Missing file:       /private/etc/cups/ppds.dat

Cannot open my printer's utility - Lexmark z23 - All was well, then we updated to 10.4.5.
I know this file is missing: /private/etc/cups/ppds.dat
Any thoughts on where I might access it would be appreciated, or, confirm for me I'm gonna have to slog thru all the packages on the original install cds to find it.... : - 0
Thank you!!!!
YES, I read archived threads and know all about Miguel; - )

Geez Greg - Thanx for your time but that response is
almost insulting - Try restarting? That's like number
one on the newbie hit parade dude, right along
starting up holding down the shift key or running
fsck -y. Thanks for trying.
And your response is supposed to make others want to reply?
Anyone else? Please. I'm starting to think I got
screwed from using this printer when I upgraded my OS.
A quick search indicates that Greg is correct that the file in question is built by cupsd as needed. Surprised? I'm not. You could have restarted your computer several times in the amount of time it took you to post your rant.
If you don't want to restart your computer, then just restart CUPS. If that doesn't work, reset the printing system from the Printer Setup Utility. You can also search and search through the installation disks. You won't find that file, however. CUPS gets installed as part of the Essentials.pkg. The ppds.dat file, however, is not a file that gets installed.
Back to your original post -- I don't see a connection that would lead to a conclusion that the missing ppds.dat file is causing your printer's utility not to open. Even when you restore the ppds.dat file, you may not be able to open the utility for some other reason.
Matt
Mac Mini; B&W G3/300    

Similar Messages

  • Terminal Error: Unable to read "/private/etc/cups/cups-files.conf" due to errors.

    After finding out that my Kodak ESP C310 printer was no longer printing after installing OS X Yosemite, I tried entering these into the terminal to get the driver working again.
    sudo sh -c 'echo "Sandboxing Relaxed" >> /etc/cups/cups-files.conf'
    sudo launchctl stop org.cups.cupsd
    Nothing happened the first time I tried it, so I tried it again with still no luck. Now within seconds of opening the terminal I get this message :
    " /private/etc/cups/cups-files.conf"
    It pops up every few seconds, so it is practically impossible for me to type anything into the terminal without it popping up right in the middle. I tried the fix from the other discussion on this issue, and that didn't work. also I'm noticing that my printer isn't even added under "printers and scanners" anymore. I tried to re-add it, but I cannot without a driver that functions with 10.10.1
    Any suggestions on how I should deal with this?

    The permissions and ownership on /private/etc/cups/cups-files.conf should be:
    /bin/ls -leO@ /private/etc/cups/cups-files.conf
    -rw-r--r--  1 root  _lp  compressed 3297 Mar  8  2014 /private/etc/cups/cups-files.conf
    See "man cups-files" for the format of the cups-files.conf file
    The contents of the /private/etc/cups/cups-files.conf file should look like:
    # "$Id: cups-files.conf.in 11203 2013-07-26 21:32:33Z msweet $"
    # Sample file/directory/user/group configuration file for the CUPS scheduler.
    # See "man cups-files.conf" for a complete description of this file.
    # List of events that are considered fatal errors for the scheduler...
    #FatalErrors config
    # Do we call fsync() after writing configuration or status files?
    #SyncOnClose No
    # Default user and group for filters/backends/helper programs; this cannot be
    # any user or group that resolves to ID 0 for security reasons...
    #User _lp
    #Group _lp
    # Administrator user group, used to match @SYSTEM in cupsd.conf policy rules...
    SystemGroup admin
    SystemGroupAuthKey system.print.admin
    # User that is substituted for unauthenticated (remote) root accesses...
    #RemoteRoot remroot
    # Do we allow file: device URIs other than to /dev/null?
    #FileDevice No
    # Permissions for configuration and log files...
    #ConfigFilePerm 0644
    #LogFilePerm 0644
    # Location of the file logging all access to the scheduler; may be the name
    # "syslog". If not an absolute path, the value of ServerRoot is used as the
    # root directory.  Also see the "AccessLogLevel" directive in cupsd.conf.
    AccessLog /private/var/log/cups/access_log
    # Location of cache files used by the scheduler...
    #CacheDir /private/var/spool/cups/cache
    # Location of data files used by the scheduler...
    #DataDir /usr/share/cups
    # Location of the static web content served by the scheduler...
    #DocumentRoot /usr/share/doc/cups
    # Location of the file logging all messages produced by the scheduler and any
    # helper programs; may be the name "syslog". If not an absolute path, the value
    # of ServerRoot is used as the root directory.  Also see the "LogLevel"
    # directive in cupsd.conf.
    ErrorLog /private/var/log/cups/error_log
    # Location of fonts used by older print filters...
    #FontPath /usr/share/cups/fonts
    # Location of LPD configuration
    #LPDConfigFile launchd:///System/Library/LaunchDaemons/org.cups.cups-lpd.plist
    # Location of the file logging all pages printed by the scheduler and any
    # helper programs; may be the name "syslog". If not an absolute path, the value
    # of ServerRoot is used as the root directory.  Also see the "PageLogFormat"
    # directive in cupsd.conf.
    PageLog /private/var/log/cups/page_log
    # Location of the file listing all of the local printers...
    #Printcap /Library/Preferences/org.cups.printers.plist
    # Format of the Printcap file...
    #PrintcapFormat bsd
    #PrintcapFormat plist
    #PrintcapFormat solaris
    # Location of all spool files...
    #RequestRoot /private/var/spool/cups
    # Location of helper programs...
    #ServerBin /usr/libexec/cups
    # SSL/TLS certificate for the scheduler...
    #ServerCertificate /Library/Keychains/System.keychain
    # SSL/TLS private key for the scheduler...
    #ServerKey
    # Location of other configuration files...
    #ServerRoot /private/etc/cups
    # Location of Samba configuration file...
    #SMBConfigFile
    # Location of scheduler state files...
    #StateDir /private/etc/cups
    # Location of scheduler/helper temporary files. This directory is emptied on
    # scheduler startup and cannot be one of the standard (public) temporary
    # directory locations for security reasons...
    #TempDir /private/var/spool/cups/tmp
    # End of "$Id: cups-files.conf.in 11203 2013-07-26 21:32:33Z msweet $".

  • Group differs on "private/etc/cups", should be 0, group is 26.

    Greetings.
    After performing Verify Disk Permission, i have this massage:
    *Group differs on "private/etc/cups", should be 0, group is 26.*
    Immediately i performed Repair Disk Permission but in the end i still get this massage.
    Any idea what dose that means?
    Thank you so much.
    Cheers.

    ChrisWad wrote:
    How do you submit a bug to Apple as I want to put some weight behing this one.
    Chris
    Why? Who says it's a bug worth worrying about?
    Ever since Repair Permissions was introduced (around 10.1.5 I seem to remember, although it was 10.2 before it was integrated into Disk Utility) there have been occurrences of these "spurious" errors.
    Take a look at these:
    Spurious Permissions errors in 10.2
    Spurious Permission errors in OS X 10.3
    Spurious Permission errors in OS X 10.4
    Some of these disappeared with point updates, others didn't. They did not prevent anyone's system working. They were acknowledged as unimportant in this article: Disk Utility reports some messages that you can ignore when checking permissions.
    I didn't write an equivalent for 10.5, because there were so many ACL and SUID errors which changed with each version, see Mac OS X 10.5: Disk Utility's Repair Disk Permissions reports issues with SUID files.
    This particular message is of no consequence. It may or may not disappear with the next system update. But if it bothers you, the answer is simple: stop Repairing Permissions!

  • Private/etc/cups Permission

    Almost every time I Repair Permission, it finds and repairs "Group differs on "private/etc/cups", should be 0, group is 26." What is that? Why does it happen? Thanks

    Well what I've seen is that DiskUtility always finds some permissions somewhere to fix unless you are starting with a blank disk. There's a lot of data inside that machine that can jump settings for various reasons. I don't lose sleep over a few permission errors and subsequent fixes. And here's a freebe;http://localhost:631/ to manage your printers.

  • CUPS doesn't re-read /etc/cups/ppd/ ?

    We're working with a "multiclient installation", basically we tried to spread the CUPS configuration on all Mac's in a computer room. (including a backend).
    We copied /etc/cups/printers.conf to all the boxes, worked great they do know the printer, but as "generic".
    We use a custom PPD file, and copy it to:
    /etc/cups/ppd/Printernamefromcups
    For some reason the printer keeps using the Generic driver and not the newly copied PPD, even after a restart of PrintingServices.
    Anyone able to tell me how I can force CUPS to re-read the PPD?

    Hi
    You could try:
    http://discussions.apple.com/thread.jspa?messageID=4152765&#4152765
    as well:
    http://discussions.apple.com/thread.jspa?messageID=3290222&#3290222
    Might provide more insight into your problem.
    Tony

  • Repaing Permissions = Group Differ on "private/etc/cups", should be 0, grou

    Repaing Permissions = Group Differ on "private/etc/cups", should be 0, groups is 26.
    It says this everytime, even when it was brand new...
    What does this mean? Whay doesn't it go away after repairing?

    This error message has been occurring since Mac OS X 10.5.4 I believe, it's not harmful in any way to the operation of your Mac, so I wouldn't worry about it. I'm sure Apple will have this fixed in a future update.

  • ERROR when repairing permissions: Group differs on "private/etc/cup"

    Hi,
    When I run permissions repair on my Leopard 10.5.4 I get the error message:
    ERROR when repairing permissions: Group differs on "private/etc/cup", Should be 0, group is 26
    Any idea why... It pops up every time I run permissions repair so I don't think it is really getting repaired.
    Thanks.

    Ignore it. It's been reported as a bug and is under investigation.

  • /private/etc/cups folder is missing

    I am working tech support for a college and a faculty member currently working abroad called in with a problem that Microsoft Word for Mac would lock up everytime he tried to save or print a file. I remoted into his machine and I tried the usual suspects and was able to determine that nothing would print at all from any app, and in fact when I went to system preferences and tried to open the printers, it locked up system preferences. Digging deeper, I discovered that I was getting this message in console:
    com.apple.launchd[1] (org.cups.cupsd) Throttling respawn: Will start in 10 seconds
    The error kept repeating. I researched and found this thread:
    https://discussions.apple.com/thread/2151368?start=0&tstart=0
    Which led me to try these terminal commands:
    sudo cp /etc/cups/cupsd.conf /etc/cups/cupsd.conf.old
    sudo cp /etc/cups/cupsd.conf.default /etc/cups/cupsd.conf
    I got an error in terminal that "No such file or directory existed"
    So I checked and sure enough, inside of /private/etc/ there was no folder for cups. Its just gone. I assume that the folder being missing is the root of the problem, but I cant figure out how to get it back for him, especially considering that I am trying to assist him remotely. Any help or advice would be appreciated.

    # Become root
    sudo -s
    cd /private/etc
    # Make the tar archive in /Users/Shared
    tar -cjvf /Users/Shared/cups.tar.bz2 cups
    # Exit being the root user
    exit
    cd /Users/Shared
    # Check the contents of the tar archive
    tar -tvf /Users/Shared/cups.tar.bz2
    drwxr-xr-x  0 root   _lp         0 May  6 17:33 cups/
    dr-x--x--x  0 _lp    admin       0 May  7 18:05 cups/certs/
    -rw-r--r--  0 root   _lp      4524 Jan 20  2012 cups/cupsd.conf
    -rw-r--r--  0 root   _lp      4380 Dec 23  2011 cups/cupsd.conf.O
    -rw-r--r--  0 root   _lp      5978 May 13  2010 cups/cupsd.conf.bak
    -rw-r--r--  0 root   _lp      6091 Jul  6  2011 cups/cupsd.conf.default
    drwxr-xr-x  0 root   _lp         0 May 13  2010 cups/interfaces/
    drwxr-xr-x  0 root   _lp         0 Apr 30 10:10 cups/ppd/
    -rw-------  0 root   _lp      1624 May  6 17:33 cups/printers.conf
    -rw-------  0 root   _lp      1624 May  5 16:53 cups/printers.conf.O
    -rw-r--r--  0 root   _lp       172 May 13  2010 cups/snmp.conf
    -rw-r--r--  0 root   _lp     52273 Jan 13 06:43 cups/ppd/Brother_HL_5140_series.ppd
    -rw-r--r--  0 root   _lp   1072994 Apr 30 10:10 cups/ppd/HP_Photosmart_C4200_series.ppd
    -rw-r--r--  0 root   _lp   1072931 Apr 21 13:08 cups/ppd/HP_Photosmart_C4200_series.ppd.O
    -r--r-----  0 root   admin      32 May  7 18:05 cups/certs/0

  • Missing files from /etc/certificates

    Hi, I have a certificate in my keychain for which I miss the .cert.pem, chain.pem, concat.pem and key.pem files in /etc/certificates.
    This results in a problem in server.app as I can't configure all my web-sites correctly and server.app won't write out the correct config files.
    Any idea how I can create the four files?

    So, I solve this issue and one more. I really can't believe nor understand why Apple is unable to create a server.app that can handle the simpelst things. What trainees are working on it?
    You need two fixes:
    1. http://support.apple.com/kb/TS4539 (OS X Server: Saving a certificate identity to the system keychain does not work with Server services)
    The importan part is, that you need (!!) to reboot your machine. Only than the files are generated. I don't understand what's so hard to generate them right when adding the certificate but that's an other story.
    If you than try to use your now finally available certificate, you are hit by this problem:
    2. https://discussions.apple.com/thread/4266473?start=0&tstart=0 (Strange issue with Dovecot (err 89))
    And yes, that's because server.app comments out the SSL stuff in the dovecot config. Which of course makes a lot of sense if you want to use SSL. The bad sideeffect is, that dovecot won't startup with this wrong config.
    Enough hours lost by this Apple botch...

  • Terminal: unable to read "/private/etc/cups/cups-files.conf" due to errors

    Terminal is giving me the message above every 10 seconds making it impossible to write any lines without the error message breaking up the line.  Any suggestions on how to resolve this issue?

    Back up all data.
    Select
              Shell ▹ New Command
    from the Terminal menu bar. Uncheck the box marked
              Run command inside a shell
    if checked.
    Copy and paste the following line into the text box that opens, then press return:
    mkdir disabled_shell_files
    Close the Terminal window that opens. Repeat with this line:
    mv .profile .bash_history .bash_profile .bashrc .inputrc disabled_shell_files
    Your old shell initialization and history files will be saved in a directory named "disabled_shell_files" at the top level of your home directory. It's normal that some of these files will not exist, and therefore you will get some "no such file" errors.
    Close the window, open a new one, and test.

  • I'm using a Mac OS X (10.9.2) Mtn. Lion (converted to Mavericks) and use Safari for Gmail, my long time email program. Lately I almost cannot use Gmail at all. "Missing Files", "Errors", etc, etc, and can only use it in Basic HTML. HELP!

    I have no idea if the problem is with Safari or with the Gmail files.  I get the msg. "Error' over and over and often "you may have entered the address wrong" (when I KNOW I HAVE NOT) and other msgs. which I do not remember at this time. I'm having to use ''Basic HTML" and that seems to be OK - tho it is insufficient. The "Mail" app in OS X works fine but I cannot tolerate the format and must solve this dilemma. Any suggestions?  I've read the "related issues" section and have not found anything closely related to this issue and would appreciate any suggestions.
    Thanks tons.
    Sam Sayger
    Hernando, MS

    I have no idea if the problem is with Safari or with the Gmail files.  I get the msg. "Error' over and over and often "you may have entered the address wrong" (when I KNOW I HAVE NOT) and other msgs. which I do not remember at this time. I'm having to use ''Basic HTML" and that seems to be OK - tho it is insufficient. The "Mail" app in OS X works fine but I cannot tolerate the format and must solve this dilemma. Any suggestions?  I've read the "related issues" section and have not found anything closely related to this issue and would appreciate any suggestions.
    Thanks tons.
    Sam Sayger
    Hernando, MS

  • What is the original file /private/etc/hosts ?

    Trying to understand I made a bad edit !
    Thanks !

    To set it back, it should read like this. At least, this is the content on my Mac.
    # Host Database
    # localhost is used to configure the loopback interface
    # when the system is booting.  Do not change this entry.
    127.0.0.1             localhost
    255.255.255.255  broadcasthost
    ::1                      localhost
    fe80::1%lo0        localhost
    Don't know if it would make a difference, but the first and fourth sentences ending with "localhost" use a tab character for the space between 127.0.0.1 and fe80::1%lo0. The second and third lines are padded out with space characters.

  • Cannot print PDF files: "/usr/lib/cups/filter/pdftops failed"

    Hi
    I have a HP Deskjet D1460 printer (crap, i know ). I'm using hplip 3.11.1 drivers and CUPS 1.4.6hplip 3.11.1.
    Today i wanted to print a pdf file, and my printer just silently refused to work, like they always do I did some log-scavenging, and found this rather long one:
    E [11/Feb/2011:12:44:36 +0100] [Job 24] Job stopped due to filter errors; please consult the error_log file for details.
    D [11/Feb/2011:12:44:36 +0100] [Job 24] The following messages were recorded from 12:44:30 to 12:44:36
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Adding start banner page "none".
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Queued on "Deskjet_D1400" by "kaszak".
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Auto-typing file...
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Request file type is application/pdf.
    D [11/Feb/2011:12:44:36 +0100] [Job 24] File of type application/pdf queued by "kaszak".
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Adding end banner page "none".
    D [11/Feb/2011:12:44:36 +0100] [Job 24] job-sheets=none,none
    D [11/Feb/2011:12:44:36 +0100] [Job 24] argv[0]="Deskjet_D1400"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] argv[1]="24"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] argv[2]="kaszak"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] argv[3]="przelew.pdf"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] argv[4]="1"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] argv[5]="finishings=3 number-up=1 page-ranges=1 job-uuid=urn:uuid:82dc9ff4-9df7-3643-7cb5-87d5084f99f5 job-originating-host-name=localhost time-at-creation=1297424670 time-at-processing=1297424670 AP_D_InputSlot="
    D [11/Feb/2011:12:44:36 +0100] [Job 24] argv[6]="/var/spool/cups/d00024-001"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[1]="CUPS_DATADIR=/usr/share/cups"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[6]="CUPS_SERVERROOT=/etc/cups"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[7]="CUPS_STATEDIR=/var/run/cups"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[8]="HOME=/var/spool/cups/tmp"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[10]="SERVER_ADMIN=root@localhost"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[11]="SOFTWARE=CUPS/1.4.6"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[12]="TMPDIR=/var/spool/cups/tmp"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[13]="USER=root"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[14]="CUPS_SERVER=/var/run/cups/cups.sock"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[15]="CUPS_ENCRYPTION=IfRequested"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[16]="IPP_PORT=631"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[17]="CHARSET=utf-8"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[18]="LANG=pl_PL.UTF-8"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[19]="PPD=/etc/cups/ppd/Deskjet_D1400.ppd"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[20]="RIP_MAX_CACHE=8m"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[21]="CONTENT_TYPE=application/pdf"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[22]="DEVICE_URI=hp:/usb/Deskjet_D1400_series?serial=TH7B13311X04Y2"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[23]="PRINTER_INFO="
    D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[24]="PRINTER_LOCATION="
    D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[25]="PRINTER=Deskjet_D1400"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[26]="CUPS_FILETYPE=document"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[27]="FINAL_CONTENT_TYPE=printer/Deskjet_D1400"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Started filter /usr/lib/cups/filter/pdftops (PID 2793)
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Started filter /usr/lib/cups/filter/foomatic-rip-hplip (PID 2794)
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Started backend /usr/lib/cups/backend/hp (PID 2795)
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Started filter pdftops (PID 2796)
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Started filter pstops (PID 2797)
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Page = 612x792; 18,36 to 594,783
    D [11/Feb/2011:12:44:36 +0100] [Job 24] slow_collate=0, slow_duplex=0, slow_order=0
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Before copy_comments - %!PS-Adobe-3.0
    D [11/Feb/2011:12:44:36 +0100] [Job 24] %!PS-Adobe-3.0
    D [11/Feb/2011:12:44:36 +0100] [Job 24] %%LanguageLevel: 3
    D [11/Feb/2011:12:44:36 +0100] [Job 24] %%DocumentSuppliedResources: (atend)
    D [11/Feb/2011:12:44:36 +0100] [Job 24] %%DocumentMedia: plain 596 842 0 () ()
    D [11/Feb/2011:12:44:36 +0100] [Job 24] %%BoundingBox: 0 0 596 842
    D [11/Feb/2011:12:44:36 +0100] [Job 24] %%Pages: 1
    D [11/Feb/2011:12:44:36 +0100] [Job 24] %%EndComments
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Before copy_prolog - %%BeginDefaults
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Before copy_setup - %%BeginSetup
    D [11/Feb/2011:12:44:36 +0100] [Job 24] foomatic-rip version $Revision=3.0.2.131$ running...
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Parsing PPD file ...
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Added option ColorSpace
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Added option Resolution
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Added option PageSize
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Added option Model
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Added option PrintoutMode
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Added option Quality
    D [11/Feb/2011:12:44:36 +0100] [Job 24] *cupsFilter: "application/vnd.cups-postscript 100 foomatic-rip-hplip"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] *cupsFilter: "application/vnd.cups-pdf 0 foomatic-rip-hplip"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Added option PageRegion
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Added option ImageableArea
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Added option PaperDimension
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Added option Font
    D [11/Feb/2011:12:44:36 +0100] [Job 24]
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Parameter Summary
    D [11/Feb/2011:12:44:36 +0100] [Job 24] -----------------
    D [11/Feb/2011:12:44:36 +0100] [Job 24]
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Spooler: cups
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Printer: Deskjet_D1400
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Shell: /bin/sh
    D [11/Feb/2011:12:44:36 +0100] [Job 24] PPD file: /etc/cups/ppd/Deskjet_D1400.ppd
    D [11/Feb/2011:12:44:36 +0100] [Job 24] ATTR file:
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Printer model: HP Deskjet d1400 Series hpijs, 3.11.1
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Job title: przelew.pdf
    D [11/Feb/2011:12:44:36 +0100] [Job 24] File(s) to be printed:
    D [11/Feb/2011:12:44:36 +0100] [Job 24] <STDIN>
    D [11/Feb/2011:12:44:36 +0100] [Job 24]
    D [11/Feb/2011:12:44:36 +0100] [Job 24] GhostScript extra search path ('GS_LIB'): /usr/share/cups/fonts
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Pondering option 'finishings=3'
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Unknown option finishings=3.
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Pondering option 'number-up=1'
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Unknown option number-up=1.
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Pondering option 'page-ranges=1'
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Unknown option page-ranges=1.
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Pondering option 'job-uuid=urn:uuid:82dc9ff4-9df7-3643-7cb5-87d5084f99f5'
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Unknown option job-uuid=urn:uuid:82dc9ff4-9df7-3643-7cb5-87d5084f99f5.
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Pondering option 'job-originating-host-name=localhost'
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Unknown option job-originating-host-name=localhost.
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Pondering option 'time-at-creation=1297424670'
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Unknown option time-at-creation=1297424670.
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Pondering option 'time-at-processing=1297424670'
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Unknown option time-at-processing=1297424670.
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Pondering option 'AP_D_InputSlot='
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Unknown option AP_D_InputSlot=.
    D [11/Feb/2011:12:44:36 +0100] [Job 24]
    D [11/Feb/2011:12:44:36 +0100] [Job 24] ================================================
    D [11/Feb/2011:12:44:36 +0100] [Job 24]
    D [11/Feb/2011:12:44:36 +0100] [Job 24] File: <STDIN>
    D [11/Feb/2011:12:44:36 +0100] [Job 24]
    D [11/Feb/2011:12:44:36 +0100] [Job 24] ================================================
    D [11/Feb/2011:12:44:36 +0100] [Job 24]
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Reading PostScript input ...
    D [11/Feb/2011:12:44:36 +0100] [Job 24] --> This document is DSC-conforming!
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Found: %RBINumCopies: 1
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Job claims to be DSC-conforming, but "%%BeginProlog" was missing before first line with another "%%Begin..." comment (is this a TeX/LaTeX/dvips-generated PostScript file?). Assuming start of "Prolog" here.
    D [11/Feb/2011:12:44:36 +0100] [Job 24]
    D [11/Feb/2011:12:44:36 +0100] [Job 24] -----------
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Found: %%BeginProlog
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Found: %%EndProlog
    D [11/Feb/2011:12:44:36 +0100] [Job 24]
    D [11/Feb/2011:12:44:36 +0100] [Job 24] -----------
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Found: %%BeginSetup
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Found: %%BeginFeature: *PageSize Letter
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Option: PageSize=Letter --> Setting option
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Found: %% FoomaticRIPOptionSetting: PageSize=Letter
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Option: PageSize=Letter --> Setting option
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Found: %%BeginFeature: *PrintoutMode Normal
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Option: PrintoutMode=Normal --> Setting option
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Found: %% FoomaticRIPOptionSetting: PrintoutMode=Normal
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Option: PrintoutMode=Normal --> Setting option
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Found: %%BeginFeature: *Quality FromPrintoutMode
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Option: Quality=FromPrintoutMode --> Setting option
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Found: %% FoomaticRIPOptionSetting: Quality=@PrintoutMode
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Option: Quality=FromPrintoutMode --> Setting option
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Before page loop - %%Page: 1 1
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Copying page 1...
    D [11/Feb/2011:12:44:36 +0100] [Job 24] pagew = 576.0, pagel = 747.0
    D [11/Feb/2011:12:44:36 +0100] [Job 24] bboxx = 0, bboxy = 0, bboxw = 612, bboxl = 792
    D [11/Feb/2011:12:44:36 +0100] [Job 24] PageLeft = 18.0, PageRight = 594.0
    D [11/Feb/2011:12:44:36 +0100] [Job 24] PageTop = 783.0, PageBottom = 36.0
    D [11/Feb/2011:12:44:36 +0100] [Job 24] PageWidth = 612.0, PageLength = 792.0
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Found: %%EndSetup
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Inserting PostScript code for CUPS' page accounting
    D [11/Feb/2011:12:44:36 +0100] [Job 24]
    D [11/Feb/2011:12:44:36 +0100] [Job 24] -----------
    D [11/Feb/2011:12:44:36 +0100] [Job 24] New page: 1 1
    D [11/Feb/2011:12:44:36 +0100] [Job 24]
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Found: %%BeginPageSetup
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Inserting option code into "PageSetup" section.
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Found: %%EndPageSetup
    D [11/Feb/2011:12:44:36 +0100] [Job 24] End of page header
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Stopping search for page header options
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Found: S
    D [11/Feb/2011:12:44:36 +0100] [Job 24] --> Output goes directly to the renderer now.
    D [11/Feb/2011:12:44:36 +0100] [Job 24]
    D [11/Feb/2011:12:44:36 +0100] [Job 24]
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Starting renderer
    D [11/Feb/2011:12:44:36 +0100] [Job 24] renderer PID kid4=2802
    D [11/Feb/2011:12:44:36 +0100] [Job 24] renderer command: gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -dDEVICEWIDTHPOINTS=612 -dDEVICEHEIGHTPOINTS=792 -sDeviceManufacturer="HEWLETT-PACKARD" -sDeviceModel="deskjet 3320" -r300 -sIjsParams=Quality:Quality=0,Quality:ColorMode=2,Quality:MediaType=0,Quality:PenSet=1 -dIjsUseOutputFD -sOutputFile=- -
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Starting process 2803: "gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -dDEVICEWIDTHPOINTS=6..."
    D [11/Feb/2011:12:44:36 +0100] [Job 24] JCL: <job data>
    D [11/Feb/2011:12:44:36 +0100] [Job 24]
    D [11/Feb/2011:12:44:36 +0100] [Job 24] PID 2796 (pdftops) exited with no errors.
    D [11/Feb/2011:12:44:36 +0100] [Job 24] prnt/hpijs/hpijs.cpp 650: WARNING: color pen has low ink
    D [11/Feb/2011:12:44:36 +0100] [Job 24] STATE: +marker-supply-low-warning
    D [11/Feb/2011:12:44:36 +0100] [Job 24] GPL Ghostscript 9.00: Unrecoverable error, exit code 1
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Process 2803 ending: "gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -dDEVICEWIDTHPOINTS=6..."
    D [11/Feb/2011:12:44:36 +0100] [Job 24] renderer return value: 1
    D [11/Feb/2011:12:44:36 +0100] [Job 24] renderer received signal: 1
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Process dying with "Possible error on renderer command line or PostScript error. Check options.", exit stat: 3
    D [11/Feb/2011:12:44:36 +0100] [Job 24] error: Nie ma takiego pliku ani katalogu (2)
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Cleaning up ...
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Killing process 2802 (KID4) with signal 15
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Process dying with "Caught termination signal: Job canceled", exit stat: 0
    D [11/Feb/2011:12:44:36 +0100] [Job 24] error: Przerwany potok (32)
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Cleaning up ...
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Killing process 2801 (KID3) with signal 15
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Process dying with "Caught termination signal: Job canceled", exit stat: 0
    D [11/Feb/2011:12:44:36 +0100] [Job 24] error: (0)
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Cleaning up ...
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Process dying with "Caught termination signal: Job canceled", exit stat: 0
    D [11/Feb/2011:12:44:36 +0100] [Job 24] error: Przerwane wywołanie systemowe (4)
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Cleaning up ...
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Killing process 2802 (KID4) with signal 15
    D [11/Feb/2011:12:44:36 +0100] [Job 24]
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Closing foomatic-rip.
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Killing process 2802 (KID4) with signal 9
    D [11/Feb/2011:12:44:36 +0100] [Job 24]
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Closing foomatic-rip.
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Killing process 2801 (KID3) with signal 9
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Caught termination signal: Job canceled
    D [11/Feb/2011:12:44:36 +0100] [Job 24]
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Closing foomatic-rip.
    D [11/Feb/2011:12:44:36 +0100] [Job 24] prnt/backend/hp.c 839: ERROR: null print job total=0
    D [11/Feb/2011:12:44:36 +0100] [Job 24] PID 2797 (pstops) crashed on signal 13!
    D [11/Feb/2011:12:44:36 +0100] [Job 24] End of messages
    D [11/Feb/2011:12:44:36 +0100] [Job 24] printer-state=3(idle)
    D [11/Feb/2011:12:44:36 +0100] [Job 24] printer-state-message="/usr/lib/cups/filter/pdftops failed"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] printer-state-reasons=marker-supply-low-warning
    E [11/Feb/2011:12:45:56 +0100] [Job 22] Stopping unresponsive job!
    E [11/Feb/2011:12:49:41 +0100] [Job 24] Stopping unresponsive job!
    To be honest, it looks more like a Chinese poem rather than error log. I found this part the most disturbing:
    D [11/Feb/2011:12:44:36 +0100] [Job 24] STATE: +marker-supply-low-warning
    D [11/Feb/2011:12:44:36 +0100] [Job 24] GPL Ghostscript 9.00: Unrecoverable error, exit code 1
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Process 2803 ending: "gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -dDEVICEWIDTHPOINTS=6..."
    D [11/Feb/2011:12:44:36 +0100] [Job 24] renderer return value: 1
    D [11/Feb/2011:12:44:36 +0100] [Job 24] renderer received signal: 1
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Process dying with "Possible error on renderer command line or PostScript error. Check options.", exit stat: 3
    D [11/Feb/2011:12:44:36 +0100] [Job 24] error: Nie ma takiego pliku ani katalogu (2)
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Cleaning up ...
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Killing process 2802 (KID4) with signal 15
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Process dying with "Caught termination signal: Job canceled", exit stat: 0
    D [11/Feb/2011:12:44:36 +0100] [Job 24] error: Przerwany potok (32)
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Cleaning up ...
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Killing process 2801 (KID3) with signal 15
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Process dying with "Caught termination signal: Job canceled", exit stat: 0
    D [11/Feb/2011:12:44:36 +0100] [Job 24] error: (0)
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Cleaning up ...
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Process dying with "Caught termination signal: Job canceled", exit stat: 0
    D [11/Feb/2011:12:44:36 +0100] [Job 24] error: Przerwane wywołanie systemowe (4)
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Cleaning up ...
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Killing process 2802 (KID4) with signal 15
    Anyone had such problems before? Just don't tell me this cursed device demands a sacrifice from freshly produced virgin paper sheets to chew on.
    Other non-pdf documents print succesfully.

    just got hit with thie same error on my canon printer, and I was told I should try reinstalling the printer (not sure if that's meant for the driver or the actual printer in CUPS, but I intend to try both...

  • Printing Stopped - The file '/private/var/spool/cups/tmp/..... could not be ...

    I can't get anything to print.
    I have reinstalled the OS Yosemite and reinstalled the Kyocera printer driver and also deleted and reassigned the default printer... no luck.
    I also repaired permissions several times. Also ran ONYX to run maintenance scripts and repair permissions again etc... still no luck.
    I checked my printer IP address  and it is set the same as another workers computer next to me. so the settings are not the issue either.
    ---- puzzled.

    The print system reset did not work.
    the error log says this...
    D [30/Apr/2015:14:31:23 -0500] [Job 7] PID 2104 (/usr/libexec/cups/filter/kyoprefilter_C) exited with no errors.
    D [30/Apr/2015:14:31:23 -0500] [Job 7] PID 2107 (/usr/libexec/cups/filter/kyofilter_C) exited with no errors.
    D [30/Apr/2015:14:31:23 -0500] [Job 7] PID 2108 (/usr/libexec/cups/backend/lpd) exited with no errors.
    D [30/Apr/2015:14:31:23 -0500] [Job 7] Set job-printer-state-message to "The file ‘/private/var/spool/cups/tmp/008395542c9f5’ could not be opened.", current level=ERROR
    D [30/Apr/2015:14:31:23 -0500] [Job 7] PID 2105 (/usr/libexec/cups/filter/cgpdftops) stopped with status 1.
    D [30/Apr/2015:14:31:23 -0500] [Job 7] Hint: Try setting the LogLevel to "debug" to find out more.
    D [30/Apr/2015:14:31:23 -0500] [Job 7] The print file is empty.
    D [30/Apr/2015:14:31:23 -0500] [Job 7] PID 2106 (/usr/libexec/cups/filter/pstops) stopped with status 1.
    D [30/Apr/2015:14:31:23 -0500] [Job 7] Hint: Try setting the LogLevel to "debug" to find out more.
    D [30/Apr/2015:14:31:23 -0500] [Job 7] End of messages
    D [30/Apr/2015:14:31:23 -0500] [Job 7] printer-state=3(idle)
    D [30/Apr/2015:14:31:23 -0500] [Job 7] printer-state-message="The file ‘/private/var/spool/cups/tmp/008395542c9f5’ could not be opened."
    D [30/Apr/2015:14:31:23 -0500] [Job 7] printer-state-reasons=none

  • Private/etc/apache2/extra directory is missing

    I cannot find this directory, nor the files that are supposed to be in this directory, it is missing under apache2. I need to be able to edit/create httpd-vhosts.conf
    It is not hidden. I am at my wits end here. Do I need to install or copy this from another server? Both Mac Mini servers I have access to are missing this directory.
    Thank you in advance

    I am experiencing on brand new Mac Mini OS X Server (10.6.7),  I reinstalled Mac OS X Snow Leopard Server from include DVDs and went through the Software Update process.
    I have Apache2 up and running, but there is no /private/etc/apache2/extra folder.
    I need to configure Apache2 for SSL and following all web instructions are halted with this. 
    I am using
    apachectl -version
    Server version: Apache/2.2.17 (Unix)
    Server built:   Dec  1 2010 09:58:15
    Here are my directory contents:
    eis:apache2 admin$ ls -l
    total 208
    -r--r--r--  1 root  wheel  10594 Dec 17  2009 ReadMe.txt
    -rwx------  1 root  admin  71696 Dec  1 13:05 getsslpassphrase
    -rw-r--r--  1 root  wheel  55183 Apr 18 11:46 httpd.conf
    -r--r--r--  1 root  wheel  60422 Dec 17  2009 httpd.conf.default
    -rw-r--r--  1 root  wheel    505 Mar 14  2010 httpd_directory.conf
    -rw-r--r--  1 root  wheel   2052 Dec  2  2009 httpd_emailrules_required.conf
    -rw-r--r--  1 root  wheel   1250 Mar 14  2010 httpd_groups.conf
    -rw-r--r--  1 root  wheel    486 Dec 17  2009 httpd_mailman.conf
    -r--r--r--  1 root  wheel    486 Dec 17  2009 httpd_mailman.conf.default
    -rw-r--r--  1 root  wheel    386 Mar 10  2010 httpd_podcastproducer_availability.conf
    -rw-r--r--  1 root  wheel   2003 Jun 25  2010 httpd_pwdchange_required.conf
    -rw-r--r--  1 root  wheel    576 Jan 26  2010 httpd_squirrelmail.conf
    -rw-r--r--  1 root  wheel    576 Jan 26  2010 httpd_squirrelmail_default.conf
    -rw-r--r--  1 root  wheel   4923 Mar 14  2010 httpd_teams_required.conf
    -rw-r--r--  1 root  wheel   1170 Mar 14  2010 httpd_users.conf
    -rw-r--r--  1 root  wheel    660 Mar 14  2010 httpd_webcalendar.conf
    -rw-r--r--  1 root  wheel  12958 Dec  9  2009 magic
    drwxr-xr-x  3 root  wheel    102 Dec  1 13:00 original
    drwxr-xr-x  2 root  wheel     68 Apr 13 16:50 proxy_sites
    drwxr-xr-x  2 root  wheel     68 Apr 13 16:50 proxy_sites_disabled
    -rw-------  1 root  wheel   1183 Apr 14 12:56 servermgr_web_apache2_config.plist
    -r--------  1 root  wheel    673 Dec 17  2009 servermgr_web_apache2_config.plist.default
    drwxr-xr-x  6 root  wheel    204 Apr 14 12:56 sites
    drwxr-xr-x  4 root  wheel    136 Apr 14 12:56 sites_disabled
    drwx------  2 root  wheel     68 Dec 17  2009 ssl.crt
    drwx------  2 root  wheel     68 Dec 17  2009 ssl.key
    drwxr-xr-x  2 root  wheel     68 Dec  9  2009 users
    -rw-r--r--  1 root  wheel   1639 Dec 17  2009 workers.properties
    -rw-r--r--  1 root  wheel   1639 Dec 17  2009 workers.properties.default
    Any help would be appreciated.  I will update if I figure this out

Maybe you are looking for

  • IPhone 5 iOS7 - Sending text to multiple recipients.

    I have recently upgraded from my trusty iPhone 3GS to an iPhone 5 with iOS7. The phone is locked to the UK O2 Network. When abroad multiple recipient text could be sent incurring a European Text Message Cost of 6p per recipient. So far so good. Idid

  • InDesign CS6, Formulare - Wortzahl für ein Feld definieren / Define word count for a form field

    Ich habe folgende Frage: Ist es mit inDesign CS6 möglich, ein interaktives PDF zu kreieren, in dem die zulässige Wortzahl in einem Feld genau definiert wird? Im speziellen Fall möchte ich ein Eingabefeld auf eine DIN A4 Seite setzen, welches exakt 35

  • Error message "resource does not exist"

    C6; have unistalled and reinstalled ovi store three times; now I get into the store, but when attempting to download app, get error message "resource does not exist". what is that???

  • Data in JSP and servlet

    Hi all, Now i have a jsp page for register when user summit at form. I would like to go to the another jsp page that show user data. After that if user confirm data the form will throw data to servlet. What should i do in this solution.How can i pass

  • Export .txt format

    I have a special need to convert and export short segments of audio data (less than one million data points) to Microsoft Excel for exploratory detailed waveform analysis. File format .txt is a satisfactory export format for the job.  Several years a