Mitigating DRM creating packages from Steam games?
In the light of recent events (http://www.reddit.com/r/Steam/comments/ … irst_game/), do you think it will be wise to create AUR packages from Steam games? These packages could be rebuilt everytime we want, considering that games can be updated.
Before you said it, i know, this is our fault for accepting Steam with all its DRM crap included. That's why this is a mitigation, not a solution.
Thanks!
You have a naive undestanding of how steam and DRM works in general. (And possibly AUR, hard to tell)
If a binary is locked to steam and valve says you can no longer play this game then you cannot start it even if you have all the files.
In theory it could work in the so called "offline mode" for a while, but it will demand an internet connection sooner or later and then no game for you.
Steam is DRM and they made it clear you are not buying the games, you just buy a license to play. If you want to create backups that will work don't buy steam games, use DRM free shops like the Humble Store or GOG.
Similar Messages
-
ORA-12571 error while creating packages from Windows clients
Hello,
We are facing the ORA-12571 error while creating / replacing packages from Windows Clients connected to a 8.1.7.2.0 db on a Solaris server.
However, there are
1. no errors in connecting and creating transactions from a Sql session
2. no errors in creating / replacing unwrapped/wrapped small (few lines) packages
3. no errors in connecting from a Unix session (remote telnet sessions inclusive).
This happens only when creating wrapped/unwrapped packages, source code of which is greater than 500 kb approx.
Can somebody help me resolve this issue. Any Help would be greatly appreciated.
Regards.
Lakshmanan, KUpdate: I had unintentionally left my custom tablespace in READONLY state after an earlier experiment with transportable tablespaces. After putting the tablespace back into READ WRITE mode and creating a new template, I was successfully able to create a new db from the template.
I'm still a little curious why this procedure wouldn't work properly with a READONLY tablespace, however.
Ben -
Create packages from the SqlDeveloper 1.5 Extension API
How do you CREATE and EXECUTE packages and procedures from the SqlDeveloper 1.5 Extension API?
Not from the GUI... but from the Extension API.
Any kind of package, for example...
create or replace package MY_PKG is
procedure my_procedure (a number, b number) ;
end;
create or replace package body MY_PKG is
procedure my_procedure (a number, b number) is
begin
select 'x' from dual;
end ;
end;
And then EXECUTE a package from the API...
For example...
exec MY_PKG.my_procedure (1, 2)Just use ordinary JDBC:
Using the API, you can execute a query the following way:
oracle.dbtools.db.DBUtil dbutil = oracle.dbtools.db.DBUtil.getInstance();
dbutil.execute(oracleConnection, sql, binds);
// There are various overloads and/or similar methods such as the following:
String s = dbutil.executeReturnOneCol(oracleConnection, sql, binds);
// (binds is a java.util.HashMap<String, Object>)
It's interesting to note that you can turn on and off the notification of exceptions:
dbutil.setRaiseError(false); //off
dbutil.setRaiseError(true); //on
Because of these methods, I was half expecting similar methods for executing PL/SQL.
Apparently, there isn't any equivalent method for PL/SQL and you should just use ordinary JDBC instead. -
Create Package from /var/lib/pacman/local[SOLVED]
I am trying to get an old version of google earth bcz the 5.2 in aur doesn't start for me. I have it installed on another system but there is not package in /var/cache/pacman/pkg. Is it possible for me to create a package based on the info written by pacman in /var/lib/pacman/loca/google-earth-x.xx.?
Last edited by empthollow (2010-07-19 04:02:19)You need a PKGBUILD.
Edit:
Who would have thought that AUR packages write to /var/lib/pacman/local ? ;P
I stand corrected: you don't necessarily need a PKGBUILD, you can use bacman.
you can download the previous Google Earth binary from this link
http://dl.google.com/earth/client/advan … hLinux.bin
Last edited by karol (2010-07-19 03:59:29) -
Creating Packages from BLOB field contents, line wrap problems
Good afternoon,
we use an in-house developed database-driven update system to update both our databases and filesystems, the system itself performs really well but there is still one problem I can't fix without some expert help:
the code of to-be-updated Oracle packages is stored inside of a BLOB field, the BLOB field will contain both the package specification and package body and needs to be split into two parts to first execute the spec and then to execute the package body (I tried to execute both in a single step but this didn't work). This works for packages with less than 32767 characters and also works in some other cases but I found one case where the executed code contains an extra line wrap right in the middle of a word.
To make it more clear (I hope it's comprehensible), imagine the following database content:
CREATE OR REPLACE Package
MyPack
AS
[... a lot procedure headers ...]
END MyPack;
CREATE OR REPLACE
Package Body MyPack AS
[... a lot more procedures ...]
PROCEDURE myTest (intID OUT integer)
AS
BEGIN
SELECT count (*) into intID FROM MyTa[--this is where the dbms_lob.substr() ends --]ble;
END;
END MyPack;My code searches for the second occurrence of the "Create or replace package", splits the code into spec and body, executes the specification and keeps on adding the rest of the code to a VARCHAR2A variable called "storedCode" from the BLOB. Now in the above example, after the specification has been removed from the string, the remaining characters (ending with the "MyTa" string) are added to the varchar2a variable, the next line is fetched from the BLOB via "dbms_lob.substr()" and added as long as dbms_lob.substr() does not return a NULL value (end of BLOB). When the code is executed after all has been fetched, the generated Package Body will contain an extra line wrap right in the middle of the "MyTable" word compiling the package invalid.
This is the procedure code I use (definitely improvable, I'm better in MSSQL and MySQL dialects ...) to load, parse and execute the BLOB content:
-- to run package code
procedure runPackageCode (stepRef integer)
AS
numLines integer default 1;
pos integer default 1;
storedCode LOG_CHANGEDOBJECT.STOREDOBJECT%type;
objectCursor integer;
lSqlOut integer;
sqlCommand dbms_sql.varchar2a;
emptyCommand dbms_sql.varchar2a;
pIsError integer := 0;
pErrorMsg varchar2(200) := '';
updateRef integer := 0;
currentUpdate integer := 0;
schemaReference varchar2(20);
-- required to do string cutting
strLine varchar2(32767);
strLeftFromSlash varchar2(32767);
strRemaining varchar2(32767);
intDelimiterPos integer := 0;
begin
-- retrieve update ID
SELECT log_update_ref INTO currentUpdate FROM link_update_with_taskstep WHERE log_taskstep_ref = stepRef;
begin
select storedobject, change_area
into storedCode, schemaReference
from vw_storedobjects
where step_id = stepRef;
exception
when no_data_found then
pIsError := 1;
pErrorMsg := 'Invalid SQL ID ' || stepRef;
pkg_generic.LogError(updateRef, 'LocalUpdater', stepRef, 'Run package code failed: ' || pErrorMsg);
end;
if pIsError = 0 then
begin
-- change schema
execute immediate 'alter session set current_schema = ' || schemaReference;
objectCursor := dbms_sql.open_cursor;
loop
strLine := UTL_RAW.CAST_TO_VARCHAR2(dbms_lob.substr(storedCode, 32767, pos));
intDelimiterPos := regexp_instr(strLine, '\s*Create\s*or\s*Replace\s*Package', 2, 1, 0, 'i');
while intDelimiterPos > 0
loop
-- '/' found, execute currently stored statement
strLeftFromSlash := substr(strLine, 1, intDelimiterPos-1);
strLine := substr(strLine, intDelimiterPos);
-- execute the extracted part without any '/' in it
sqlCommand(numLines) := regexp_replace(strLeftFromSlash, '(^|\s+)/(\s+|$)', '', 1, 0, 'm');
if (sqlCommand(numLines) is not null) then
objectCursor := dbms_sql.open_cursor;
dbms_sql.parse(objectCursor, sqlCommand, 1, numLines, true, dbms_sql.native);
lSqlOut := dbms_sql.execute(objectCursor);
dbms_sql.close_cursor(objectCursor);
end if;
-- reset sqlCommand
sqlCommand := emptyCommand;
-- reset line counter and store remaining string
numLines := 1;
-- check for further '/'s
intDelimiterPos := regexp_instr(strLine, '\s*Create\s*or\s*Replace\s*Package', 2, 1, 0, 'i');
end loop;
-- add the remaining strLine to the sqlCommand
strLine := regexp_replace(strLine, '(^|\s+)/(\s+|$)', '', 1, 0, 'm');
--> I assume this line breaks the code, lpad()'ing the content to move it to the end of a varchar2a line didn't help
sqlCommand(numLines) := strLine;
exit when sqlCommand(numLines) is null;
pos := pos+32767;
numLines := numLines+1;
end loop;
objectCursor := dbms_sql.open_cursor;
dbms_sql.parse(objectCursor, sqlCommand, 1, numLines, true, dbms_sql.native);
lSqlOut := dbms_sql.execute(objectCursor);
dbms_sql.close_cursor(objectCursor);
commit;
-- reset schema
execute immediate 'alter session set current_schema = UPDATE_DB';
-- set state to installed
pkg_update.setstepstate(stepRef, 'Installed');
exception
when others then
-- reset schema
execute immediate 'alter session set current_schema = UPDATE_DB';
-- set state to installFailed
pkg_update.setstepstate(stepRef, 'InstallFailed');
pkg_generic.LogError(updateRef, 'Database', stepRef, 'Run package code failed: ' || sqlerrm);
end;
end if;
END; Thanks if you kept on reading so far, I would really appreciate any feedback!
Regards, SaschaWelcome to the forum!
Whenever you post provide your 4 digit Oracle version (result of SELECT * FROM V$VERSION).
Thanks for providing an easy-to-understand problem statement and for using code tags.
>
the code of to-be-updated Oracle packages is stored inside of a BLOB field
>
This should be stored in a CLOB since it is character data. Why are you using BLOB?
>
the BLOB field will contain both the package specification and package body and needs to be split into two parts to first execute the spec and then to execute the package body
>
Good, clear problem statement. So why doesn't your code do just what you said it should do: 1) split the code into two parts, 2) execute the spec and 3) execute the body.
Instead of writing code that does these three relatively simple steps your code tries to combine splitting and executing and mushes/mashes it all together. The result, as you found, is code that is hard to understand, hard to debug, doesn't work and doesn't report on what it is doing.
Code like this doesn't have a performance issue so the code should implement the simple step-by-step process that you so elegantly stated in your problem description:
1. split the code into two parts
2. execute the spec
3. execute the body
My advice is to refactor your code to perform the above steps in the proper order and to add proper exception handling and reporting for each step. Then when a step isn't working you will know exactly where and what the problem is.
Here are my recommendations.
1. Add two CLOB variables - one will hold the spec, the second will hold the body
2. Add a comment (you have some good ones in the code now) for every step no matter how trivial it may be
3. Add exception/error handling to EVERY STEP
Your code for the first step has a comment but no exception handling. What should happen if you don't get any data? Why aren't you validating the data you get? Dynamic SQL using table-driven data is great, I love it, but you MUST validate that the data you get is what you expect to get.
-- retrieve update ID
SELECT log_update_ref INTO currentUpdate FROM link_update_with_taskstep WHERE log_taskstep_ref = stepRef;Recommended
-- step 1 - retrieve update ID - This is the id that determines BLAH, BLAH, BLAH - add appropriate to tell a new developer what this ID is and what it means.
BEGIN
SELECT log_update_ref INTO currentUpdate FROM link_update_with_taskstep WHERE log_taskstep_ref = stepRef;
EXCEPTION
WHEN ??? THEN -- what should happen if step 1 fails? Do it here - don't default to an exception handler that is several pages away.
END;Your code
begin
select storedobject, change_area
into storedCode, schemaReference
from vw_storedobjects
where step_id = stepRef;
exception
when no_data_found then
pIsError := 1;
pErrorMsg := 'Invalid SQL ID ' || stepRef;
pkg_generic.LogError(updateRef, 'LocalUpdater', stepRef, 'Run package code failed: ' || pErrorMsg);
end;
Good - except there is no comment that says what this does - I assume that the query above and this block are the 'retrieve update ID ' step?
You log an error message and set the error flag to '1'. But since you don't want to continue why aren't you exiting the procedure and returning right here?
if pIsError = 0 then
beginSo now you check the error flag and do several pages of code if there were no errors.
I don't like that 'inverted' logic.
If you don't want to continue then STOP right now! Don't make a developer scan through pages and pages of code to find out you really aren't doing anything else if there was an error.
Either put a RETURN statement in the exception handler above or change your code to
if pIsError = 1 then
RETURN;
end if;Now the rest of the code doesn' t have to be indented; you will never get there if there is an error. Check for errors after every step and exit right then as appropriate.
-- change schema
execute immediate 'alter session set current_schema = ' || schemaReference;
objectCursor := dbms_sql.open_cursor;
loop
strLine := UTL_RAW.CAST_TO_VARCHAR2(dbms_lob.substr(storedCode, 32767, pos));
intDelimiterPos := regexp_instr(strLine, '\s*Create\s*or\s*Replace\s*Package', 2, 1, 0, 'i');
while intDelimiterPos > 0
loopThis code mixes all of the steps together into one giant mess. You open a cursor, try to split the BLOB into spec and body and try to parse and execute both all within a double nested loop.
Even if that works correctly another developer will have a hard time understanding what the code is doing and fixing it if it goes wrong. And it will go wrong if you let me test if for you because I will put garbage into the BLOB for the spec, body or both to make sure it breaks and to see how your code handles it.
I suggest you rewrite this double nested loop to perform the three steps separately.
1. split the code into two parts
a. put the spec into one new CLOB variable and the body into the other.
b. use DBMS_OUTPUT (or a work table) to output the spec and body so you can see what the code is and make sure the 'split' process worked properly. You probably created that BLOB by manually concatenating the SPEC and BODY to begin with so now create a SPLIT process to split them again and give them back to you. This is such a fundamental component that I suggest creating a new SPLIT_MY_BLOB procedure. This procedure would take a BLOB and return two CLOBS as OUT parameters: one CLOB is the spec and one is the body. Then you can reuse this 'split' procedure in other code or more complex versions of code. Modular programming is the key.
2. execute the spec - Now have a step that executes the spec and does something appropriate if the step succeeds or if it fails. I mean, do you really want to do execute the body if the spec execution fails? What do you want to do? Should you delete the body and spec? If you don't you might wind up with an INVALID body based on old code and an INVALID spec based on the new code you were trying to use. How will anyone, including you, know that the spec and body in the ALL_SOURCE view is really two different versions of things?
This suggests that for your use case you may want to consider DROPPING the entire package, spec and body, before trying to recreate them both. At least if the package is totally missing anyone will know that the entire thing needs to be put back. Ahhhh - but to do that you need to know the package name so you can drop it. Than may require adding another step to get the package name from your data-driven table and adding a DROP PACKAGE step.
3. execute the body - This step executes the body. Hmmmm - we have two nearly identical steps. So why don't you create a new function/procedure that takes a CLOB as input, uses dynamic sql to execute it and returns a result code. That would be useful. Then you could execute ANY sql stored in a CLOB and have a generic function that you can use for other things.
Right now you are using the VARCHAR2 table version of DBMS_SQL.PARSE but you would change this to use the CLOB version.
The end result of this refactoring is a main function/procedure that acts as the CONTROL - it decides what to do and what data (BLOB) to do it with. But it doesn't actually do ANY of the work. It just controls what is done.
And you have a couple of generic, reuseable functions that actually do the work. One knows how to split a CLOB into spec and body. The other knows how to use dynamic SQL to execute a CLOB.
Now you have a modular architecture that is easy to understand, easy to code and easy to test. -
Problem with oracle packages CREATE PACKAGE some packagename in MaxDB
Hi All,
I am having Problems in Creating Packages from MaxDB ..Does MaxDB supports the CREATE PACKAGE <some packagename>concept ? if so please help me how to achieve in creating packages ..
My sample Oracle package Creation is as follows:
CREATE OR REPLACE PACKAGE BODY acs
AS
FUNCTION add_user (
user_id IN users.user_id%TYPE DEFAULT NULL,
object_type IN acs_objects.object_type%TYPE DEFAULT 'user',
creation_date IN acs_objects.creation_date%TYPE DEFAULT sysdate,
creation_user IN acs_objects.creation_user%TYPE DEFAULT NULL,
creation_ip IN acs_objects.creation_ip%TYPE DEFAULT NULL,
) RETURN users.user_id%TYPE
IS
v_user_id users.user_id%TYPE;
v_rel_id membership_rels.rel_id%TYPE;
BEGIN
v_user_id := acs_user.new (user_id, object_type, creation_date,
creation_user, creation_ip, email, ...
RETURN v_user_id;
END;
END acs;
show errors Can you Please Explain me how to write the same Package in MaxDB?
Thanks & Regards,
Shanmukh
Edited by: shanmukh babu on May 16, 2008 10:11 AMHi Shanmukh,
MaxDB does not have packages like you'll find them in Oracle.
But you can define your own functions and procedures.
From the code-example you posted, I would say that a procedure will do it ...
I suggest that you first read the documentation on procedures [CREATE DBPROC Statement|http://maxdb.sap.com/doc/7_6/a7/41ee11605911d3a98800a0c9449261/frameset.htm]
There you'll also find an example in the Tutorial section.
Be aware that the procedural capabilities of MaxDB are far less enlarged as in Oracle - but they do exist and work in their realm.
So porting a full PL/SQL application layer to MaxDB procedures may turn out to be quite difficult and/or not the best choice at all.
KR Lars -
I know this may sound a little strange, and you'll be wondering... "Why don't you just use makepkg?
Well, I don't actually use Arch Linux, and have always used FreeBSD, but I was interested in pacman , which I decided to port and run on FreeBSD, all is well, but now I'm stuck at creating packages from within the ports.
The idea was to make a script, which would build the port, then package up the binary files that are in 'work/$portname-$portversion' and create packages that would be compatible with pacman .
I was wondering if anyone knew the steps to manually create packages from a compiled source, so then I can implement it into a working script to use with my port tree.
Any help would be greatly appreciated.
[amzo@Bahamut ~]$ uname -a ; pacman -V
FreeBSD Bahamut 9.0-RELEASE FreeBSD 9.0-RELEASE #0: Tue Jan 3 07:15:25 UTC 2012 [email protected]:/usr/obj/usr/src/sys/GENERIC i386
.--. Pacman v4.0.3 - libalpm v7.0.3The reason I won't use Makepkg, is because the PKGBUILDS, won't build under FreeBSD. I've kinda made a working script to make packages, but it's no where near advance as makepkg is.
Well, it seems to be working fine for now, but doesn't handle dependencies well.
#!/bin/bash
me=`basename $0`
myver='1.0'
startdir=`pwd`
pkgname=`grep PORTNAME= Makefile | awk '{print $2}'`
pkgver=`grep PORTVERSION= Makefile | awk '{print $2}'`
[ -f /etc/makepkg.conf ] && . /etc/makepkg.conf
strip_url() {
echo $1 | sed 's|^.*://.*/||g'
if [ ! -f $startdir/Makefile ]; then
echo "error: Are you in the port directory?"
exit
fi
# Make pkg dir
mkdir -p pkg
# build
echo "==> Building Package..."
make PREFIX=$startdir/pkg install
# write the .PKGINFO file
echo "==> Generating .PKGINFO file..."
cd $startdir/pkg
echo "# Generated by makepkg $myver" >.PKGINFO
echo -n "# " >>.PKGINFO
date >>.PKGINFO
echo "pkgname = $pkgname" >>.PKGINFO
echo "pkgver = $pkgver" >>.PKGINFO
# remove info files
cd $startdir
rm -rf pkg/usr/info pkg/usr/share/info
# strip binaries
cd $startdir
echo "==> Stripping debugging symbols from libraries..."
find pkg/{,usr,usr/local}/lib -type f \
-exec /usr/bin/strip --strip-debug '{}' ';'
echo "==> Stripping symbols from binaries..."
find pkg/{,usr,usr/local}/{bin,sbin} -type f \
-exec /usr/bin/strip '{}' ';'
# tar it up
echo "==> Compressing package..."
cd $startdir/pkg
tar czvf $startdir/$pkgname-$pkgver.pkg.tar.gz .PKGINFO *
cd $startdir
echo "==> Finished";
And the packages play fine with pacman. Wooo
[amzo@Bahamut /usr/ports/x11-wm/dwm]$ sudo pacman -U dwm-6.0.pkg.tar.gz
loading packages...
resolving dependencies...
looking for inter-conflicts...
Targets (1): dwm-6.0
Proceed with installation? [Y/n] y
(1/1) checking package integrity [#############################################################################] 100%
(1/1) loading package files [#############################################################################] 100%
(1/1) checking for file conflicts [#############################################################################] 100%
(1/1) checking available disk space [#############################################################################] 100%
(1/1) installing dwm [#############################################################################] 100%
The only problem that this brings to the field, is that it doesn't play nice with the database:
error: invalid name for database entry 'dwm-6.0'
Maybe someone could help me here a bit, someone who's more experienced with creating packages?
Last edited by Amzo2 (2012-06-03 13:42:07) -
I have to install only Adobe presenter from this whole application. I created package using AAMEE3.1
I created package using AAMEE 3.1, using source of Adobe E-learning Suite 6.1 .
During Package creation i selcted only Adobe Presenter 8. Package is serialized and also Adobe ID is there to login. Package created sucessfully. But when i run MSI it rollbacks during Installation.
Below is the PDApp.log file:
7/15/2013 09:07:21 [INFO] DeploymentManager - Build Version - 3.1.105.0
7/15/2013 09:07:21 [INFO] DeploymentManager - Logging Level verbosity Set to 4
7/15/2013 09:07:21 [INFO] DeploymentManager - Executing the deferred custom action.
7/15/2013 09:07:21 [INFO] DeploymentManager - Obtained the following as CustomActionData
7/15/2013 09:07:21 [INFO] DeploymentManager - mode=install;sourceDir=C:\New folder (2)\Adobe Presenter 8\Build\;installDir=;origDB=C:\New folder (2)\Adobe Presenter 8\Build\Adobe Presenter 8.msi
7/15/2013 09:07:21 [INFO] DeploymentManager - mode=install;sourceDir=C:\New folder (2)\Adobe Presenter 8\Build\;installDir=;origDB=C:\New folder (2)\Adobe Presenter 8\Build\Adobe Presenter 8.msi
7/15/2013 09:07:21 [INFO] DeploymentManager - Original database path is : C:\New folder (2)\Adobe Presenter 8\Build\Adobe Presenter 8.msi
7/15/2013 09:07:21 [INFO] DeploymentManager - OptionXML saved at location :: D:\Users\Vmbuild\AppData\Local\Temp\{0EAD2103-39AF-4D85-B942-CAC0E462C482}\\{9CB14C72-1E7 1-49C0-A7D8-559F1DC35661}
7/15/2013 09:07:21 [INFO] DeploymentManager - Build Version - 3.1.105.0
7/15/2013 09:07:21 [INFO] DeploymentManager - Logging Level verbosity Set to 4
7/15/2013 09:07:21 [INFO] DeploymentManager - Initializing Custom Action Data from parameters
7/15/2013 09:07:21 [INFO] Utilities - Folder does not exist
7/15/2013 09:07:21 [INFO] DeploymentManager - Provisioning Tool path is (D:\Users\Vmbuild\AppData\Local\Temp\{0EAD2103-39AF-4D85-B942-CAC0E462C482}\\{731F139B-D8 D6-4870-AA90-9626C4D6D4E2}).
7/15/2013 09:07:21 [INFO] DeploymentManager - Starting to run the custom action for install mode
7/15/2013 09:07:21 [INFO] DeploymentManager - STEP 1: Starting to parse Option XML.
7/15/2013 09:07:21 [INFO] DeploymentManager - Deployment XML created at path :: D:\Users\Vmbuild\AppData\Local\Temp\{2592DDC9-72BD-430A-B2EA-C2839B69B46E}\\{709B4BF9-4A0 5-4D3E-BC48-850DE16D5A85}
7/15/2013 09:07:21 [INFO] DeploymentManager - Deployment Manager is running in Install Mode.
7/15/2013 09:07:21 [INFO] DeploymentManager - Self-Update BootStrapper Relative Path doesn't exist.
7/15/2013 09:07:21 [INFO] DeploymentManager - Override XML created at path :: D:\Users\Vmbuild\AppData\Local\Temp\{2592DDC9-72BD-430A-B2EA-C2839B69B46E}\\{61E5FBB2-8F4 C-4909-9A3F-823EC1DE99F5}
7/15/2013 09:07:21 [INFO] DeploymentManager - No of updates found (0).
7/15/2013 09:07:21 [INFO] DeploymentManager - STEP 2: Starting to launch media Bootstrapper.
7/15/2013 09:07:21 [INFO] DeploymentManager - Bootstrapper launch location is :: C:\New folder (2)\Adobe Presenter 8\Build\Setup\Set-up.dat
7/15/2013 09:07:22 [INFO] Setup - Build Version - 6.2.136.0
7/15/2013 09:07:22 [INFO] Setup - Logging Level verbosity Set to 4
7/15/2013 09:07:22 [INFO] Setup - Start Adobe Setup
7/15/2013 09:07:22 [INFO] Setup - TimeLog: Bootstrapper Start
7/15/2013 09:07:22 [INFO] Setup - TimeLog: Start initial checks
7/15/2013 09:07:22 [INFO] Setup - Action specified - "install"
7/15/2013 09:07:22 [ERROR] Setup - Error parsing command line arguments at - "DISABLE_CCM_DESKTOPSHORTCUT".
Expected arguments are -
--mode=silent
--overrideFile="<FilePath>"
7/15/2013 09:07:22 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\Setup\resources\setup.xml
7/15/2013 09:07:22 [INFO] PIM - XML is valid
7/15/2013 09:07:22 [WARN] PIM - Failed to find Node
7/15/2013 09:07:22 [INFO] Setup - Found 7 packages in setup manifest
7/15/2013 09:07:23 [INFO] Utilities - Semaphore is not locked
7/15/2013 09:07:23 [INFO] PIM - Build Version - 6.2.136.0
7/15/2013 09:07:23 [INFO] PIM - Logging Level verbosity Set to 4
7/15/2013 09:07:23 [INFO] Utilities - File does not exist
7/15/2013 09:07:23 [INFO] Utilities - File does not exist
7/15/2013 09:07:23 [INFO] PIM - Build Version - 6.2.136.0
7/15/2013 09:07:23 [INFO] PIM - Logging Level verbosity Set to 4
7/15/2013 09:07:23 [INFO] PIM - CREATE PIM Instance ...
7/15/2013 09:07:23 [INFO] Utilities - File does not exist
7/15/2013 09:07:23 [INFO] PIM - trying to createOrUpdatePIMDbSchema.
7/15/2013 09:07:23 [INFO] PIM - Current db schema version on machine 1.
7/15/2013 09:07:23 [INFO] PIM - Current db schema version to install 1.
7/15/2013 09:07:23 [INFO] PIM - PIM DB Schema is up to date. Current schema version is 1.
7/15/2013 09:07:23 [INFO] PIM - PIM Database is Up To Date.
7/15/2013 09:07:23 [INFO] PIM - Updater Inventory location:C:\New folder (2)\Adobe Presenter 8\Build\Setup\resources\updaterinventory.dll
7/15/2013 09:07:23 [INFO] PIM - Acquired System level ACF lock ...
7/15/2013 09:07:23 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\core\PDApp.pimx
7/15/2013 09:07:23 [INFO] PIM - XML is valid
7/15/2013 09:07:23 [WARN] PIM - Failed to find Node
7/15/2013 09:07:23 [INFO] PIM - Package id 5AA1D762-31AF-4FC3-A0C0-66BF663B2117 is already installed
7/15/2013 09:07:24 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\D6\D6.pimx
7/15/2013 09:07:24 [INFO] PIM - XML is valid
7/15/2013 09:07:24 [WARN] PIM - Failed to find Node
7/15/2013 09:07:24 [INFO] PIM - Package id 54FD72DC-72EC-4CDC-8828-F07C4E9E6FA2 is already installed
7/15/2013 09:07:24 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\DECore\DECore.pimx
7/15/2013 09:07:24 [INFO] PIM - XML is valid
7/15/2013 09:07:24 [WARN] PIM - Failed to find Node
7/15/2013 09:07:24 [INFO] PIM - Package id 6D2A548B-C50D-46BA-B83E-C8199C6A9406 is already installed
7/15/2013 09:07:24 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\DWA\DWA.pimx
7/15/2013 09:07:24 [INFO] PIM - XML is valid
7/15/2013 09:07:24 [WARN] PIM - Failed to find Node
7/15/2013 09:07:24 [INFO] PIM - Package id 99477136-88AD-496B-9551-BAE72699A32C is already installed
7/15/2013 09:07:25 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\P6\P6.pimx
7/15/2013 09:07:25 [INFO] PIM - XML is valid
7/15/2013 09:07:25 [WARN] PIM - Failed to find Node
7/15/2013 09:07:25 [INFO] PIM - Package id FAFC744B-DDFB-4097-A41D-7E9539FEBAF9 is already installed
7/15/2013 09:07:27 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\LWA\LWA.pimx
7/15/2013 09:07:27 [INFO] PIM - XML is valid
7/15/2013 09:07:27 [WARN] PIM - Failed to find Node
7/15/2013 09:07:27 [INFO] PIM - Package id B322281B-C04F-438E-82D7-7DA34A359526 is already installed
7/15/2013 09:07:28 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\UWA\UWA.pimx
7/15/2013 09:07:29 [INFO] PIM - XML is valid
7/15/2013 09:07:29 [WARN] PIM - Failed to find Node
7/15/2013 09:07:29 [INFO] PIM - Package id B1313DE3-08DF-4834-91D9-CBD1A91488E5 is already installed
7/15/2013 09:07:29 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\CCM\CCM.pimx
7/15/2013 09:07:29 [INFO] PIM - XML is valid
7/15/2013 09:07:29 [WARN] PIM - Failed to find Node
7/15/2013 09:07:29 [INFO] PIM - Package id F0158AAB-0779-4B40-A07D-3F2A21D47E74 is already installed
7/15/2013 09:07:29 [INFO] PIM - pim_haveEnoughDiskSpaceToInstallPackages reqSize ... 29928536
7/15/2013 09:07:29 [INFO] Setup - TimeLog: End initial checks
7/15/2013 09:07:29 [INFO] Setup - TimeLog: Begin Installing
7/15/2013 09:07:29 [INFO] Setup - Start Installing core package - C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\core\PDApp.pimx
7/15/2013 09:07:29 [INFO] PIM - START installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\core\PDApp.pimx
7/15/2013 09:07:29 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\core\PDApp.pimx
7/15/2013 09:07:29 [INFO] PIM - XML is valid
7/15/2013 09:07:29 [WARN] PIM - Failed to find Node
7/15/2013 09:07:29 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\core\PDApp.pimx'
7/15/2013 09:07:29 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\core\PDApp.pima'
7/15/2013 09:07:29 [INFO] PIM - Package id 5AA1D762-31AF-4FC3-A0C0-66BF663B2117 is already installed
7/15/2013 09:07:29 [INFO] PIM - SUCCESS deleteAppletRegInfoRecords.
7/15/2013 09:07:31 [INFO] PIM - SUCCESS deletePackageUpgradeInfoRecords.
7/15/2013 09:07:31 [INFO] PIM - SUCCESS deletePackageInstallationInfoRecords.
7/15/2013 09:07:32 [INFO] PIM - SUCCESS insertPackageUpdateList.
7/15/2013 09:07:32 [WARN] PIM - Failed to find Node
7/15/2013 09:07:32 [INFO] PIM - SUCCESS insertAppletRegInfoList.
7/15/2013 09:07:32 [INFO] PIM - Backup Folder Created
7/15/2013 09:07:34 [INFO] Utilities - File does not exist
7/15/2013 09:07:37 [INFO] PIM - SUCCESS installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\core\PDApp.pimx.
7/15/2013 09:07:38 [INFO] Setup - Finished Installing core package - C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\core\PDApp.pimx, Return status: 0
7/15/2013 09:07:38 [INFO] Setup - Start Installing package - C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\D6\D6.pimx
7/15/2013 09:07:38 [INFO] PIM - START installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\D6\D6.pimx
7/15/2013 09:07:38 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\D6\D6.pimx
7/15/2013 09:07:38 [INFO] PIM - XML is valid
7/15/2013 09:07:38 [WARN] PIM - Failed to find Node
7/15/2013 09:07:38 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\D6\D6.pimx'
7/15/2013 09:07:38 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\D6\D6.pima'
7/15/2013 09:07:38 [INFO] PIM - Package id 54FD72DC-72EC-4CDC-8828-F07C4E9E6FA2 is already installed
7/15/2013 09:07:39 [INFO] PIM - SUCCESS deleteAppletRegInfoRecords.
7/15/2013 09:07:39 [INFO] PIM - SUCCESS deletePackageUpgradeInfoRecords.
7/15/2013 09:07:39 [INFO] PIM - SUCCESS deletePackageInstallationInfoRecords.
7/15/2013 09:07:39 [INFO] PIM - SUCCESS insertPackageUpdateList.
7/15/2013 09:07:39 [INFO] PIM - SUCCESS insertAppletRegInfoList.
7/15/2013 09:07:39 [INFO] PIM - Backup Folder Created
7/15/2013 09:07:39 [INFO] Utilities - File does not exist
7/15/2013 09:07:42 [INFO] PIM - SUCCESS installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\D6\D6.pimx.
7/15/2013 09:07:42 [INFO] Setup - Finished Installing package - C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\D6\D6.pimx
7/15/2013 09:07:42 [INFO] Setup - Start Installing package - C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\DECore\DECore.pimx
7/15/2013 09:07:42 [INFO] PIM - START installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\DECore\DECore.pimx
7/15/2013 09:07:42 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\DECore\DECore.pimx
7/15/2013 09:07:42 [INFO] PIM - XML is valid
7/15/2013 09:07:42 [WARN] PIM - Failed to find Node
7/15/2013 09:07:42 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\DECore\DECore.pimx'
7/15/2013 09:07:42 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\DECore\DECore.pima'
7/15/2013 09:07:42 [INFO] PIM - Package id 6D2A548B-C50D-46BA-B83E-C8199C6A9406 is already installed
7/15/2013 09:07:42 [INFO] PIM - SUCCESS deleteAppletRegInfoRecords.
7/15/2013 09:07:43 [INFO] PIM - SUCCESS deletePackageUpgradeInfoRecords.
7/15/2013 09:07:43 [INFO] PIM - SUCCESS deletePackageInstallationInfoRecords.
7/15/2013 09:07:43 [INFO] PIM - SUCCESS insertPackageUpdateList.
7/15/2013 09:07:43 [WARN] PIM - Failed to find Node
7/15/2013 09:07:43 [INFO] PIM - SUCCESS insertAppletRegInfoList.
7/15/2013 09:07:43 [INFO] PIM - Backup Folder Created
7/15/2013 09:07:45 [INFO] Utilities - File does not exist
7/15/2013 09:07:47 [INFO] PIM - SUCCESS installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\DECore\DECore.pimx.
7/15/2013 09:07:48 [INFO] Setup - Finished Installing package - C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\DECore\DECore.pimx
7/15/2013 09:07:48 [INFO] Setup - Start Installing package - C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\DWA\DWA.pimx
7/15/2013 09:07:48 [INFO] PIM - START installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\DWA\DWA.pimx
7/15/2013 09:07:48 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\DWA\DWA.pimx
7/15/2013 09:07:48 [INFO] PIM - XML is valid
7/15/2013 09:07:48 [WARN] PIM - Failed to find Node
7/15/2013 09:07:48 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\DWA\DWA.pimx'
7/15/2013 09:07:48 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\DWA\DWA.pima'
7/15/2013 09:07:48 [INFO] PIM - Package id 99477136-88AD-496B-9551-BAE72699A32C is already installed
7/15/2013 09:07:48 [INFO] PIM - SUCCESS deleteAppletRegInfoRecords.
7/15/2013 09:07:48 [INFO] PIM - SUCCESS deletePackageUpgradeInfoRecords.
7/15/2013 09:07:48 [INFO] PIM - SUCCESS deletePackageInstallationInfoRecords.
7/15/2013 09:07:48 [INFO] PIM - SUCCESS insertPackageUpdateList.
7/15/2013 09:07:48 [INFO] PIM - SUCCESS insertAppletRegInfoList.
7/15/2013 09:07:48 [INFO] PIM - Backup Folder Created
7/15/2013 09:07:49 [INFO] Utilities - File does not exist
7/15/2013 09:07:53 [INFO] PIM - SUCCESS installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\DWA\DWA.pimx.
7/15/2013 09:07:53 [INFO] Setup - Finished Installing package - C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\DWA\DWA.pimx
7/15/2013 09:07:53 [INFO] Setup - Start Installing package - C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\P6\P6.pimx
7/15/2013 09:07:53 [INFO] PIM - START installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\P6\P6.pimx
7/15/2013 09:07:53 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\P6\P6.pimx
7/15/2013 09:07:53 [INFO] PIM - XML is valid
7/15/2013 09:07:53 [WARN] PIM - Failed to find Node
7/15/2013 09:07:53 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\P6\P6.pimx'
7/15/2013 09:07:53 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\P6\P6.pima'
7/15/2013 09:07:53 [INFO] PIM - Package id FAFC744B-DDFB-4097-A41D-7E9539FEBAF9 is already installed
7/15/2013 09:07:53 [INFO] PIM - SUCCESS deleteAppletRegInfoRecords.
7/15/2013 09:07:54 [INFO] PIM - SUCCESS deletePackageUpgradeInfoRecords.
7/15/2013 09:07:54 [INFO] PIM - SUCCESS deletePackageInstallationInfoRecords.
7/15/2013 09:07:54 [INFO] PIM - SUCCESS insertPackageUpdateList.
7/15/2013 09:07:54 [INFO] PIM - SUCCESS insertAppletRegInfoList.
7/15/2013 09:07:54 [INFO] PIM - Backup Folder Created
7/15/2013 09:07:59 [INFO] Utilities - File does not exist
7/15/2013 09:08:04 [INFO] PIM - SUCCESS installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\P6\P6.pimx.
7/15/2013 09:08:04 [INFO] Setup - Finished Installing package - C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\P6\P6.pimx
7/15/2013 09:08:04 [INFO] Setup - Start Installing package - C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\LWA\LWA.pimx
7/15/2013 09:08:04 [INFO] PIM - START installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\LWA\LWA.pimx
7/15/2013 09:08:04 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\LWA\LWA.pimx
7/15/2013 09:08:04 [INFO] PIM - XML is valid
7/15/2013 09:08:04 [WARN] PIM - Failed to find Node
7/15/2013 09:08:04 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\LWA\LWA.pimx'
7/15/2013 09:08:04 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\LWA\LWA.pima'
7/15/2013 09:08:04 [INFO] PIM - Package id B322281B-C04F-438E-82D7-7DA34A359526 is already installed
7/15/2013 09:08:04 [INFO] PIM - SUCCESS deleteAppletRegInfoRecords.
7/15/2013 09:08:05 [INFO] PIM - SUCCESS deletePackageUpgradeInfoRecords.
7/15/2013 09:08:05 [INFO] PIM - SUCCESS deletePackageInstallationInfoRecords.
7/15/2013 09:08:05 [INFO] PIM - SUCCESS insertPackageUpdateList.
7/15/2013 09:08:05 [INFO] PIM - SUCCESS insertAppletRegInfoList.
7/15/2013 09:08:05 [INFO] PIM - Backup Folder Created
7/15/2013 09:08:09 [INFO] Utilities - File does not exist
7/15/2013 09:08:18 [INFO] PIM - SUCCESS installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\LWA\LWA.pimx.
7/15/2013 09:08:18 [INFO] Setup - Finished Installing package - C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\LWA\LWA.pimx
7/15/2013 09:08:18 [INFO] Setup - Start Installing package - C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\UWA\UWA.pimx
7/15/2013 09:08:18 [INFO] PIM - START installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\UWA\UWA.pimx
7/15/2013 09:08:18 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\UWA\UWA.pimx
7/15/2013 09:08:18 [INFO] PIM - XML is valid
7/15/2013 09:08:18 [WARN] PIM - Failed to find Node
7/15/2013 09:08:18 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\UWA\UWA.pimx'
7/15/2013 09:08:19 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\UWA\UWA.pima'
7/15/2013 09:08:19 [INFO] PIM - Package id B1313DE3-08DF-4834-91D9-CBD1A91488E5 is already installed
7/15/2013 09:08:19 [INFO] PIM - SUCCESS deleteAppletRegInfoRecords.
7/15/2013 09:08:20 [INFO] PIM - SUCCESS deletePackageUpgradeInfoRecords.
7/15/2013 09:08:20 [INFO] PIM - SUCCESS deletePackageInstallationInfoRecords.
7/15/2013 09:08:20 [INFO] PIM - SUCCESS insertPackageUpdateList.
7/15/2013 09:08:20 [INFO] PIM - SUCCESS insertAppletRegInfoList.
7/15/2013 09:08:20 [INFO] PIM - Backup Folder Created
7/15/2013 09:08:21 [INFO] Utilities - File does not exist
7/15/2013 09:08:27 [INFO] PIM - SUCCESS installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\UWA\UWA.pimx.
7/15/2013 09:08:27 [INFO] Setup - Finished Installing package - C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\UWA\UWA.pimx
7/15/2013 09:08:27 [INFO] Setup - Start Installing package - C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\CCM\CCM.pimx
7/15/2013 09:08:27 [INFO] PIM - START installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\CCM\CCM.pimx
7/15/2013 09:08:27 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\CCM\CCM.pimx
7/15/2013 09:08:27 [INFO] PIM - XML is valid
7/15/2013 09:08:27 [WARN] PIM - Failed to find Node
7/15/2013 09:08:27 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\CCM\CCM.pimx'
7/15/2013 09:08:27 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\CCM\CCM.pima'
7/15/2013 09:08:28 [INFO] PIM - Package id F0158AAB-0779-4B40-A07D-3F2A21D47E74 is already installed
7/15/2013 09:08:28 [INFO] PIM - SUCCESS deleteAppletRegInfoRecords.
7/15/2013 09:08:28 [INFO] PIM - SUCCESS deletePackageUpgradeInfoRecords.
7/15/2013 09:08:28 [INFO] PIM - SUCCESS deletePackageInstallationInfoRecords.
7/15/2013 09:08:29 [INFO] PIM - SUCCESS insertPackageUpdateList.
7/15/2013 09:08:29 [INFO] PIM - SUCCESS insertAppletRegInfoList.
7/15/2013 09:08:29 [INFO] PIM - Backup Folder Created
7/15/2013 09:08:29 [INFO] Utilities - File does not exist
7/15/2013 09:08:33 [INFO] Utilities - Path to Process :C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\\CCM\Utilities\AdobeCreativeCloudClient.exe Process Directory :C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\\CCM\Utilities arguments being passed :"C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\\CCM\Utilities\AdobeCreativeCloudClient.exe" --register=true --createShortcut=true
7/15/2013 09:08:33 [INFO] Utilities - Success in CreateProcess
7/15/2013 09:08:35 [INFO] Utilities - Sucessfully launched and executed process...
7/15/2013 09:08:35 [INFO] PIM - Successfully executed install modifier at path: 'C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\\CCM\Utilities\AdobeCreativeCloudClient.exe'
7/15/2013 09:08:35 [INFO] PIM - SUCCESS installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\CCM\CCM.pimx.
7/15/2013 09:08:35 [INFO] Setup - Finished Installing package - C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\CCM\CCM.pimx
7/15/2013 09:08:35 [INFO] PIM - Processing ... _pimCreateOrUpdateAAMInventory
7/15/2013 09:08:36 [INFO] PIM - Inventory Already present on the machine...
7/15/2013 09:08:36 [INFO] Setup - TimeLog: End Installing. Now launching PDApp
7/15/2013 09:08:37 [INFO] Setup - Deployment File Path not specified in command line arguments. Skipping payload deployment part
7/15/2013 09:08:37 [INFO] Setup - ================= End Adobe Setup. Exit code: 0 =================
7/15/2013 09:08:37 [INFO] PIM - PIMSqlite closeDB status 0
7/15/2013 09:08:37 [INFO] PIM - FREE PIM Instance ...
7/15/2013 09:08:37 [INFO] DeploymentManager - Build Version - 3.1.105.0
7/15/2013 09:08:37 [INFO] DeploymentManager - Logging Level verbosity Set to 4
7/15/2013 09:08:37 [INFO] DeploymentManager - The return code from the Bootstrapper Process is (0).
7/15/2013 09:08:37 [INFO] DeploymentManager - STEP 3: Starting to launch ASU AAM.
7/15/2013 09:08:37 [INFO] DeploymentManager - Bootstrapper launch location is :: C:\New folder (2)\Adobe Presenter 8\Build\ASU\Set-up.dat
7/15/2013 09:08:37 [INFO] Setup - Build Version - 6.2.136.0
7/15/2013 09:08:37 [INFO] Setup - Logging Level verbosity Set to 4
7/15/2013 09:08:37 [INFO] Setup - Start Adobe Setup
7/15/2013 09:08:37 [INFO] Setup - TimeLog: Bootstrapper Start
7/15/2013 09:08:37 [INFO] Setup - TimeLog: Start initial checks
7/15/2013 09:08:37 [INFO] Setup - Action specified - "install"
7/15/2013 09:08:37 [ERROR] Setup - Error parsing command line arguments at - "DISABLE_CCM_DESKTOPSHORTCUT".
Expected arguments are -
--mode=silent
--overrideFile="<FilePath>"
7/15/2013 09:08:37 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\ASU\resources\setup.xml
7/15/2013 09:08:37 [INFO] PIM - XML is valid
7/15/2013 09:08:37 [WARN] PIM - Failed to find Node
7/15/2013 09:08:37 [INFO] Setup - Found 7 packages in setup manifest
7/15/2013 09:08:37 [INFO] Utilities - Semaphore is not locked
7/15/2013 09:08:37 [INFO] PIM - Build Version - 6.2.136.0
7/15/2013 09:08:37 [INFO] PIM - Logging Level verbosity Set to 4
7/15/2013 09:08:37 [INFO] Utilities - File does not exist
7/15/2013 09:08:37 [INFO] Utilities - File does not exist
7/15/2013 09:08:37 [INFO] PIM - Build Version - 6.2.136.0
7/15/2013 09:08:37 [INFO] PIM - Logging Level verbosity Set to 4
7/15/2013 09:08:37 [INFO] PIM - CREATE PIM Instance ...
7/15/2013 09:08:37 [INFO] Utilities - File does not exist
7/15/2013 09:08:38 [INFO] PIM - trying to createOrUpdatePIMDbSchema.
7/15/2013 09:08:38 [INFO] PIM - Current db schema version on machine 1.
7/15/2013 09:08:38 [INFO] PIM - Current db schema version to install 1.
7/15/2013 09:08:38 [INFO] PIM - PIM DB Schema is up to date. Current schema version is 1.
7/15/2013 09:08:38 [INFO] PIM - PIM Database is Up To Date.
7/15/2013 09:08:38 [INFO] PIM - Updater Inventory location:C:\New folder (2)\Adobe Presenter 8\Build\ASU\resources\updaterinventory.dll
7/15/2013 09:08:38 [INFO] PIM - Acquired System level ACF lock ...
7/15/2013 09:08:38 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\core\PDApp.pimx
7/15/2013 09:08:38 [INFO] PIM - XML is valid
7/15/2013 09:08:38 [WARN] PIM - Failed to find Node
7/15/2013 09:08:38 [INFO] PIM - Package id 5AA1D762-31AF-4FC3-A0C0-66BF663B2117 is already installed
7/15/2013 09:08:38 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\D6\D6.pimx
7/15/2013 09:08:38 [INFO] PIM - XML is valid
7/15/2013 09:08:38 [WARN] PIM - Failed to find Node
7/15/2013 09:08:38 [INFO] PIM - Package id 54FD72DC-72EC-4CDC-8828-F07C4E9E6FA2 is already installed
7/15/2013 09:08:38 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\DECore\DECore.pimx
7/15/2013 09:08:38 [INFO] PIM - XML is valid
7/15/2013 09:08:38 [WARN] PIM - Failed to find Node
7/15/2013 09:08:38 [INFO] PIM - Package id 6D2A548B-C50D-46BA-B83E-C8199C6A9406 is already installed
7/15/2013 09:08:38 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\DWA\DWA.pimx
7/15/2013 09:08:38 [INFO] PIM - XML is valid
7/15/2013 09:08:38 [WARN] PIM - Failed to find Node
7/15/2013 09:08:38 [INFO] PIM - Package id 99477136-88AD-496B-9551-BAE72699A32C is already installed
7/15/2013 09:08:38 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\P6\P6.pimx
7/15/2013 09:08:39 [INFO] PIM - XML is valid
7/15/2013 09:08:39 [WARN] PIM - Failed to find Node
7/15/2013 09:08:39 [INFO] PIM - Package id FAFC744B-DDFB-4097-A41D-7E9539FEBAF9 is already installed
7/15/2013 09:08:39 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\LWA\LWA.pimx
7/15/2013 09:08:39 [INFO] PIM - XML is valid
7/15/2013 09:08:39 [WARN] PIM - Failed to find Node
7/15/2013 09:08:39 [INFO] PIM - Package id B322281B-C04F-438E-82D7-7DA34A359526 is already installed
7/15/2013 09:08:39 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\UWA\UWA.pimx
7/15/2013 09:08:39 [INFO] PIM - XML is valid
7/15/2013 09:08:39 [WARN] PIM - Failed to find Node
7/15/2013 09:08:39 [INFO] PIM - Package id B1313DE3-08DF-4834-91D9-CBD1A91488E5 is already installed
7/15/2013 09:08:39 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\CCM\CCM.pimx
7/15/2013 09:08:39 [INFO] PIM - XML is valid
7/15/2013 09:08:39 [WARN] PIM - Failed to find Node
7/15/2013 09:08:39 [INFO] PIM - Package id F0158AAB-0779-4B40-A07D-3F2A21D47E74 is already installed
7/15/2013 09:08:39 [INFO] PIM - pim_haveEnoughDiskSpaceToInstallPackages reqSize ... 29928536
7/15/2013 09:08:39 [INFO] Setup - TimeLog: End initial checks
7/15/2013 09:08:39 [INFO] Setup - TimeLog: Begin Installing
7/15/2013 09:08:39 [INFO] Setup - Start Installing core package - C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\core\PDApp.pimx
7/15/2013 09:08:39 [INFO] PIM - START installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\core\PDApp.pimx
7/15/2013 09:08:39 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\core\PDApp.pimx
7/15/2013 09:08:39 [INFO] PIM - XML is valid
7/15/2013 09:08:39 [WARN] PIM - Failed to find Node
7/15/2013 09:08:39 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\core\PDApp.pimx'
7/15/2013 09:08:39 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\core\PDApp.pima'
7/15/2013 09:08:39 [INFO] PIM - Package id 5AA1D762-31AF-4FC3-A0C0-66BF663B2117 is already installed
7/15/2013 09:08:39 [INFO] PIM - SUCCESS deleteAppletRegInfoRecords.
7/15/2013 09:08:39 [INFO] PIM - SUCCESS deletePackageUpgradeInfoRecords.
7/15/2013 09:08:39 [INFO] PIM - SUCCESS deletePackageInstallationInfoRecords.
7/15/2013 09:08:39 [INFO] PIM - SUCCESS insertPackageUpdateList.
7/15/2013 09:08:39 [WARN] PIM - Failed to find Node
7/15/2013 09:08:39 [INFO] PIM - SUCCESS insertAppletRegInfoList.
7/15/2013 09:08:40 [INFO] PIM - Backup Folder Created
7/15/2013 09:08:41 [INFO] Utilities - File does not exist
7/15/2013 09:08:45 [INFO] PIM - SUCCESS installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\core\PDApp.pimx.
7/15/2013 09:08:45 [INFO] Setup - Finished Installing core package - C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\core\PDApp.pimx, Return status: 0
7/15/2013 09:08:45 [INFO] Setup - Start Installing package - C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\D6\D6.pimx
7/15/2013 09:08:45 [INFO] PIM - START installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\D6\D6.pimx
7/15/2013 09:08:45 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\D6\D6.pimx
7/15/2013 09:08:45 [INFO] PIM - XML is valid
7/15/2013 09:08:45 [WARN] PIM - Failed to find Node
7/15/2013 09:08:45 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\D6\D6.pimx'
7/15/2013 09:08:45 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\D6\D6.pima'
7/15/2013 09:08:45 [INFO] PIM - Package id 54FD72DC-72EC-4CDC-8828-F07C4E9E6FA2 is already installed
7/15/2013 09:08:45 [INFO] PIM - SUCCESS deleteAppletRegInfoRecords.
7/15/2013 09:08:45 [INFO] PIM - SUCCESS deletePackageUpgradeInfoRecords.
7/15/2013 09:08:45 [INFO] PIM - SUCCESS deletePackageInstallationInfoRecords.
7/15/2013 09:08:45 [INFO] PIM - SUCCESS insertPackageUpdateList.
7/15/2013 09:08:45 [INFO] PIM - SUCCESS insertAppletRegInfoList.
7/15/2013 09:08:45 [INFO] PIM - Backup Folder Created
7/15/2013 09:08:46 [INFO] Utilities - File does not exist
7/15/2013 09:08:49 [INFO] PIM - SUCCESS installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\D6\D6.pimx.
7/15/2013 09:08:49 [INFO] Setup - Finished Installing package - C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\D6\D6.pimx
7/15/2013 09:08:49 [INFO] Setup - Start Installing package - C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\DECore\DECore.pimx
7/15/2013 09:08:49 [INFO] PIM - START installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\DECore\DECore.pimx
7/15/2013 09:08:49 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\DECore\DECore.pimx
7/15/2013 09:08:49 [INFO] PIM - XML is valid
7/15/2013 09:08:49 [WARN] PIM - Failed to find Node
7/15/2013 09:08:49 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\DECore\DECore.pimx'
7/15/2013 09:08:49 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\DECore\DECore.pima'
7/15/2013 09:08:49 [INFO] PIM - Package id 6D2A548B-C50D-46BA-B83E-C8199C6A9406 is already installed
7/15/2013 09:08:49 [INFO] PIM - SUCCESS deleteAppletRegInfoRecords.
7/15/2013 09:08:49 [INFO] PIM - SUCCESS deletePackageUpgradeInfoRecords.
7/15/2013 09:08:49 [INFO] PIM - SUCCESS deletePackageInstallationInfoRecords.
7/15/2013 09:08:49 [INFO] PIM - SUCCESS insertPackageUpdateList.
7/15/2013 09:08:49 [WARN] PIM - Failed to find Node
7/15/2013 09:08:49 [INFO] PIM - SUCCESS insertAppletRegInfoList.
7/15/2013 09:08:49 [INFO] PIM - Backup Folder Created
7/15/2013 09:08:51 [INFO] Utilities - File does not exist
7/15/2013 09:08:53 [INFO] PIM - SUCCESS installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\DECore\DECore.pimx.
7/15/2013 09:08:53 [INFO] Setup - Finished Installing package - C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\DECore\DECore.pimx
7/15/2013 09:08:53 [INFO] Setup - Start Installing package - C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\DWA\DWA.pimx
7/15/2013 09:08:53 [INFO] PIM - START installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\DWA\DWA.pimx
7/15/2013 09:08:53 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\DWA\DWA.pimx
7/15/2013 09:08:53 [INFO] PIM - XML is valid
7/15/2013 09:08:53 [WARN] PIM - Failed to find Node
7/15/2013 09:08:53 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\DWA\DWA.pimx'
7/15/2013 09:08:53 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\DWA\DWA.pima'
7/15/2013 09:08:55 [INFO] PIM - Package id 99477136-88AD-496B-9551-BAE72699A32C is already installed
7/15/2013 09:08:55 [INFO] PIM - SUCCESS deleteAppletRegInfoRecords.
7/15/2013 09:08:55 [INFO] PIM - SUCCESS deletePackageUpgradeInfoRecords.
7/15/2013 09:08:55 [INFO] PIM - SUCCESS deletePackageInstallationInfoRecords.
7/15/2013 09:08:55 [INFO] PIM - SUCCESS insertPackageUpdateList.
7/15/2013 09:08:55 [INFO] PIM - SUCCESS insertAppletRegInfoList.
7/15/2013 09:08:55 [INFO] PIM - Backup Folder Created
7/15/2013 09:08:55 [INFO] Utilities - File does not exist
7/15/2013 09:08:58 [INFO] PIM - SUCCESS installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\DWA\DWA.pimx.
7/15/2013 09:08:58 [INFO] Setup - Finished Installing package - C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\DWA\DWA.pimx
7/15/2013 09:08:58 [INFO] Setup - Start Installing package - C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\P6\P6.pimx
7/15/2013 09:08:58 [INFO] PIM - START installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\P6\P6.pimx
7/15/2013 09:08:58 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\P6\P6.pimx
7/15/2013 09:08:58 [INFO] PIM - XML is valid
7/15/2013 09:08:58 [WARN] PIM - Failed to find Node
7/15/2013 09:08:58 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\P6\P6.pimx'
7/15/2013 09:08:58 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\P6\P6.pima'
7/15/2013 09:08:59 [INFO] PIM - Package id FAFC744B-DDFB-4097-A41D-7E9539FEBAF9 is already installed
7/15/2013 09:08:59 [INFO] PIM - SUCCESS deleteAppletRegInfoRecords.
7/15/2013 09:08:59 [INFO] PIM - SUCCESS deletePackageUpgradeInfoRecords.
7/15/2013 09:08:59 [INFO] PIM - SUCCESS deletePackageInstallationInfoRecords.
7/15/2013 09:08:59 [INFO] PIM - SUCCESS insertPackageUpdateList.
7/15/2013 09:08:59 [INFO] PIM - SUCCESS insertAppletRegInfoList.
7/15/2013 09:08:59 [INFO] PIM - Backup Folder Created
7/15/2013 09:09:03 [INFO] Utilities - File does not exist
7/15/2013 09:09:11 [INFO] PIM - SUCCESS installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\P6\P6.pimx.
7/15/2013 09:09:11 [INFO] Setup - Finished Installing package - C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\P6\P6.pimx
7/15/2013 09:09:11 [INFO] Setup - Start Installing package - C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\LWA\LWA.pimx
7/15/2013 09:09:11 [INFO] PIM - START installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\LWA\LWA.pimx
7/15/2013 09:09:11 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\LWA\LWA.pimx
7/15/2013 09:09:11 [INFO] PIM - XML is valid
7/15/2013 09:09:11 [WARN] PIM - Failed to find Node
7/15/2013 09:09:11 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\LWA\LWA.pimx'
7/15/2013 09:09:11 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\LWA\LWA.pima'
7/15/2013 09:09:11 [INFO] PIM - Package id B322281B-C04F-438E-82D7-7DA34A359526 is already installed
7/15/2013 09:09:11 [INFO] PIM - SUCCESS deleteAppletRegInfoRecords.
7/15/2013 09:09:11 [INFO] PIM - SUCCESS deletePackageUpgradeInfoRecords.
7/15/2013 09:09:11 [INFO] PIM - SUCCESS deletePackageInstallationInfoRecords.
7/15/2013 09:09:12 [INFO] PIM - SUCCESS insertPackageUpdateList.
7/15/2013 09:09:12 [INFO] PIM - SUCCESS insertAppletRegInfoList.
7/15/2013 09:09:12 [INFO] PIM - Backup Folder Created
7/15/2013 09:09:15 [INFO] Utilities - File does not exist
7/15/2013 09:09:23 [INFO] PIM - SUCCESS installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\LWA\LWA.pimx.
7/15/2013 09:09:23 [INFO] Setup - Finished Installing package - C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\LWA\LWA.pimx
7/15/2013 09:09:23 [INFO] Setup - Start Installing package - C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\UWA\UWA.pimx
7/15/2013 09:09:23 [INFO] PIM - START installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\UWA\UWA.pimx
7/15/2013 09:09:23 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\UWA\UWA.pimx
7/15/2013 09:09:23 [INFO] PIM - XML is valid
7/15/2013 09:09:23 [WARN] PIM - Failed to find Node
7/15/2013 09:09:23 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\UWA\UWA.pimx'
7/15/2013 09:09:23 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\UWA\UWA.pima'
7/15/2013 09:09:24 [INFO] PIM - Package id B1313DE3-08DF-4834-91D9-CBD1A91488E5 is already installed
7/15/2013 09:09:24 [INFO] PIM - SUCCESS deleteAppletRegInfoRecords.
7/15/2013 09:09:24 [INFO] PIM - SUCCESS deletePackageUpgradeInfoRecords.
7/15/2013 09:09:24 [INFO] PIM - SUCCESS deletePackageInstallationInfoRecords.
7/15/2013 09:09:24 [INFO] PIM - SUCCESS insertPackageUpdateList.
7/15/2013 09:09:24 [INFO] PIM - SUCCESS insertAppletRegInfoList.
7/15/2013 09:09:24 [INFO] PIM - Backup Folder Created
7/15/2013 09:09:25 [INFO] Utilities - File does not exist
7/15/2013 09:09:31 [INFO] PIM - SUCCESS installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\UWA\UWA.pimx.
7/15/2013 09:09:32 [INFO] Setup - Finished Installing package - C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\UWA\UWA.pimx
7/15/2013 09:09:32 [INFO] Setup - Start Installing package - C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\CCM\CCM.pimx
7/15/2013 09:09:32 [INFO] PIM - START installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\CCM\CCM.pimx
7/15/2013 09:09:32 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\CCM\CCM.pimx
7/15/2013 09:09:32 [INFO] PIM - XML is valid
7/15/2013 09:09:32 [WARN] PIM - Failed to find Node
7/15/2013 09:09:32 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\CCM\CCM.pimx'
7/15/2013 09:09:32 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\CCM\CCM.pima'
7/15/2013 09:09:32 [INFO] PIM - Package id F0158AAB-0779-4B40-A07D-3F2A21D47E74 is already installed
7/15/2013 09:09:32 [INFO] PIM - SUCCESS deleteAppletRegInfoRecords.
7/15/2013 09:09:33 [INFO] PIM - SUCCESS deletePackageUpgradeInfoRecords.
7/15/2013 09:09:33 [INFO] PIM - SUCCESS deletePackageInstallationInfoRecords.
7/15/2013 09:09:33 [INFO] PIM - SUCCESS insertPackageUpdateList.
7/15/2013 09:09:33 [INFO] PIM - SUCCESS insertAppletRegInfoList.
7/15/2013 09:09:33 [INFO] PIM - Backup Folder Created
7/15/2013 09:09:33 [INFO] Utilities - File does not exist
7/15/2013 09:09:35 [INFO] Utilities - Path to Process :C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\\CCM\Utilities\AdobeCreativeCloudClient.exe Process Directory :C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\\CCM\Utilities arguments being passed :"C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\\CCM\Utilities\AdobeCreativeCloudClient.exe" --register=true --createShortcut=true
7/15/2013 09:09:36 [INFO] Utilities - Success in CreateProcess
7/15/2013 09:09:37 [INFO] Utilities - Sucessfully launched and executed process...
7/15/2013 09:09:37 [INFO] PIM - Successfully executed install modifier at path: 'C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\\CCM\Utilities\AdobeCreativeCloudClient.exe'
7/15/2013 09:09:37 [INFO] PIM - SUCCESS installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\CCM\CCM.pimx.
7/15/2013 09:09:37 [INFO] Setup - Finished Installing package - C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\CCM\CCM.pimx
7/15/2013 09:09:37 [INFO] PIM - Processing ... _pimCreateOrUpdateAAMInventory
7/15/2013 09:09:37 [INFO] PIM - Inventory Already present on the machine...
7/15/2013 09:09:37 [INFO] Setup - TimeLog: End Installing. Now launching PDApp
7/15/2013 09:09:37 [INFO] Setup - Deployment File Path not specified in command line arguments. Skipping payload deployment part
7/15/2013 09:09:37 [INFO] Setup - ================= End Adobe Setup. Exit code: 0 =================
7/15/2013 09:09:37 [INFO] PIM - PIMSqlite closeDB status 0
7/15/2013 09:09:37 [INFO] PIM - FREE PIM Instance ...
7/15/2013 09:09:37 [INFO] DeploymentManager - Build Version - 3.1.105.0
7/15/2013 09:09:37 [INFO] DeploymentManager - Logging Level verbosity Set to 4
7/15/2013 09:09:37 [INFO] DeploymentManager - The return code from the Bootstrapper Process is (0).
7/15/2013 09:09:37 [INFO] DeploymentManager - Correcting Dependencies in local db.
7/15/2013 09:09:37 [INFO] DeploymentManager - No media db present on the machine.
7/15/2013 09:09:37 [INFO] DeploymentManager - STEP 4: Starting to launch Adobe Installer.
7/15/2013 09:09:37 [INFO] DeploymentManager - Obtained Adobe Common Folder Path.
7/15/2013 09:09:37 [INFO] DeploymentManager - Adobe Installer launch location is :: C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\DECore\Setup.exe
7/15/2013 09:16:50 [INFO] AAMEEUtilities - Process creation completed.
7/15/2013 09:16:50 [FATAL] DeploymentManager - The return code from the Adobe Installer Process is (6).Stopping the installation process.
7/15/2013 09:16:50 [INFO] DeploymentManager - Starting to clean the partially installed payloads.
7/15/2013 09:16:50 [INFO] DeploymentManager - Undeployment XML created at path :: D:\Users\Vmbuild\AppData\Local\Temp\{2592DDC9-72BD-430A-B2EA-C2839B69B46E}\\{EE4FEE4B-4C1 3-44E5-8C22-230423DB10EF}
7/15/2013 09:16:50 [INFO] DeploymentManager - Starting to launch the Adobe Installer for uninstall mode.
7/15/2013 09:16:50 [INFO] DeploymentManager - Obtained Adobe Common Folder Path.
7/15/2013 09:16:50 [INFO] DeploymentManager - C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\DECore\Setup.exe
7/15/2013 09:20:21 [INFO] PIM-Uninstall - Build Version - 6.2.136.0
7/15/2013 09:20:21 [INFO] PIM-Uninstall - Logging Level verbosity Set to 4
7/15/2013 09:20:21 [INFO] PIM-Uninstall - Start: Adobe Application Manager Uninstall...
7/15/2013 09:20:21 [INFO] PIM-Uninstall - Get RIBS Product count
7/15/2013 09:20:21 [INFO] PIM-Uninstall - RIBS Products install status
7/15/2013 09:20:21 [INFO] PIM-Uninstall - Get NON RIBS Product count
7/15/2013 09:20:21 [INFO] Utilities - Folder does not exist
7/15/2013 09:20:21 [INFO] PIM-Uninstall - AAMRefs folder does not exists. Non-Ribs products does not exist on the system
7/15/2013 09:20:21 [INFO] PIM-Uninstall - NON RIBS Products install status
7/15/2013 09:20:21 [INFO] Utilities - File does not exist
7/15/2013 09:20:22 [INFO] Utilities - File does not exist
7/15/2013 09:20:22 [INFO] PIM-Uninstall - Launching RemoveAAM from: C:\Program Files (x86)\Common Files\Adobe\RemoveAAM.bin
7/15/2013 09:20:22 [INFO] UninstallAAM - argc: 2
7/15/2013 09:20:22 [INFO] UninstallAAM - Loading PIM.dll from: C:\Program Files (x86)\Common Files\Adobe\AdobePIM.dll
7/15/2013 09:20:22 [INFO] AAMEEUtilities - Process creation completed.
7/15/2013 09:20:22 [INFO] DeploymentManager - The return code from the Adobe Installer Process is (0).
7/15/2013 09:20:22 [INFO] DeploymentManager - Provisioning tool launch location is :: D:\Users\Vmbuild\AppData\Local\Temp\{0EAD2103-39AF-4D85-B942-CAC0E462C482}\\{731F139B-D8D 6-4870-AA90-9626C4D6D4E2}
7/15/2013 09:20:22 [INFO] PIM-Uninstall - Build Version - 6.2.136.0
7/15/2013 09:20:22 [INFO] PIM-Uninstall - Logging Level verbosity Set to 4
7/15/2013 09:20:22 [INFO] PIM-Uninstall - Killing all Non-Deployment workflows
7/15/2013 09:20:22 [INFO] PIM-Uninstall - Check and wait on Adobe installer (Bootstrapper) if running...
7/15/2013 09:20:22 [INFO] PIM-Uninstall - Check and wait on Adobe installer (RIBS) if running...
7/15/2013 09:20:22 [INFO] PIM-Uninstall - Check and wait if ACF is locked...
7/15/2013 09:20:22 [INFO] PIM-Uninstall - Check and close Adobe Application Manager notifiers...
7/15/2013 09:20:22 [INFO] Utilities - Semaphore is not locked
7/15/2013 09:20:22 [INFO] PIM - Executing install modifiers
7/15/2013 09:20:22 [INFO] PIM - Build Version - 6.2.136.0
7/15/2013 09:20:22 [INFO] PIM - Logging Level verbosity Set to 4
7/15/2013 09:20:22 [INFO] PIM - CREATE PIM Instance ...
7/15/2013 09:20:22 [INFO] Utilities - File does not exist
7/15/2013 09:20:22 [INFO] PIM - trying to createOrUpdatePIMDbSchema.
7/15/2013 09:20:22 [INFO] PIM - Current db schema version on machine 1.
7/15/2013 09:20:22 [INFO] PIM - Current db schema version to install 1.
7/15/2013 09:20:22 [INFO] PIM - PIM DB Schema is up to date. Current schema version is 1.
7/15/2013 09:20:22 [INFO] PIM - PIM Database is Up To Date.
7/15/2013 09:20:23 [INFO] Utilities - Path to Process :C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\\CCM\Utilities\AdobeCreativeCloudClient.exe Process Directory :C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\\CCM\Utilities arguments being passed :"C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\\CCM\Utilities\AdobeCreativeCloudClient.exe" --unregister=true --deleteShortcut=true
7/15/2013 09:20:23 [INFO] Utilities - Success in CreateProcess
7/15/2013 09:20:23 [INFO] AAMEEUtilities - Process creation completed.
7/15/2013 09:20:23 [INFO] DeploymentManager - The return Code from Provisioning Tool (0).
7/15/2013 09:20:23 [INFO] DeploymentManager - Provisioning Tool has successfully UnSerialize the product.
7/15/2013 09:20:23 [INFO] DeploymentManager - The install workflow is terminating.
7/15/2013 09:20:25 [INFO] Utilities - Sucessfully launched and executed process...
7/15/2013 09:20:25 [INFO] PIM - Successfully executed uninstall modifier at path: 'C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\\CCM\Utilities\AdobeCreativeCloudClient.exe'
7/15/2013 09:20:25 [INFO] PIM - PIMSqlite closeDB status 0
7/15/2013 09:20:25 [INFO] PIM - FREE PIM Instance ...
7/15/2013 09:20:33 [INFO] UninstallAAM - Self delete called to delete RemoveAAM.bin and AdobePIM.dll...Office 2010 64 bit as dependency.
2. Registry used to fool the application that 64 bit version of PowerPoint is already installed.
Although source works with 32 bit powerPoint . but MSI need 64 bit powerpoint . -
Is it supported by Adobe to create an App-V package from Acrobat 12?
I know there are many recipes in the web to create an App-V package from Acrobat 10 or 11, but is this officially supported by Adobe?
I found this for Acrobat 11: App-V Deployment — Enterprise Administration Guide
It´s stated explicitly there that Acrobat is not supported, only the Reader.
Regards
tuxhaterCreating an APP is a very in-depth process. And getting the few people to be able to share it, can be difficult.
You probably would do better with an interactive PDF. Your main concern would be finding a PDF reader for iPads and tablets that will play all your buttons. But that's not really a problem.
If I can be so bold, you might want to look at my book, Digital Publishing with Adobe InDesign CS6. (Don't let the CS6 throw you, for your needs, everything is the same.) -
Cannot purchase games from steam websie
i can load and play existing games from the games website steam - but cannot make any new purchases - item goes into basket and then freezes before the purchase completese - i am using bt infiniy with hub 5. this has ocurred since the router was changed from hub 3 with openreach white box to just the hub 5. i tried various devices and browsers and came to conclusion that it was the hub 5 that was blocking me. to prove his i visited relatives house - logged onto their adsl bt broadband -hub 3 - can make purchase without any problem - why is the hub 5 blocking me from purchasing from this particular website??
I am having the same problem with other websites..like Hertz UK or National Rail. It appears whenever I get to the "verify by visa" page at the end of a purchase. The verification page never loads. I have contacted Barclaycard and they immediately asked me if I was using a BT Broadband connection which of course I was. I have contacted BT via chat and all they could suggest was a "factory reset" of my hub 5. They said they do not have a problem (Barclaycard said they have been in touch with BT to try and get the problem fixed). I only just received my hub 5 and got set up on 18th August and I have not been able to make any online purchases yet on any of my home computers so it is definitely a BT or hub 5 problem. I never had a problem using a previous Talk Talk service with their wireless router. I have done the factory reset but not tried another purchase yet.
-
Creating a package from Github source and install instructions
hello
I've read that the correct way to install things is to make a package from source if it's not in a repository.
Install instructions: https://github.com/yaxu/Tidal/blob/mast … l-linux.md
I copied /usr/share/pacman/PKGBUILD.proto into the source directory but was having difficulty getting it to work.
I've actually just done make clean; make like it says in the instructions since I was thinking it's not installing anything (since it's not "make install").
It seems to have changed a few things in /usr/local/include...
I guess I'd like help creating the package,
and possibly undoing what I did with make clean; make.
ThanksTidal itself does not have a Makefile (except for its docs), so I suppose you’re talking about Dirt’s makefile. From what I can see it shouldn’t touch /usr/local/include or anything outside the build directory as long as you don’t run “make install”.
Arch doesn’t put anything in /usr/local anyway, as far as I know, so you can probably easily see if Tidal or Dirt put something in there…
It might be easier for you to first build Dirt and Tidal manually and then make a PKGBUILD once you know the different steps required. -
Issue with the Package/request while creating service from function module
Hi
I'm creating a service form a function module. After the web service creator starts, There is a last step that asks for package and transport request. If i choose local objects, showing error as "Test Objects cannot be created in foriegn namespaces. If i give the package as it is in the attributes of the function module and transport request, showing error as " No tasks exists under the request. What is transport request??
please if anyone has recently done such a process with NetWeaver PI 7.1. help me..
Thanks
VijayYou have to create a package for your objectsin SE80 transaction.
How?
http://www.sap-img.com/basis/steps-for-creating-package.htm
Then assign this package name in your webservice creation.
When asked for a transaport request, create one(You will find a create transport request inthe pop up which prompts you for creation of transport request).
Regards,
ravi kanth talagana -
GE620DX - new Nvidia driver breaks steam games
Hi,
Yesterday I upgraded the graphics driver on my GE620DX to the one just released (285.98) downloaded from here:
http://www.msi.com/service/download/nbdriver-17287.html
After doing this all my Steam games that are configured to use the NV graphics card would fail to start with an 'error code 51' message appearing. Switching them back to integrated graphics allowed them to run. This didn't seem to happen with non Steam games as I was able to run WoW, which is set to run on the nvidia card.
I put the previous driver back (269.13) and this problem stopped happening so I'm pretty sure there's something wrong with the new drivers or the way Steam interacts with them.
MartinSettings prog is bugged? How? It's to early to check everything but I could sucessfully run nvidia-settings and for example add a shadow to mouse cursor :-) I don't use it to restore the settings and I don't think it's very useful at all except maybe for gamers so it's not a big deal.
As I said I'm not using twinview too - I'm running tv-out but as a second screen (standard xfree way to do this). The lower resolution is not a problem then. But people who are using twinview for their own reasons (like external monitors connected to notebooks, cloning crt on the tv, etc. etc.) should consider staying with the older drivers for some time. Maybe it's a bug and nvidia will release a new driver with 1024x768 on the tv enabled again? - That's just a warning and I suggest to backup your older nvidia arch package if someone is using it. -
[Solved] All Steam games have low FPS
Hello Archers!
I have recently switched back to Arch a few weeks ago and did not have these issues. However, I did a reinstall due to my own f**kup (it was faster to reinstall) a couple days ago and since then I have had terrible performance with Steam games no matter if I set them to low settings and low resolution or in windowed mode. The only thing I have done different from that install versus this one is I installed KDE instead of Gnome. This issue happens with all games I have and a list of most played are below. I am using the Open ATI driver due to the FGLRX driver not wanting to use both of my monitors at once. Has anyone had this issue before? I am going to look through the Gnome packages and see if there are any graphics related packages that I may try to install.
System:
Core i7-2600k
12GB of RAM
2x AMD Radeon 6950's
256GB Crucial SSD
1TB HDD
2TB HDD
1000W PSU
Games:
Half-Life Series
Dota2
Portal
Bastion
X3 Series
Last edited by Fall (2013-08-18 22:33:20)Figured it out... I forgot Steam and games are 32bit applications and all I needed lib32-ati-dri
Last edited by Fall (2013-08-18 22:34:19) -
My Monster Hunter 4 game never arrive after 10 days of order.
Last track of item was when UPS transfer the package to USPS, but from USPS tracking number, only preshipment created, but not receiving the package from UPS.Hello kongkong32,
As someone that shops online a lot, probably too much, I know what it’s like to have a package not show up when expected. Sorry if the unknown whereabouts of your order has caused any frustration or worry.
This sort of thing can happen if the carrier has missed a step in the tracking updating process; typically from missing a scan somewhere in the item’s shipment journey. I would be happy to reach out to USPS on your behalf, but will need some more information from you in order to do so. If you would please send me a private message confirming the following information, I will begin my investigation:
· Your BestBuy.com order number
· Your full name
· Your shipping address
Click on the “Private Message” in my signature below to send me a private message.
Regards,
JD|Social Media Specialist | Best Buy® Corporate
Private Message
Maybe you are looking for
-
Select-options in WEB UI View on SAP CRM7
Hello, I wanted to know how to make a u2018select-optionu2019 on a view in Web UI on CRM7. Is there a standard BSP application that I can use in component usage for this? I need to have show only one value but for one field I may have several values
-
Z61t upgrades to allow windows 7 64bit?
I have a z61t - 9441 CTO I didn't think far enough ahead (ahem, i was cheap) when I bought it, so it only has a Core Duo (T2400) right now. I'd love to upgrade to Windows 7, but it seems that I can only run the 32bit version with this CPU. Since I'd
-
Wrapping text with web dynpro ALV
Hi there, I have got an web dynpro ALV and have set the SET_FIXED_TABLE_LAYOUT value to abap_true. This provides what i need apart from instead of not showing the text that can not be fit into the available column width I would like it to wrap the te
-
When I try to place a picture in photoshop CS6 either from drag&drop in the application window or from the place command, my image gets automatically resized based on the resolution (pixels per inch) of my document. Example: I create a new blank docu
-
I need help in ssrs 2008 reporting, any help would be greatly appreciated. Thanks in advance. I need to filter a dataset by a date field (just by year though) either all the years or just one year. I created a custom field to pull the year out separa