record is actually not bound to show up. You need to check the contents of the cube from the manage tab - > contents -> infocube contents.
    Also If the report is based on multiprovider and you have some other infoproviders check all the infoproviders that have been used. if the multiprovider is using the master infoobject itself then we need to think of another proobable solution (but i dont see that it will be included in the report).
    Also if you are authorized to modify the query then you can add one char in row and find from which infoprovider actually the reocrd is coming. the you can remove the infobject.
    The infoobject you can find under data padkage -> infoprovider (0INFOPROV)
    Regds,
    Shashank

  • Payroll period does not correspond to master data error in INLK run & soln

    Dear All,
    Just wanted to share this Issue and solution which i found after debugging.
    I am not sure it is 100% correct.
    I am working on indian payroll and was doing lagacy data transfer with INLK schema
    i was used to get error '2 payroll period does not correspond to master data'
    and this was for only new joinees in that period .what i found out after debugging is
    for e.g. employee is hired in 03.06.2011 .and record in t558b is
    90300035 1  2011    1 2011 3 01.06.2011 31.06.2011
    where 01.06.2011 is a for period begin date ,
    now in payroll program this is being checked with joining date in following subroutine check_aper_versus_t558b
    so it ends up with above error.now if i go and change 01.06.2011 to 03.06.2011 in T558B then payroll will be successful.
    I dont no whether this is right approach but this removed that error.Just wanted to share so
    It might help the members.

    la diferencia es la fecha del campo FPBEG que debe ser la fecha para los empleados que no esten con el año o periodo completo
    the difference is the date field FPBEG Table T558B to be the date for employees who are not full with the year or period

  • MATERIALS MASTER DATA ERROR

    HELLO SIR,
    I AM GETTING AN ERROR WHILE CREATING MATERIAL MASTER DATA IN MM01.
    IN BASIC DATA 1 THE BASE UNIT OF MEASURE IS SUPRESSED. I CANT ABLE TO ENTER THE OPTION.
    SO FOR THAT I CANT ABLE MOVE FURTHER.
    PLEASE KINDLY GIVE ME THE SOLUTIONS...

    Hi,
    Please check any documents created or the material or any transacctions.if any transaction is done over the material base unit of material can not be changed.reverse all the transactions happened over the material and try change.Or try to provide alternative unit of measure and its conversions in the UOM tab in the material master.
    Regards,

  • Missing Tax information of Customer Master data

    Dear all,
    I have an error with Customer Account Group. I create a customer account group as Z001 (Domestic customer). After that, I go through Financial Accounting - Account Receivable and Account payable - Customer Account - Master Data - Preparation for Creating Master Data -Define Account Group with screen layout (customers) (also with Define Screen Layout per activities). And for Control Tab, I set all items are optional. But when creating Customer master data for this group, when going to SALE AREA DATA, Tab BILLING DOCUMENT, I found that the Tax information part is missing.
    I try to set all items are optional, but can't resolve this problem. Can you help me ?
    Thank you very much for your help,
    Sylvecat.

    Hi
    Goto TCODE : OVK3 and maintain the Customer Taxes
    Path : SPRO > Sales and Distribution > Basic Functions > Taxes > Define Tax Relevancy Of Master Records
    VVR

  • Displaying Master-Data using ADF DI

    Hi
    I'm trying to display a master data(as a form) and a detail data(as a table) in excel sheet using ADF DI.
    The process I followed is as below.
    1. This is on HR schema. I created a departmentsVO, and dragged Departments from the data control to the top half of a jspx page as a form, and Employees datacontrol that is wihtin the Departments datacontrol into the lower half of the page.
    2. I ran the page, and the master-detail is perfect i.e., when i click navigate the departments form, corresponding employees of that department are coming in a table in the lower half.
    But the problem is when i used this pagedef file to use in an excel file.
    1. Alll form elements are available in the excel as individual components. Table is available as a tree component.
    2. I binded all the form elements in the excel, also bound prev and next buttons, all at the top section of the excel file.
    3. Binded the table component in the bottom of the excel file.
    3. Defined table download action and Worksheet downsync action as worksheet properties. Workbook prop are also defined properly.
    When I ran the page,
    Form elements and table is prefilled, navigation of form is also working fine. But when I navigate through the form, the corresponding employees are not changing, they are all employees of the first department id.
    My requirement is to change the employee table as the department form is being navigated.
    Can someone pls give some suggestions. What i think I may be missing is that the table is not getting refreshed as I navigate the form(But I already associated the table download action to the worksheet properties).
    Thanks in advance,
    Ravi.

    Found a solution. This might be helpful to others...so m posting it :-)
    While binding the 'Next' button, I added 'Download' component action of the table to the actionset of the button(which already has UpSycn, Next, DownSync).
    So, on click on the button, it actually downloads the latest data to the table. And master - details were shown just perfectly :-)

  • Missing authorization check on the IM Reports

    Hi,
    We use RAIMINFO reports (S_ALR_87012805, S_ALR_87012806 u2026 ) to display
    structure and values in Ferrero Spa investment program
    On the initial screen, the value types which have to be output, are
    determined by the authorization checks to be carried out .
    For example in case that an user decides to display the plan or budget
    references to program position, the user has to have the authorizations
    on the Persons responsible (A_IMPR_VER). For us this is OK because we
    define responsibilities through A_IMPR_VER. But if user decides to
    display the appropriation request or measures and he doesnu2019t indicates
    the program position it seems that anything on the A_IMPR_VER will be
    performed. We need that the check on A_IMPR_VER will be performed always(for all objects: measures, appropriation request ).
    We think this is a function missing in RAIMINFO and in all the IM
    reports.
    Could you help us to solve this problem?
    Thanks and best regards,

    Hi,
    If you want use check box in crystal., then you can do this by writing piece of code.
    please try for
    If {Table.Field} = True Then
    'Display the checkbox of your choice here
    Formula = Chr(254).
    thanks.
    Bala

  • Delta loading master data errors in source system Message RSM340 quality

    Hi,
    I'm trying to load with delta  master data for standard data sources.
    In dev, everything seems fine.
    I' ve transported the same elements to QA. I've done init, it is ok. I do delta, I get red status: Errors in source system, message no. RSM340. I've tried to put my delta on green, I've remade my init, I've reloading with delta, and I get the same problem.
    I have this problem for all master data loading.
    Should I install some infoobject from Bi Content?
    Thanks a lot !

    Hi,
    Check following threads
    [3003 + R3299 + RSM340] error messages loading an ODS
    Extraction failed with error Message no. RSM340
    BW Data Loading - Delta Processes
    Thanks and regards
    Kiran

  • "Error reading crrdit master data " error in Contract management(CRM 2007)

    Hi All,
    In CRM 2007,whenever we navigate to contract management screen,error message come which is "Error reading credit master data "
    Any suggestion on how to solve this issue.
    Regrads
    Nikhil

    Hi All,
    This is resolved.
    Just set the  entry in the table CRMV_CREDIT_GEN to 'Do not Display credit master data '
    Regards
    Ankit

  • Master data error

    hi
       what is the solution,when master data is sent to cube
    with out check marking ignore duplecate data records at infopackage level.
    thanks in advance....
    points will be assigned

    No error while loadng the cube.
    But when you are loading the master data object, you would get errors if there are duplicate entries. In that case check the box.

Maybe you are looking for