Missing quick swipe buttons on takes folders.

I recorded a few tracks and discovered the missing buttons when trying a quick swipe to compose a track in Logic X. Anyone else experiencing this?

Okay! That was a typo (That meant folders), however, menubar and dock are not missing. Its the indicators on the buttons that are missing. In sense the arrows on the forward/backward buttons in Safari (the ones on the left side top) and the speaker symbol on the menu bar (its hidden) as the sound adgustment part works fine, except for the indicaor which has disappeared for some reason.
And, is there any other alternative apart from using Repair-disk? As it doesn't solve the problem.
Anyways thanks Sig!

Similar Messages

Missing Quick Look Button

I just installed Snow Leopard and noticed that my Finder has no Quick Look Button. Does anyone know why it's not there and how I can get it back? I know I"m supposed to have one.........please help

control-click on the toolbar of any finder window and select "customize toolbar". drag the quicklook button back to the toolbar.

No Quick Swipe Comping Button.

Hi, i have logic pro 9, but when I record some takes in cycle mode, I cannot edit these takes
with quick swipe comping, there is no button or function when I go the right triangle.
can anybody help? best regards toni

Same problem here. Can't find any info in the manual or online. The manual has all these great things you can do with comp folders but does not address the situation where the "quick swipe comping" icon is missing.

Audio playback issues when editing quick swipe comp folders.

My new Imac running ML 10.8.2 is having issues when I want to edit drums tracks that I have grouped together. I recorded the tracks before grouping them. After opening group settings and checking the 'editing (selection)' and 'phase locked audio boxes' I get a spinning beach ball for 10sec. I then expand my take folders to start editing and the computer performance becomes very sluggish and playback stutters and crackles, sometimes turning well recorded drum tracks into a non recognizable mush as various tracks are playing at once. It appears that when I group the tracks together prior to recording and check the necessary boxes that quick swipe editing works fine. When I open old projects on my new iMac that were recorded running Snow Leopard and my old MacBook Pro that use comp editing, it all works smoothly and I can continue editing no problems. So does this mean that these new tracks are somehow corrupted? How can I rescue them? I can't figure it out! I used to be able to set up groups and edit after recording raw on my old setup, surely this is some kind of bug caused from the upgrade to 10.2.8 and/or Logic 9.1.8? It's nothing to do with my Pro 40 interface I don't think as I unplug it and the problem is still audible through built in speakers. Might the recording be corrupt due to connecting Saffire pro 40 via a firewire 800 to thunderbolt adapter?
I've tried copying/pasting regions into a new project, the regions are all the same length, there are no plugins on the channel strips, the recordings sound fine until I try to edit them, sample rate is consistent (24/48). The main difference to making editing possible seems to be grouping prior to recording or not, which shouldn't make a difference should it? Anyone who can shed a little light on this situation, I will be forever appreciative to! I've got work that needs doing ASAP!
My setup is:
iMac, i7 3.1Ghz, 16GB RAM, 1TB HDD, Mountain Lion 10.2.8
Logic Pro 9.1.8
Focusrite Saffire Pro 40 (connected to thunderbolt port via thunderbolt==>firewire 800 adapter)

Anyone?
This is serioulsy BS, it was all working fine before I went and upgraded everything and now it is worse than prior to upgrading. That's not how it's supposed to work.

Quick-swipe comping-Miditracks

Hello,
I’m puzzled because I’ve got multiple take folders set up, but theres no option for quick-take comping in the menu, and no quick-take comping icon in the region.
Is this because I am on a midi-track..? (Maybe one cannot quick-swipe comp on a midi-track..?)
Many thanks!

Correct--unfortunately, swipe comping is not supported with MIDI tracks.
Please file a feature request:
http://www.apple.com/feedback/logicpro.html
In my opinion, MIDI overdubbing is the biggest weakness currently in Logic: the only way to compile a take from multiple overlapping MIDI regions is to create multiple tracks and tediously scissor cut and mute sections. IMO, Logic badly needs to upgrade MIDI editing to mirror audio editing:
1) Allow left and right edge of a MIDI region to be dragged around to show/play and hide/mute MIDI notes.
2) Provide a bin/list of MIDI recordings, so regions can be conveniently stored and retrieved.
3) Support swipe comping for MIDI tracks.
#3 would be an awesome feature--I'm not aware that any other platform allows this. But #1 and #2... frankly, I'm not aware of ANY other DAW that *lacks* those features. Logic badly needs to catch up with MIDI region editing and management.
-James

Quick Swipe Comping not working

I've recorded a few takes of a vocal. The takes show up as a comp, with the disclosure triangle in the upper left and the comp menu in the upper right. But I can't drag any selections in the takes to edit the comp via quick swiping. This used to work just fine and now it just doesn't. The pointer never changes to the quick swipe cursor when I point at the edge of a selection where one take ends and another take begins. It's baffling. Anyone have an idea what I could be missing?

I also am experiencing this problem. Quick-swipe comping does not work, and then I copy into a new project and it works again. Closing and opening the project back does not fix, rebooting computer does not fix. I have been getting around it by manually dragging a copy of each take from the "Audio Bin" sidebar tab into new tracks in the arrange window, and then doing old-fashioned slicing and comping from there. This has only been happening to me recently (the earliest i can pin it down is maybe jan or feb. 2010).
For some reason, the problem-take shows up in the Audio Bin tab (& Audio Bin window) with a little lock symbol by it. I looked this up in the user manual (p.292) and it says the lock signifies a "protected" region, which means you can't change the start or end points of the file. This would explain why we can't do quick-swipe comping. However, the manual states you can unlock the region by going to the Audio Bin window (not the tab) and clicking on the lock. THIS IS NOT WORKING. I can lock or unlock other takes at ease, but i cannot unlock my problem take.

Ideas for Adding a Quick Print Button to VA01 Overview Screen

Problem Statement:
Our users would like a "quick print" button on the VA01/VA02 application toolbar that immediately spools the Order Confirmation output to the printer. Our users want to print the output on demand, i.e., they do not want the output to automatically be printed when the order is created because a printout is not always needed. We already have condition records created with Dispatch Time set to 3 - Send with application own transaction. However, it takes 7 or more clicks to print the output on demand by navigating the menu (Extras > Output > Edit...Further Data...etc.) and changing the Dispatch Time to 4 - Send immediately when saving. This is a big ergonomic issue and a time killer.
Although the number of clicks to print are less when printing the output from the VA02 initial screen (via menu Sales document > Issue Output To), this is not acceptable when creating new orders. Really need an on-demand, quick print button on the VA01 screen. As an aside, we have a totally custom transaction for preparing sales order data (shopping cart-like way of finding materials and entering required data) that then calls VA01 and fills in all of the information. When saving in VA01, the user is returned to our Z-transaction so asking the user to subsequently run VA02 to print is not practical.
Current Output Determination:
We have custom output type ZBS0 (copy of BS0). Condition records for print medium are set to Dispatch Time = 3.
Questions:
1. Searching these forums, it appears custom code (extension or user exit?) can be written to call RSNAST00, or something similar, to automatically send output having a Dispatch Time = 3. Where can I find more information on exactly how to do this?
2. Do transactions VA01 and VA02 (Overview screens) have extensions that allow a print button to be added to the application toolbar? We would want to call the custom printing code from the button to send the output.
Any feedback on how others have solved this problem would be greatly appreciated.
Warm Regards,
Rob
P.S. Using GuiXT is not an option for us.

HI
We had similar issues with printing packing list and picking list by the warehouse people.
We created a new ztransaction with input fields of delivery number, output type, number of copies and a check box for repeat output(in case if the output was already printed).
You can also create a new Z-transaction with input fields of Sales order number(mandatory field), output type (Default it with value of ZBS0), number of copies (default it with 1) and a check box. On executing the transaction You can provide a message if the output was already printed so that the user can select the check box to repeat the output and execute. You can also print multiple SO by giving a range value if required.
If you do not want the user to enter the new ztransaction every time, try providing a menu path to the new z-transaction from the existing z-transaction which you are using for order entry.
Hope this helps you.
Thanks,
Arun.S

Quick launch buttons and touch functions not working post win7 upgrade

I have several problems that I think are related.
1) When I rotate the screen and then bring it close (as in flat) to the keyboard, the screen goes blank. There is no key combination I can find that restores the screen. Putting it back in notebook orientation doesn't do anything either. Only thing to do is a hard reboot.
2) the quick launch buttons on the screen edge are not functioning as follows:
a) the hp mediasmart button (the one with the wave) doesn't work
b) the screen rotation button produces the same problem as 1) above
c) the third button which looks like either gears or a sun (I don't know what it should do) brings up the windows mobility center, where I have found problem number:
3) On tablet PC settings, the display tab, there is one display: 1. mobile PC display
on the same tab, there is a setup button. The next screen says:
pen input
touch input
Regardless which one I select, on the following screen (where it says Press this screen with ....) when I press with either my finger or the pen, nothing happens. Which seems like either:
it thinks another screen is active or
the touch components are completely non functional.
4) Not surprising, the touch functions are completely non-functional
I have installed all of the drivers for this TX2-1025dx for Win7(64bit) per the HP support/drivers page.
Not all of them resulted in a clean install.
Here are other drivers that I had problems with (meaning that I got an error message, it failed, it had to be done more than once, something else broke, etc.)
AMD AHCI - started catalyst installer then failed
Authentic fingerprint driver - "dpinst64 not marked for installation"
Ntrig Duosense - had to do this one multiple times to get the fingerprint reader to work
HP Mediasmart MVP - hung in CMD
I have checked that all of the startup services are actually enabled in msconfig including quick launch buttons, hpwuschd, and media smart. Nothing is disabled in services.
I have reinstalled the quick launch buttons driver for this product from December 2009. (There is an earlier version from November.)
I installed the bios upgrade (before win7, actually) it is currently F.25
I have also eliminated EMF possibilities.
I have searched the forums, and while I have found some interesting clues, I don't see anything like this - at least with a solution.
Any assistance would be greatly appreciated as this thing is quite useless to me as it currently functions. It is not a tablet anymore.
TIA

[knock knock] Helloooooo??!!??
Installed 6.50.9.1, which is in between the last two quick launch button (QLB) drivers (that did not work). Also fixed the lightscribe and mediasmart DVD installs. Same problems, no touch or pen, and a new bug I discovered with qlb
First, if you search for tablet in the start menu, there is a selection to set the tablet buttons to perform certain tasks. When you run that, it says that teblet buttons are not installed on this pc. Doesn't matter if QLB is installed or not - same error. Hmmmmm. Check with your pc manufacturer..... I think I am doing that. I am starting to feel like I am working for HP.
Next finding: Using mobility center, I found that if you orient the screen to landscape for the slate config, and then rotate the screen, it does not go blank. However, if you rotate the screen back to notebook, it goes blank. And of course it keeps that upsidedown config when you reboot, too. So, the way to recover from that (because you really need a keyboard if you don't have a working pen and touch takes 30 sec to respond) is to keep trying to get touch to orient the screen back to landscape for notebook. Then rotate the screen to landscape for notebook. And uninstall the QLB driver that doesn't work and reboot. But after that, touch and pen did not function.
Since touch and pen had previously been restored when I uninstalled QLB, I reinstalled MVP and smartmenu coz they were the actions that I took the last time before touch and pen returned. Didn't work this time, tho.
I decided to do a system restore back at the point that I had used HP Advisor, since that was the last time I made note that pen and touch were working. Restore failed because a sfi.dat file was not found (and search didn't find it anywhere either). I tried 5 different restore points, before and after that one, and they all failed. But the first time around, I had touch on the logon screen, just not after windows started. The next time, I had touch but not pen. The next time, I had touch and pen, but only for a period of time (I think HP Advisor may have been the intervening event) before they stopped working.
Oh, and HP advisor does not appear to be actually installing the things on the action list. That could be an issue with Comodo, but it really looks more like an issue with that "mother may I" message from Windows asking for permission to run the program. Often as not, windows reports that the program is not responding. Closing the program with that dialog box actually gives it the kick in the knickers it needs to complete.
A not so great workaround is to use the mobility center to orient the screen when you want to put the thing in slate mode. You can pin it to the task bar (with a little fiddling). Touch is extremely slow to respond in slate mode. For example, it took about 3 minutes to get the screen oriented back around to notebook config, which is 4 "clicks" if things are working right. Pen works sort of OK (although I haven't tried any writing) . Gestures for scrolling do not work.
I am done with the troubleshooting until someone comes up with other targeted ideas.I have been keeping detailed chrono notes.
Again, I hope the information here leads to a solution. This unit is not a functional tablet and I don't want to stay with Vista, neither should I have to since this is supposed to be compatible.

I saturated all the available iPad (3rd. generation) screen space (home screens or desktop space) with apps, and the apps that got bumped out of the last screen, mysteriously disappeared? Where are those missing quick lauch app icons?

Running my 3rd generation iPad on iOS 7.0.4, I saturated all the available iPad screen space (which would be the 15 home screens or desktop worth of space) with apps, and the apps that got bumped out of the last screen space mysteriously disappeared. Where are those missing quick lauch app icons now? The apps are still installed and can be searched/accessed through the finder, but they no longer have a user friendly access. How can I solve this problem?

Christopher Doryan wrote:
Hi Hexonxonx, thanks for trying to help, but next time please read the entire discussion, in oder to better comprehend what is being asked. The reason being is that your answer added nothing to what had already been mentioned.
Like I said, I was aware it was possible to access the apps through the finder, but the question revolved around how to recover the quick launch app icons for certain vanished apps.
Wow, kind of a snotty response to someone who was taking their own time to offer help. Whether you thought it was helpful or not, didn't deserve such an unkind retort. Maybe when you realize we all just users here trying to help others like you, who have issues and we don't get anything in return for the countless hours some people here spend offering that assistance, you'll maybe be a little less quick to be critical.
Just sayin.......
Oh and Meg offered the right answer. Put your Apps in Folders, which will create extra space for the apps which have disappeared.

Remove Quick Delete button in Outlook 2013?

I've asked this
here, but how do I remove the Quick Delete button in the Outlook view, but retain the Flag Status column?
They seem to share the same column.
Thanks.

I can't comment on touch but with a mouse the only option this leaves us is to turn off the flag status column and forces every one who uses flags to right click or remember key commands.
If there is always a delete X on the far right, I can live with that...
What's really a problem is that if you alter the view setting > column order and try to move flag status anywhere else that isn't 5 pixels away from the delete X it always stays on the far right and it ignores the column settings
that seems like a bug to me.
I mean being able to customize for ones needs/taste is one the many things that makes outlook awesome, why take that away?
not to mention this one should be pretty obvious as risky.
i.e. oh this message is important, let me flag it and get back to it, oh crap i deleted it, arrg i'm using imap email like gmail on my non work profile, hitting ctrl + z doesn't really undo a delete ...sure you can manually find in the trash, but I wouldn't
label that as a "awesome/helpful UI experience" more like, terrifying you for a few seconds UI. Even worse, if you are in hurry, you might not notice you've deleted it.

Missing Joing Kerberos Button...

Just in case this happens to you...
Binding Mac OS X Server 10.4.x to Active Directory or Open Directory
(for the purposes of joining an AD or OD Kerberos Realm)
If you go through the steps and get to the point where you've chosen "connected to a directory system" and you have no "join kerberos" button...
1. Demote to standalone, save, quit Server Admin
2. Remove, re-add LDAP or AD configurations in Directory Access.
3. Obviously make sure your DNS is set to that which is able to resolve the necessary servers, including the one you're on.
4. Set up Server (server admin) as connected-to (in the case of AD) or OD Master (in the case of OD, quickly follow this with "connected-to" once the change is complete).
5. Click "change" when prompted for changing the role. Do NOT click save.
6. Click Join kerberos. You should get your kerberos realm filled in the drop-down. Use your delegate admin (provided from the OD or AD KDC) to authenticate.
The computer will still have the join kerberos button available in the meantime. Don't click it. You should be joined. Check your /Library/Preferences/edu.mit.Kerberos file to examine your realms.
*If you now bind a client to your new service principle, you should be able to log-in, or request any other kerberized service. Examine your kerberos tickets using klist or /System/Library/CoreServices/Kerberos to make sure they are there.
And..when in doubt, use sso_util to join. The GUI just gets weirded out sometimes..have fun.

John,
As mentioned yestda, i deleted and re-installed the Element 8 on my computer. It went very smoothly, no problem whatsoever. Then i tried everything you mentioned in your emails. Nothing helped. The 'Advanced" option did not show up at all in the Preferences box, nor on the Downleader box. I can't think of anything else to try other than call the Tech support of Adobe, unless you or someone else can suggest something else to try. I am willing to try anything. Thanks a lot for everyone's help.
Regards, DukeF5
Date: Mon, 8 Feb 2010 11:47:39 -0700
From: [email protected]
To: [email protected]
Subject: missing Advanced Dialog button
Does "'Show APD Dialog (Advanced)" appear as an option in that drop-down list, as shown here:
http://forums.adobe.com/servlet/JiveServlet/showImage/19683/capture.png
If it doesn't, then that's an additional indication that your PSE is getting confused about the display height. (When the height is less than 768, PSE won't show the Advanced option in the drop-down box.) Whether that's a bug in PSE or a problem on your computer, who knows.
Did you try steps 2-4 from my previous message?
>

Pavilion DV7 Quick Launch Buttons Problem

Dear all,
I have a new laptop Pavilion DV7. It comes with Vista Home Premium.
After updated to Vista SP2, the sound volume bar pop up on the screen ramdomly ( abnormal stepping up or down with click sound) ( I am not sure have it happen before update? Since, I do not check it detail before )
It happens at irregular time. It annoys me so much. Because it is my new laptop which taken on last Firday (23/10) and find the problem on Saturaday(24/10).
I have contact with HP technical center. However, it just on holiday and re-open on the coming Tuesday.
I am so unhappy and no more to use right now.
Besides, there are also no respond when I touched another Quick launch buttons.
Anyone can help ?
Thanks
tlee

Hello all,
I would like to report my updated news.
Since, HP service center did not give me call until the second day after I left my DV7 there.
Therefore, I phone to them actively. One guy reply me that they accepted my new dv7 has hardware problem. They will arrange to replace a new one to me (since, my notebook is suffer problem within 7 days after purchased).
However, the guy has not replied me when I can take the new one. She just told me to wait.
I'm afraid HP guy told a lie again............. As for my previous post content about my experience ( pointing out wrong decision to choose HP product), HP people is not honest.
I think it is the HP mission right now : ( and the executives of HP seem to turn a blind eye.
Besides, I am still monitoring another threads of this HP forum. And find that the HP product tends to worse. It is not only hardware issue, but also the software driver issue.
And the interesting thing when I talked with HP technical center people. He already told me their drivers are no problem. He aways said it is Microsoft problem and want to misleading me go to contact Microsoft.
Alternative, you may find HP's competitor is willing to enhance their product compatibility with Microsoft Windows to become more reliable.
http://shop.lenovo.com/SEUILibrary/controller/e/na/LenovoPortal/en_US/special-offers.workflowhowProm...
PLEASE !!!, HP people who is looking this fourm. I beg yours kindly help to inform the relative HP top management to know that ours issues. And follow up our cases.
Thanks alot !

My Quick Play Buttons are frozen on dv 9823em Entertainment Notebook

Help!! The strip of finger sensitive Quick Play buttons along top of my keyboard aren't working so I can't watch dvds and I have no sound coming from computer. Don't know where to start?!

Hey there,
This document will walk you through the steps to resolve the issue with the quick launch buttons. If your stull having issues post back with any new details and we will go from there.
HP Quick Launch Buttons Do Not Work as Expected
Take care,
Sean
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

[HELP] I lost the quick search button on my 5800 h...

I tried to install a game into my phone and it make my phone not responding so long. I tried to turn off by pressing the power button but it wasn't respond. Then I take out the battery, put it in turn on my phone again. I found that the quick search button below the shortcut on my home screen has disapeared. I tried to restart the phone but the problem still there. When I go to setting->personal->home screen->home screen to check and it only show 4 line: Shortcuts, music player, radio, calendar. The quick search has completely disapeared. How to solve this? Thanks

That's the reason that i say to be carefull when you are going to install any application/game.Try to restore your phone's original settings.
Menu > Settings > Phone > Phone mgmt.> Factory Settings > Yes > Enter the security/lock code and OK.(the Nokia's default security/lock code is 12345)
Uninstall this application/game before do this!
If this post was useful, thank me by clicking the Kudos! button.
If you want to thank someone, just click on the blue star at the bottom of their post

Does Quick-Swipe comping work correctly for anybody?

I have searched these threads a bit and I guess there's no answer.
I'm trying to comp a grouped, multi-track drum recording. It's getting very frustrating because I need it to work so bad.
If anybody tells me that their Logic set-up can do this, let me know. Maybe I just need to re-install...

Quick swipe comping is of no value for normal audio production. If you want to hear different takes quickly or shift timing around it's useless. Hopefully the programming hours expended to develop this feature were minimal. It makes the conceptual focus of what the apple team is doing look misguided. Even what its intended to do can be accomplished much more efficiently by making multiple tracks and cutting and sliding. I have looked at it closely and it always results in many more mouse moves and less flexibility that just recording in replace record and piling up multiple tracks. I wish they would have spent the time making the program stable or making the group function actually work for automation.
ml

Missing quick swipe buttons on takes folders.

Similar Messages

Maybe you are looking for