Missing program in development...

hi all...
i face a weird problems in developing program...
this morning i make a changes to my program and i save it in one request.. before i take a break i double checking the program whether i save it or not... the program already save and in the request...
after break.. i try to open my program again but i got a message 'the program name does not exist'...
how can i retrieve my program again...? the program name is still inda request but it state dat my program doesn't exist
help me

Hi,
If u feel tht ur program is still in the same request then u can retriev them since u have not releaesed them . Got o Tcode :se09  check in the transport request whcih u were storing there u can retrive ur program. check this it might work.....
Regards,
Sana.
Reward points for helpful answers!

Similar Messages

  • Windows 7 (64bit) Missing programs in uninstall a program list.

    Hi,
    My grandson likes to play internet games and downloads quite a number of them from time to time, and as usual, it leaves me uninstalling quite a lot of add-ons and other types of unwanted files. Toolbars, vius protections, etc. You name it...and it's been unloaded by yours truly.
    I had stopped this for the longest time, but allowed him to download one more "Wizards 101" a couple of days back, and our pc has been acting super slow, freezing up etc...ever since.
    So I just finished deleting several unwanted  files in the "uninstall programs" department, and once it was completed, I had to change to  another account momentarliy.... but when I returned, I checked  it again to make sure everything was ok, I found only 14 programs listed.
    The  normal list is always qutie long (a full page scroll down) and list nearly every important program I have. 
    I have check every other account I have and it is the same on everyone.
    I was very careful to uninstall nothing but the juck files and so I have absolutely no clue as to what is happening here. All my programs appears to be working ok, so far anyway,  except for the missing info in uninstall programs list.
    I have ran full system virus scans (seven tracking cookies only) and tried every usual method of maintinace I know.
    This has me stumpped. If anyone knows a thing or two about this kind of problem, I'd appreciate some advice.
    And would also appreciate some advice to my grandson who will read this as well. He and I are always at odds about the dangers of downloading internet games and he just might believe someone else beside his grandpa. (lol)
    Any advice will be truly appreciated.
    My desktop is HP Pavilion slimline
    Mod s5503w
    OS=windows 7 Home Edition (64bit)
    service pack 1
    This question was solved.
    View Solution.

    Boramfan87, welcome to the forum.
    You are absolutely correct about the dangers of downloading games and any other programs from the Internet.  In fact, I have discontinued downloading any FREE programs.  If I do, however, I use the Custom Install option.  This allows me to check to see if any unwanted programs are being added to my computer without my knowledge.  This happens all of the time.
    Now, for advice for you, Grandpa.  You can setup an account for your grandson.  This will allow you to set Parental Controls to keep certain types of programs from being added to your computer: Control Panel / User Accounts / Manage another account / Set up Parental Controls.  Also, you can protect your account by adding a Password.  Just make certain that you write it down somewhere so you can remember it.  It will be embarrassing when you have to tell grandson that you forgot your password established to keep him out of your business.
    It sounds to me like you may have inadvertently selected some programs and deleted them.  I can't think of any way to make programs disappear from the "Uninstall or change a program", otherwise.  You will have to reinstall any missing program.
    Please click the "Thumbs Up+ button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • For some reason the "Basic" tab is missing in my Develop folder when trying to edit using LR5..? Plz Help

    For some reason the "Basic" tab is missing in my Develop folder when trying to edit using LR5..? Plz Help

    Right-click (Mac Cmd-click) on another panel header such as "Tone Curve". Make sure there is a checkmark for Basic as was all other panel sections that you want displayed.

  • Error: REPORT/PROGRAM statement missing , program type is I (include).

    Hi,
    I have created a REPORT Program (Z Program) and also created a TOP INCLUDE. I am NOT using Function module. When I tried to syntex check the INCLUDE, system is giving
    following error:
    REPORT/PROGRAM statement missing, program type I (Include).
    Can you help me in resolving this error.
    Currently TOP include has only one statement to declare a Constant.
    Thanks,

    hi,
    take your program in se80.
    double click on the program name. Right click on it and press Activate. All the include will get activated and the problem will get solved.
    Regards,
    Renjith Michael.
    http://www.sourceveda.com/

  • Hi, Accidentally somebody screw up Photoshop CS4 and InDesign CS4 Master edition on a MAC computer in the school. The install discs did not start to run therefore I can't  reinstall the 2 missing programs. I want to install the softwares, therefore I down

    Hi, Accidentally somebody screw up Photoshop CS4 and InDesign CS4 Master edition on a MAC computer in the school. The install discs did not start to run therefore I can't  reinstall the 2 missing programs. I want to install the softwares, therefore I download those from here.  The downloaded program refuse to accept the serial number which was given to the school when they purchased the Master Collection CS4 MLP A00. Thank you for your help, in advance.

    Hi Jeff,
    Thank you. I am a little bit busy at work, sorry for the delayed reply. I tried to solve the problem, but it still exists. The 3rd of the Adobe disk is damaged someway. I tried to run on my mac at home and it has a failure. So I think we have no other choice that to download the full pack of master collection. I had a discussion with the IT expert and he figured out that company does not exist any more from where they purchased the Adobe Master Collection for Mac and PC. So If you would be kind to help me, what kind of information ID or any kind of document would be needed to identify the purchaser institute (us). I don't think any of us has an account at the Adobe. I will try to figur out. I desperately need to replace Photoshop and InDesign as without them it's really harsh to teach the kids fot the graphic design.
    Sincerely yours.
    Peter

  • Why is the "basic" edit option missing from the develop module?

    why is the "basic" edit option missing from the develop module?

    http://www.lightroomforums.net/showthread.php?19775-Missing-Panels-Modules

  • Why my LV 8.6 (Englsih version in WIN 7 English OS) can not open programs I developed under LV (Chinese version)

    Hi,
    I just installed  LV 8.6 (English version) in my new laptop (WIN 7 English OS). I found under LV 8.6 environment I can not open some programs I developed using LV 8.5 (Chinese version). These programs are saved in folders with Chinese names (subvis for some programs have Chinese names). If I take these programs on the desktop and chang the Chinese name into number or English name I can open them usingL LV 8.6. However, all Chinese words in opened programs can not be identified. 
     What should I do?
    Thanks.
    wang

    I was replying into a recent message thread where the user posted a VI that had some oriental characters in the VI name and I was not able to open it as a result until I saved the file and renamed it using normal alphabetical characters.  It is not a problem with LabVIEW but with windows not knowing what to do with a strange character set.
    The only solution I know is to go change your file and folder names so they don't use chinese characters.  You could also try opening them on a chinese version of Windows.  Maybe Microsoft has some download you can install that will allow english Windows to work in a chinese environment.

  • I tried to update the last itunes, but the error message says there is a missing program to finish the update. But it doesn't tell what program.

    I tried to update the last itunes, but the error message says there is a missing program to finish the update, but it doesn't list what program is missing. I have never had issues in the past updating a new iTunes.

    "There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support perssonel or package vendor."
    That's perfect, thanks.
    Let's try the following user tip with that one:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

  • Missing programs after reinstall

    I use my computer for graphic design for work. The computer guys "wiped out" all the programs so that I could install my own programs registered to me. After they put in the OS, I am missing programs that came on the Mac originally, like iDVD, iPhoto, iMovieHD... How do I get those back? They tried several times to use the disk that came with the computer, but no luck.
    Can anyone help?
    Thanks
    Di

    They can use Pacifist to install only those programs from the original disc that came with the computer. I believe you use the "Open System Packages" or something similar to get the iDVD, iPhoto, etc. packages available for install.

  • How to recover a missing program

    Hi guys
    Im facing an issue on our SLM system where one of the Z programs is missing. I've checked on SE38 and the program is not listed. I have tried to check on Version Management but there are no previous versions.
    The only activity was a EHP 1 Upgrade, but there are no indications where this program  was modified or deleted.
    I've checked the table TADIR and is present. Also checked table TSTC for the transaction name ZPWC and is also in there.
    Since i dont have the original transport since its was brought from an external system, I'd like to check with you guys any idea on how to recover this program. I dont have any clue on how is missing since its not a developement system.
    Any recommendation on how to restore/find this program, would be highly appreciated.
    Martin
    PS: Also Checked in table VRSD if there is an entry with OBJTYPE = u2018REPSu2019 and OBJNAME = name of the deleted program and no luck.
    Edited by: Martin Simois on Jan 5, 2011 7:06 PM

    I think you will have to go back to the original development system. The versions will be there.
    Rob

  • Win 7 "Default Programs" does not include MS Office 2007 Programs, the missing Programs are missing ICONs as well

    I installed Windows 7 in an upgrade from Windows XP.  As part of the process MS gave me a URL to download a Office 2007 Pro I could activate with the license key I owned.  I got similar URLs for Visio Professional and Project Professional. 
    Downloaded, installed, activated, started the programs.
    From the beginning some of the icons were missing.  Like the icons for Word, Excel, Access, Outlook, Power Point, Publisher, Visio, and of course Project.  I tried most of the answers in this forum, that didn't sound like guesswork, and none of
    them solved either problem.  There must be at least 65 guesses to fix the icon problem, but none with the missing Default Programs problem.
    The programs related to the missing "Default Programs" still work, they startup when you select the related document.  If I check "Associate a File Type or Protocol with a Specific Program" the missing Office 2007 programs are listed
    there, associated with the designated programs, but are missing icons.
    I make it a habit not to pay a vendor for a product so that I can have the privilege of fixing the vendor's problems.   Google tells me these are well known problems.  The only thing missing is the answer.  I won't ever use MS chat or telephone,
    because all they do is tell me why they can't help and transfer me elsewhere.
    Does anyone have a REAL answer please?

    To restore office icons you could try this method
    http://transitionmarketing.wordpress.com/2013/01/16/restoring-microsoft-office-icons/
    I had the same problem with Office 2010 programs not showing in "Set Your Default Programs". No other "fixes" (including repair) worked. Found this thread:
    http://www.sevenforums.com/microsoft-office/222503-office-2010-not-listed-default-programs.html
    and used it as a guide. When you look at this key
    HKEY_LOCAL_MACHINE\SOFTWARE\RegisteredApplications
    you will see a list of software pointing to another HKEY_LOCAL_MACHINE registry key. For example, my Word program was showing up as "Word.Application.14" and pointing to Software\Clients\Word Processing\Microsoft Word\Capabilities
    (In contrast, PastorMike's fix in the link above advocates making a new entry under HKEY_LOCAL_MACHINE\Software\Microsoft\Office\14.0\Word\Capabilities. However, OneNote did appear in my "Set Your Default Programs" and it - and the other Office programs
    - were listed under ..\Software\Clients\... and not ...\Software\Microsoft\...)
    So at this point I went my own way (although maybe PastorMike's fix would also work).
    The difference between OneNote and the other programs was the existence of values for "ApplicationName"  and "ApplicationDescription" in HKEY_LOCAL_MACHINE\Software\Clients\Word Processing\Microsoft Word\Capabilities. Also, for OneNote
    there was a "FileAssociations" sub-key that was missing from the other programs.
    It is setting the values for ApplicationName and ApplicationDescription which cause the program to show up in the list in the left pane of "Set Your Default Programs". And it is the file associations in the FileAssociations key that allows resetting
    associations en masse when they are snaffled by another program.
    Below is the reg file I added for Word 2010. (i used similar for the other programs) After doing this, Word appeared after reopening "Set Default Programs" - no reboot required
    Windows Registry Editor Version 5.00
    [HKEY_LOCAL_MACHINE\SOFTWARE\Clients\Word Processing\Microsoft Word\Capabilities]
    "ApplicationDescription"="Create and edit professional-looking documents such as letters, papers, reports, and booklets by using Microsoft Word."
    "ApplicationName"="Microsoft Word 2010"
    [HKEY_LOCAL_MACHINE\SOFTWARE\Clients\Word Processing\Microsoft Word\Capabilities\FileAssociations]
    ".doc"="Word.Document.8"
    ".dochtml"="wordhtmlfile"
    ".docm"="Word.DocumentMacroEnabled.12"
    ".docmhtml"="wordmhtmlfile"
    ".docx"="Word.Document.12"
    ".docxml"="wordxmlfile"
    ".dot"="Word.Template.8"
    ".dothtml"="wordhtmltemplate"
    ".dotm"="Word.TemplateMacroEnabled.12"
    ".dotx"="Word.Template.12"
    ".htm"="wordhtmlfile"
    ".html"="wordhtmlfile"
    ".odt"="Word.OpenDocumentText.12"
    ".rtf"="Word.RTF.8"
    ".wbk"="Word.Backup.8"
    ".wiz"="Word.Wizard.8"
    ".wll"="Word.Addin.8"
    By using my ramblings and the link provided above you may be able fix the problem you are having with Office 2007. However, I am unsure of how to find the necessary file associations for Office 2007 except by trawling through your registry for the filetypes
    listed in the link above and the values for them in HKEY_CLASSES_ROOT.

  • Can't install Safari 4, missing program (?)

    I'm trying to go to Safari across all the PCs and Macs in the household (two of each), but my desktop has a problem.
    When I run the installer, it runs for a while and then an error dialog pops up
    "There is a problem with this Windows Installer package.
    A program required for this install to complete could not
    be run. Contact your support personnel or package vendor."
    After which it just rolls back.
    There are no clues as to what the missing/non-running program could be, so I have no idea where to start.
    Any ideas?

    I suffered this same error. I found the culprit to be a corrupt installation of apple software update. My solution was to edit the windows registry. I searched for "applesoftwareupdate" and deleted all associated keys. Installation of safari 4 proceeded to completion. And yes i verified the folder "c:\windows\programs files\apple software update" was also installed.

  • HELP! - Missing programs after hard reset - N80

    Hello,
    N80 on orange with the usual problems. Spoke to Orange who tried to pass me off with the 'over the air' update. Still no joy..
    They asked me to do a hard reset (*#7370#) which I have done but I am now missing
    Office program
    Catalog icon
    I backed up the phone (before the reset) and also restored this but they are still missing.
    Any help would be grand
    Thanks
    Jason

    No tried that one yet....the over the air thing seems a bit of fob off to me (I asked how they would do it and they said Nokia would do it as they have our imei no.s).......they are calling me back next week.....will let you guys know what the excuse is next time !

  • Visual Studio 2008 with BizTalk 2009 Missing Assembly Reference - Developing under Windows7

    I'm having a similar issue to this....> http://social.msdn.microsoft.com/Forums/en-US/2df94010-5755-4982-a02d-81f8feb51fda/visual-studio-2008-with-biztalk-2009-missing-assembly-reference?forum=biztalkgeneral
    Prior to going to Win7, I was developing on a Win-XP machine. I used to delete the generated code and have VS generate it again, but no luck. I get errors in the Build, similar to what shows in the Message Assignment shape in the orc. It's complaining about
    a missing part of a Multi-part message.  Oh, and the Multi-part message is a schema created in VS2005/BizTalk2006 R2, which was created on a separate Win-XP machine.
    Just wondering if anyone has come up with a fix to this? The previously documented entry did not seem to have a solution.
    Thanks.

    Jeff,
    Do you see your_orchestration.odx.cs ?
    If you do Can you try as following:
    1. Take backup of whole solution
    2. Delete all .cs files associated with biztalk artifacts, like odx.cs, xsd.cs, btm.cs
    3. Open orchestration and in any one of the expression shape copy all statements.
    4. Click OK to close the Expression window.
    5. Build the solution. (you should get errors)
    6. Goto expression and paste code.
    7. Build
    This has worked for me in past. May be it will work for you too.
    If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful.

  • Missing controls in Develop module - crop etc

    They were there a couple of days ago but for the last few sessions the group of controls (including crop etc) that sit under the main image in the Develop module have gone missing.
    I've been playing with the 'view' options without success and it seems that they are not coming back of their own volition.
    Any help appreciated.
    Thanks
    Scott Hortop

    Thanks - I tried options on the view menu but missed the obvious one at the top.

Maybe you are looking for