Missing libraries,network and computer in file explorer

Hi,
I have a windows server 2012r2 and this one is missing the libraries,network and the computer icons
how to get them back?
Aniel

Hi,
Try to use “sfc /scannow” command to scan all protected system files and replaces incorrect versions with correct Microsoft versions.
Or you may try to reinstall user interface feature. Detailed information reference:
http://blogs.technet.com/b/yungchou/archive/2012/07/18/windows-server-2012-installation-options.aspx
Does this problem occur at the beginning of WS 2012 R2 was installed?
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]
No the problem wasn't there when I installed the server.
I will try and give you feedback.
Regards,
Aniel
Aniel

Similar Messages

  • Can't Access One of My Network Computers via Windows (File) Explorer

    I've just installed a new router (Linksys EA3500 Dual Band) to replace my old (Linksys WRT100), but can't imagine how that could cause this trouble, except that prior to installing the new router, all worked properly.  I have three Workgroup computers
    on my network, one running Win 7 Ultimate 64bit (call it Tower-755, an older laptop upstairs running Win 7 Pro 32bit (call it MommaDell), and a super laptop running Win 7 Pro 64bit (Call it M6600).  On Tower-755 I have a mirrored Raid1 drive - call
    it Z: - that I share over the net (i.e. Everyone = Read/Write).
    Since installing the new router, when I open File Explorer on M6600 or MommaDell, I can see - in the search pane (under Network) - all three computers, and when I click on MommaDell, its shared folder is accessible, but when I click on Tower-755
    I get an error saying, "Windows cannot access
    \\Tower-755, yet I can ping it successfully from a command prompt.
    However, when I open File Explorer on Tower-755, although I can see all three computers in the search pane (under Network), I can't access any of the three (including Tower-755 itself); I get the same error message, although I CAN ping them from a command
    prompt.
    Also, and I'm not sure if this related, in the search pane under HomeGroup on all three computers, I can only see MommaDell.
    I've checked and double checked all my router settings, including the IP Address range (192.168.1.2 - 51).  I also have a Domain Controller server with two joined workstations on the net, so I have a static IP in order to be able to access the server
    and/or workstations remotely when we travel.
    That's my story and I'm stuck with it, but I'd sure be grateful for any help with this mess.
    Capt. Dinosaur

    Hi Capt,
    In order to help you analyze your issue, we need confirm some situations.
    1. Did these 3 computers all join the same HomeGroup or Workgroup?
    Yes
    2. Domain Controller server with two joined workstations you mentioned, did it mean two of these 3 computer joined the domain environment?
    No.  Those are separate computers in their own domain, just using the same network.
    3. Did you ping via IP address or computer name?
    Both, but this morning something is different. 
      a.  MommaDell and M6600 can ping each other both by IP and Name, but can't ping Tower-755 either way.
      b.  Tower CAN ping both MommaDell and M6600 both ways.
    According to your description,
    Tower cannot ping MommaDell and M6600.
    No, Tower CAN ping both MommaDell AND M6600 both by ip and name.
    MommaDell can ping Tower.
    M6600 can ping Tower.
    Both of the above was true yesterday, but not this morning.
    Please check if MommaDell and M6600 could ping each other.
    Yes they can
    And make sure all of them turn on the network discovery and turn off the firewall temporarily for test:
    Network Discovery is ON in all three machines, and Windows firewall is always off because I have ZoneAlarm on all three machines.
    Enable or disable network discovery
    Which?
    http://windows.microsoft.com/en-in/windows/enable-disable-network-discovery#1TC=windows-7
    If it doesn't resolve, please post every computer's ipconfig /all output here for analysis.
    it's 7:30 and I have to be out until 2:30.  I'll do the posting then, and thanks for the help.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Capt. Dinosaur

  • Envy 17-j020us, cannot cut/copy and paste within file explorer

    I can cut/copy and paste url's and text from word, etc, but I am unable to cut/copy and paste files within file explorer windows. I have tried running malwarebytes and virus programs. HP support has tried remote access to find the problem unsuccessfully. Is there any other option besides doing a factory reset or restore point? Thanks in advance for any help.
    This question was solved.
    View Solution.

    Hi jdavis33811,
    Have you tried all three methods of cutting and pasting? Using the keyboard shortcuts CRTL-X and CTRL-V, right click the file and selecting cut and then using the file explorer ribbon / File menu.
    If you have tried all three the next thing to try is a Clean Boot to see if something is in the background blocking the command. A clean boot loads Windows with minimal software and drivers. This Microsoft Support link will show you how to do it.
    Once you have performed the clean boot try all three methods of cutting and pasting. If it works the next step is going back to msconfig (see Microsoft link above) and enable half of the services you shutoff to do the Clean Boot. Then try cutting and pasting again. Keep enabling half of the remaining services until you can't cut and paste then disable half of the services you just enabled. Do this until you pinpoint what service caused the issue.
    If after all that you are still having a problem then the next step would backing up your files onto an external hard drive or USB flash drive and then doing a full System Recovery.
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • Unable to view images and videos on file explorer ...

    hi. Im using a nokia E6. Im unable to view my images and videos taken using the phone camera if i go through the file explorer. But im a ble to view them through the gallery. Can anyone help me out here?. I've tried resetting the system. No change.

    hi, have you tried reinstalling the current firmware thru Nokia Suite on PC?

  • Please help.  Music files missing from itunes and computer!

    I know that this isn't exactly a new issue, but I have scanned the discussions and nothing that I have read seems to help. My son has a nano (4th gen). He isn't sure but he thinks that maybe he disconnected his ipod before a sync was complete or something because all the music was deleted from it. He's not positive that's what happened but that's his best guess. No problem -- thought we'd just pull songs over again to it from our library. However, when we try to do this, on about 50% of the songs he wants (all were purchased, not from CDs) there are exclamation points next to the songs when we try to drag them and it says the file can't be found. I have looked in the itunes library on our computer and while I can find the libraries, they also don't have these specific songs we are looking for. I've tried to search and I just come up empty. Is there anything we can do beside buy the songs again? There are about 16 songs or so. A couple of them I have on my itouch. Could I somehow transfer the couple of songs to the computer? And would that work to get them to his ipod? Any help would be greatly appreciated.

    +It appeared to do that as there are now duplicates in our library, but when I tried to drag the new song to the ipod, that darn exclamation appeared again and the song wouldn't transfer.+
    It's easy to get rid of the duplicates. iTunes menu > View > View Options
    Check the Date Added box, then click on the column name Date Added twice. Eveything you added to day will be at the top.
    Then click File > Show Duplicates and only delte the one from today.
    Do NOT delete both duplicates, or the song will be entirely gone.
    As for dragging songs to the ipod, it has to be set for "manually manage music" for that to work. I don't understand about the exclamation point showing up again, unless you were dragging the 'old' reference that got deleted. Tyr dragging over the copy from today.

  • Why does the local network and computer name keep changing?

    After upgrading to Yosemit the local network name and computername on my iMAC keep changes link:
    Mycomputer-1
    Mycomputer-2
    Mycomputer-3
    Why?
    I have tried to change it back in sharing and network locations.
    Is this also the reason the my iPhone cannot find my iPhone often cannot find my iMac when I will sync it? Then I have to restart the iPhone and iTunes on the computer. This happens very very often.
    Maybe it also linked to these errors which the log is full of - many every minute:
    19/10/14 12.11.09,522 discoveryd[53]: Basic DNSResolver  dropping message because it doesn't match the one sent Port:0 MsgID:256
    19/10/14 12.11.09,543 discoveryd[53]: Basic DNSResolver  dropping message because it doesn't match the one sent Port:0 MsgID:12856
    19/10/14 12.11.09,561 discoveryd[53]: Basic DNSResolver  dropping message because it doesn't match the one sent Port:0 MsgID:0
    19/10/14 12.11.09,565 discoveryd[53]: Basic DNSResolver  dropping message because it doesn't match the one sent Port:0 MsgID:44032
    I think the is some bug/clash between bonjour and other network protocols. That is only a guess.

    After resetting the computer name and local host name to the correct name without the number I also shotdown my iMac, my AppleTV, my iPhone, my iPad and then rebooted my Airport/Time capsule it seemed to work at least for several days. But yesterday I discovered that my Apple TV now also has changed name to Apple TV (2).
    I logged into iCloud.com to see my devices and here it was really wired. My Apple TV was called Apple TV (2) and my iMac also had (2) after the name. Then I checked it on the iMac but here it was correct! Why can it have one name on the iCloud and another on the computer.
    I restarted both the iMac, Apple TV and Airport Time capsule then everything was correct also on iCloud.com.
    But today the iMac was called the name (2) again on the iMac. And now the local host name also had -2 after the name. It has not always been both names that has changed. That is really wired. And today Wifi was not working on the iMac after wake from sleep. I changed the name back and rebooted again also the Airport Time capsule. Now it is working again.
    The log is still full of this messages:
    02/11/14 19.22.13,186 discoveryd[53]: Basic DNSResolver  dropping message because it doesn't match the one sent Port:0 MsgID:1901
    02/11/14 19.22.25,738 discoveryd[53]: Basic DNSResolver  dropping message because it doesn't match the one sent Port:0 MsgID:34051
    02/11/14 19.22.25,758 discoveryd[53]: Basic DNSResolver  dropping message because it doesn't match the one sent Port:0 MsgID:12342
    02/11/14 19.22.25,900 discoveryd[53]: Basic DNSResolver  dropping message because it doesn't match the one sent Port:0 MsgID:34051
    02/11/14 19.22.25,919 discoveryd[53]: Basic DNSResolver  dropping message because it doesn't match the one sent Port:0 MsgID:1901
    02/11/14 19.22.27,636 discoveryd[53]: Basic DNSResolver  dropping message because it doesn't match the one sent Port:0 MsgID:28772
    02/11/14 19.22.27,683 discoveryd[53]: Basic DNSResolver  dropping message because it doesn't match the one sent Port:0 MsgID:27693
    02/11/14 19.22.27,714 discoveryd[53]: Basic DNSResolver  dropping message because it doesn't match the one sent Port:0 MsgID:28533
    02/11/14 19.22.49,833 discoveryd[53]: Basic DNSResolver  dropping message because it doesn't match the one sent Port:0 MsgID:29281
    02/11/14 19.22.49,866 discoveryd[53]: Basic DNSResolver  dropping message because it doesn't match the one sent Port:0 MsgID:28528
    The name is not the only problem. Often itunes will not find my iPhone and iPad. Then i need to close iTunes and restart the iPhone and iPad then it works for some time.
    And the iPhone and AppleTV will not always wake the iMac from sleep. I am wondering if the is linked to the changing of name.
    I have seen by googling that it can be related to a sleep proxy problem so it seems like that here is two devices on the net with the same name that is why name is changing, but to know this do not help me to solve the problem. I have also seen all the suggestion to turn almost every services off on the computer, but again I it is not a solution and I have the iMac and devises to use the functionality not to shot everything down. So I do not really understand people saying turn off itunes, turn off blueboth, and turn off this and that.
    Apple must soon come with a real solution. We are really many people have these problem since we upgraded to Yosemite and iOS 8.
    I have also listed some of the iTunes errors from the log below:
    02/11/14 19.24.48,160 com.apple.xpc.launchd[1]: (com.apple.quicklook[1364]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.quicklook
    02/11/14 19.24.52,279 Console[1368]: Failed to connect (_consoleX) outlet from (NSApplication) to (ConsoleX): missing setter or instance variable
    02/11/14 19.25.06,907 iTunes[480]: Entered:_AMMuxedDeviceDisconnected, mux-device:5
    02/11/14 19.25.06,908 iTunes[480]: Entered:__thr_AMMuxedDeviceDisconnected, mux-device:5
    02/11/14 19.25.06,908 iTunes[480]: tid:17d8b - Mux ID not found in mapping dictionary
    02/11/14 19.25.06,908 iTunes[480]: tid:17d8b - Can't handle disconnect with invalid ecid
    02/11/14 19.30.19,234 com.apple.usbmuxd[56]: _SendAttachNotification Device 30:f7:c5:30:b8:2b@fe80::32f7:c5ff:fe30:b82b._apple-mobdev2._tcp.local. has already appeared on interface 5. Suppressing duplicate attach notification.
    02/11/14 19.30.22,192 soagent[429]: Can't allocate SOHelper <SOMessageHelper: 0x7f9053a102c0> inside com.apple.soagent
    02/11/14 19.30.54,871 iTunes[480]: Entered:_AMMuxedDeviceDisconnected, mux-device:6
    02/11/14 19.30.54,871 iTunes[480]: Entered:__thr_AMMuxedDeviceDisconnected, mux-device:6
    02/11/14 19.30.54,871 iTunes[480]: tid:1a23b - Mux ID not found in mapping dictionary
    02/11/14 19.30.54,871 iTunes[480]: tid:1a23b - Can't handle disconnect with invalid ecid
    02/11/14 19.32.06,137 com.apple.usbmuxd[56]: _SendAttachNotification Device 30:f7:c5:30:b8:2b@fe80::32f7:c5ff:fe30:b82b._apple-mobdev2._tcp.local. has already appeared on interface 5. Suppressing duplicate attach notification.

  • Itunes crashed and I have all my music on my Ipod and computer in files that will not all open, that is irreplacable. I do not remember ever using a encyrtion code so I am confused on saving my music.what do I do?

    Very Frustrated and Wasted Money Please Help Me...... Itunes crashed and all of my libraries would not download, the songs that did came back 3/4 times which caused me to put everything on my new Hard Drive,I am have a bunch of files and libraries from Itunes with music that will not upload back to Itunes and I have a bunch on my IPOD that is irreplacable....On top of all these this I do not remember my encryption code but never remember locking it either. Please tell me what to do to save my music or reset the code and do a new one and how do I save this music,I see it on my library when I plug it up.Also what file do I look for for all the purchased music I had? Also my Remote acts up which never happened to me as well...

    What do you mean by encryption code?
    - Do yu mean the for some reason when you want to restore from backup iTunes asks for the password?
    - Do you mean that it has a screen-lock passcode and you do not remember the passscode?
    Please provide more clear information. I do not really understand your poblem. I can't tell whee the music is, or what will not "upload".

  • Missing "Content-Disposition" and attachment's file name

    We're testing OCFO 10.1.3.0.6 with MS Outlook 2003 and found some problems when message with attachments is received.
    If the attachment's file name is encoded and the body part looks like:
    Content-Type: application/msword; name="=?utf-8?B?encoded name?="
    Content-Disposition: attachment; filename="=?utf-8?B?encoded name?="
    everything is OK - the message is displayed as expected and the attachment's file name is decoded right.
    But, if Content-Disposition field is missing, the attachment's file name is not decoded - it's displayed as "=?utf-8?B?encoded name?=" (the name is obviously taken from Content-Type's name parameter), we loose information about file's type and we can't open the attachment.
    It seems that MS Outlook (without OCFO) is "smart" enough to decode Content-Type's name parameter as file name in the absence of Content-Disposition field. The same is true for Thunderbird.
    Any ideas?

    Actually the "name" parameter in Content-Type was declared depricated in RFC 1521 in september 1993, (now belongs to Content-Disposition) so they can be excused in a way....
    Message was edited by:
    user464123

  • Missing Task App and MP3 Music Files

    Hello! I've reset my phone to factory default recently. I can't seem to find the Task App as well as the pre-loaded MP3 music files that can be found in the Walkman app when you bought the phone.
    Any idea where I can download these?
    Thanks!

    Task app should be downloadable from google play or come with a future update.Did you try that?About the songs,you should tell someone who has the compact to send them to you.
    All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

  • Offline Files - Where is the "Work Online" Button in File Explorer (when connected to company network)?

    I have windows 8.1 Pro.  I connected a network drive and was able to set up some of the contents as available offline.  When I connect to the VPN, however, and go into file explorer - for that drive, it indicates the state as "Offline (background
    sync)" and will not allow me to make other folders/files under the mapped drive as available offline or to open any of these.  How can I change this state so I am working online?  (Also, sync is not running).  Thank you for your help.

    Hello Liz Braden,
    Do you mean that when you use VPN and can’t sync offline folder?
    If yes, please take a look at the following thread similar to this issue.
    https://social.technet.microsoft.com/Forums/windows/en-US/21042eeb-434b-4864-afbc-22948d4d02e1/offline-file-sync-over-a-vpn?forum=w7itpronetworking
    Try to disable the "Configure slow-link mode" for Offline Files:
    Computer Configuration\Administrative Templates\Network\Offline Files\Configure slow-link mode
    Best regards,
    Fangzhou CHEN
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • How can I browse my network and play my media files?

    I installed a free file explorer on my Android tablet. I can easily browse my network shares and access all my media content. I can play my movies, music, TVshows, anything by just browsing to the folder and selecting the file to play. It took me 5 minutes to figure this out on my Android tablet. I've been trying to do this for about 3 hours on my new ipad 3. I have yet to even find a file browser type app. Please don't tell me there is no way you can do this with an ipad. There is no way to play all your multi-media files with my very expensive ipad. I have so much media content I would love to access via my ipad, but I can't. Has Apple done this on purpose to lock down their devices so users can't do anything flexible? This is a HUGE difference between Android / iOS.
    Also, I'm able to visit music.google.com on my Android to play my music. Besides iTunes, does Apple have a way the user can access a simple website and play their music files? I'm finding all this very troublesome and such a limited factor with Ipad. Please help!
    If it ends up that Apple's brand new ipad can't easily browse a network and play media files then I'm going to return the two of them I bought. Just not a capable device if it can't do something so trivial.
    Thanks.

    I'm still trying to find a way to do this simple task. Everyone has home networks now and not able to simply browse to a folder where you keep your video/music files is quite a problem with such a brand new, ultimate tablet. I can even do this with my Android phone I have. I have terabytes worth of music and movies and if I can't watch them with this ipad tablet then I for sure will return this tablet and buy Android from now on. I'm now finding out how locked down Apple products really are and how limited UNLESS you BUY an app or only go through an Apple type portal. I wonder if people know that you can't play your media you have saved at home with an ipad.

  • Is my airport network secure with Personal File Sharing on?

    I have my Airport Extreme connected to a cable modem. I have a G4 tower w/external hard drive connected by ethernet cable to the airport base station. I use a MacBook laptop wirelessly around the house to access the internet.
    Each computer is set up for multiple users but we don't use passwords with any of our user accounts. I have Personal File Sharing turned on in both computers and am able to access accounts and drives from the other computer in the house.
    I do have password protection (WPA/WPA2 personal) set up on the Airport network itself.
    Does the fact that I don't have passwords on the user accounts mean someone outside of my home could get into my home network and access my files?
    Does the afp address I use to access the other computer in the house afp://10.0.XXX mean it is restricted to people outside of my home?
    Any guidance someone could provide is appreciated.

    Does the fact that I don't have passwords on the user accounts mean someone outside of my home could get into my home network and access my files?
    No.
    WPA (with a strong non-dictionary password) is going to keep everyone off you network.
    If they could get on your network, then they would be able to access your files.

  • Error connecting, tap to retry, it sees my WiFi and computer name but can't connect

    Hi all, I am trying to get Edge Inspect to work on my Windows 7 PC (it did work for me a few times when I had it installed as Shadow when it initally came out)
    I have read through various forum posts. I am also running Mcafee Virusscan/Firewall. 
    In Google Chrome I have the extension installed at the little "In" symbol top right, when I click it it says Adobe Edge Inspect "On", please start the Adobe Edge Inspect Application.
    I open up the lastest version of Edge Inspect (v1.0.393) on either my iPhone or iPad, it shows the name of my WiFi router and shows the name of the computer that is running Google Chrome, it looks like it is searching for a connection (shows spinner) and then it says "Error connecting, tap to retry".
    I have opened up port 7682 in my Mcafee Firewall
    I have shutdown all open programs
    I have tried manually entering in the computer IP address via manual connect
    I have updated chrome extension and ios apps to latest version
    I have tried reinstalling chrome extension
    I have tried at Windows Command prompt "netstat -ano" it doesnt show port 7682 being used, until I open up Google Chrome, then it shows MYCOMPUTER:7682 SYN_SENT, which I checked the PID against and yes it is Google Chrome using 7682
    Any help would be great

    Hi again Mark, still no luck here.
    I also have a Mac in my network so I thought I'd try installing to that to see what would happen, I just installed Adobe Edge Inspect extension onto Google Chrome on that machine and restarted the iOS apps on both iPad and iPhone and they actually didnt see the Mac machine at all, still just shows the PC computer.
    Also did I mention on my iPad I can still see the last time the connection actually worked (when it was called Adobe shadow, on my iPad underneath MYCOMPUTERNAME Error Connecting, tap to retry it has MYCOMPUTERNAME Last Used 24/07/12 8:59PM). Wouldnt have anything to do with a conflict with the old Adobe Shadow or anything would it, I'm pretty sure Adobe Shadow got uninstalled by default anyway, just a thought.
    So I'm not sure if it can be a problem with the Router because nothing has changed with the router since the last time it successfully worked when it was Shadow? I did add the Mac machine to the network since this time, but that machine hasnt been on when I have been doing any of this testing anyway.
    Also in the Edge Inspect in the Chrome browser I do not see any deviced listed, but back on the iOS App I do see the Wifi network and Computer name as discussed, so does this mean its an inbound connection issue or?
    Also sent you router settings via private message etc.

  • Why can't Apple TV's and iOS devices see home sharing on my Windows 7 computer when iTunes libraries on other computers on the same network and connected to the same Home Sharing can?

    I have never previously had any problems with Home Sharing, I have always found it to be completely reliable as advertised. I have 2 computers in the house, (one MacBook and one Windows Desktop) connected to the same Home Sharing account, connected to the same BT Home Hub 4. My situation is that I have nearly 2TB of data of which I would like to share with the home wirelessly, in my mind the desktop is the logical place for this to be shared from.
    When running, iTunes on this desktop broadcasts to other iTunes libraries, but no other iOS devices or Apple TV's connected to the same Home Sharing account cannot see it.
    I have tried turning Home Sharing off, and then turning it back on, closing iTunes, restarting the computer, going to Network and Sharing Centre and unticking IPv6 in the network adapter properties, even completely wiping the computer and reinstalling Windows 7.
    One of the Apple TV's in the house was recently purchased by my parents with the promise from me that everything would work seamlessly... so far it isn't and I am frustrated that the Apple technology that I have come to rely on isn't working as expected.
    One thing that has occurred to me upon writing this is that it is a very large amount of data, and I have not attempted to share this with another computer that is currently working and broadcasting it's Home Share fine.
    I am sorry if I have ommitted any important details, any further questions don't hesitate to ask. I would be so grateful of any suggestions, my parents are depending on me.

    I have found with AppleTV that it is the IPV6 on the computer you want to access is the problem.  The issue is that Homegroup on Win 7 or Win 8 requires IPV6 to work, but AppleTV won't work with IPV6.  (So maybe double check you have IPV6 turned off)
    So you have to make a choice - Homegroup or AppleTV.... but you can't have both, until Apple brings ATV up to date. (crazy that it does not recognise IPV6 - c'mon Apple!)
    You can set up sharing individually in Win 7 or 8 and have the ATV access files that way.
    Having said that, there is always the exception.. I have an old HP home server running Win8 and it services ATV - but is part of the Homegroup... have no idea why it works on both, but no other machine on the home network will talk to both ATV and Homegroup at the same time!

  • Windows 7 - Files missing from network share after trying to burn and no data cached to be burned

    I ran into an issue trying to burn some file from a network share using Windows 7 Home Professional.  I was trying to burn some .jpg files from a mapped network share drive using explorer.  Every time I would drag the files to be burned from
    the share drive to the explorer screen to be burned, the files would disappear from the share.  To make things worse the files would not show up in the screen to be burned.  I was unable to locate any of the files on either of the systems when performing
    a search after this took place.  I verified that the steps that I was taking to burn the files were the same as outlined on the Microsoft site.  No matter what I did to burn these files, they were deleted from the mapped network drive. 
    Below are the steps that I took that both resulted in the files being deleted as well as what I had to do to finally burn the disc.
    Steps that resulted in files being deleted:
    1. Insert blank CD into drive. 
    2. From prompt select burn using explorer (Mastered Format)
    3. Enter title and select with CD/DVD, click Next.
    4. Open a second explorer window, navigate to mapped network drive with files to be burned and snap next to explorer to be burned.
    5. Drag and drop the files from the share drive to CD.
    This where the train would fall off the tracks every time.  I would receive a message that the file(s) no longer exist and if I wanted to continue.  From here the files would be deleted from the share drive.  The best part is that the files
    would also NOT be locally stored to be burned. 
    Steps to burn share files WITHOUT delete:
    Follow steps outlined above, but instead of just dragging and dropping the files as outlined in step 5 select the files from the network share location, right mouse select copy.  Then right mouse select paste in the explorer window to be burned.
    I have tested this many times and every time ended up with the same problem.  At this point I am sure that there is a problem with the way that Windows 7 is performing the burn.  The system that I was using to burn is Windows 7 Home Professional
    with all the patches and updates loaded.  The remote system is Windows XP Professional with all the patches and updates loaded.
    Thanks in advance

    Yes, the problem is still continuing. However, after looking into as much of it as I can, I can confirm something that r.p.b_ started stumbling on. The files are deleted IF AND ONLY IF a user is using the built-in Windows 7 disc burning utility AND is dragging
    and dropping the files to the drive from a network share; this doesn't happen locally. If you watch what happens in the native folder, the files are literally scrubbed from the drive as they are processed and added to the image. However, if you Right Click
    on the files and copy them, then Right Click->Paste onto the drive, they remain. (The keyboard shortcuts also worked.) Also, 3rd party disc burning utilities function they way the should. (In other words, they don't delete the files.)
    My speculation is that there's a bug in the coding that sees the network share as a temporary buffer file while the image is being prepared. Then, as the files are processed in what ever way is needed, the "temporary buffer" is being deleted. The result:
    lost files on a network share. But, this is just speculation.

Maybe you are looking for