Missing post message in client session monitoring

Hi,
I have synchronized creating a record of a data object, in the message monitoring tool appears that the message is processed correctly but if I look the session at the client session monitoring that message did not appears, would appears as post message, right?
Another question, why in the client session monitoring at session information of a one session appears not sorted the synchronization cycle number or date and time? Can I sorted it?
I'm in 7.10 SP11.
Thanks in advance and kind regards.

Hi,
You see only default columns given by SAP. But you can add additional attributes like direction, message type etc., by going to personalization screen. On extreme right of the table top, you see a couple of buttons. One of them is personalization. Click on that and it opens a pop which shows the list of available fields for display on left side and fields which are already displayed on the right side.
You need to select direction and message type from left and move them to right and save and apply those settings for the user. So from next time, it shows the selected attributes.
Coming to your problem, do you see any messages at all in session monitoring? Without giving any filtering criteria just try to search for all of them in the system. See if you get any entries at all. (If still not displayed then you need to enable session monitoring logs).
The timezone difference could be because the system timezone is set to different timezone than of your current.
Best Regards,
Siva.

Similar Messages

Send message to client before session invalidated

i am using jsp and java servlet tech. for my web application.
my problem is :
i want to send a message to client before session invalidated.
please help me to find the best way to solve my problem.

You can detect session termination by putting an object in the session attributes which implements HttpSessionBindingListener. What you can't do is send a message to a client, basically because all http transactions are initiated by the client. The only way I can see you could do this is to put an applet on your web pages which periodically consults the server concerning the session state.
Then the problem is that there's no obvious way of determining if the session is about to timeout, only whether it has or not. Your applet couldn't return the session cookie (as such) because that would reset the session timeout and the session would never expire. If you could obtain the session without reseting the expiry (perhaps from SessionContext though that's depracated) you could look at getLastAccessedTime() and getMaxInactiveInterval, but I don't know that this can be done. You can't even count, on some systems, on the session remaining in memory.
If you really need to do this you may need to consider implementing sessions for yourself. I've done this for non-webapp based logins and it's not too hard.

Missing dll in top sessions monitor..

I installed OEM V9.0.1 on Win2K workstation. I am able to launch Enterprise manager console, access schema, etc,
but when I click on TOP SESSIONS MONITOR (after entering the user id & password), i get the following error
"the dynamic link library oravppdc.dll could not be found in the specified path"
I have searched all the directories for this dll, but I am not able to find it. where can I find it ?
thanks & regards

Hello,
Check SAP note 1145609 and see if it helps.
Regards,
David

TLS Handshake, Client Authentication,missing CertificateVerify Message

Hi,
According to the TLS 1.0 specification (rfc2246) there are 2 additional client messages if client authentication is used.
- client certificate: the clients certificate chain
- certificate verify: a digitally signed hash of the handshake messages so far
the specification states for the certificate verify message:
"This message is only sent following a client
certificate that has signing capability (i.e. all certificates
except those containing fixed Diffie-Hellman parameters). When
sent, it will immediately follow the client key exchange message.
During a TLS-Handshake with Client-Authentication using JSSE (Java 1.4.2.) on the client using a keystore which contains ONLY a certificate without the corresponding private key the client sends only the client certificate message but no certificate verify.
While i understand that the client is not able to sign the hash without the corresponding private key I wonder if this behavior (sending the certificate without the certificate verify message) is correct according to the TLS 1.0 specification.
my question (for these who would not read the stuff above ;) ):
- is it a correct implementation of the TLS handshake protocol to skip the client verify message if the client does not possess the private key of the used certificate
- (non-java) does someone know a way to force a SCHANNEL (windows) server implementation to reject connections where the certificate verify message is missing

J.O.H. wrote:
Hi,
According to the TLS 1.0 specification (rfc2246) there are 2 additional client messages if client authentication is used.
- client certificate: the clients certificate chain
- certificate verify: a digitally signed hash of the handshake messages so far
the specification states for the certificate verify message:
"This message is only sent following a client
certificate that has signing capability (i.e. all certificates
except those containing fixed Diffie-Hellman parameters). When
sent, it will immediately follow the client key exchange message.
During a TLS-Handshake with Client-Authentication using JSSE (Java 1.4.2.) on the client using a keystore which contains ONLY a certificate without the corresponding private key the client sends only the client certificate message but no certificate verify.
While i understand that the client is not able to sign the hash without the corresponding private key I wonder if this behavior (sending the certificate without the certificate verify message) is correct according to the TLS 1.0 specification.
yes, that is correct if the client certificate message that is sent is empty. As section 7.4.6 states, "..If no suitable certificate is available, the client should send a certificate message containing no certificates..."

CF 8, Client Sessions, & the Registry

Hello all!
There are an abundance of posts in regards to storing the Client Session data in the Windows Registry. http://forums.adobe.com/message/4302560 being the most related to my issue. (http://www.carehart.org/blog/client/index.cfm/2006/10/4/bots_and_spiders_and_poor_CF_perfo rmance has been a handy article as well.) However, none of them seem to behave the way mine does after ColdFusion and the application are told not to store values there. I updated my configurations, restarted the Cold Fusion services, delete the old session data via "reg DELETE HKEY_LOCAL_MACHINE\SOFTWARE\Macromedia\ColdFusion\CurrentVersion\Clients", and confirm that everything is deleted. However, after I restart the server and check that place in my registry, there's still several GB of data in there that references sessions months old. What repopulates this? I deleted all of it, why does it come back? Anyone able to tell me what I'm not doing correctly?
Thanks in advance,
bmj

Just to be sure, before deleting the registry values, instruct ColdFusion not to store client sessions in the registry. You do so by navigating to
Server Settings >> Client Variables
in the ColdFusion Administrator. Select to store client variables in cookies, for example.

Posting messages from an EJB

Hi!
          I have an EJB (stateless session bean) that should post messages to a Queue.
          The EJB have container-demarced transactions and transaction-attrib set to
          REQUIRED. I can't seem to get the messages posted though, they are kept in
          the pending state when looking in the console. If I choose to create
          QueueSession without transactions they get posted fine but I need to post to
          rollback in case the bean should.
          Could anyone shed some light on this?
          /Lars-Fredrik Smedberg


Short answer :) but the only resonable thing left for me to think of...
          thanx again for the help!
          /Lars-Fredrik Smedberg
          "Tom Barnes" <[email protected]> skrev i meddelandet
          news:[email protected]...
          >
          > Lars-Fredrik Smedberg wrote:
          >
          > > Hi!
          > >
          > > I didnt use a transacted session but I forgot to turn
          > > user-transaction-enabled on when configuring. This is a bit confusing
          > > though, is the JMS provider looking at the container-managed transaction
          by
          > > the EJB container as a User-Transaction?
          >
          > Yes.
          >
          > >
          > >
          > > Thanx
          > > Lars-Fredrik Smedberg
          > >
          > > "Tom Barnes" <[email protected]> skrev i meddelandet
          > > news:[email protected]...
          > > > I think it is likely you are using a "transacted" session, which is
          not
          > > what you
          > > > want (yes
          > > > this is anti-intuitive). To get a JMS client to participate in the
          tran,
          > > use a
          > > > connection factory configured
          > > > with "user-transactions-enabled", and a session with "transacted" set
          to
          > > false.
          > > >
          > > > See the JMS FAQ for info on JMS and transactions.
          > > >
          > > > Tom, BEA
          > > >
          > > > Lars-Fredrik Smedberg wrote:
          > > >
          > > > > Hi!
          > > > >
          > > > > I have an EJB (stateless session bean) that should post messages to
          a
          > > Queue.
          > > > > The EJB have container-demarced transactions and transaction-attrib
          set
          > > to
          > > > > REQUIRED. I can't seem to get the messages posted though, they are
          kept
          > > in
          > > > > the pending state when looking in the console. If I choose to create
          > > > > QueueSession without transactions they get posted fine but I need to
          > > post to
          > > > > rollback in case the bean should.
          > > > >
          > > > > Could anyone shed some light on this?
          > > > >
          > > > > /Lars-Fredrik Smedberg
          > > >
          >

SSL VPN message "This (client) machine does not have the web access privilege."

Hello!
I am trying to configure the SSL VPN (WebVPN) and I am almost done but when clicking on the URL's I configured in the bookmarks, I get the message "This (client) machine does not have the web access privilege. Please contact your SSLVPN provider for assistance." I looked through the many tutorials and guides in existence and none talks about such error and the fix for it. In fact, if I search the net for this error message I get only one match, in the Cisco website, where is say that "The client computer does not meet the security criteria of having web access functionality through the SSL VPN gateway." and as fix it gave this tip "Check the URL to the gateway or contact the administrator if it persists." So, nothing on the website about what this issue is and how to fix it. I will provide my IOS configuration and hopefully someone will spot the issue. Here it goes:
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname R1
boot-start-marker
boot-end-marker
logging message-counter syslog
no logging buffered
enable secret 5 $1$1LLX$u7aTc8XfNqPZhPVGwEF/J0
enable password xxxxxxxx
aaa new-model
aaa authentication login userAuthen local
aaa authentication login sdm_vpn_xauth_ml_1 local
aaa authorization network groupauthor local
aaa session-id common
crypto pki trustpoint TP-self-signed-1279712955
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1279712955
revocation-check none
rsakeypair TP-self-signed-1279712955
crypto pki certificate chain TP-self-signed-1279712955
certificate self-signed 01
3082023A 308201A3 A0030201 02020101 300D0609 2A864886 F70D0101 04050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 31323739 37313239 3535301E 170D3130 30333233 31313030
33375A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D31 32373937
31323935 3530819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
8100A8EF 34E3E792 36660498 9801F934 E8A41865 3599EA35 B073AC91 D7A53AF4
A4390D2F CB3DB2DE 936B28F0 A25F3CE1 6F40FD9E E79096F2 F89620E0 B31A7B34
649BBA22 AE44CB55 9F38BF0C 2F2770CF 8380C167 C17D760C 380E28E4 FF7D6874
9EFC310A 2AA60835 F1AA384F CD1A0173 19C98192 EBFBD531 24CB9203 EA9E7D54
B2C30203 010001A3 62306030 0F060355 1D130101 FF040530 030101FF 300D0603
551D1104 06300482 02523130 1F060355 1D230418 30168014 0D9D62EC DA77EAF3
11ABF64D 933633F9 2BA362DC 301D0603 551D0E04 1604140D 9D62ECDA 77EAF311
ABF64D93 3633F92B A362DC30 0D06092A 864886F7 0D010104 05000381 81006853
48ED4E3E 5721C653 D9A2547C 36E4F0CB A6764B29 9AFFD30A 1B382C8C C6FDAA55
265BCF6C 51023F5D 4AF6E177 C76C4560 57DE5259 40DE4254 E79B3E13 ABD0A78D
7E0B623A 0F2D9C01 E72EF37D 5BAB72FF 65A176A1 E3709758 0229A66B 510F9AA2
495CBB4B 2CD721A7 D6F6EB43 65538BE6 B45550D7 A80A4504 E529D092 73CD
   quit
dot11 syslog
ip source-route
ip dhcp excluded-address 192.168.0.1 192.168.0.10
ip dhcp pool myPOOL
   network 192.168.0.0 255.255.255.0
   default-router 192.168.0.1
   dns-server 87.216.1.65 87.216.1.66
ip cef
ip name-server 87.216.1.65
ip name-server 87.216.1.66
ip ddns update method mydyndnsupdate
HTTP
add http://username:[email protected]/nic/update?system=dyndns&hostname=<h>&myip=<a>
interval maximum 1 0 0 0
no ipv6 cef
multilink bundle-name authenticated
vpdn enable
vpdn-group pppoe
request-dialin
protocol pppoe
username cisco privilege 15 password 0 xxxxxxxx
crypto isakmp policy 3
encr 3des
authentication pre-share
group 2
crypto isakmp fragmentation
crypto isakmp client configuration group vpnclient
key cisco123
domain selfip.net
pool ippool
acl 110
crypto ipsec transform-set myset esp-3des esp-md5-hmac
crypto dynamic-map dynmap 10
set transform-set myset
reverse-route
crypto map clientmap client authentication list userAuthen
crypto map clientmap isakmp authorization list groupauthor
crypto map clientmap client configuration address respond
crypto map clientmap 10 ipsec-isakmp dynamic dynmap
archive
log config
hidekeys
interface Loopback0
ip address 10.11.0.1 255.255.255.0
ip nat inside
ip virtual-reassembly
interface Loopback2
description SSL VPN Website IP address
ip address 10.10.10.1 255.255.255.0
interface Loopback1
description SSL DHCP Pool Gateway Address
ip address 192.168.250.1 255.255.255.0
interface FastEthernet0
description $ES_LAN$
ip address 192.168.0.1 255.255.255.0
ip nat inside
ip virtual-reassembly
duplex auto
speed auto
interface BRI0
no ip address
encapsulation hdlc
shutdown
interface FastEthernet1
interface FastEthernet2
switchport access vlan 2
interface FastEthernet3
interface FastEthernet4
interface FastEthernet5
interface FastEthernet6
interface FastEthernet7
interface FastEthernet8
interface ATM0
no ip address
no atm ilmi-keepalive
pvc 8/35
encapsulation aal5mux ppp dialer
dialer pool-member 1
bundle-enable
dsl operating-mode auto
interface Vlan1
no ip address
interface Dialer1
ip ddns update hostname myserver.selfip.net
ip ddns update mydyndnsupdate host members.dyndns.org
ip address negotiated
ip nat outside
ip virtual-reassembly
encapsulation ppp
ip policy route-map VPN-Client
dialer pool 1
ppp chap hostname xxx
ppp chap password 0 xxxx
ppp pap sent-username xxx password 0 xxxx
crypto map clientmap
ip local pool ippool 192.168.50.100 192.168.50.200
ip local pool sslvpnpool 192.168.250.2 192.168.250.100
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 Dialer1
ip http server
ip http authentication local
ip http secure-server
ip nat inside source static tcp 192.168.0.2 21 interface Dialer1 790
ip nat inside source static tcp 192.168.0.15 21 interface Dialer1 789
ip nat inside source list 102 interface Dialer1 overload
ip nat inside source static tcp 10.10.10.1 443 interface Dialer1 443
ip nat inside source static tcp 10.10.10.1 80 interface Dialer1 80
access-list 102 deny   ip 192.168.0.0 0.0.0.255 192.168.50.0 0.0.0.255
access-list 102 permit ip 192.168.0.0 0.0.0.255 any
access-list 110 permit ip 192.168.0.0 0.0.0.255 192.168.50.0 0.0.0.255
access-list 144 permit ip 192.168.50.0 0.0.0.255 any
route-map VPN-Client permit 10
match ip address 144
set ip next-hop 10.11.0.2
control-plane
banner motd ^C
================================================================
                UNAUTHORISED ACCESS IS PROHIBITED!!!
=================================================================
^C
line con 0
line aux 0
line vty 0 4
password mypassword
transport input telnet ssh
webvpn gateway MyGateway
ip address 10.10.10.1 port 443
http-redirect port 80
ssl trustpoint TP-self-signed-1279712955
inservice
webvpn install svc flash:/webvpn/svc_1.pkg sequence 1
webvpn install csd flash:/webvpn/sdesktop.pkg
webvpn context SecureMeContext
title "My SSL VPN Service"
secondary-color #C0C0C0
title-color #808080
ssl authenticate verify all
url-list "MyServers"
   heading "My Intranet"
   url-text "Cisco" url-value "http://192.168.0.2"
   url-text "NetGear" url-value "http://192.168.0.3"
login-message "Welcome to My VPN"
policy group MyDefaultPolicy
   url-list "MyServers"
   functions svc-enabled
   svc address-pool "sslvpnpool"
   svc keep-client-installed
default-group-policy MyDefaultPolicy
aaa authentication list userAuthen
gateway MyGateway domain testvpn
max-users 100
csd enable
inservice
end
Thank you!

Hi,
Please check SAP note:
2004579 - You cannot create a FR company from a Package
Thanks & Regards,
Nagarajan

Error while posting messages to SOAP sender adapter SP 13

Hi Friends,
I have configured a SOAP sender adapter in XI 3.0 and is using the URL
http://host:port/XISOAPAdapter/MessageServlet?channel=:BS_WEBSERVICE:CC_WEBSERVICE_SOAP to post the messages. When I open the URL in the browser I am getting the error.
Message Servlet is in Status ERROR
Status information:
Servlet com.sap.aii.af.mp.soap.web.MessageServlet (Version $Id: //tc/aii/30_VAL_REL/src/_adapters/_soap/java/com/sap/aii/af/mp/soap/web/MessageServlet.java#5 $) bound to /MessageServlet
Classname ModuleProcessor: null
Lookupname for localModuleProcessorLookupName: localejbs/ModuleProcessorBean
Lookupname for remoteModuleProcessorLookupName: null
ModuleProcessorClass not instantiated
ModuleProcessorLocal not instantiated
ModuleProcessorRemote not instantiated
But when I test the URL http://host:port/XISOAPAdapter/HelperServlet?action=FindChannel&channel=:BS_WEBSERVICE:CC_WEBSERVICE_SOAP to check the communication channel I am getting the right response as below.
<?xml version="1.0" ?>
<http://host:port/XISOAPAdapter/HelperServlet?action=FindChannel&channel=:BS_EBTR_WEBSERVICE:CC_EBTR_WEBSERVICE_SOAP> <s:ChannelInfo xmlns:s="http://sap.com/xi/WebService/xi30">
<channelID>e7ac884596ea3d088cbfd8b434f942f2</channelID>
<name>CC_WEBSERVICE_SOAP</name>
<type xmlns:st="http://sap.com/xi/XI/System">st:SOAP</type>
<direction>INBOUND</direction>
<party />
<service>BS_WEBSERVICE</service>
</s:ChannelInfo
I used the http capture to debug, In the 1st case though I am getting "Message Servlet in status error" I am seeing a 200 OK code in the http capture tool. When the message is posted from .net client proxy we are getting a 500 internal server error.
Am not sure what causes the error ? I saw two notes in SDN related to SOAP - J2EE SP13. We are in SP13. Is this the issue ? Wanted to know your opinion before applying the notes.
Thanks & Regards,
Mathew

ABAP & Java stack was on different SP levels.

Issue while posting message to queue

Hi ,
I am getting following exception while posting message into queue.For every new build I am getting this exception and after 2 or 3 times of restart of corresponding OBPM related weblogic server,Issue is getting resolved
A component failed while executing activity '/COM/OU/UserlProcess#Default-3.0/ComponentExecution[PreProcessor]' (BP-method preProcessor) over instance '/COM/OU/UserlProcess#Default-3.0/15141/0'.
Details:
The task could not be successfully executed.
Reason: 'fuego.connector.ConnectorException: Connector [MAIN_Q:null:JMS] caused an exception when getting a resource of type [7].
Detail:Connector [MAIN_Q:null:JMS] caused an exception when getting a resource of type [7].
Caused by: Connector [MAIN_Q:null:JMS] caused an exception when getting a resource of type [7].
Detail:Connector [MAIN_Q:null:JMS] caused an exception when getting a resource of type [7].
Caused by: Connector [MAIN_Q:null:JMS] returned the wrong class [com.tibco.tibjms.naming.TibjmsConnectionFactoryAttributes] for a resource of type [2].
Detail:Connector [MAIN_Q:null:JMS] returned the wrong class [com.tibco.tibjms.naming.TibjmsConnectionFactoryAttributes] for a resource of type [2].
fuego.lang.ComponentExecutionException: The task could not be successfully executed.
Reason: 'fuego.connector.ConnectorException: Connector [MAIN_Q:null:JMS] caused an exception when getting a resource of type [7].
Detail:Connector [MAIN_Q:null:JMS] caused an exception when getting a resource of type [7].
     at fuego.server.execution.EngineExecutionContext.invokeMethodAsCil(EngineExecutionContext.java:1091)
     at fuego.server.execution.EngineExecutionContext.runCil(EngineExecutionContext.java:1277)
     at fuego.server.execution.microactivity.ComponentExecutionMicroActivity.runCil(ComponentExecutionMicroActivity.java:126)
     at fuego.server.execution.microactivity.ComponentExecutionMicroActivity.execute(ComponentExecutionMicroActivity.java:84)
     at fuego.server.execution.microactivity.MicroActivityEngineExecutionHandler.executeActivity(MicroActivityEngineExecutionHandler.java:57)
     at fuego.server.execution.ImmediateActivity.execute(ImmediateActivity.java:42)
     at fuego.server.execution.DefaultEngineExecution$AtomicExecutionTA.runTransaction(DefaultEngineExecution.java:304)
     at fuego.transaction.TransactionAction.startNestedTransaction(TransactionAction.java:527)
     at fuego.transaction.TransactionAction.startTransaction(TransactionAction.java:548)
at fuego.transaction.TransactionAction.start(TransactionAction.java:212)
     at fuego.server.execution.DefaultEngineExecution.executeImmediate(DefaultEngineExecution.java:123)
     at fuego.server.execution.DefaultEngineExecution.executeAutomaticWork(DefaultEngineExecution.java:62)
     at fuego.server.execution.EngineExecution.executeAutomaticWork(EngineExecution.java:42)
     at fuego.server.execution.ToDoItem.executeAutomaticWork(ToDoItem.java:251)
     at fuego.ejbengine.ItemExecutionBean$1.execute(ItemExecutionBean.java:217)
     at fuego.server.execution.DefaultEngineExecution$AtomicExecutionTA.runTransaction(DefaultEngineExecution.java:304)
     at fuego.transaction.TransactionAction.startBaseTransaction(TransactionAction.java:470)
     at fuego.transaction.TransactionAction.startTransaction(TransactionAction.java:551)
     at fuego.transaction.TransactionAction.start(TransactionAction.java:212)
     at fuego.server.execution.DefaultEngineExecution.executeImmediate(DefaultEngineExecution.java:123)
     at fuego.server.execution.EngineExecution.executeImmediate(EngineExecution.java:66)
     at fuego.ejbengine.ItemExecutionBean.processMessage(ItemExecutionBean.java:203)
     at fuego.ejbengine.ItemExecutionBean.onMessage(ItemExecutionBean.java:115)
     at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:466)
     at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:371)
     at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:327)
     at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4123)
     at weblogic.jms.client.JMSSession.execute(JMSSession.java:4013)
     at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:4541)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:464)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)
Caused by: fuego.connector.ConnectorException: Connector [MAIN_Q:null:JMS] caused an exception when getting a resource of type [7].
Detail:Connector [MAIN_Q:null:JMS] caused an exception when getting a resource of type [7].
at fuego.connector.ConnectorException.exceptionOnGetResource(ConnectorException.java:95)
     at fuego.connector.ConnectorTransaction.getResource(ConnectorTransaction.java:324)
     at fuego.connector.ConnectorTransaction.getResource(ConnectorTransaction.java:298)
     at fuego.connector.JMSHelper.getSession(JMSHelper.java:75)
     at fuegoblock.msg.DynamicJMS.sendMessage(DynamicJMS.java:145)
     at xobject.Utility.JMSService.writeToAppQueue(JMSService.xcdl:11)
     at xobject.Utility.Notification.sendAuditNotification(Notification.xcdl:19)
     at XXX.ManualProcess.Default_3_0.Instance.CIL_preProcessor(Instance.xcdl:20)
     at XXX.ManualProcess.Default_3_0.Instance.CIL_preProcessor(Instance.xcdl)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at fuego.server.execution.EngineExecutionContext.invokeMethodAsCil(EngineExecutionContext.java:1082)
     ... 31 more
Please help how can I resolve this issue
Thanks
Sailendra

I am also getting the same issue. Sailendra, did you resolve the issue?
If not could anyone help us to resolve this issue.
I am using Tibco JMS for queue and I have set 'ConnectionFactory' as Connection Factory Lookup Name value in the external resourse.
Thanks in advance.
Regards,
Ramanan

How to solve this "Prefix number: entry missing for system EC5 client 800"

Hi,
I am workflow learner, I am having theoretical knowledge on it.
Now, I started to practice practically in my IDES server.
I am getting an error message while I am trying to save my standard task with my object type and method and event (which were already created in SWO1).
My error message details.....
Prefix number: entry missing for system EC5 client 800
Message no. 5W023
Diagnosis
Tasks, rules, and workflow definitions require an ID that is unique throughout all systems and clients. In this way, you can ensure that you can transport these objects from one system into another at any time (without restrictions). From a technical point of view, the uniqueness of the ID is ensured by what is known as a "prefix number". You can define a separate prefix number for every system and every client in table T78NR.
System response
If a prefix number is not defined in the client in which you are currently working, it is not possible to maintain (maintenance terminates).
Even I tried to create on entry in the table T78NR, but as that is standard table, I am unable to make an entry.
Hope we have to configure the workflow, I am not having any Basis consultant with me. Can anyone help to cross this problem.
Thanks and Regards,
Surender Batlanki.
Edited by: Surender Batlanki on Oct 15, 2008 2:20 PM

HI Surender and Other SAP Work flow gurus
Surender, u said, that you got the solution.
As honestly speaking i am new to SAP Workflow. Can u please please guide me the instruction and document if any. I am practising in Test Server machine. I will be really happy that if u all GEMS helps me to get out of it.
in Prefix number OOW4, system is asking me to enter, the Prefix number, Interval start, Interval End, and Check Sum.
I entere the same 980 in prefix number, and i dont know what to enter the Interval start and interval end and check sum.
Also there is some msg coming when i tried to manage some values, " NO Intervals can be reserved for this prefix number" - MSg No: 5W179.
Please gurus help me.
Regard
Guru

HT1491 Hi - I am trying to change my payment information but I keep getting the message that my session has timed out. I have turned my phone off but that doesn't seem to help.

Hi - I am trying to change my payment information but I keep getting the message that my session has timed out. I have turned my phone off but that doesn't seem to help.
Does anyone know what I need to do?
Thanks. :-)

What are the exact error codes that are appearing when trying to update?
Have the steps for troubleshooting those errors as listed in the article from which the question was posted been tried?

Process wait SQL*Net message from dblink /SQL*Net message from client

Hi There,
We have an ETL process that we kindly need your help with. The process been running since Sun, where it transfers the data from one server (via remote query). The process was running ok till last night where it appeared
to have stopped working and/or the session is just idling doing nothing.
Here are some tests that we did to figure out what's going on:
1. when looking at the session IO, we noticed that it's not changing:
etl_user@datap> select sess_io.sid,
2         sess_io.block_gets,
3         sess_io.consistent_gets,
4         sess_io.physical_reads,
5         sess_io.block_changes,
6         sess_io.consistent_changes
7    from v$sess_io sess_io, v$session sesion
8   where sesion.sid = sess_io.sid
9     and sesion.username is not null
10     and sess_io.sid=301
11 order by 1;
                    logical   physical
SID BLOCK_GETS      reads      reads BLOCK_CHANGES CONSISTENT_CHANGES
301 388131317   97721268   26687579     223052804             161334
Elapsed: 00:00:00.012. Check there is nothing blocking the session
etl_user@datap> select * from v$lock where sid=301;
ADDR     KADDR           SID TY        ID1        ID2      LMODE    REQUEST      CTIME      BLOCK
684703F0 6847041C        301 DX         35          0          1          0      45237          0
684714C4 684714F0        301 AE     199675          0          4          0     260148          0
619651EC 6196521C        301 TM      52733          0          3          0      45241          0
67F86ACC 67F86B0C        301 TX     458763      52730          6          0      45241          03. Check if the session is still valid:
etl_user@datap> select status from v$session where sid=301;
STATUS
ACTIVE4. Check if there is anything in long ops that has not completed:
etl_user@datap> SELECT SID, SERIAL#, opname, SOFAR, TOTALWORK,
2      ROUND(SOFAR/TOTALWORK*100,2) COMPLETE, TIME_REMAINING/60
3      FROM   V$SESSION_LONGOPS
4      WHERE
5      TOTALWORK != 0
6      AND    SOFAR != TOTALWORK
7     order by 1;
no rows selected
Elapsed: 00:00:00.005. Check if there is anything in long ops for the session:
etl_user@datap> r
1* select SID,SOFAR,TOTALWORK,START_TIME,LAST_UPDATE_TIME,TIME_REMAINING,MESSAGE from V$SESSION_LONGOPS where sid=301
SID      SOFAR TOTALWORK START_TIM LAST_UPDA TIME_REMAINING MESSAGE
301          0          0 22-JUL-12 22-JUL-12                Gather Table's Index Statistics: Table address_etl : 0 out of 0 Indexes done
Elapsed: 00:00:00.00This is a bit odd!! This particular step have actually completed successfully on the 22nd of July, and we don't know why it's still showing in long opps!? any ideas?
6. Looking at the sql and what's it actually doing:
etl_user@datap> select a.sid, a.value session_cpu, c.physical_reads,
2 c.consistent_gets,d.event,
3 d.seconds_in_wait
4 from v$sesstat a,v$statname b, v$sess_io c, v$session_wait d
5 where a.sid= &p_sid_number
6 and b.name = 'CPU used by this session'
7 and a.statistic# = b.statistic#
8 and a.sid=c.sid
9 and a.sid=d.sid;
Enter value for p_sid_number: 301
old   5: where a.sid= &p_sid_number
new   5: where a.sid= 301
             CPU   physical    logical                                   seconds
SID       used      reads      reads EVENT                             waiting
301    1966595   26687579   97721268 SQL*Net message from dblink         45792
Elapsed: 00:00:00.037. We looked at the remote DB where the data resides on, and we noticed that the remote session was also waiting on the db link:
SYS@destp> select a.sid, a.value session_cpu, c.physical_reads,
2 c.consistent_gets,d.event,
3 d.seconds_in_wait
4 from v$sesstat a,v$statname b, v$sess_io c, v$session_wait d
5 where a.sid= &p_sid_number
6 and b.name = 'CPU used by this session'
7 and a.statistic# = b.statistic#
8 and a.sid=c.sid
9 and a.sid=d.sid;
Enter value for p_sid_number: 388
old   5: where a.sid= &p_sid_number
new   5: where a.sid= 390
       SID SESSION_CPU PHYSICAL_READS CONSISTENT_GETS EVENT                                                    SECONDS_IN_WAIT
       390         136              0            7605 SQL*Net message from client                                        46101
SYS@destp>We have had an issue in the past where the connection was being dropped by the network when the process runs for few days, hence we have added the following to the sqlnet.ora and listener.ora files:
sqlnet.ora:
SQLNET.EXPIRE_TIME = 1
SQLNET.INBOUND_CONNECT_TIMEOUT = 6000
listener.ora:
INBOUND_CONNECT_TIMEOUT_LISTENER = 6000What else can we do and/or further investigate to work out the root cause of the problem, and may be help resolve this. We don't want to just stop and start the process again as it took few days already. We have
had a chat to the infrastructure team and they've assured us that there have been no network outages.
Also, the alert logs for both instances (local and remote) shows no errors what so ever!
Your input is highly appreciated.
Thanks
Edited by: rsar001 on Jul 25, 2012 10:22 AM

Ran the query on both local/remote db, and no rows returned:
etl_user@datap> SELECT DECODE(request,0,'Holder: ','Waiter: ')||vl.sid sess, status,
2 id1, id2, lmode, request, vl.type
3 FROM V$LOCK vl, v$session vs
4 WHERE (id1, id2, vl.type) IN
5 (SELECT id1, id2, type FROM V$LOCK WHERE request>0)
6 and vl.sid = vs.sid
7 ORDER BY id1, request
8 /
no rows selected
Elapsed: 00:00:00.21

Error in posting message to BPEL process instance

Hi
There is following Error associated with BPEL Process while invoking another BPEL Process called-Request For Invoice Information The SOA Server Log associated with this error is as follows-
[2012-11-06T10:08:37.157+05:30] [soa_server1] [ERROR] [] [oracle.soa.services.workflow.task] [tid: [ACTIVE].ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 74be42f58e7a71c3:-749bd11d:13abbc92686:-8000-000000000000c717,1:31260] [APP: soa-infra] <.> Error in posting message to BPEL process instance.[[
Error in posting message to BPEL process instance 200458 for callback operation onTaskCompleted. The task is associated with workflow default/RequestForInvoiceInformation!1.0/RequestForInvoiceInformationHumanTask.
This could be caused if the BPEL instance is terminated. If it is not, this is possibly a system error.
ORABPEL-30015
Error in posting message to BPEL process instance.
Error in posting message to BPEL process instance 200458 for callback operation onTaskCompleted. The task is associated with workflow default/RequestForInvoiceInformation!1.0/RequestForInvoiceInformationHumanTask.
This could be caused if the BPEL instance is terminated. If it is not, this is possibly a system error.
     at oracle.bpel.services.workflow.task.impl.WorkflowCallback.onTaskComplete(WorkflowCallback.java:113)
     at oracle.bpel.services.workflow.task.impl.TaskService.invokeCallbacks(TaskService.java:6911)
     at oracle.bpel.services.workflow.task.impl.TaskService.performPostActionOperation(TaskService.java:7628)
     at oracle.bpel.services.workflow.task.impl.TaskService.localHandleRoutingSlipInterpretationResult(TaskService.java:3564)
     at oracle.bpel.services.workflow.task.impl.TaskService.handleRoutingSlipInterpretationResult(TaskService.java:3688)
     at oracle.bpel.services.workflow.task.impl.TaskService.evaluateRoutingSlipTaskAssignment(TaskService.java:3490)
     at oracle.bpel.services.workflow.task.impl.TaskService.updateTaskOutcomeAndEvaluateRoutingSlip(TaskService.java:3445)
     at oracle.bpel.services.workflow.task.impl.TaskService.updateTaskOutcome(TaskService.java:3153)
     at oracle.bpel.services.workflow.task.impl.TaskService.updateTask(TaskService.java:2011)
     at sun.reflect.GeneratedMethodAccessor1826.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
     at java.lang.reflect.Method.invoke(Method.java:601)
     at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
     at oracle.bpel.services.workflow.common.WorkflowServiceCacheEventAdvice.invoke(WorkflowServiceCacheEventAdvice.java:91)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at oracle.bpel.services.workflow.test.workflow.ExceptionTestCaseBuilder.invoke(ExceptionTestCaseBuilder.java:155)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at oracle.bpel.services.common.dms.MethodEventAspect.invoke(MethodEventAspect.java:70)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at oracle.bpel.services.common.dms.MethodPhaseEventAspect.invoke(MethodPhaseEventAspect.java:82)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
     at $Proxy246.updateTask(Unknown Source)
     at oracle.bpel.services.workflow.task.ejb.TaskServiceBean.updateTask(TaskServiceBean.java:214)
     at sun.reflect.GeneratedMethodAccessor1825.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
     at java.lang.reflect.Method.invoke(Method.java:601)
     at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.oracle.pitchfork.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:34)
     at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
     at com.oracle.pitchfork.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:42)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
     at $Proxy307.updateTask(Unknown Source)
     at oracle.bpel.services.workflow.task.ejb.TaskServiceBean_399vcw_EOImpl.__WL_invoke(Unknown Source)
     at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:40)
     at oracle.bpel.services.workflow.task.ejb.TaskServiceBean_399vcw_EOImpl.updateTask(Unknown Source)
     at oracle.bpel.services.workflow.task.ejb.TaskServiceBean_399vcw_EOImpl_WLSkel.invoke(Unknown Source)
     at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:667)
     at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:230)
     at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:522)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
     at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:518)
     at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused by: java.lang.NullPointerException
     at oracle.fabric.CubeServiceEngine.post(CubeServiceEngine.java:626)
     at oracle.integration.platform.blocks.mesh.AsynchronousMessageHandler.doCallbackPost(AsynchronousMessageHandler.java:76)
     at oracle.integration.platform.blocks.mesh.MessageRouter.post(MessageRouter.java:195)
     at oracle.integration.platform.blocks.mesh.MeshImpl.post(MeshImpl.java:215)
     at sun.reflect.GeneratedMethodAccessor1589.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
     at java.lang.reflect.Method.invoke(Method.java:601)
     at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
     at oracle.integration.platform.metrics.PhaseEventAspect.invoke(PhaseEventAspect.java:71)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
     at $Proxy310.post(Unknown Source)
     at oracle.bpel.services.workflow.fabric.WorkflowServiceEngine.postToMesh(WorkflowServiceEngine.java:1560)
     at oracle.bpel.services.workflow.fabric.WorkflowServiceEngine.doCallback(WorkflowServiceEngine.java:1683)
     at oracle.bpel.services.workflow.task.impl.WorkflowCallback.postToFabric(WorkflowCallback.java:346)
     at oracle.bpel.services.workflow.task.impl.WorkflowCallback.onTaskComplete(WorkflowCallback.java:109)
     ... 58 more
Thanks
Snehal

The log entry shows that user : WALMART is missing on your user-properties.xml file.
Please check that you have this user properly configured with jazn. Which version of BPEL you are using and what are the changes you are trying to do to the deployed project ?

Nokia 301 Feature Request: Missed calls/messages n...

Hi,
I just bought a Nokia 301 dual sim phone. I'm satisfied with it except one thing - IT DOESN"T HAVE MISSED CALLS/MESSAGES NOTIFICATION. How come such important and basic function not implemented? No one will check his phone regularly and there is no way to know wether I have missed calls or messages. It should keep making a beep until I read it. I believe this function could be implemented easily in software, even by polling the status at a constant interval or setting up a counter which issues interrupts. Any Nokia staff can answer this questtion?
Thanks.
Leonard

This is a feature which the majority of phone users do not want, and that's why Nokia phones have not done it since the early 2000s when Nokia phones used to beep the morse code for SMS.
There are two primary reasons why a person might not read a message at the time it comes in:
He didn't hear it, maybe he was in a noisy place and didn't hear or maybe the phone is in a different room.
He heard it but was prevented from reacting by other circumstances.
If you are away from your phone, there are visual cues when you get back to it that a message has come in. If you are walking down a busy street with your phone in your pocket, there is also in the vast majority of phones a vibrate option to give an alternative kind of notification. If you are driving a car responsibly on a journey of some length, it would becoming annoying after a while if your phone was beeping in your briefcase in the back of the car, or if you leave your phone on your desk at the office whilst you are elsewhere, the repeated beeping could be just as annoying to other people.
If this or any post answers your question, please remember to help others by pressing the 'Accept as solution' button.

Dataguard Error in logs Unable to post result to client, status = ORA-16531

Hi,
we are getting the following error message in the data guard logs:
===================================================================
DG 2012-01-23-17:39:44 0 2 0 DMON: Failed to publish large message. Error is 0xffffff81
DG 2012-01-23-17:39:44 0 2 0 Status = ORA-00000
DG 2012-01-23-17:39:44 0 2 0 Severity = ORA-00000
DG 2012-01-23-17:39:44 1000 2 771584732 Unable to post result to client, status = ORA-16531
DG 2012-01-23-17:39:45 0 2 0 DMON: Failed to publish large message. Error is 0xffffff81
DG 2012-01-23-17:39:45 0 2 0 Status = ORA-00000
DG 2012-01-23-17:39:45 0 2 0 Severity = ORA-00000
DG 2012-01-23-17:39:45 1000 2 771584747 Unable to post result to client, status = ORA-16531
DG 2012-01-23-17:39:45 0 2 0 DMON: Failed to publish large message. Error is 0xffffff81
DG 2012-01-23-17:39:45 0 2 0 Status = ORA-00000
DG 2012-01-23-17:39:45 0 2 0 Severity = ORA-00000
DG 2012-01-23-17:39:45 1000 2 771584756 Unable to post result to client, status = ORA-16531
===============================================================================
This is the LIVE system working properly, but i saw this error message in the logs and when i searched lot of sites for the ORA-16531,i got the reply as "COntact Oracle".
COuld you please anyone incase faced this error in data gurad server, share your experience here?
Server : Sun SOlaris SParc Netra -T2000
Database : Oracle 10g
# FDSCluster info
Cluster: vs2b
Member: Member1
User: fdsuser
Data Path: /var/opt/fds
Status: Running
# srvctl status asm -n `hostname`
ASM instance +ASM2 is running on node vs2b.
Guys please gimme some clue why iam getting this error mesage and what need to be done?
Regards,
Deeban

This is the LIVE system working properly, but i saw this error message in the logs and when i searched lot of sites for the ORA-16531,i got the reply as "COntact Oracle".Please log a SR.
Thanks,
Hussein

Missing post message in client session monitoring

Similar Messages

Maybe you are looking for