Missing Buttons in Site Settings?

Is anyone else having problems with missing buttons and other interface items in the site setup menu? I've got CS6 for mac via creative cloud.
If I hover over where they should be, they appear until I leave the screen. It's not shutting me down, but it's a little weird...

I am having the same problems as listed above, and all my software is up-to-date.
My Hardware/Software specs are as follows:
Mac Pro
Processor: 2.8 GHz Quad-Core Intel Xeon
Memory: 2 GB 800 MHz DDR2 FB-DIMM
Graphics: ATI Radeon HD 2600 XT 256 MB
Software: OS X 10.8.2 (12C60)
Dreamweaver CS6 v 12.0
I tried switching my web browser to Firefox, as Safari was causing problems with dialoge boxes in Photoshop CS6, but that didn't solve the problem with Dreamweaver.

Similar Messages

SharePoint 2013 - Site Settings - Users and permissions - "Access Request and invitations" link missing

I am site collection administrator and have configured the outgoing email in Central administration but "Access Request and invitations" link is missing, pl advice any additional configurations for this link to show up
I was though able to configure access requests by going to Site Settings->Users and permission and on the ribbon selected "Access Request Settings"
What is the difference in either of the approaches?
Thanks
Abhishek

Hi there,
I noticed this post, and didnt really find an appropriate solution to your issue. I noticed the same issue when dealing with Access Requests. First of all to make sure that the Request feature is enabled, you need to access
Site Settings -> Site Permissions -> Access Request Settings -> Make sure the
'Allow access requests' option is enabled.
The Allow access screen just allows you to enable the feature and also to specify a email address that notifications are sent to. Whereas the 'Access Requests and Invitations' section provides a screen to manage Access Requests and request history.
I noticed then that the Access Requests and Invitations link under 'User and Permissions' didnt actually appear until someone actually requests to join the site. It seems that this is needed to display the screen. Once actioned once, the option stays there.
Hope it helps

Why the dependency of "Site settings" for the "About me"-button in the top menu?

Hello, I recently had a customer case where the customer asked why certain users couldn't see the "About me"-button in the top personal actions menu, after they clicked at the user name/avatar. Only user details, "Sign out" and "My
settings" was visible for the user, who had an user license and a my site. There was also no customizations whatsoever in either javascript or css that could cause this, and the masterpage or the personal actions control doesn't seem to actually have
anything to do with the "About me"-button.
After some tracing and testing of Microsoft's code so we now know why the "About me" is not visible to all users. "About me" button depends on whether the "Site
Settings" is available in the menu or not. For the "Visitors" then there is no "Site Settings" because of their "Read"-permission level and thus does the "About me" button not appear in the menu.
In sposuitenav.js there is a loop for all ie:menuitem and inside of that there is these lines:
if(menuItem.id.indexOf("MenuItem_Settings") > 0) {
hasSiteSettingsMenuItem = true;
And a bit further down the code there is this:
if(!hasSiteSettingsMenuItem) {
a.AboutMeLink = null;
Which will cause so that the "About me"-link is null and is not rendered in the personal actions menu. Otherwise the AboutMeLink would have had the default value that is set by the code earlier.
So my question really, is why have Microsoft made the "About me"-button depending on whether or not the "Site settings" is visible for the user?
Because neither I nor my client can understand why there should be any relationship between Site Settings and the About Me link. Shouldn't anyone be able to go to their "my site"? As long as they have one, I can't see any reason to prohibit
anyone else than site administrators to see and use the "About me"-link.

It's a recent change it seems, people on the Office 365 Yammer network have noticed this as well. Microsoft has confirmed this as an issue and will work to fix it.
Join there if you haven't already :)
https://www.yammer.com/itpronetwork/#/Threads/show?threadId=466244664

My new tab page displays only an empty grid. Missing thumbnails -and- sites. I -think- my settings are correct. Please advise.

My new tab page displays only an empty grid. Missing thumbnails -and- sites. I -think- my settings are correct. Please advise.

What are the settings for clearing history when Firefox closes?
Make sure that you do not clear the Browsing Cache as that will remove the thumbnails that are stored in it.

Editing Site Settings Gives "Unable to process your request"

Hi,
I get "unable to process your request" when trying to edit the FIM portal site settings. I'm using my domain admin account I installed FIM under, which is also a SharePoint administrator. I'm trying to edit some basic UI details.
I've installed FIM 2010 R2 SP1 on SharePoint Foundation 2010 with SQL 2008 R2. I tried logging into the FIM portal with the fim service account, but this still gives the same error when editing site settings. I'm using separate servers for the fim portal,
fim service DB and fim sync server (all have their firewalls turned off).
Advice on how to resolve this is much appreciated.
Thanks

Thanks Tomek,
Managed to get this working - I missed out the alternate access mappings on SharePoint 80. Simply adding the internal and internet URLs worked :-)
http://myitforum.com/cs2/blogs/forefrontsecurity/archive/2011/04/13/fim-2010-service-not-available.aspx
Thanks

I have no "Save Site as Template" in my Sharepoint site settings

Hallo!
I have Sharepoint 2007 installation. Want to make site template. All RTFM I found contains reference to "Save Site as Template" operation, which must be at site settings, at "Look and Feel".
But I cannot find it there!!! I have no such a menu in list settings, and site collection settings too.
And I have no idea how I can workaround it.
Please, help me with solution, or some advise. Maybe, there is some other, command-line method to do it...

Hi Jamil,
please visit this link it will help you.
http://blogs.msdn.com/b/richin/archive/2011/12/05/save-site-as-template-option-missing-in-sharepoint-2010.aspx
http://neelb.wordpress.com/2010/10/28/save-site-as-template-in-sharepoint-2010-missing/
Thakns
Pushps

Custom tab missing from Create Site template selection section in SharePoint 2010

Background:I migrated from SP 2007 to SP 2010.
ISSUE: my custom templates are visible in the Gallery list but when i try to create a new site the Custom tab selection is missing.
What am i doing wrong?

Hi,
For a tip to understand for Visual Upgrade refer here :
Visual Upgrade
By Custom Templates, I mean remove old Master Pages : Go To Site Settings --> Look And Feel --> Master Pages (click on Master Pages to open window with Master Pages and CSS Style). From this page select V4Maste.master and default CSS. Refer here for
more on how to change :
Master Page
You can very well get back all your custom settings, but first lets try to resolve your first issue.
Cheers!

No Advanced section under site settings?

I am trying to set up a POP/IMAP email account and there is no Advanced section under the site settings. Also, I keep getting this message " Your email is configured with an external provider. If you want to create E-Mail accounts you need to change your E-Mail settings. " Yet when I click on the button to go to make the change, it just directs me back to the Site Settings screen with no instruction on what to change! Help!

If you are using Third party email services, get MX records settings from your email provider and add it to Site Settings-> Site Domain, as explained here,
Business Catalyst Help | Use an external email provider
If you are gong to host email to Business catalyst, Select Site Settings > Site Domains and then select New MX Record from the More Actions menu.
Select Site Settings > Site Domains and then select New MX Record from the More Actions menu-> New MX Record, select your domain name, and click Save.
Let me know if you have any trouble

The lock symbol is missing on secure sites and there is no back arrow after browsing

I don't like the new toolbar after upgrading firefox.
1. there is no back button to get out of a page
2. the secure lock symbol is missing on secure sites
Please help with changing these 2 problems

In Firefox 4 and later you no longer have the Status bar that showed the padlock in previous Firefox versions.<br />
The padlock only shows that there is a secure connection and doesn't guarantee that you are connected to the right server.<br />
So you might still be connected to the wrong server if you make a typo in the URL and someone has claimed that mistyped URL.<br />
The functionality of the padlock has been replaced by the [[Site Identity Button]] on the left end of the location bar.
See also:
* http://www.dria.org/wordpress/archives/2008/05/06/635/
* https://support.mozilla.org/kb/Site+Identity+Button
If the menu bar is hidden then press the F10 key or hold down the Alt key to make the menu bar appear.
Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
*Open the Customize window via "View > Toolbars > Customize"
*Check that the "Bookmarks Toolbar items" is on the Bookmarks Toolbar
*If the "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the toolbar palette in the customize window to the Bookmarks Toolbar
*If missing items are in the toolbar palette then drag them back from the Customize window on the toolbar
*If you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar set up
*http://kb.mozillazine.org/Toolbar_customization
*https://support.mozilla.org/kb/Back+and+forward+or+other+toolbar+items+are+missing
The arrow to open the tab history of the Back and Forward buttons has been removed in Firefox 4 and later.<br />
Use one of these methods to open the tab history list:
* Right click on the Back or Forward button
* Hold down the left mouse button on the enabled Back or Forward button until the list opens

Same Application Error - while checking the auditing log report in site settings

dear all,
I am getting application error - when I am checking the audit log report from
Site Settings ->Audit log->Run a custom report ->In the save location - when I click browse button.
Any inputs to solve the issue will be helpful?
Cheers
Sathya

Hi,
Try to configure audit settings for a site collection as the link below:
https://support.office.com/en-us/article/Configure-audit-settings-for-a-site-collection-f5a346d0-ee0f-4412-a5e6-d9b5abaa1012
Or check the blogs below:
http://sharepointthomas.blogspot.com/2011/07/how-to-enable-audit-functionality-in.html
http://www.codeproject.com/Articles/431342/Auditing-A-Built-in-Feature-of-SharePoint
Did you check the ULS log?
Best Regards,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Composed looks / Change the look themes are missing when creating site from saved template

Hi,
I found an issue when save you own site template and then want to create a new site from that template the "Change the Look" themes are missing and if you go to site settings, Comosed looks where the themes are stored is empty! Anyone else has
the same experience? Any workaround for this?
regards
Martin

I've just seen this exact problem on a SharePoint 2013 farm as well this morning, but have managed to fix the blank "Composed Looks" list issue, although am still working on the "Change the look" wizard pages.
Edit: found a fix for this too now. See my next post below.
It appears that the process of saving a site as a template and then creating a new site from that template causes the original XsltListViewWebPart used to display the default view of the "Composed Looks" list, to be replaced with a ListViewWebPart,
which appears to be broken.
Edit: have also seen this behaviour on sites created from the built-in templates but haven't determined exactly whether this is a bug. ULS logs never show any errors when this occurs so it appears to be "by-design". Ugh.
There may be a tidier way to fix this, but for now, I used SharePoint Designer 2013 to copy an XsltListViewWebPart from a working "Composed Looks" list, AllItems.aspx page and replaced the ListViewWebPart in the broken Composed Looks list, AllItems.aspx
page with it. There is also some additional post copy-paste tidy up to do on the pasted-in XsltListViewWebPart HTML to get it to work within the context of the site it is now in as it will contain GUIDs and URLs that are only relevant within the site
that you copied it from and these need to be replaced with the GUIDs/URLs from the replaced ListViewWebPart - paste it in a notepad session before deleting/overwriting it so you can grab those bits.
I'll write a more detailed step-by-step if anyone wants it, but this doesn't seem to fix the broken "Change the Look" wizard still, only the "Composed Looks" list default view. I'll look into that now and post back more complete solution if I can
find a fix.
Edit: Found a fix. see my next post below.
Edit Edit: One more thing - on some Composed Looks lists we are seeing empty lists once the default view webPart is fixed up. To correct this, you can copy selected Composed Looks from a working site with a full set.
Before you do that, edit the default view in both the source and destination Composed Looks lists and include the Title field as it is a required field.
Then, you can use Datasheet View (just click the edit list link to put it in Datasheet View mode) to bulk copy/paste Composed Looks between the source and destination lists.
Do a little post-paste tidy up on the URLs as above to make sure that they are correct for their new location and then click on over to your Change the Look wizard.
You should see all of your Composed Looks displayed nicely on the page.
Note that the Current Look might not represent the sites actual appearance as it's settings will reflect the source sites appearance, but you can tweak it with the Wizard now.
Regards,
Glenn
Can you confirm your sharepoint patch level?

Lost site settings

One of my sites is missing from site settings. I imported it from the .ste file but that info was out of date. The server address had changed a couple of years ago, and I was connecting fine from DW until I rebuilt it from the import. Is there somewhere other than the .ste file where this info is kept? I have backups that I can grab something from but don't know what to look for.

Windows or MAC?
What DW version?
On Windows, the site definitions for Dreamweaver CS6 are stored in the Windows Registry at HKEY_CURRENT_USER\Software\Adobe\Common\12.0\Sites.
In Mac OS X, they are at Macintosh HD:<username>:Library:Application Support:Adobe:Common:12.0:Sites:Site Prefs.
In recent versions of Mac OS X, the Library folder is hidden. In the Mac Finder, select Go > Go to Folder, type ~/Library in the search field, and click Go.

My Site Settings: Language Options not applied

On a SharePoint 2013 Server I want that the user be able to select is own My Site Language (as SP2010).
So, goingo to: Services Applications > User Profile Service > Setup My Sites:
And checking in the The Language Options checkbox (Allow user to choose the language of their personal site)
The above option doesn't result in any language selection prompt for the user on the My Site creation.
Ideas?

Hi falloutpt,
Based on the following article, user's My Site will be created with default, primary language of the SharePoint Server 2013 installation on the server by default, then user can change his my site to display other language installed, it should be different
from the SharePoint 2010.
http://technet.microsoft.com/en-us/library/cc262500.aspx#mui
"When enabled, users can use the multilingual user interface feature
for their My Sites. This feature is used to display the site's user interface in a secondary language that the user prefers instead of the default, primary language that was selected when the site was created.
By default, when a new site is created, it is created in the default, primary language of the SharePoint Server 2013 installation on the server. A farm administrator must install language packs on the server before sites can be created in languages
other than the default, primary language.
For My Sites, the multilingual user interface feature is controlled by the Language Options setting when you configure My Site settings. The languages that are available to users correspond to the language packs installed in the server
farm. For more information about language packs, see Install or uninstall language packs for SharePoint 2013."
Change and display language should also have changed in SharePoint 2013, user could display the My Site as other languages from IE language settings, which have being installed on SharePoint server.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/6bf98e09-854e-44e8-a606-4f37f37e2993/where-is-the-select-display-language-in-the-ui-of-sharepoint-2013-site?forum=sharepointgeneral
Thanks
Daniel Yang
TechNet Community Support

Error trying to access Site Settings on sub-sites after migration from WSS 3.0 to Foundation 2010

I have migrated a WSS 3.0 database over to SP Foundation 2010. I can browse all the sites just fine. I can successfully get to Site Actions, Site Settings on the main site(parent). However, when I try to access Site Actions, Site Settings
from any of the subsites, I get the error below. It has been years since we setup the old WSS 3.0 site. I cannot remember what modifications may have been made that could help determine what is causing this. Thanks
Error
File Not Found.
Troubleshoot issues with Microsoft SharePoint Foundation.
Correlation ID: 5096e4a9-5dc2-4fc0-b9bd-c8f758f8ed23
Date and Time: 9/5/2014 2:22:35 PM
In other words
this one works >> http://poly-2008-svr1/_layouts/settings.aspx
this one doesn't work >> http://poly-2008-svr1/11392/_layouts/settings.aspx

Hi Poly,
I recommend to check if the Alternate Access Mapping is correct for the web application where the site exists in Central Administration.
To narrow the issue scope, I recommend to create a new subsite to see if the issue still occurs.
Please also check the ULS log to get the detailed error message.
For SharePoint 2010, by default, ULS log is at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS.
You can check the ULS log by the methods here:
http://blogs.msdn.com/b/opal/archive/2009/12/22/uls-viewer-for-sharepoint-2010-troubleshooting.aspx
http://msdn.microsoft.com/en-us/library/gg193966(v=office.14).aspx
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

My iPad 2 home button has stopped working I have tried the swivel from landscape to portrait whilst holding the button, I have tried holding the off button then the home button and I was told I could create my own home button in the settings but I can't!

My iPad 2 home button has stopped working all together, I have tried the swivel from landscape to portrait whilst holding the home button, I've tried pressing the off switch then pressing the home button, the other thing I was advised to do was create a home button in the settings under the accessibility option but I don't have the option I was advised to use under there! Help! It's really frustrating having to turn the device off everytim I want to switch apps and I really can't afford to send it away to be mended! Many thanks in advance

The accessibilty setting that was mentioned is:
* Enable AssistiveTouch
Enable AssistiveTouch which floats a virtual button on-screen which can mimic all hardware buttons on the device:
Settings>General>Accessibility>AssistiveTouch: turn ON
*Note* If you power off the device using the AssistiveTouch panel (tap the on-screen AssistiveTouch button, Device>Lock Screen (tap and hold to power off)), you will NOT be able to power on the device *if your Sleep/Wake (power) button is not functioning*. You will need to connect the powered off device either to a PC's USB port or an external charger to power the device back on.

Missing Buttons in Site Settings?

Similar Messages

Maybe you are looking for