Missing Recovery partition after restoring full TM backup

Hello everyone,
I have a question for you Time Machine gurus. I have looked at pondini.org but could not find the answer. It is very possible I have overlooked it.
Here is the scenario:
Macbook Pro with Lion 10.7.2. I connected 1TB USB drive. Formatted it.
Rebooted while holding Option+R. Had two options: Main Drive and Recovery HD. Took Main Drive.
Ran full TM machine backup to the external.
Rebooted while holding Option+R. Had three options: Main Drive, Recovery HD and TM Backup. Took TM Backup. It worked fine, everything looked good.
The next step may not make sense to you, but I have been having some performance issues with the MBP, so I decided to format the main drive and recover it from the TM backup so that the data would be contiguous. I have read countless articles in favor or against doing this. I just thought it made sense, based on many articles I read here.
I then, while running from the TM backup, formatted my main drive.
Next I did a full recovery of the main drive from the TM backup. Everything worked just fine and I am running ok at this time. Not sure it helped performance yet, but here is the question:
Once I reboot the system holding Option+R after the recovery, I only have two options: Main Drive and TM backup. Recovery HD is gone. So it seems that was either not backed up to TM to begin with or not recovered to the Main Drive during the full recovery. Any ideas? The goal was to have it still there in the Main Drive, although with a full TM backup I would not really need it unless I am away from my external, which could happen.
Thanks for ideas or suggestions.
M

Mr. Goob-Mart wrote:
Rebooted while holding Option+R. Had two options: Main Drive and Recovery HD. Took Main Drive.
You don't need to hold the R key. Option invokes the Startup Manager, which shows all bootable volumes.
Or, you can hold Cmd+R to start from the Recovery HD on your Mac.
Once I reboot the system holding Option+R after the recovery, I only have two options: Main Drive and TM backup. Recovery HD is gone.
That's correct. A full restore erases the entire OSX volume, including the Recovery HD. (Just why it takes the Recovery HD isn't clear, but it does).
The only way to get a new one is to download a fresh copy of Lion, via the Recovery HD on the TM drive.
Once it's there, you can copy it to another drive if you want. See: OS X Lion: About Lion Recovery Disk Assistant (but you can't copy the one on your Time Machine drive).

Similar Messages

How do I restore a missing recovery partition in Mountain Lion so I can activate Find My Mac?

I am missing my Recovery Partition on my MacBook Pro (Retina), so I cannot activate Find My Mac. How can I restore the missing recovery partition?

Gin Tonyx wrote:
Kessler, thx for your insight. That helped me.
[personal]
Csound: I read the terms. Section 3 of the submissions rules says "Post constructive […] questions. Unless otherwise noted, your Submission should […] be a technical support question […]."
I don't see where I went wrong. Maybe you could get off my back, please. Willya?
[/personal]
You should have kept reading until item 5
5. Test your answer. When possible, make sure your Submission works on your own computer before you post it.

How to recover the recovery partition after delete all hard disk partitions

hallo
how to recover the recovery partition after delete all hard disk partitions in toshiba satellite pro c850-1fn ?
note that : I did not work recovery disc or usb to my laptop.
I have need of your help.

Satellite Pro C850-1FN (PSCBXE-01700EEN)
Restore the hard disk to its original out-of-the-box contents using Toshiba recovery media. All of the original partitions will be restored, including the recovery partition.
If no recovery discs were created, you can obtain them from Toshiba.
Toshiba Europe Backup Media Online Shop
For instructions, see the section Restoring the pre-installed software from your created Recovery Media on p. 4-18 of the User's Manual (attached).
-Jerry

Recreate missing recovery partition

After wiping my computer via partitioning from a USB installer, and reinstalling from the USB, I noticed when I tried to boot that there is no recovery partition. Just OS X and Windows (bootcamp). Is there a proprietary built in Apple way to recreate the recovery partiton?

CCC Carbon Copy Cloner has a utility called "Disk Center" that is included with CCC that will create a Recovery Partition for you. I understand that CCC is not free, but it does have a free 30 day trial.
I did use the musings.silvertooth.us utility to create a missing recovery partition successfully, but found (1) it hard to find the right version on that site and (2) I was somewhat uncomfortable running a low-level AppleScript install program style utility built by an unknown source on the internet. Call my paranoid, but in the future I would prefer to either use CCC to avoid losing my recovery partition like I did with Super Duper (which I've loved for years until this missing recovery partition issue) or use CCC to create missing recovery partitions.
The "Disk Center" in CCC Carbon Copy Cloner is not obvious and easy to find... it's easy to not know it's there. But once you find it in the CCC menu system, it is seemingly obvious that it is a turnkey way to create a Recovery HD Partition.
I just thought I would share, since I burned several hours of pain-staking research and experimentation on this.

HT1751 After "Restoring iTunes Library Backup" it wont link to the files in the iTunes folder. I've followed the correct procedure, and iTunes lists all my music correctly (but with no artwork), but can't locate any of the files. Using Windows 7. Help ple

After "Restoring iTunes Library backup" it wont link to the files in the iTunes folder. I've followed the procedure as described, and the iTunes folder is in the correct location. iTunes lists all my music correctly (albeit with no artwork), but can't locate any of the files.
I've been restoring my iTunes folder from a backup hard drive to a new computer on which I've downloaded the latest iTunes (10.7). If this is a newer version than the one I backed up with could this be the problem? (I had the latest (to my knowledge) iTunes when I backed up the folder about 3 weeks ago, was this version 10.7?)
Or is the version of iTunes (within recent updates) not an issue when restoring a library?
Using Windows 7.
Any help please?

From the top of the page where the scripts live...
The general method of use is to download the script to a folder of your choice, e.g. your Desktop, Downloads folder or create a folder at ...\iTunes\Scripts. Select a playlist or highlight some tracks in iTunes and then double-click on the script to execute it. If no specific tracks are selected the script will try to work with all tracks in the current playlist. Some scripts offer a choice of track by track confirmation of changes or fully automatic processing of the selection. Many of the scripts can optionally display a progress bar while running.
You are strongly advised to backup your entire library, or at the very least the iTunes Library.itl file, before use. Test the behaviour of your chosen script on a small group of files first to make sure it does what you want before applying it to large numbers of files.
Most builds of Windows will execute *.vbs scripts when you double-click them. If that doesn't happen then you might need to visit the Add/Remove Programs or Programs & Features control panel to enable the Windows Scripting Host. I can track down details if you have issues.
Backing up and restoring data is an area that is often glossed over. Most people don't try to learn much about it until they've lost something important. (Me too )
If your iTunes library was in the usual layout then normally copying the whole iTunes folder from the User's Music folder in the old computer to the User's Music folder in the new one will usually work fine. Ideally this is done before iTunes is installed so that there is no empty library to replace, and all settings are picked up from the old library. This post contains more details.
tt2

Missing Disk Partition after Yosemite Install (invalid sector size)

Right off the install, my exFAT partition on my MBP is missing. Thought it was not mounted automatically so I went to Disk Utility to have a look.
It says "invalid sector size (0)" or something (I'll edit/update this post in a bit. I'm on Mac Recovery as I'm typing this) and it couldn't repair it.
Bootcamped into Windows and the same thing's happening (partition shows up but as an unformatted volume, proceeds to prompt to format partition)
I haven't thought to check to see if the OSX volume has expanded or not, so I'll do it after this.
Man I hope the files are still there. Is there a fix or way to manually edit the sector size?
Would reverting back to Mavericks be able to repair it?
Disk Details:
960GB Crucial M500 SSD
Partitioning Order:
NTFS (W7) 128GB | exFAT (stuff) 512GB | HFS (OSX) 256GB | freespace (not used) the rest
(Windows reports a more complicated partition map due to the Hybrid MBR partition map, but the main partition order is as above)
(As for why this order, it happens that I am unable to add an additional partition when I install OSX before Windows due to constraints of the MBR-type partitioning, but I am able to add one when Windows is installed before OSX as a workaround to save one partition count in the MBR)
Mac Details:
MBP 15" Mid-2012 Model A1286 4GB RAM
OSX 10.10 (Yosemite)
Windows 7 via Bootcamp

Hi putnik, thanks for the reply. I've tried the repair in Disk Utility from the recovery partition and it's unable to fix it as well.
The installer didn't have any prompts regarding File Vault (I never turned it on in the first place) beforehand.
It's my first time reading of Core Storage, so that may have bitten me on this end. The interesting property of the exFAT volume is Disk Utility recognises that as a Bootcamp volume (although no OS was installed in it and it doesn't appear in Bootcamp). (EDIT: it said that when I still had Mavericks but now it doesn't say anything even with the windows partition)
I'm still looking around for a fix or any way of reading it, and I'm holding off the last resort of reformatting it. Got a few days of work in it that I haven't backed up, although finding a fix could use the same amount of time as redoing it.
Here's the message by the way:
Verifying volume “disk0s3”Verifying file system.** /dev/rdisk0s3
Invalid sector size: 0
File system check exit code is 8.
Error: This disk needs to be repaired. Click Repair Disk.
Verify and Repair volume “disk0s3”Repairing file system.** /dev/rdisk0s3
Invalid sector size: 0
File system check exit code is 8.
Updating boot support partitions for the volume as required.
Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.

How to Restore Full Offiline Backup using BRTOOLS from a Tape

Dear all,
I want to recover PRD Full Offline Backup using BRTOOLS from a tape in a new machine.
I have Install SAP in the new machine.
Now I want to restore the PRD Full Offiline Backup taken through BRTOOLs in tape in the new machine.
1. I have shutdown the SAP.
2. I have shutdown the database Oracle 10g.
3. I have inserted the backup tape
4. Through user ORASID I have executed BRTOOLS
I got the following options: -
BRTools main menu
1 = Instance management
2 - Space management
3 - Segment management
4 - Backup and database copy
5 - Restore and recovery
6 - Check and verification
7 - Database statistics
8 - Additional functions
9 - Exit program
I selected Option 5 Restore and recovery
And got the Following Options
Restore and recovery
1 = Complete database recovery
2 - Database point-in-time recovery
3 - Tablespace point-in-time recovery
4 - Whole database reset
5 - Restore of individual backup files
6 - Restore and application of archivelog files
7 - Disaster recovery
8 - Reset program status
1. Now which option do I need to select and then what all other options do I need to select.
2. Whether the database should be a mount state or shutdown ?
Kindly help.

Dear Mark,
Thanks.
As suggested I tried both the options however face some difficulties please suggest
brrestore -u / -c -b <backup_log.ext> -p init<SID>.sap -m full
hinrnddev:oradev 1> brrestore -u / -c -b bedflluv.fft -p initDEV.sap -m full
BR0401I BRRESTORE 7.00 (32)
BR0405I Start of file restore: redhafeh.rsb 2010-05-22 11.55.55
BR0484I BRRESTORE log file: /oracle/DEV/sapbackup/redhafeh.rsb
BR0252E Function fopen() failed for '/oracle/DEV/sapbackup/bedflluv.fft' at location BrbLogRead-1
BR0253E errno 2: No such file or directory
BR0121E Processing of log file /oracle/DEV/sapbackup/bedflluv.fft failed
BR0406I End of file restore: redhafeh.rsb 2010-05-22 11.55.55
BR0280I BRRESTORE time stamp: 2010-05-22 11.55.55
BR0404I BRRESTORE terminated with errors
When I used the brrestore command I got the above error message.
Then I tried the next option Complete database recover
BRRECOVER options for restore and recovery
1 * Recovery type (type) ............. [complete]
2 - BRRECOVER profile (profile) ...... [initDEV.sap]
3 ~ BACKINT/Mount profile (parfile) .. []
4 - Database user/password (user) .... [/]
5 - Recovery interval (interval) ..... [30]
6 - Confirmation mode (confirm) ...... [yes]
7 - Scrolling line count (scroll) .... [20]
8 - Message language (language) ...... [E]
9 - BRRECOVER command line (command) . [-p initDEV.sap -t complete -i 30 -s 20 -l E]
Standard keys: c - cont, b - back, s - stop, r - refr, h - help
BR0662I Enter your choice:
C
Complete database recovery main menu
1 = Check the status of database files
2 * Select database backup
3 * Restore data files
4 * Restore and apply incremental backup
5 * Restore and apply archivelog files
6 * Open database and post-processing
7 * Exit program
8 - Reset program status
Standard keys: c - cont, b - back, s - stop, r - refr, h - help
BR0662I Enter your choice:
C
Complete database recovery main menu
1 + Check the status of database files
2 # Select database backup
3 # Restore data files
4 # Restore and apply incremental backup
5 # Restore and apply archivelog files
6 + Open database and post-processing
7 = Exit program
8 - Reset program status
Standard keys: c - cont, b - back, s - stop, r - refr, h - help
BR0662I Enter your choice:
the + sign got changed to +
and the * got changed to #
then it is getting in loop please suggest what do I do now.

How to install a recovery partition after installing a new Hard drive? and FileVault help.

Hi,
I recently swapped out hard drives and when I did a Time Machine backup to the new drive, I noticed there was no Recovery HD partition for my drive. Is there a way to install it back on my MacBook Pro (Late 2011, running 10.7.4)?
On a slighlty different topic FileVault won't let me encrypt my new HD it says "Some disk formats don’t support the recovery partition required by encryption. To use encryption, reinstall this version of Mac OS X on a reformatted disk."
What formatting does my disk require for FV to be turned on? Currently it is Mac OS Extended (journaled)
If there is a solution to solve both these issues, or any one issue it would be appreciated.

The formatting being referred to is actually the presence of the Recovery Disk.
You can't enable FV2 without a recovery partition being present. The reason is strictly logical: if your entire disk was encrypted, how could you run the unencryption procedure you need to start up? That would itself be hidden behind the encryption. Hence, for FV2 to be able to work, you must have a Recovery disk present.
When you boot up with FV2 enabled, the login screen you see to enter your password is actually running from the recovery disk (invisible to the user). After you enter your password, recovery boots your encrypted partition and logs you in to your account.

Missing Recovery Partition and Unrecognized File Systems

So, a long time ago I accidentally deleted my recovery partition and have recently been trying to fix it so that I can upgrade my OS to Mavericks. After browsing around here I found the Recovery Partition Creator 3.7 and used it to create a new recovery partition. Using the diskutil list command everything seemed to be fine and it looked like the partition was successfully created so I tried reinstalling OS X Lion by holding command R at startup. Doing so brought up the internet recovery menu and I selected reinstall Lion which was still unsuccessful because "a recovery partition could not be created". So, I decided to check in disk utility to see what might be wrong and I used the disk utility debug command in order to access disk utility's debug menu and show all the hidden partitions. Now, looking at these partitions I see two hidden partitions: disk0s1 which is an EFI partition, and disk0s3 which is the Apple Boot Partition that was created by Recovery Partition Creator 3.7. After verifying the partitions, disk utility is telling me that both my EFI and apple boot partitions have unrecognized file systems, my Macintosh HD partition is fine. At this point I do not know what to do.
Below are photos of the diskutil list and of what disk utility is showing me for the two hidden partitions.
For reference I am running OSX Lion 10.7.5 (11G63) on a early 2011 13 inch Macbook Pro (Base Model).
Bootrom version: MBP81.0047.B27
SMC Version: 1.68f99
Thank you all in advance for your help, feel free to ask me any questions.

Just an update, I went ahead and installed Lion again over the existing TM restored installation using the Lion Update file and at least File Vault is working. Interestingly, I still do not have a Recover partition so obviously something new for Apple Support to learn.

How do I create a recovery partition when restoring from Time Machine?

I am planning to replace the HDD in my Macbook Pro with an SSD. I've used Time Machine to backup my HDD (running Mountain Lion) but am trying to find the best way to restore my Time Machine backup to the new SSD once installed.
Given that the new SSD will not have a bootable OS X Recovery partition, I have created a bootable OS X Recovery drive on a USB thumb drive using OS X Recovery Assistant.
In order to ensure that the new SSD has the OS X Recovery parition, should I:
(1) reinstall Mountain Lion on the SSD then recover my data from Time Machine; or
(2) can I simply use the Restore from Time Machine option in OS X Recovery to do it all at once.
I can't seem to work out whether option (2) will create the OS X Recovery partition on the new SSD or just recover the system partition.

Turns out the OS X Recovery partition is only created on a fresh install of OS X. Restoring via Time Machine will not do the trick.

Need inputs on RMAN Backup n Recovery for multiple restore of clean backup

I will explain my scenario below:
We have the requirement of performance testing of our proposed production platform, for this i am asked to take RMAN backup of clean position (Say Day0 or baseline backup) and restore it multiple times for few rounds of testing. My question is after 1st restore (with set until time of day0 position) if i open the database with resetlogs, would i be able to restore same clean backup again? I am using control file in the environment instead of RMAN catalog database. What i can do to make this scenario work? I am already in preperation of setting rman catalog database.
Please suggest me the best way forward...
Many Thanks
Nukesh

Hi Asif,
I tried to make it work but seems there are still issue with my recovery, can you have a look and point out the shortcommings. i am totally lost here
RMAN> list incarnation;
using target database control file instead of recovery catalog
List of Database Incarnations
DB Key Inc Key DB Name DB ID STATUS Reset SCN Reset Time
1 1 MYTEST 2433328848 PARENT 1 19-DEC-06
2 2 MYTEST 2433328848 PARENT 564488 04-NOV-10
3 3 MYTEST 2433328848 CURRENT 693719 06-NOV-10
RMAN> exit
TEST1DB-> rman target sys@MYTEST1
Recovery Manager: Release 10.2.0.3.0 - Production on Sun Nov 7 11:43:01 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
target database Password:
connected to target database: MYTEST (DBID=2433328848, not open)
RMAN> reset database to incarnation 2;
using target database control file instead of recovery catalog
database reset to incarnation 2
RMAN> run {
2> restore database until scn 10000;
3> recover database until scn 10000;
4> alter database open resetlogs;
5> };
Starting restore at 07-NOV-10
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=191 instance=MYTEST1 devtype=DISK
allocated channel: ORA_DISK_2
channel ORA_DISK_2: sid=190 instance=MYTEST1 devtype=DISK
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 11/07/2010 11:45:18
RMAN-20208: UNTIL CHANGE is before RESETLOGS change
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00558: error encountered while parsing input commands
RMAN-01009: syntax error: found ";": expecting one of: "allocate, alter, backup, beginline, blockrecover, catalog, change, c onnect, copy, convert, create, crosscheck, configure, duplicate, debug, delete, drop, exit, endinline, flashback, host, {, l ibrary, list, mount, open, print, quit, recover, register, release, replace, report, renormalize, reset, restore, resync, rm an, run, rpctest, set, setlimit, sql, switch, spool, startup, shutdown, send, show, test, transport, upgrade, unregister, va lidate"
RMAN-01007: at line 0 column 2 file: standard input
RMAN>
RMAN> show all;
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO REDUNDANCY 1; # default
CONFIGURE BACKUP OPTIMIZATION OFF; # default
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/rmanbackup/MYTEST/ora_cf%F';
CONFIGURE DEVICE TYPE DISK PARALLELISM 2 BACKUP TYPE TO BACKUPSET;
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/rmanbackup/MYTEST/ora_df%t_s%s_s%p';
CONFIGURE MAXSETSIZE TO UNLIMITED; # default
CONFIGURE ENCRYPTION FOR DATABASE OFF; # default
CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/u01/app/oracle/product/10g/dbs/snapcf_MYTEST1.f'; # default
RMAN> exit
SQL> select name from v$database;
NAME
MYTEST
SQL> show parameter CONTROL_FILE_RECORD_KEEP_TIME
NAME TYPE VALUE
control_file_record_keep_time integer 7
SQL>

2007 2.6GHz 17 Inch Macbook Pro (MacBookPro3,1) Missing Recovery Partition?

My MacBook Pro 2007 2.6GHz 17 Inch is missing a recovery partition. I was told it is supposed to be added automatically when you reinstall/update your mac os x. I recently did a fresh install of Mavericks. It was missing. I did another fresh install, still missing. Then I restored data and did a non-fresh install. Still Missing. I kinda want to be able to track the computer. It has the original hard drive, and all the other components are original as well, except for the battery, which exploded, apple replaced it under warranty a while ago, and the RAM. I upgraded the RAM today, but it didn't work before either. It is genuine OWC RAM. (The same kind apple uses) Do I need to manually create one? Should I downgrade the OS and then upgrade to Mavericks again? Is it a problem that apple is going to fix?
I did make the mistake of erasing the entire hard drive rather than just the main partition. However, according to apple, this should not have made a difference, as if it is missing it is supposed to be created with the installation.
15 Inch, 2.6GHz, 2007 MacBook Pro (MacBookPro3,1) Running OS X 10.9.1 (Mavericks)

There are two versions of recovery: the regular which will download the currently installed system and internet recovery which will allow you to wipe a drive and reinstall the originally installed system (as long as that was Lion or later). Both of them require that the recovery partition be installed - that is what allows you to boot from it (with key commands) and that you have an internet connection.
Note the link towards the bottom to Internet Recovery which will result in this page (about Recovery):
http://support.apple.com/kb/HT4718

Rescue and Recovery 4.52 - Makes Full Image Backups?

So, this may seem like a simple question to some, but I can not find a conclusive answer yet.
I have Lenovo's Rescue and Recovery 4.52 - Windows 7 (64 bit) for my Lenovo T540. Will Rescue and Recovery 4.52 create a full image backup such that if in the event my hard drive crashes, I can reinstall the entire operating system, programs, etc at one time, without having to reinstall individual software programs?
I just don't want to install Rescue and Recovery 4.52 because it is a large program, without it being able to do a full image backup.
Thanks

In my personal opinion, Rescue and Recovery is obselete. For Win7 and later, my advice is to use Windows built-in backup and restore. You can create both a complete system image (what you are asking about), and also backup individual files/folders in your libraries.
http://windows.microsoft.com/en-us/windows7/products/features/backup-and-restore
Rescue and Recovery was great for XP and earlier OS when there wasn't any built-in backup and restore functions. But for Win7 and later, my advice is to use the OS built-in feature. Hope this helps.

Odd Partitions after Restore to Factory Condition, Why?

HP Compaq Presario CQ57, Windows 7 Home Premium SP-1 64 bit
A month ago I bought an HP Compaq Presario CQ57 notebook (laptop), which comes installed with 2 x 1GB RAM modules. It functioned fine. A couple of weeks ago, I upgraded the RAM by replacing one of the 1GB modules with a 4GB one.
When I restarted Windows, yes, it did blue screen momentarily, but recovered with another start and then things went well for a week.
Then, upon attempting to reboot, it failed. On the Windows Welcome screen, it flickers briefly before it fails and goes to a blue screen.
Using the HP Recovery Console, after trying a recovery that didn’t work, I tried the option of restoring to factory condition. Then, it still produced blue screens, giving error messages like IRQL less than equal and Page fault in non-page area.
I replaced the new RAM with the original 2 x 1GB RAM and tried a restore to factory condition option again. This time it worked. However, the hard drive partitions are odd.
Disc Management
http://imageshack.us/photo/my-images/163/dickman2.gif/
As you can see, Disk 0 is divided into
System 199 MB, C 75GB, not labled 133.34 GB, Recovery D 19.38, HP TOOLS E 3.97 GB.
Ignore the CD ROM below.
Isn’t System supposed to be on C? And the 133.34 GB unallocated space isn’t supposed to be there either.
I ran the restore to factory again and it produced the same disk partitioning. I consulted HP customer service, and they sent me a Windows disk and wants me to try restoring from that rather than from the Recovery provided on the hard drive. I haven’t done this yet, but is there an explanation? And actually, can’t I simply expand the C partition to the unallocated space to the right?
`~- Nehmo

Mumbodog wrote:
No "system" is the boot partition windows 7 installs by default, it is ok ...
In Disk Manager (see the pic above), the C partition has "boot" in parentheses after "Healthy". Customer Service claims it's tools from Microsoft, but I'm not satisfied that's correct. And it's only 199 MB.
So to be clear on my question, What is the rightmost partition, the one labeled "System" in the above pic? It appears the OS and boot are on C.
And how should Disk Manager look on a normal, successful restore?

Phone stuck in recovery even after restore :(

hi guys, i just bought an iphone 3g in italy for like.. 3 weeks now, i've already downloaded alot of programs from the app store so it was kinda slowing down a bit, and since im lazy to reorganize them, i ended up using the restore function from the itunes.. after that.. my phone went crazy and is currently stuck in the recovery mode thingy.. there's a picture of a cable and itunes... i tried using restore again but it doesnt work at all....
i havnt seen anything like this in this forum or over the site's i've visited... i hope u guys can help or atleast give me a clue on whats going on..
thanks guys...

Received excellent tech. support from Apple on this issue and after a full day of screwing around was able to get our Iphone up and working again without many of the aps and contacts that we have recently added. I'm an older guy and this reminds me of my early windows experience and not what I would expect from Apple. This is not a comment on the quality of the tech support but on the software glitches. Get it right guys or someone is on your heels who will!

Missing Recovery partition after restoring full TM backup

Similar Messages

Maybe you are looking for