Missing driver for co-processor of my hp pavillion dv6000

Hello Mr DavidPK. I saw a similar problem dat i am having with my 3 missing device drivers : 2 base system device and 1 co-processor. but my problem now is with my co-processor driver. Here is my P#: KN050EA#ABU. This problem started when i upgraded from vista to win 7 ultimate

Nvidia Chipset:
http://ftp.hp.com/pub/softpaq/sp37501-38000/sp37730.exe
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Similar Messages

  • How to get source code for WinCE 6.0 USB Camera Driver for ARM4I Processor

    Hi,
    I am implementing USB camera driver for my mini2440 board which has an ARM4I processor. The sample code
    "Windows Embedded CE 6.0 USB camera Driver" downloaded from:
    http://www.microsoft.com/downloads/en/details.aspx?FamilyID=2ef087c0-a4ae-42cc-abd0-c466787c11f2
    does not support ARM4I processors. When trying to generate in VS2005 Platform Builder my WinCE 6.0
    image for mini2440 with the Third party catalog items "MJPEG Decompression Filter" and "USB CameraDriver",
    the linker giver errors. Please advise where to find a working source code for USB (now revision 1.1
    ("full-speed") is supported in my WinCE 6.0 image) camera for my ARM4I processor. The code should 
    be in C# but C++ will be fine also.
    Thanks,
       Paul

    i get this on the hyperterminal when i run the cameradshowapp.exe
    Compulab Windows CE NAND X-Loader for CM-T35                                           
    Built Dec 20 2009 at 16:48:16                            
    Version 1.01.222               
    Commit Date 16/12/09                   
    Jumping to bootloader                    
    Microsoft Windows CE Bootloader Common Library Version 1.4 Built Dec 20 2009 16:                                                                               
    46:16    
    INFO:OALLogSetZones: dpCurSettings.ulZoneMask: 0x200b                                                    
    Texas Instruments Windows CE EBOOT for CM-T35, Built Dec 20 2009 at 16:48:10                                                                           
    Version 1.01.222               
    OMAP3430 Version 0x4b7ae02f (Unknown)                                    
    TPS659XX Version 0x10 (ES2.x)                            
    -OEMPinMuxSetup....                  
    System ready!            
    Preparing for download...                        
    INFO: Predownload               
    +FMD_Init        
    Checking bootloader blocks are marked as reserved (Num = 6)                                                          
    +FMD_Init        
    WARN: Boot config wasn't found, using defaults                                             
    +FMD_Init        
    OALFlashStoreOpen: 4096 blocks, 64 sectors/block                                               
    OALFlashStoreOpen: 2048 bytes/sector, 14 reserved blocks                                                       
    Calling LCD_TurnOn                 
    +FMD_Init        
    +FMD_Init        
    BLConfigureFlashPartitions: dwBootPartitionSectorCount = 0x5fff, partition actua                                                                               
    l size =0x4d3a!!!                
    Hit space to enter configuration menu 5...                                         
    Hit space to enter configuration menu 4...                                         
    Hit space to enter configuration menu 3...                                         
    Hit space to enter configuration menu 2...                                         
    Hit space to enter configuration menu 1...                                         
    INFO: Boot Device location = 0x8000020                                     
    Load NK image from flash memory                              
    +FMD_Init        
    ROMHDR (pTOC = 0x823b8c28) ---------------------                                               
      DLL First           : 0x4001c001                                 
      DLL Last            : 0x41c7c0d8                                 
      Physical First      : 0x84001000                                 
      Physical Last       : 0x863bbdec                                 
      Num Modules         :        294                                 
      RAM Start           : 0x863c0000                                 
      RAM Free            : 0x863d5000                                 
      RAM End             : 0x90800000                                 
      Num Copy Entries                        
      Copy Entries Offset : 0x85256e38                                 
      Prof Symbol Length  : 0x00000000                                 
      Prof Symbol Offset  : 0x00000000                                 
      Num Files           :        116                                 
      Kernel Flags        : 0x00000002                                 
      FileSys RAM Percent : 0x00000020                                 
      Driver Glob Start   : 0x00000000                                 
      Driver Glob Length  : 0x00000000                                 
      CPU                 :     0x01c2                                 
      MiscFlags           :     0x0002                                 
      Extensions          : 0x84002020                                 
      Tracking Mem Start  : 0x00000000                                 
      Tracking Mem Length : 0x00000000                                 
    NK Image Loaded            
    Launch Windows CE image by jumping to 0x80001000...                                                  
    Windows CE Kernel for ARM (Thumb Enabled) Built on Apr  5 2011 at 17:47:22                                                                         
    +OEMInit       
    ýSETDATAOUT access is OK....                           
    Forcing clean boot                 
    MainMemoryEndAddress = 0x90800000                                
    -OEMInit       
    +FMD_Init        
    Dumping registry defined VK                          
    Row 0:  0x18    0x9     0x25    0x0     0x0     0x0                                                  
    Row 1:  0x26    0xd     0x28    0x0     0x0     0x0                                                  
    Row 2:  0x27    0x24    0x23    0x0     0x0     0x0                                                  
    Row 3:  0x0     0x0     0x0     0x0     0x0     0x0                                                  
    Row 4:  0x0     0x0     0x0     0x0     0x0                                             
    Row 5:  0x0     0x0     0x0     0x0     0x0     0x0                                                  
    SMSC922x: Core Ethernet Init.                            
    Lan9220 identified. ID_REV = 0x92200000                                      
    SMSC922x: MAC address = 00:01:c0:0a:a0:db                                        
    Lan9220 identified. ID_REV = 0x92200000                                      
    SMSC922x: MAC address = 00:01:c0:09:88:80                                        
    SDIO8686: Loading Driver [version = 38.p44]                                          
    SDIO8686: Reset with TPS GPIO 2 --> done                                       
    !!!Kernel mode PSL 'PRdr' de-registered!!!                                         
    !!!Kernel mode PSL 'HRdr' de-registered!!!                                         
    !!!Kernel mode PSL 'FRdr' de-registered!!!                                         
    EHCI USB Host: HcdPdd_Init+                          
    [OTG] OMAPMHSUSBOTG::Init()+                           
    OMAPMHSUSBOTG::PostInit(): Start.                                
    DSPLINK Module (1.61.04) created on Date: Jun 24 2009 Time: 16:30:52                                                                   
    Display parameters:                  
            Height = 0x280                     
            Width = 0x1e0
            HSW = 0x20
            HFP = 0x8
            HBP = 0x17
            VSW = 0x1
            VFP = 0x4
            VBP = 0x3
            DVI is not enabled
            PixelClkDiv = 0x7
            LogClkDiv = 0x1
            ClkSelDSS = 0x5
    TD035:: LCDTurnOn
    TD035STEE1: Turned display on.
    TD035:: Finished LCD VGA init
    AUTOLAUNCH: Checking HKEY_LOCAL_MACHINE\Startup key for programs to run.
    Can't open HKEY_LOCAL_MACHINE\Startup key.
    [WiFi]: Firmware Version: 9.70.3.23
    CCaptureFramework: Failed setting up the camera data.
    CameraDShowApp: Initializing the camera driver list failed.CameraDShowApp: Retri
    eving the driver list failed.CameraDShowApp: Selecting the camera device failed.
    CameraDShowApp: Selecting the camera device failed.CameraDShowApp: Selecting the
     camera device failed.CameraDShowApp: Selecting the camera device failed.CCaptur
    eFramework: Retrieving the still stream config failed.
    CameraDShowApp: Initializing the capture graph failed.

  • Missing driver for Tecra A11

    Hello,
    I have a Toshiba laptop, model Tecra A11, part No. PTSE3U-05Q01P
    I have an issue with the operating system, Windows XP SP3, it doesn't recognize a device from the laptop and shows the Hardware wizard from Windows XP.
    The computer worked without problem since the purchase but now ocurred this issue.
    We have tried the automatic install provided by Windows with no avail. Windows didn't install the driver.
    In the Windows device manager, we see a device with a exclamation mark, as "Unknown device".
    In the properties dialog of such device, Windows reports that it have no driver installed.
    In the Details tab, the system shows de Device Instance ID: ACPI\IFX0102\4&375529C7&0
    In the Toshiba website, in the support section, there are many available downloads, but we don't know which file is the required to solve the problem.
    Thanks for any help you can give me.
    Best regards,
    Carlos
    Attachments:
    Toshiba_problem02.jpg ‏62 KB
    Toshiba_problem03.jpg ‏65 KB
    Toshiba_problem04.jpg ‏147 KB
    Toshiba_problem04.jpg ‏147 KB

    Tecra A11 (PTSE3U-05Q01P)
    Has essentially the same spec as this model: Tecra A11-S3540 (PTSE3U-00R00G)
    Downloads here. 
    My guess is that you are missing one of these - maybe both.
       TPM Driver for Windows XP
       Infineon TPM Software Professional Package for Windows XP/Vista/7 (32/64)
    Isn't it time to upgrade to Windows 7?
    -Jerry

  • [W510] Missing driver for SCSIADAPTER

    Hi!
    My Thinvatage Tool is warning me of a missing decive driver. The Device is called "ADZBKF8F IDE Controller".
    Looking into the device details I found out the it is an SCSI Adapter. I could not find a driver for this, nor could windows do. Wehre can I get the driver for this?
    Further Info:
    W510 4389-W1B
    Original Windows 7 Installation

    Try reinstalling Daemon Tools?

  • Win 7 RC missing driver for HDSPA erricsson f3507g

    I have just made a upgrade of my W500-4063-B18 to windows 7RC,  32bit. I have no driver for my HDSPA modem, anyone there have found a solution??
    Borgmesteren

    "the application was not build for this platform"
    This means that one of two drivers are missing. 
    I think it's the System interface driver, found here:
    http://www-307.ibm.com/pc/support/site.wss/WIN7-BE​TA.html#sid
    If that's  not right its this one:
    http://www-307.ibm.com/pc/support/site.wss/WIN7-BE​TA.html#tpmd
    Thinkpad power management driver. 
    Had the same problem myself

  • Missing driver for Z230 WorkStatio​n?

    Hi,
    Now its on again...
    Does anyone know the correct driver for:
    PCI\VEN_8086&DEV_153A&SUBSYS_1905103C&REV_05\3&115​83659&0&C8
    Hope you are able to help!
    Thanks,
    Allan

    Hi:
    See if this driver works...first or second file depending on bit version.
    https://downloadcenter.intel.com/download/23071/Ne​twork-Adapter-Driver-for-Windows-8-1-

  • Missing Driver For Video Controller

    my laptop's model no. is toshiba satellite pro l510. I have windows 7 installed in my laptop . my videos on my laptop was working fine till yesterday but sudeenly my vlc crashed and other video players were also crashing so i tried to update the display driver but couldn't so i unistalled it . But now i'm trying to reinstall it but the driver is not installing . also in the device manager i am unable to find the display adapter icon. and i'm getting a yellow colour icon in my other devices option in the device manager saying video controller (vga compatible)when i'm double clicking it , it says "The drivers for this device are not installed. (Code 28)Data error (cyclic redundancy check).
    To find a driver for this device, click Update Driver" i'm not able to find the right drivers for my laptop . alll the drivers i've downloaded are not installing or hasn't heldped. plzz help..

    The CRC mismatch error means a system file or a registry entry doesnt match what windows or the driver is expecting. In some cases a simple chkdsk or a registry cleaner will solve the problem and in some cases a full restore is needed. Click the start button.Right click my computer.Select Properties -> Tools -> Check Now -> Start -> Schedule Disk Check -> Next Boot -> Restart PC I would also advise running a registry cleaner like ccleaner to check for errors.http://www.piriform.com/ccleaner Regsitry Tab -> Scan For Issues -> Wait until done -> Fix Selected Issues. While you are in there you should go ahead and run the regular cleaner to, but thats up to you.Cleaner -> Run Cleaner

  • Missing Driver for Epson PictureMate 500

    Can someone help me? I've recently crossed over from Windows and while delighted I made the move I still can't print my photos. I've gone onto the EPSON website, downloaded the correct installer (epson11775.dmg) and run it. But when I then connect the printer and run iPhoto it can't find the correct printer driver. I'm looking under EPSON, Epson PM... but "Epson PM 500" isn't there? What am I doing wrong - where can I locate the driver that the installation software installed?

    Hi Jamie
    It's not often you even need to install a driver for Mac.
    Normal procedure is, physically connect the printer to the USB port, switch it on.
    Open Printer Setup Utility (found in Applications/Utilities), click Add
    You are then shown the Printer already selected, and the driver for it that came with the Mac is automatically loaded. Press OK and you're done.
    That's what I would have done first. However to again install the driver, which would be updating the existing one, one just double clicks on the epson28087eu.sit package, which will open and run an installer which will install the driver files to their correct locations. You don't have to manually place them anywhere.
    So the question is, can Printer Setup Utility see your printer when you click Add? If not you may have to select from there, in one of the dialogue boxes and select 'USB'.
    regards roam

  • Missing driver for usb port

    I received an alert to update my ipod software today which i accepted and i now no longer have a driver for my usb port

    SAME THING HAPPENED TO ME AND ALL BECUASE I WAS HELPING MY HUSBAND WITH HIS NEWER VERSION OF THE NANO THAT HE GOT FOR CHRISTMAS, NOW I CANT USE MINE!!!

  • Satellite U840-113: Missing driver for PCI-Communications controller

    *Toshiba Satellite U840-113 - PSU4SE:* Win7-Prof-64Bit with original MS-DVD on new SSD completly new installed, RAID disabled, no RAID-Driver oder RAID-Software installed, internal SSD now as normal SSD in use, all drivers successfull installed - except for the following device: in the Device Manager I find under the "Another Devices" the position *"? PCI-Communications controller (single)".*
    Who can help me to locate / find the correct driver for this "PCI-Communications controller" ???
    What ist this? Do I need this?
    The System seems to run perfectly; shall I disable this Device?
    Many thanks for helpful answers!!!

    Hi
    Maybe this Toshiba article could be helpful:
    http://www.mytoshiba.com.au/support/items/faq/222
    The PCI Simple Communications Controller is part of Intel AMT Management Engine Interface and is related to networking on your computer.
    You will need to install the Intel(R) AMT Management Engine Interface driver.

  • Missing driver for "Base System Device"

    Hi,
    I have a N200 (0769) with WIN7 (32 bit).
    In the Device manager I have two "other devices" with missing drivers named "Base System Device".
    I could'n find any of that.
    I try looking for the Hardwar IDs:
    PCI\VEN_1180&DEV_0592&SUBSYS_382C17AA&REV_0A
    PCI\VEN_1180&DEV_0592&SUBSYS_382C17AA
    PCI\VEN_1180&DEV_0592&CC_088000
    PCI\VEN_1180&DEV_0592&CC_0880
    PCI\VEN_1180&DEV_0843&SUBSYS_382B17AA&REV_01
    PCI\VEN_1180&DEV_0843&SUBSYS_382B17AA
    PCI\VEN_1180&DEV_0843&CC_088000
    PCI\VEN_1180&DEV_0843&CC_0880
    But with no success.
    Any help where can I find that?
    Thanks in advance
    Solved!
    Go to Solution.

    hi nadne,
      Welcome to Lenovo Community Forums!
    Can you try installing this driver
    Ricoh Multi Card Reader Driver
    7kss73ww.exe
    3.25 MB
    Hope this helps,
    Cheers!
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Missing driver for "High Definition Audio Bus" in T61 XP SP3

    Dear members, I hope you can help. 
    My T61 hard disk crashed and I rebuit a new one from scratch.  I am missing the above driver.  In Device Manager, I have a yellow exclamation mark by the "Audio Device on High definition Audio Bus" under the "Sound, video and game controllers" group.
    I have downloaded the following drivers from the Lenovo website and installed them. 
    7ka114ww.exe; 7fma13ww.exe; 7fmb14ww.exe.
    Thank you again for your help.  Steve

    The modem driver also is needed to be installed as well as Power Management Driver and Hotkey Features.
    My home-forum: http://www.thinkpad-forum.de
    Wiki: Deutsches ThinkPad-Wiki English ThinkWiki
    My ThinkPad-Collection

  • Missing driver for my HP 15 r-249 TU laptop

    hiPlease provide me drivers for my new laptop HP 15 r-249 TU which were missing.I need the following drivers PCI\VEN_8086&DEV_9C22&SUBSYS_2211103C&REV_04 PCI\VEN_10EC&DEV_5229&SUBSYS_2211103C&REV_01 ACPI\VEN_HPQ&DEV_6001 kindly help me.

    mk79 wrote:
    Dear expert,
    thank you for your prompt answer. Please find below details you had mentioned in your reply.
    OS - Windows 7 64 bit
    Bluetooth controller - PCI\VEN_1814&DEV_3298&CC_0D11 Ralink Bluetooth 4.0
    Ethernet controller - PCI\VEN_10EC&DEV_8136&CC_0200 Realtek RTL8102E Family PCI-E Fast Ethernet NIC
    Network controller - PCI\VEN_1814&DEV_3290&CC_0280 Ralink Wifi 802.11n
    PCI Device - PCI\VEN_10EC&DEV_5229&CC_FF00 Realtek media card reader
    PCI Simple Comm Cntroller - PCI\VEN_8086&DEV_9C3A&CC_0780 Intel IMEI driver software
    SM Bus Controller - PCI\VEN_8086&DEV_9C22&CC_0C05 Intel chipset driver
    USB COntroller - PCI\VEN_8086&DEV_9C31&CC_0C03 Intel USB 3.0 eXtensible host controller
    Once again, thanks a lot for responding to my question.
    Thanks,
    Let me know how these drivers work out.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Cisco VPN Client Driver for Atom Processor Tablet

    I recently bought a Dell Venue 8 Pro and installed Cisco VPN Client (5.0.05.0290). I get the Error message "Reason 440: Driver Failure"
    This is perhaps this is because the client driver is not compatible with the Atom processor of the Venue 8 Pro. I have serched Dell for a driver but found none.
    Any ideas?
    Thanks,
    H

    Hi,
    According to your description, I think it is compatibility problem.
    I suggest you use the vpn in the windows 7 compatibility mode.
    Making older programs compatible with this version of Windows:
    http://windows.microsoft.com/en-GB/windows-8/older-programs-compatible-version-windows
    If it doesn't work, I suggest you use the method as the following thread mentioned:
    http://social.technet.microsoft.com/Forums/windows/en-US/ad556ff3-8d33-453e-8b16-71e36e23e2c6/cisco-vpn-client-and-windows-81-preview-determinist-network-enhancer-dilema?forum=w8itpronetworking
    Hope this helps.
    Regards,
    Kelvin hsu
    TechNet Community Support

  • Missing driver for "Base system device" x2 after Windows 7 install on laptop

    Upon upgrading to SSD drive and fresh installation of Windows Professional 64 bit, I have two conflicts in device manager referring to "base system device". Both devices are PCI Slot 2 (PCI bus 67 device 0 function 1)
    Both devices report the following code in system information: 
    PCI/VEN_1180&DEV_E852&SUBSYS_146D103C&REV_01/4&7ECE869&0&02E2
    I have read through 16 pages of other people with simlar problems but not the same code. I have installed the Ricoh 5-in-1 reader for 64 bit software with no success.  Any help will be greatly appreciated
    This question was solved.
    View Solution.

    Here is the link.
    http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=4173846&swItemId=ob_79991_1&swEnvOid=4059

Maybe you are looking for

  • Populating the condition tables

    hi , can anyone explain me clearly ,how to populate the condition tables programatically. its really urgent. regards, srikanth tulasi. Edited by: srikanth tulasi on Apr 9, 2008 11:02 AM

  • Stop/Kill a Abstract portal component

    Hi All, I am working on EP 7.0 version. I have created a Abstract Portal component and uploaded the par file using Portal Archive tool. I ran the component by executing the url as below: http://<hostname>:<Port no>/irj/servlet/prt/portal/prtroot/Parf

  • Photostream issues with pc

    recently, photostream is not downloading photos to my pc. it was working fine until last week. now nothing new is getting pushed. what should i do?

  • Cross Tab export : Excel Data Only - Row headings are *bottom* aligned?

    Hi All, Having a problem with Crystal 11 / BOXI. I have a Cross Tab working fine that has four Row groupings (labels on the left). In Preview mode, it looks as expected. Row #1 label appears on line 1. Row #1 label shows blank on line 2,3,4 etc until

  • Update automatically a JAR file

    He folks! Here is what i want to: 1. Develop a little dummy java applet (just for testing), placed in a jar file. 2. That applet should be signed as a trusted applet, so that it can do some more stuff on the client and 3. Every time the user starts t