Missing make files during install

During install on Slackware Linux
recievd error message that it could not
find ins_oemagent.mk and ins_odg.mk

Never mind. I misinterpreted the process. I was thinking there were multiple source rpms.
There is only one src file currently and you just compile that:
rpmbuild --rebuild /rpmbuild/SRPMS/R-3.0.1-2.el6.src.rpm
that creates a number of RPMS. But you only install one of those:
such as:
rpm -i /root/rpmbuild/RPMS/x86_64/R-core-3.0.1-2.el6.x86_64.rpm

Similar Messages

X Standard and missing maker files

I have installed X Standard, using Windows 8.1 and Office XP. I cannot create documents as the "missing maker files" error comes up. I have updated X (I think) to no avail....help please!

Hi T.A. Monz,
Please refer the KB Doc : Troubleshoot Acrobat PDFMaker problems | Office | Windows
Regards,
Rave

Fatal Slapd Missing configuration file during ds5.2 install

I am still trying to install ds 5.2 on Solaris 8. idsktune reports no errors.
During install I get the following error message:
Your new directory server has been started.
Created new Directory Server
Start Slapd Starting Slapd server configuration.
Fatal Slapd Missing configuration file /exports/iplanet/setup/slapd/slapd.inf
Configuration of the Directory Server failed.
Error Directory Server configuration failure
although, the file /exports/iplanet/setup/slapd/slapd.inf is there!!!
any help? Thanks

Same problem. I ended up going to 9. Let me know if you figure it out. I even put a support call in w/ no luck.
Solaris 8 s28_38shwp2 SPARC

Deployment question - dynamic folder of unknown files during install

Hi,
I'm curious to see if this would be possible in flex. It doesn't seem to be directly possible, so perhaps there's a workaround?
The question:
Can I have a folder of files next to an .exe (or .air) install that will place this folder into the install location?
The background:
I'm making a photo viewer app. I want it to be able to work completely offline, in case they don't have an internet connection. I want this to be able to be used both in Windows and Mac. I figured an adobe air program would be a good way to do this.
The photos are going to be dynamic. I want to burn a cd with the .exe and a folder of images that are not available at the time of packaging. Can I do this? Do I have to make some kind of custom install exe to copy the files over after installing the program?
I was thinking of a workaround. I'd rather see if I could do the above- but this would be an alternative. Let the program install normally. When the program starts up it checks for a CD in the drive and copies the files to the program files before loading. If the program can't find any images in the program file and the CD ROM is not in the computer, I would throw an error saying to put the CD in the drive. This would work right? I see the storagevolumeinfo class but it doesn't seem like there's a way to differentiate types of removable media; only that they are removable. Am I wrong?

I see file type of "CDFS" on my CD-ROM drive. I'm assuming I can use this to make sure the removable drive is a CD based on googling it. It sounds like my backup plan can work. I'm still curious about the main question with the dynamic folder on install though.

Campus Manager 5.1.4 upgrade - locked files during install

During installation of CM 5.1.4 on Windows 2003 Enterprise Server, I get popup windows "Stop All Programs". I checked Windows Service console but have been unable to determine which processes may be holding these files. How do I determine?
Thanks,
D:\PROGRA~1\CSCOpx\objects\smarts\bin\sm_server.exe
D:\PROGRA~1\CSCOpx\objects\smarts\bin\system\sm_authority.exe
D:\PROGRA~1\CSCOpx\objects\smarts\bin\system\sm_server.exe
D:\PROGRA~1\CSCOpx\objects\smarts\lib\sm_actions.dll
D:\PROGRA~1\CSCOpx\objects\smarts\lib\sm_adsnmp.dll
D:\PROGRA~1\CSCOpx\objects\smarts\lib\sm_asl.dll
D:\PROGRA~1\CSCOpx\objects\smarts\lib\sm_auto_discovery.dll
D:\PROGRA~1\CSCOpx\objects\smarts\lib\sm_clsapi.dll
D:\PROGRA~1\CSCOpx\objects\smarts\lib\sm_decs.dll
D:\PROGRA~1\CSCOpx\objects\smarts\lib\sm_devstat.dll
D:\PROGRA~1\CSCOpx\objects\smarts\lib\sm_devstat_cisco.dll
D:\PROGRA~1\CSCOpx\objects\smarts\lib\sm_devstat_isdn.dll
D:\PROGRA~1\CSCOpx\objects\smarts\lib\sm_devstat_ptop.dll
D:\PROGRA~1\CSCOpx\objects\smarts\lib\sm_devstat_topspin.dll
D:\PROGRA~1\CSCOpx\objects\smarts\lib\sm_discovery.dll
D:\PROGRA~1\CSCOpx\objects\smarts\lib\sm_event.dll
D:\PROGRA~1\CSCOpx\objects\smarts\lib\sm_ga.dll
D:\PROGRA~1\CSCOpx\objects\smarts\lib\sm_gahttps.dll
D:\PROGRA~1\CSCOpx\objects\smarts\lib\sm_health.dll
D:\PROGRA~1\CSCOpx\objects\smarts\lib\sm_health_cisco.dll
D:\PROGRA~1\CSCOpx\objects\smarts\lib\sm_health_topspin.dll
D:\PROGRA~1\CSCOpx\objects\smarts\lib\sm_httpd.dll
D:\PROGRA~1\CSCOpx\objects\smarts\lib\sm_icf.dll
D:\PROGRA~1\CSCOpx\objects\smarts\lib\sm_icim.dll
D:\PROGRA~1\CSCOpx\objects\smarts\lib\sm_icim_core.dll
D:\PROGRA~1\CSCOpx\objects\smarts\lib\sm_icmp.dll
D:\PROGRA~1\CSCOpx\objects\smarts\lib\sm_icmpacc.dll
D:\PROGRA~1\CSCOpx\objects\smarts\lib\sm_license.dll
D:\PROGRA~1\CSCOpx\objects\smarts\lib\sm_nas.dll
D:\PROGRA~1\CSCOpx\objects\smarts\lib\sm_protocol_discovery.dll
D:\PROGRA~1\CSCOpx\objects\smarts\lib\sm_rclt.dll
D:\PROGRA~1\CSCOpx\objects\smarts\lib\sm_repos.dll
D:\PROGRA~1\CSCOpx\objects\smarts\lib\sm_servif.dll
D:\PROGRA~1\CSCOpx\objects\smarts\lib\sm_sms.dll
D:\PROGRA~1\CSCOpx\objects\smarts\lib\sm_snmp.dll
D:\PROGRA~1\CSCOpx\objects\smarts\lib\sm_snmpwalk.dll
D:\PROGRA~1\CSCOpx\objects\smarts\lib\sm_sockserv.dll
D:\PROGRA~1\CSCOpx\objects\smarts\lib\sm_system.dll
D:\PROGRA~1\CSCOpx\objects\smarts\lib\sm_trapd.dll
D:\PROGRA~1\CSCOpx\objects\smarts\lib\tls704d.dll
D:\PROGRA~1\CSCOpx\objects\smarts\lib\ver_suite.dll
D:\PROGRA~1\CSCOpx\objects\smarts\lib\xerces-c_2_1_0.dll

Try this:
1. In Windows, go to Start and click on 'Run...'. Type in services.msc and set the following CiscoWorks Services to Startup Manual:
-CiscoWorks Daemon Manager
-CSCS rsh/rcp service
-CSCS syslog service
-CSCS tftp service
3. Set your TEMP and TMP environment variables to C:\TEMP (make sure that directory exists, and everyone has full access). Right click on My Computer and click on Properties. Go to the Advanced tab to find the Environment Variables at the bottom.
4. Reboot the server.
5. Try upgrade again.
6. When the installation is complete, restore the startup of the following services to Automatic:
-CiscoWorks Daemon Manager.
-CSCS rsh/rcp service
-CSCS syslog service
-CSCS tftp service
8.- Reboot the server.

Error with finding the correct LABEL.ASC file during install

I am installing the SAPNW2004sJavaSP9_Trial and at the stage where SAPIns perform the "software package check" i am asked to browse to the package location and I have tried all locations on the extracted downloads and I keep getting the error "........ ( look for label SAP:JMIG:700:::*)
I have browsed to all the locations where there is a "label.asc" file and there are quite a few of them. I am not able to go past this point.
Please help
Thanks
Chuks

Lydia,
i discovered that I probably didn't get a full download of the install files. Someone sent me the ftp links to the download site and i got a full download and then installed properly. I didn't see that issue again. Here's the link below:
ftp://ftp.sap.com/pub/sdn/devkits/netweaver/java/SAPNW2004sJavaSP9_Trial.part1.rar
ftp://ftp.sap.com/pub/sdn/devkits/netweaver/java/SAPNW2004sJavaSP9_Trial.part2.rar
ftp://ftp.sap.com/pub/sdn/devkits/netweaver/java/SAPNW2004sJavaSP9_IDE.rar

Exit Code: 6 – problems to find some file during install

Hello, anytime i try to install CC, this error pops out. I think its the same when trying to install other apps, not just PS. Tried to uninstall, reinstall, reset, reinstall, clean windows temp manually. What should i do?
Exit Code: 6
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 4 error(s)
----------- Payload: Microsoft Visual C++ 2010 Redistributable Package (x86) 10.0.40219.325 {55B82130-18F9-11E2-8D43-00215AEA26C9} -----------
ERROR: Third party payload installer vcredist_x86.exe failed with exit code: 1612
ERROR: Failed to repair Microsoft Visual C++ 2010 Redistributable Package (x86). Please try repairing it by double clicking on the executable at "C:\Users\Johny\AppData\Local\Temp\{2C51F140-C9C7-45B6-96B4-EFA75737E770}\Photoshop_14_LS 20\Adobe CC\payloads\Microsoft VC 2010 Redist (x86)\vcredist_x86.exe", or download and install the latest Microsoft Visual C++ 2010 Redistributable Package (x86) from Microsoft website - www.microsoft.com
----------- Payload: Microsoft Visual C++ 2010 Redistributable Package (x64) 10.0.40219.325 {54B0C34F-18F9-11E2-BC1D-00215AEA26C9} -----------
ERROR: Third party payload installer vcredist_x64.exe failed with exit code: 1612
ERROR: Failed to install Microsoft Visual C++ 2010 Redistributable Package (x64). Please try installing it by double clicking on the executable at "C:\Users\Johny\AppData\Local\Temp\{2C51F140-C9C7-45B6-96B4-EFA75737E770}\Photoshop_14_LS 20\Adobe CC\payloads\Microsoft VC 2010 Redist (x64)\vcredist_x64.exe", or download and install the latest Microsoft Visual C++ 2010 Redistributable Package (x64) from Microsoft website - www.microsoft.com

I've just tried to reinstall Visual C++, I even installed the new version from 2012
http://www.microsoft.com/en-us/download/confirmation.aspx?id=30679
No chance, same errors in Photoshop, Illustrator, Indesign ...
Exit Code: 6
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 4 error(s)
----------- Payload: Microsoft Visual C++ 2010 Redistributable Package (x86) 10.0.40219.325 {55B82130-18F9-11E2-8D43-00215AEA26C9} -----------
ERROR: Third party payload installer vcredist_x86.exe failed with exit code: 1612
ERROR: Failed to repair Microsoft Visual C++ 2010 Redistributable Package (x86). Please try repairing it by double clicking on the executable at "C:\Users\Johny\AppData\Local\Temp\{8FD78FCF-0E9A-48A7-8C54-A57087B6D568}\InDesign_9_LS20 \Adobe InDesign CC\payloads\Microsoft VC 2010 Redist (x86)\vcredist_x86.exe", or download and install the latest Microsoft Visual C++ 2010 Redistributable Package (x86) from Microsoft website - www.microsoft.com
----------- Payload: Microsoft Visual C++ 2010 Redistributable Package (x64) 10.0.40219.325 {54B0C34F-18F9-11E2-BC1D-00215AEA26C9} -----------
ERROR: Third party payload installer vcredist_x64.exe failed with exit code: 1612
ERROR: Failed to install Microsoft Visual C++ 2010 Redistributable Package (x64). Please try installing it by double clicking on the executable at "C:\Users\Johny\AppData\Local\Temp\{8FD78FCF-0E9A-48A7-8C54-A57087B6D568}\InDesign_9_LS20 \Adobe InDesign CC\payloads\Microsoft VC 2010 Redist (x64)\vcredist_x64.exe", or download and install the latest Microsoft Visual C++ 2010 Redistributable Package (x64) from Microsoft website - www.microsoft.com

After installing two updates, I cannon create .pdf documents as the window says "Missing PDF Maker Files." I've uninstalled Acrobat and re-installed twice, same problem

After installing two updates, I cannon create .pdf documents as the window says "Missing PDF Maker Files." I've uninstalled Acrobat and re-installed twice, same problem. How do I correct problem?

Thank you. I googled my problem and got good answers involving making changes to my Office settings - which worked.
Sent via the Samsung GALAXY S® 5, an AT&T 4G LTE smartphone

Error message: Missing PDF maker files in Word 2007

OK, I am beyond frustrated. I have had nothing but trouble with Windows Vista and Adobe Acrobat. Please help!!!
What happens: first, the pdf addin for Word 2007 suddenly becomes disabled, for no apparent reason. Forget about trying to re-enable it through the Add-Ins menu, because Word tells me that the "connected state of Office Add-Ins registered in the HKEY_LOCAL_MACHINE cannot be changed". This is a problem for me, because I use a special font (Vietnamese) that sometimes gets corrupted when running pdf maker. The only consistent way I have found to avoid this problem is to run the pdf maker as "Quick PDF" and as far as I can see that option is only available through the pdf addin in Word, I have never been able to find it when I open the Acrobat program and create a pdf from there.
Second problem: shortly after the pdf addin becomes disabled, my Acrobat program loses the ability to create pdfs altogether. I get the error message "Missing PDF maker files". Yes, I have tried repairing the installation and re-starting my computer per the instructions given. It doesn't fix the problem. I also tried looking in the Knowledge Database on this website, but it appears that the instructions they have to fix the problem there are for earlier versions of Word, not 2007, because my version of word does not look like the version of Word in their little videos.
This is the second time this has happened. The first time I resolved the problem by a) re-installing Acrobat, which is a pain because it involves calling Adobe and wading through their customer service to get a new installation number, and b) paying a computer repair service to dig deep into the guts of my computer and convince it to change the Office Add-ins to allow the pdf addin again. It worked for about 6 months, and now I have the same problem again. For some reason Vista is spontaneously disabling Acrobat.
I simply cannot deal with this every few months. We all know that Vista is a crappy program, but I run a business and I need a program that works with whatever crappy program Microsoft puts out. Please, can anyone give me suggestions about how to re-enable these functions when Vista disables them?
Thanks in advance!
Alycia

for Office 2007, see if this Microsoft product will work for you
http://www.microsoft.com/downloads/details.aspx?FamilyId=4D951911-3E7E-4AE6-B059-A2E79ED87 041&displaylang=en

Error in invoking target install of make file /opt/oracle/product/9.0.1/ctx/lib/ins_c

I am trying to install Oracle 9i database release 2 on Linux RedHat 7.3. I got error message from OUI during the linking Oracle database
error in invoking target install of make file /opt/oracle/product/9.0.1/ctx/lib/ins_ctx.mk
Any input is greatly appreciated.

Pl identify exact version of "10g" you are trying to install. Are you following all of the steps in the Install Guide ? Pl post the last 50 lines from the install log file
HTH
Srini

Acrobat XI PDF maker files missing

Have just installed XI. I run Win7 and 32bit Office 2010. PDF export ribbon in showing in word and you can create pdf from this.
The problem arises if you use the right click 'create pdf' function. More importantly, when using the merge multiple files to PDF function. In both cases it works ok with excel but fails on word (in the case of the merge multiple file function all other types f file go in but the word file fails)
I get he message 'PDF maker files missing'. It suggests a repair that I have tried but that doesn't help.
I have checked the COM add in isn't disabled. It's not.
Just can't get this working. Help!!!

Is it that none of the right click options are not working (Create PDF, Create PDF and Email or Combine only)?
Try converting the word file by dragging and dropping the file to Acrobat interface/icon.
Are you able to convert the word document to PDF from Acrobat Ribbon (Acrobat-> Create PDF) from within the word application?
Is the issue with a particular word file or happening with all the word files?

Oracle 9.0.1on RH 9: "Error in involking target install of make file"

I have complete 100% for install Oracle 9.0.1 i on RH 9
But the problem happen during second step, is Oracle Configuration. when I finished 62% the error message occure. It is
"Error in involking target install of make file
/opt/oracle/product/9.0.1/plsql/lib/ins_plsql.mk"
I try to solve this solution by set LD_SELF_CONTAINED=""
in z/opt/oracle/product/9.0.1/bin/genclntsh file.
after that i run /opt/oracle/product/9.0.1/bin/genclntsh
the error is: "cp: cannot stat '/DISCARD/'"
Please help me...

I don't remember where on OTN I found this, but if you haven't already, you need to install binutils-2.11.90.0.8-13.i386.rpm. Also, make sure you have K shell installed, make a symbolic link (ln -s /sbin/fuser /bin/fuser), have /usr/bin as the first entry in your $PATH. All of the above should be stated on the first 'popup window' during the install.

RIDICULOUS Crystal Reports Server XI R2 SP4 - Installing - missing cab file

Unsympathetic SAP rep Don Williams wrote in a now closed thread,
Subject: Re: Crystal Reports Server XI R2 SP4 - Installing - missing cab file : m293.cab
Message: Hi All,
There is no incremental SP4 service pack for Crystal Reports Server XI R2 and no plans to build one.
Your ONLY option is to back up your CMS and Data store, un-install and then install from the FTP link.
The downloadable file from the support site is broken and they are working on fixing it and it is/will be the full build also.
Closing this post now.
Thank you for your understanding
Don
Frankly, this is outrageous. This issue has been open for close to 5 months. Rather than simply updating the SP4 incremental update with the correct files, SAP's brilliant response is to tell us that the file is STILL broken, but ***** you, whenever we fix it it will be the full build only. Well, thanks! That makes it so much easier. Rather than looking at Crystal Reports 2008, maybe it's time to suck it up and look elsewhere,
Here's hoping SAP decides to do the right thing. I'm sure everyone on the original thread would be interested.

Hi Falk,
   Yes, I am downloading it from a Win2003 machine. The browser is IE7.
   I can even see what's inside the m293.cab, and it is not the file mentioned on the error message...
   This is the m293.cab content (one file):
   tslv.dll.7ADA0B91_68E0_4E90_AD3D_23C9E3079BAB
   The file doesn't seem to be corrupted, it just doesnt have what was expected by the installer software.
   I tried downloading it again and had the same result... These are the installation files that I've already tried with the same result:
    - crsxir2win_sp4.exe (from [https://smpdl.sap-ag.de/~sapidp/012002523100009887052008E/crsxir2win_sp4.exe])
    - 1401492085.exe (from [https://businessobjects.subscribenet.com/control/bobj/product?cert_num=48316663&child_plneID=30801])
   The next one was not the rigth package:
     - boXIwin_sp2.zip (from [https://smpdl.sap-ag.de/~sapidb/012002523100005931922008E/boXIwin_sp2.zip])
   I uploaded the servicepack4 part of the log where the error appears:
[ftp://ftp.businessobjects.com/pub/incoming/sp4LogPiece.txt]
Thanks,
Marcos

Error During INSTALL of Application Export File

An error is reported during INSTALL of an application that I am trying to copy (Import/Install) from a "development" Work Space into a "production" Work Space. The production (target) Work Space is on the same HTML DB instance as the development Work Space.
I am receiving the following INSTALL error:
ORA-20001: GET_BLOCK Error. ORA-20001: GET_STMT error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: line 15, column 1: PLS-00103: Encountered the symbol &quot;,'39','RD8','8','S','10','U','43','UD','41','UG','11','W')) END)&quot; when expecting one of the following: . ( * @ % &amp; = - + ; &lt; / &gt; at in is mod remainder not rem &lt;an exponent (**)&gt; &lt;&gt; or != or ~= &gt;= &lt;=
Following is some pertinent (hopefully) information:
The above INSTALL error takes exception to part of a Region Select (sql) that works fine in the development Work Space.
The common HTML DB (v1.6) instance is on UNIX.
A new Work Space was created on the same instance.
A new schema name was created during creation of the new Work Space. However, this schema does not point to a database. (We were not certain how to setup the schema to parse to our live database.) I will be running DBLINK upon production application startup in order to access the database objects.
EXPORT INFO -
File Format: UNIX (also, tried DOS but received same error during INSTALL)
IMPORT INFO -
File Type: Application/Page Export
File Character Set: Western European Windows 1252
Target Work Space is newly created on the same HTML DB instance.
INSTALL INFO -
*Parse As Schema: COLLIVE17 (Again, this schema does not parse to a database. I intend to use DBLINK.)
*Build Status: Run and Build Application
Please refer to above error message.
Again, any insights or suggestions are appreciated.

Urgently need help! I've read several other Forum messages having a related problem but none having same Install error message.
Again, my Export/Import from development Workspace to production Workspace is successful. The following error is reported when I attempt to "Install" into the production Workspace:
ORA-20001: GET_BLOCK Error. ORA-20001: GET_STMT error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: line 15, column 1: PLS-00103: Encountered the symbol &quot;,'39','RD8','8','S','10','U','43','UD','41','UG','11','W')) END)&quot; when expecting one of the following: . ( * @ % &amp; = - + ; &lt; / &gt; at in is mod remainder not rem &lt;an exponent (**)&gt; &lt;&gt; or != or ~= &gt;= &lt;=
The "snippet" of Region Sql Select code that relates to the reported error is:
ELSE htmldb_item.display_and_save (5, DECODE (GET_GRADE_B93 (sac.stc_final_grade,sac.stc_verified_grade),'18','AU','1','A','3','B','4','C','7','CR','5','D','46','DR','6','F','47','FW','49','IB','30','IC','31','ID','23','IF','44','MW','9','NC','21','RD','14','RD0','33','RD1','32','RD2','34','RD3','35','RD4','36','RD5','37','RD6','38','RD7','39','RD8','8','S','10','U','43','UD','41','UG','11','W'),'GRADE_'||ROWNUM) END q_v_grade,
HTML DB version is: 1.6.0.00.67. I've also tried to Export/Import/Install the application into the "same" Workspace specifying the same schema, and only changing the Application ID. However, I get the same Install error (see above).
Any suggestions on things to try in order to get application into production is greatly appreciated.
Thanks, Bernard.

I keep on getting the message "missing .dll file" when I try to install Itunes on Windows 7 what is wrong ?

I am using Windows 7 (64) and keep on getting the message of "missing .dll files" after I attempt to install the latest version of ITunes. I attempted to install an earlier version and had the same results. I have uninstalled and reinstalled ITunes to no avail. I have queried this message on Google and found little to go by.
Can anyone help from here ?

This has just happened to me - again. Can't think what caused it. I uninstalled Quicktime a little while ago, maybe connected? I don't know. Uninstalling iTunes, or repairing, or a fresh iTunes install does not help
Even if you keep downloading and putting the dll files it keeps asking for in the sysWOW64 and/or System 32 folder, Apple Mobile Device Support will not not 'start' from Services.
Anyway, as well as itunes, you need to also un-install Apple Software Update, Apple Mobile Device Support, and Bonjour, then reinstall the latest iTunes to get it all working again

Missing make files during install

Similar Messages

Maybe you are looking for