Missing content

I have a mac book pro with 125g hard drive. I have had it about a month and all my files are stored on external drives. I have just had a message that my start disk if full. I have cleared out trash and all the iphoto photos that I hadn't realised that had been copied onto this drive and I now have plenty of space but when I used Diskwave to check on what was on the hard drive it lists the following:
Applications 12.16gb
Library 6.45gb
System 6.54gb
Users 6.97gb
which totals 32.12gb which should leave me with 92.88gb free but in the left hand column of Diskwave it tells me I have used 70.44gb used which means I should have 54.56 free and under the Macs system information it tells me I have 49.71 free
Why the discrepancies and where are the other files?

   Re-index Macintosh HD.
   Spotlight reindexing will take a while to finish.
   System Preferences > Spotlight > Privacy
   http://support.apple.com/kb/ht2409
   You will see a new category “Other” in the Storage Display.
   About “Other”:
   http://support.apple.com/en-us/HT202867
Note:
If you don’t have Macintosh HD icon on the desktop,
Finder > Preferences > General > Show these items on the desktop:
Enable “Hard disks”.

Similar Messages

How can I show all missing content in iTunes library?

How can I show all missing content (ie. show the exclamation mark against each track)? I can restore the missing content but need to know what is missing without running each track.

One way to identify the broken links in your library is to create this set of playlists:
Lost & Found playlists
Create a playlist called Found, select everything in Music and drag it into the Found playlist. Create a smart playlist called Lost matching All the rules Playlist is Music and Playlist is not Found. Your lost tracks will be in this playlist.
Or use iTunes Folder Watch and enable its option to check for dead tracks on startup.
tt2

I transfered my iTunes library from 1 computer to another and am now missing content. How do I get it back?

I transfered my iTunes library from my old computer to my new computer using iCloud and an missing content. My iPhone still has my full library on it. I've synced my phone but the missing cntent wont transfer over. How do I get my complete library on my new computer? My old computer had windows 7; the new one windows 8. Dont know if this makes any difference.

Delete the garbage that has been created on the new computer.
Copy the ENTIRE iTunes folder from the old computer to the new computer. Launch iTunes, everything will now be as it was on the old computer.

Still missing content after 9.1.6 "upgrade" and content re-installs

I updated to 9.1.6 and immediately I noticed that various .aif files were missing, from my ESX24 instruments and Garageband loops.
After reading other peoples' similar stories and solutions here, I spent some hours (and probably $$ for all the bandwidth) downloading and re-installing "Garageband content" (which showed needed updating) as well as the "Essential" and "Additional" Logic content packages (which were supposedly already installed).
After downloading about 7GB of stuff, I am still missing content, .aif files which are part of ESX24 instruments and Garageband loops.
I guess I'll continue downloading and re-installing the rest of the Jam Pack content -- about another 10GB -- and hope that I get that stuff back. No guarantees though, I suppose.
Apple, this happened to me once before, when I upgraded from Logic Studio 8 to 9. It's really, really maddening.

You'll need to either manually copy over the old content, or download the media packs after you install the 9.0 version. In the Application menu, select "Download additional content...". However, do NOT click the "Select All Uninstalled" and instead download each part separately. A bit of added work, but selecting "Select all uninstalled"is giving people fits in that you end up with a lot of "Download Failed" messages and nothing installs.
HTH,
Tim

SOAPException: faultCode=SOAP-ENV:Protocol; msg=Missing content type

I have a WSDL file for which I have created a Web Service stub/skeleton through jdeveloper(version 10.1.2.3.0). Below is the complete code which has been generated by developer. Now whenever i try to run this file in jdeveloper I get the following exception. Please let me know how to resolve this issue.
Also error message is received at the following line of code:
*msg.send(endpointURL, ""<<some URL>>", requestEnv);*
{code}
*Exception Message*
{code}
[SOAPException: faultCode=SOAP-ENV:Protocol; msg=Missing content type.]
at org.apache.soap.transport.TransportMessage.read(TransportMessage.java:249)
at oracle.soap.transport.http.OracleSOAPHTTPConnection.post(OracleSOAPHTTPConnection.java:973)
at oracle.soap.transport.http.OracleSOAPHTTPConnection.send(OracleSOAPHTTPConnection.java:722)
at org.apache.soap.messaging.Message.send(Message.java:125)
at mypackage.NPVNSDLStub.PANDetails(NPVNSDLStub.java:88)
at mypackage.NPVNSDLStub.main(NPVNSDLStub.java:41)
{code}
*Code generated by Jdeveloper*
{code}
package mypackage;
import oracle.soap.transport.http.OracleSOAPHTTPConnection;
import org.apache.soap.encoding.SOAPMappingRegistry;
import org.w3c.dom.Element;
import java.util.Vector;
import oracle.jdeveloper.webservices.runtime.WrappedDocLiteralStub;
import java.net.URL;
import org.apache.soap.Envelope;
import org.apache.soap.Body;
import org.apache.soap.messaging.Message;
import java.util.Properties;
* Generated by the Oracle JDeveloper 10g Web Services Stub/Skeleton Generator.
* Date Created: Wed Feb 29 18:39:33 IST 2012
* WSDL URL: file:/C:/WS/sample.wsdl
public class NPVNSDLStub extends WrappedDocLiteralStub
public NPVNSDLStub()
m_httpConnection = new OracleSOAPHTTPConnection();
public static void main(String[] args)
try
NPVNSDLStub stub = new NPVNSDLStub();
stub.PANDetails("aaaaa8888a");
catch(Exception ex)
ex.printStackTrace();
private String _endpoint = "<<some URL>>";
public String getEndpoint()
return _endpoint;
public void setEndpoint(String endpoint)
_endpoint = endpoint;
private OracleSOAPHTTPConnection m_httpConnection = null;
private SOAPMappingRegistry m_smr = null;
public String PANDetails(String Request) throws Exception
URL endpointURL = new URL(_endpoint);
Envelope requestEnv = new Envelope();
Body requestBody = new Body();
Vector requestBodyEntries = new Vector();
String wrappingName = "PANValidationRequest";
String targetNamespace = "<<namespace url>>";
Vector requestData = new Vector();
requestData.add(new Object[] {"Request", Request});
requestBodyEntries.addElement(toElement(wrappingName, targetNamespace, requestData, false));
requestBody.setBodyEntries(requestBodyEntries);
requestEnv.setBody(requestBody);
Message msg = new Message();
msg.setSOAPTransport(m_httpConnection);
*msg.send(endpointURL, "<<some URL>>", requestEnv);*
Envelope responseEnv = msg.receiveEnvelope();
Body responseBody = responseEnv.getBody();
Vector responseData = responseBody.getBodyEntries();
return (String)fromElement((Element)responseData.elementAt(0), java.lang.String.class);
{code}
Edited by: EJP on 2/03/2012 17:22: added code tags, but your indentation needs fixing

Kishore,
See the links referenced in these threads.
Web Services and R12
Re: Web Services and R12
Integrated SOA Gateway
Re: Integrated SOA Gateway
Regards,
Hussein

Missing content for inventory management (cube 0IC_C03)

Hi everybody,
I installed the following BI content for inventory management: Cube 0IC_C03, InfoSource 2LIS_03_BX and transfer rules from data source 2LIS_03_BX to info source 2LIS_03_BX. However, I'm not able to the update rule from info source 2LIS_03_BX to info cube 0IC_C03. I can only find the old update rule 0IC_C032LIS_40_S278 -> 0IC_C03.
I also couldn't find the update rule for material movements from 2LIS_03_BF to infocube 0IC_C03.
How can I find this missing content. We are using BI Content Release 704 Level 1.
Thanks for your help!
Thomas

Hi Oscar,
unfortunately, I was not able to find a transformation for the datasource migrated to 7.0.
Btw, how do I determine to which version data sources are replicated. I have an underlying ECC6.0 system. When I replicate all data sources for that source system, datasources automatically show up as 7.0. I'm missing the pop-up question whether or not I want to replicate as 3.5 or 7.0.
Thanks in advance!
Thomas

Missing content, again!

I don't get this!
As an administrator of 15 workstations I keep getting this 'missing content' info.
With the 10.07 update everything was downloaded and installed.
'Download additional content' is greyed out. So, nothing much to do here, right?
But then we move a project from one computer to another. We often get: 'missing content'.
(And workflow comes to a 60 min. halt)
My point is: All computers should be exactly the same. But they are not!
Is this a corrupt download procedure or what?

Yes, it is really bad. Especially since this issue exists since the very beginning of appstore downloads. It is by far the most asked question/the most reported issue.
I resorted to adding Logic Pro to my firewall (a few years ago already), so it stopped connecting to Apple at every startup. I disable that for updates, but everytime I forget to re-enable, I get the same issue. Whatever the cause, they cannot seem to resolve it.

NEW SOLUTION TO UR MISSING CONTENT OF LOGIC STUDIOS EXS24 and others...

hi folks...you're be suprise i've dunn possibly EVERYthing to ressurect the missing contents of EXS24 and other sounds thats has been gone due to installation of Logic Studio...Now for those who transfer there LP7 to the LS8 songs sumtym get no strings and blah blah blah...to limit this down for you...
heres wat to do...
go on to garageband...
create new song and click the plus button to add a new software instrument and you'll get a panel on the rightside of the GB screen with ur desired instruments you'd like to use for to create music...now go on to strings...and you'll see the highlighted outcasted string such as hollywood string and others...double click on it and it'll ask to install GB componant/jam packs and click accept and follow instructions...as its all done and dusted you got all ur preset sounds on ur new logic and everything that wasn't working from LP7 to LS8 is now sorted...and works fully like LP7...lol
and i half expected that it wudn't work i'm now literally over the moon i can continue doing my mixtape...:D

wt i wasn't clear enough is to make sure you have garageband '08 and not garageband 3 or oldies...i figure dthis out wen i did the same on my macbook coz i originally done this on my imac...and figured out the software versions wer different in order to get these missing components...make sure you have Garageband '08 in order to get the missing samplers on ur logic..i've hoped i've helped you out...:) enjoy.

Missing content on ACE module.

Hello
I'm working on a configuration and after a few tests I realized it does not bring the whole content of the site. Most of the times a picture of two are missing. The site is ebay-like with many pictures, banners and flash.
If I right-click âShow Pictureâ the image comes up right away.
For testing purposes and to be able to work along with the previous solution, NAT is set.
So far, I have tried:
I disabled sticky on every serverfarm. It was ON at the beginning.
I changed the predictor. From response app-req-to-resp samples 4 to leastconns slowstart 30.
I tried IE7 and Firefox clearing caches and so.
I set OUTOFSERVICE different servers and made combinations in an attempt to identify a rogue server.
The show serverfarm detail showed failures a couple of times but I later realized it was not related because further testing showed missing content and a steady counter.
No resources were ever denied.
The solution to be replaced by the ACE works fine.
The installed version is c6ace-t1k9-mz.A2_1_1a.bin.
Any advice?
Thanks a lot.
Guido

You did a lot of things wihtout knowing what exactly is going in the network.
The first step in troubleshooting an issue with ACE is to capture a sniffer trace of the tengig interface.
See if the server is sending redirect, or if packets are dropped, ...
Once you have the trace, if you can't see the problem send it to us with the config.
Gilles.

Missing content of BI statistics table?

Hi,
Recently ( Two months back ) we have upgarded our BW system To BI 7.0 and also activated its Technical content!
But the Table RSDDSTAT_OLAP has so many objects lists missing in its contents like infoprovider, Processchain, etc--
How to activate these missing contents so that i cud see these entries in the table RSDDSTAT_OLAP??
Raj

Hi Raj,
RSDDSTAT_OLAP db view is only relevant for front-end & olap statistics. Here is a list of all the source tables:
OLAP Statistics
- Front-end & OLAP Statistics: RSDDSTAT_OLAP (DB view)
- Data Manager Statistics: RSDDSTAT_DM (DB view)
WHM Statistics
- Process Chain Statistics: RSPCLOGCHAIN, RSPCPROCESSLOG
- DTP Statistics: RSDDSTATDTP, RSBKREQUEST
- InfoPackage Statistics: RSDDSTATWHM
WHM Status
- BI Object Status: RSMDATASTATE_EXT
- Process Status: RSPCPROCESSLOG, RSPCLOGCHAIN
For more information you can refer also to this document (BI administration cockpit and BI statistics in SAP NetWeaver 7.0):
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/50f95b21-7fb8-2910-0c81-f6935d4c654b
Regards,
Theodoros

Iweb '08 - frustration with missing content

if anyone can help me, i am slowing going crazy with the frustrations that i have had since i upgraded to iweb 08 about 2 weeks ago.
firstly i have had to rebuild my website twice, as the domain file didn't exist at that point.
so my issue is this - my website is built and looks fabulous, however each page in the iweb program constantly has missing content, and i have to continuously re-add everything back in - there are "question marks" all over where the content SHOULD be and where IT WAS. this is causing so much more work for me, and i just don't have the patience to keep screwing with the program.
if anyone knows how i can fix this problem, please respond!!

After you installed iWeb '08 and ran the updates, did you restart your Mac?
Quit iWeb.
Delete the Preference file - Home Folder/Library/Preferences/com.apple.iWeb.plist.
Restart your Mac.
Run Disk Utility to repair permissions.

After purchasing my macbook, i am missing content from my iTunes

i purchased my macbook air switching from a pc and when i pulled up my itunes, i am missing all my videos and some music. how do i retrieve the missing content?

Hey jennyk67,
Thanks for the question. Did you transfer the iTunes Library from your previous computer over to the Mac? If not, the following resource should help you through that process:
iTunes: How to move your music to a new computer
http://support.apple.com/kb/HT4527
Thanks,
Matt M.

Why is my itune libary missing content on Apple TV iTunes menu

why is my itune libary missing content on Apple TV iTunes menu

Yes i did all whats needed and my apple tv is also showing my computer as "michael s mediathek". But when i choose it is running and running. And in the end e message says that i have to proove the settings.

Blank slides & missing content from Windows PPT to the mac

When I open PowerPoint files from the PC on the mac in PowerPoint 2011, there are blank pages/missing content. When I open in PowerPoint 2008 on the mac it's fine. I've removed duplicated fonts, and checked under a different user profile - but it still persists. Ideas??? I don't really want to use 2008 for slides...

Suggest you post on the Microsoft Mac forums since you're not having issues with any Apple product: http://answers.microsoft.com/en-us/mac

Missing Content Found but no buttons

WHY???
I downloaded and installed as per http://helpx.adobe.com/x-productkb/multi/library-functional-content-missing.html but I don't have any buttons.

Answered:
1. UNINSTALL ENCORE. Including preferences if you feel like it, although its not necessary.
2. REINSTALL ENCORE
3. Open the file noted in Ann Bens post above and drag each of the folders to REPLACE the content within the enclosing Encore application folder. If you are worried about this, first open one of the existing Library folders that was installed with the application and compare its contents with the contents of the same-named folder from the download. You'll see the same files, but dozens more.
Finally! We now have the missing content WITH buttons in the application.
By the way I know that uninstalling isn't necessary in most cases. The reason I did it was that I'd attempted a few times to replace those folders and still wasn't getting the buttons. What I discovered, and the reason why I decided to uninstall/reinstall, was that there was a greyed out "second set" of folders which was probably from one of the attempts to replace the original ones. So I'm only suggesting the above route if you've experienced similar frustration.

Where can I download missing content of Premiere Elements 7.0?

Hello everybody,
I bought Premiere Elements 7.0 some time ago online via download. And now i found out i am missing content because of following missing files:
# File 2: PRE7_WWEFGJ.7z “ 512.8 MB
# File 3: PRE7_Cont_WWEFGJ.exe - 1.2 MB
# File 4: PRE7_Cont_WWEFGJ.7z “ 2.8 GB
When i bought PRE 7.0 i only got the main file (File 1) without the content!
I opened a case in customer support and the answer was, that the support for PRE 7.0 is no longer available. Can anybody help me to find a place where i can download those missing files?
Thank you very much in advance.
breimman

Welcome to the forum.
Neale has posted links to older Functional Content, for several older versions of PrE. I do not have that list handy, but this WAS the location. http://forums.adobe.com/thread/559719?tstart=60
Good luck, and Neale should be by soon, with perhaps an updated set of URL's. Hope they are still available.
Hunt

Missing content

Similar Messages

Maybe you are looking for