Mixing Batches
I'm having the material i.e solvent qty in one batch number. I received same material with other batch number. That receiving batch number will go to Quality. After analysis we will mix the two batches i.e previous one and received one with a new batch number. While mixing i activated QM '08' inspection type. While doing MB1B i'm getting two lot numbers. But i need only one lot number. How can i?
Hi Narendra,
Please set following settings in the Material master QM view to get the Single inspection Lot for when you mix the multiple batches
In Material master QM viewInspection Set up_*08-In the Control ins lot --select the 1-For each material document, material , batch,stotrage location*
Thanks,
Rajanikanth
Similar Messages
-
Do we have function to mix old batch when stock transfer?
Dear Guru,
I have a requirement as detail below.
- We have storage location 0001 and 0002.
- At storage location: 0001 has material code: 30001 as batch: BBB
- At storage location: 0002 has material code: 30001 as batch: AAA
- We would like to move stock from Sloc: 0001 to 0002 as mix batch AAA + BBB to new batch: CCC.
Is it possible to post only one time?
Now we have to stock transfer from Sloc: 0001 to 0002 and then transfer posting (Batch to Batch).
Please kindly advice. Thank youcarry out MB1b and mtype 309 and change the receiving batch to same number
suresh -
In the client's WH there can be pallets (storage units) with multiple batches. This is configured and works OK. However these storage units cannot be moved. Obviously when moved, they must keep their SU number.
If I try to move only 1 batch, the movement is not allowed because then a duplicate SU will result.
If I try to move the whole quantity, the data in the TO will not be consistent.
Actually in both cases I get the message
Storage unit XXXXXis not consistent with other transfer order data
I have tried moving them in LT01. I also tried in LT10 - here the system moved both but assigned a new SU to one of the batches. (?!?!?!?!)
Is there a way to move such pallets? And if not , why is there a config option for mixed batches for SU, IF IT DOES NOT WORK???
Edited by: HunLogistic on Feb 10, 2010 3:34 PMIn the client's WH there can be pallets (storage units) with multiple batches. This is configured and works OK. However these storage units cannot be moved. Obviously when moved, they must keep their SU number.
This is obviously not true.
The storage unit number uinquely identifies the storage unit within your warehouse. If you pick up goods from your storage unit you cannot use the same ID for the new unit since in this case you would have two SUs with same ID in your WH.
Standard system is working poperly, you can have mixed storage units with different materials and batches and you can use complete and partial stock removal w/o any problem - please see online help.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/c6/f846eb4afa11d182b90000e829fbfe/frameset.htm
If you only transfer a part of the storage unit into another SU-managed storage type, the system assigns a new SU number for this part of the original SU...
Isn't it possible that there's a developemnt which want to use the existing SU number for the new one?
Regards,
Csaba
Edited by: Csaba Szommer on Feb 10, 2010 4:08 PM -
How to install just the Adobe 7 Writer PDF printer
In our environment we need to be able to print to PDF, but we also have a 3rd party formcreation software that needs Adobe 8 reader to capture digitized signagtures.
After testing we have found out that we need to have the PDF printer functionality of Writer 7, and the digitized signature capture ability from 8. Problem is that the 7 install (no matter ther order of installation) take priority over the 8 install and does not let us use 8 to sign the document.
the ideal fix is being able to install just the pdf printer from 7 Writer.
Network is a mixed batch of XP and 7 machinesArtisan Bytes wrote:
Has the ability to download only the 64-bit version of the CC apps been inclided in the current release?
Nope, still using users HD space and bandwidth. The official June 17th release is still downloading and installing both 32-bit & 64-bit.
Double copies of CC apps installed - Why, and how to delete?
http://forums.adobe.com/message/5435919 -
Hi,
I have a query relating to the determination of bins for my bulk putaway strategy.
On my bulk storage type I am using putaway strategy B (Bulk Storage) and mixed storage indicator C (several batches per bin only SU bulk storage)
Having generated a putaway the system successfully denotes next empty bin until capacity as per the block structure under OMM4 is full. So far so good however it does not then allocate the remainder of the putaway to a bin where the same product is house although a different batch. (ie the error message below appears)
System message L3 009
No destination storage bin to be found in storage type 004
However i can manually denote a bin where there is already the same material but with a different batch. The system then allows this entry.
Does anybody understd why the system would not automatically select this bin which should be ok?
Any ideas appreciated.
many thanks,
Adam.Must be a slow start to the year...too many Xmas ales...
Solution: Set Level of Total Quant Count to 1
Level of Total Quant Count
The Total field is used for internal calculation of the total quant count for SU-managed bulk storage. This parameter influences both stock placements and stock removals.
Stock Placement
For putaways this parameter controls whether the system will automatically mix batches or not. If the parameter is set to "1" (batch neutral), the system looks for a storage bin where the material already exists. The batch number is not taken into consideration in this case. If the parameter is set to "2" (batch specific), the system looks for a storage bin where the batch of the material already exists and attempts to add the new stock to the existing stock. If that isnu2019t possible, the system looks for an empty storage bin. -
Dear all,
This is my client requirement , kindly give your suggestions for this one.....
As per my client business process upto semifinshed is Make to stock, they plan every 3 to 6 months before and produce the material and keeping the stock always, for the finished good material once they get any order from customer as per their specification they produce the finished material( Only blending of SFG material)
My requirement is client dont want to run MRP for FG material, because SFG and packing material always available in stock.
For the Production of FG material they blend 2 to 3 batches of SFG only so they dont know initially what are all the batchs they will add for this FG order, using some table calculation only they will decide the batch numbers of SFG material, because FG material specifications will change always customer to customer.
For FG i plan to create process order manually in COR1 and in the ref i will give my sale order number also, but my requirement is system as to consider my sfg stock for this process order(ref of Sale order), for this what strategy i want to use for SFG ( demand Planning ) and FG ( Make to order).
I dont want to convert my SFG and packing material stock to sale order stock every time system as to consider my open stock and allow me to issue open stock to process order.
Regards,
s.sakthivelDear Mr.R.Brahmankar,
Thanks for u r reply, i have clearly explained upto semi finished is make to stock, always i plan for SFG only not FG material, because my FG is not fixed one and as per customer requirement it will change.
I explain my process once again, semi finsihed is only one material and every batches having different result, means one batch A bloom is 200, another batch B 220 and another batch C 235 like this not only bloom like all other parameters. so i always planning for my SFG in MD61 and make it stock ready for at any time.
one customer place the order for FG if he wants 210 blom order i will mix batch A and B to blend and give to him, so like this customer to customer varies specification always, not only the bloom like this other parameter also. At the time of sale order i dont know which batch i plan to mix, becuse for this i use one calcutaion table then only i decide for this order these are all batch we have to use for his requirement.
SFG material and Packing material always is having stock so i dont want to run MRP for FG material and once i get any sale order i create FG process order manually in COR1 and in the ref field i give my sale order no so this process order for this sale order i can get ref any time.
My requirement is if i create process order for FG with ref Sale order system as allow to me for Goods issue for SFG and Packing material and after production of FG, system block this batch for this sale order only.
For this what strategy i want to use for SFG and FG, what settings i have to do for this
Kindly help me.
Regards,
s.sakthivel -
Captured AVI type2 files shown up short after imported in CS3 PremierePro
Am a new user with On Location 3.0.159. Have encountered strange issues to the AVI type 2 files record via through 1394 from DVcam Deck Playout in slave mode. When clips imported to CS3 Premiere Pro, files read only 10' only on the time line as rest of files looks as cut out and missing where the original recorded clips were 28' in total. Have checked with scrubbing through DVR as both Video/Audio were fine in full 28' duration and there weren't any issues or error before the clips was ejected. Also I've checked the files with other player and they also reads 28" in full. Am I missing something?
Currently using latest CS3 Premiere Pro 3.1.1 with XP2 platform.Took me couple of days nailed down where the problem was since there eren't any log's or error found nor system error as indicated.
OnLocation/direct to disk recording has no issues at all with these files batches, it acturally does faultlessly with tape direct captured to disk as well as Camera. The reason am trying captured batch of contents that runs for more than 4hrs. And working with CS3 Premiere under AVI-1 type take much longer conforming and indexing the contents as such. So by switching with OnLocation using AVI-2 type which Premiere like reducing the confroming time by almost 1/2, due to the fact that I'm working with mixed batch of contents in the field.
As for the issused am experiencing with these file were caused by 3rd party plug-in codec, some references already demonstrated and addressed with similiar issuses in the Premiere CS3 user forum, ref link http://www.adobeforums.com/webx/.3c064185
After I've un-installed the 3rd party plug-in, and bin it back to Premiere CS3, and there weren't any further issues with these batched captured AVI-2 files. All shown in full faultlessly!
Think this app really comes in handy for field user.. anyway thanks for your response..
and now needed to re-look into these 3rd party codec. -
Hi all
I am new to apps 11i,my boss just came with a requirement of creating employment certificates in erp,
Can someone guide me to create an offer letter for each employee with the company header
Kindly let me know if any details are needed as i am new to apps
thanking in advance
regards
oracleuserhi
i did ctrl+L ,a small pop up box comes asking to type the interent address of the document we wish to search for
these are things i view when i got to hrms responsibility
abc HRMS Manager
Flex Values
Payment Invoice(PY)
People
Enter and Maintain
Salary Management
Events and Bookings
Delete Personal Records
Manage Contracts
People : Maintain Using Templates
Hiring Applicants
Entering Employees
Maintaining Employees
Entering Contingent Workers
Maintaining Contingent Workers
People : Total Comp Participation
Person Benefits Balances
Person Benefits Assignments
People : Total Comp Enrollment : Benefits Enrollment
View Enrollment Results
Non-flex Program
Savings Plan
Miscellaneous Plan
Enrollment Override
Dependent/Beneficiary Designation
Person Primary Care Provider
Person Life Events
People : Total Comp Contribution
Record Continuing Benefits Payment
Monthly Participant Premium
Monthly Premiums
Manual Payments
People : Mass Updates for Person
Mass Update of Applicant Assignments
Mass Update of Employee Assignments
Mass Update of Assignments
Fast Path
Address
Picture
Special Information
Contact Information
Event for Person
Phone Numbers
Absence Information
Application
End Application
Assignment
Assignment Costing
Assign. Budget Values
Grade Step Placement
Secondary Status
Pay Method
End Employment
Employee Review
Salary Review
Salary History
Element Entry
Accruals
Tax Statement
Statement of Earnings
P45 Form
Adjust Balances
QuickPay
Reverse Payroll Run
Extern./Manual Payments
Person Type Usage
School/College Attendance
Assignment Rates
Element Entry
End Placement
Work Structures
Location
Status
Recruitment Letter Type
Contract Letter Type
Elections
Assignment Rate Types
Collective Agreements
Collective Agreements and Grade Structures
Work Structures : Collective Agreement
Define Entitlement Item
Define Collective Agreement
Define Collective Agreement Grades
Define Eligibility Profiles
Define Derived Factors
Work Structures : Organization
Description
Organization Manager
Hierarchy
Diagrammer
Work Structures : Job
Description
Path Name
Career Path
Job Groups
Work Structures : Position
Description
Hierarchy
Mass Move
Diagrammer
Position Transaction
Position Copy
Mass Position Update
Work Structures : Grade
Description
Grade Rate
Pay Scale
Point Values
Grade Steps and Points
Progression Approval
Work Structures : Budget
Budget Worksheet
Budget Details
Budget Reallocation
Budget Calendar
Budget Set
Budget Characteristics
Budget Migration
Payroll
Description
Consolidation
Payment Methods
GL Flexfield Map
Update Payroll Run
Assignment Set
Element Set
RetroPay Set
GL Daily Rates
Conversion Rate Types
Monetary Units
Balance Sets
View
Vacancies
Grade Comparatio
Employee Accruals
Payroll Process Results
Assignment Process Results
System Messages
View : Histories
Worker Assignment
Absence
Run Results
Salary
Entries
View : Lists
People Folder
Assignment Folder
People by Assignment
Assignments
Workforce by Organization
Workforce by Position
Workforce by Position Hierarchy
Employees by Element
Employees by Absence Type
People by Special Information
Processes and Reports
Submit Processes and Reports
View Requests
View Reports
Workflow Notifications
Define a QuickPaint Report
Run a QuickPaint Report
Submit Custom Reports
Process Log
Batch Process Parameters
Monitor Batch Processes
Mass Information eXchange: MIX
Batch Element Entry
BEE Summary
Mass Information eXchange: MIX : System Extract
Layout Definition
Criteria Definition
Extract Definition
Extract Results
Change Event Log
Other Definitions
Person Types
Application Utilities Lookups
Special Information Types
Table Structure
Table Values
Time Periods
User Profile Options
Formula Functions
User Types and Statuses
Dynamic Trigger Definition
Dynamic Trigger Functional Area Grouping
Table Event Updates
Other Definitions : Payroll Exception Reporting : Payroll Exception Reports and Groups
Reports
Groups
Security
Profile
Assign Security Profiles
CustomForm
Information Types Security
Report Sets
Task Flow Nodes
Task Flow Definitions
Forms Configurator
Contexts
Transaction Status
Task Flow Unit kindly help me
thanking in advance
regards
oracleuser -
Hi,
I would like to manage a batch recipe with LabView.
I have to change set points on a lab process plant, moving though "phases" of the batch process on
- manual commands
- with a time schedule
- by events from DAQ
I would like to store and manage a recipe from a file (XLS or CSV), and drive the process in an simple HMI.
I suppose Lookout could be the right answer, but I have to work with LabView+DSC on a PC.
Anyone knows example / tools to help me in development ?
Bye LucaAs you seem to be aware, Lookout is an excellent fit for a batch recipe application. Lookout even has a "recipe" object, and shipping examples that demonstrate creation of recipes. Additionally, a full chapter of the Lookout Basics Course (Lesson 5) is devoted to the creation of a sample "Cement Mixer" batch project centered around the recipe object.
With LabVIEW DSC, recipes are not pre-packaged as they are in Lookout, but they can certainly be implemented. You could use the File IO functions (ie Read from Spreadsheet File.vi) to pull your recipe information from a CSV file. Then, you can use Sequences and Cases to perform the various logic / control of the recipe. But unfortunately, I am not aware of any specific pre-packaged examples for DSC.
Regards,
Greg Caesar
National Instruments,
Applications Engineer -
K9A2 Platinum Cold Boot problem
Hi, recently I have encounter this problem on my K9A2 Platinum that didn't occur before, where after powered off for a few hours, when booting up, there is power to the system but the system won't boot (i.e. no POST or anything). The reset button on my chassis also won't work at that time. And after pressing the power button to shutdown, it won't power up again until I've turn off the mains and wait until the power LED on the mobo to turn off and turning on the mains again.
After that, my system would be able to boot successfully, but the bios clock will be slow by a few hours. E.g. current time 9am, bios time 5am. I've tried flashing the bios to the latest version and resetting the bios settings doesnt help at all.
Can anyone plz help me?
My current rig config is
K9A2 Platinum w/ phenom 9500
6gb kingston ddr2 1066mhz
PowerColor HD3870
Xonar Essence STX
Coolermaster RPP 750w
Thanks a lot in advance.Quote from: Henry on 23-March-10, 07:29:17
Did your problem start after you added this mixed batch of RAM? When did you add RAM to what you had 2 years ago? AMD works best when only 2 sticks are used and you have messed that up by adding 2 more sticks of different RAM. Does it work OK if you remove two of the sticks?
Not really, I had the mixed batch of ram for almost 8 months without any problems. And the cold boot problem does not happen everytime. I've just tried booting up without any issues this time round. I would see if the problem occurs again and test it with a new cmos battery. -
Batch Rename Order Getting Mixed Up
When batch renaming a large amount (usually over 100) of RAW NEF photos, in the format of YEAR_Month_DAY_TIME_#### (where #### is a 4 digit sequence number) EX/ 2014_10-25-122506_0001, the files get renamed and when sorted by file name are in order, however the 4 digit sequence number gets mixed up somewhere along the way.
It usually happens after the mid hundreds.
Example, I had apx 900 images in one folder I batched renamed, and the sequence number progressed properly from _0001 to _0191, but then the next image went straight to _0232.
Any one else experience this issue or have any ideas as to a solution? Very frustrating issue.
Thanks!Thanks, Tulse... i'm glad that it's an issue that can be reproduced by others. I'm amazed that it hasn't come up (perhaps it has) in the time since Keynote was released. I'm even more amazed that what seems like such a significant bug hasn't been addressed yet. I just hope a new version of Keynote is coming soon that will address things like this.
The reason i'm doing so many build ins and build outs is because i want the content of the slides to transition independently of the background. This is something i would love to see in the next version of Keynote.
For example, i'm using a looping video clip as the background, with our company logo superimposed over it. I'd like for the foreground text and other graphical elements to transition from slide to slide, but leave the background constantly looping. So instead of an empty black "stage", i can have 3D effects applied at the slide level without disturbing my own background.
Anyway... i tried using the blank slide as an intermediary and did not have the success that you did. Build orders still ended up different from those on the master slide.
I wonder if the builds need to be created in the order in which i want them to appear... it seems like new slides may be ignoring the order in which the builds have been dragged around in the Build Order inspector on the Master, and instead, executing them in the order in which they were created. -
Putaway and picking in ERP-WM with SU and batches with mixed stock
Hello all,
I configured a WM warehouse with SU management, and batch management. We have bulk storage for example of 20 pallets. each pallet may have its own SU and batch numbers. As a result we may have in the bulk storage 20 SUs with 20 different batches.
I have 2 problems:
1. in Putaway strategy B (Bulk) - although the storage type is configured to allow mixed storage - automatically the system chooses the next empty bin. How can I force the system to add to existing stock instead?
2. in Outbound Delivery (when the batch number is not entered in the delivery), when I create the TO (through LT03), the system proposes a FIFO batch number (again, we are talking about Bulk storage). How do I tell the system not to determine the batch number - but instead take it from the chosen SU on confirmation?
Thanks,
IsaacHi,
1. in Putaway strategy B (Bulk) - although the storage type is configured to allow mixed storage - automatically the system chooses the next empty bin. How can I force the system to add to existing stock instead?
In Bulk system would only one SU type perBin. If the next SU is of diferent SU type then it would propose the next Bin.
2. in Outbound Delivery (when the batch number is not entered in the delivery), when I create the TO (through LT03), the system proposes a FIFO batch number (again, we are talking about Bulk storage). How do I tell the system not to determine the batch number - but instead take it from the chosen SU on confirmation?
In this case you do not setup batch determination at delivery or WM level.
Since this is Bulk, system will allow for SU number to be entered during picking.
However the Batch number population in TO upon SU selection is doubtful.
Hope this helps. -
Multiple batches mixed in single vessel
Hai,
I have the below scenario and wondering if anyone could provide a solution:
Material is same here.
We receive batch#1 , 100 Gallons (against a Purch order) and store it in Vessel. Vessel capacity is 1000 Gallons. We withdraw 10 Gallons from the Vessel. Then, we receive Batch # 2, with 100 Gallons (against the same Purch order) and store it in the same Vessel. Now the total quantity = 190 Gallons. Then, we receive another Batch#3 with 100 Gallons and store in same Vessel. This process continues and we keep withdrawing quantities out of the Vessel. As you see the batches are mixed-up in the same Vessel and we do not know which Batch has actually been withdrawn completely. We need some kind of solution when there is a recall. I know that they are all mixed-up. I am just asking if anyone has come across this kind of issue and how they dealt with? Or is there any specific functionality within SAP that we can use? We are running ECC 6.0.
Thank you
SonaliHi,
As you have mentioned, all the batches are mixed-up in the same vessel so it is impossible to identify which one is used.
We had a similar requirement with consignment, same material from multiple vendors stored in same tank.
Can only be implemented with multiple vessels.
Cheers ! -
Currently running 2x512 Crucial Ballistix in slot 1&2 stock speed 2.2.2.5 - stable. I'm desperate for 2 gigs of ram but thanks to a nagging wife and lack of funds this isn't possible yet, but i do however have 2x512 Corsair value sticks (2,5.3.3.8) in an old machine which i can take out and put with the Crucial Ballistix to make to 2 gigs (4x512). I'd just like to know if mixing them is a good idea or am i asking for trouble.
Any advice, tips are most welcomeHello Billy,
Your wife is not nagging you. She just has great looks and excellent computer savy and does not want you to buy or mix memory sticks.
Mixing memory stick as per your plan will only cause lost system performance and instability. You have a Winnie CPU so you will definately need to run at 2T. The timngs, voltages, and chipset of your ballistix and corsair sticks are quite diversed. I own four stick of Ballistix RAM made from different batches. Crucial professed that they do not have to worry about matching dual channel pairs but my own test here reveal a 140 to 176 megs bandwidth performance difference between newer and older pairs (older better). Using this has a comparaison you can just imagine what associating ballistix and corsair would be like.
In summary Billy, unless you are an Italian noble who like self-inflicted pain, is not to mix your crucial and ballistix Ram sticks. Work on the wife instead, wine and dine her, so that you can talk her into letting you buy 2 X 1Gig sticks of PC 400 Ballistix sticks.
Good luck with the frau, -
Spool getting mixed in SM37 transaction
Hi All,
After a Batchjob is run/completed. When we select the Batch Job and click on the button SPOOL, we are getting incorrect spool. The spool is getting mixed with spool of other Batch Jobs. Sometimes when i click on the button SPOOL, am getting message No List Available even when the spool is available.
Please let me know how to resolve this issue.
Thanks,
IbrahimHi everybody,
Please help me out. I tried to debug the program using JDBG but could not find out when the job is creating spool.
Maybe you are looking for
-
How do i move a file from one external drive to another
This is my first Mac computer and I have no idea how to move/copy a file from one external hard drive to another? It won't let me drag and drop from one Finder window to another and there is no copy/paste option on the left mouse click.
-
HT4534 i accidentaly erased the application system prefences how do i get it back?
i accidentaly erased the application system prefences how do i get it back?
-
Cannot drag and drop file from photos app to photoshop
Hi, I'm trying to open a file saved in my Photos library in Photoshop. Previously in iPhoto I could drag and drop the file to open in other applications including Photoshop but this functionality appears to be missing in the new Photos app. Am i miss
-
Install mountain lion on other mac
hello, I buyed a macbook pro retina with mountain lion. So I want to update my imac with it. I can't download the osx from the app store or anything else to get an installdata. You're welcome to post some help!! thanks
-
Autoproxy URL is not working in firefox but same is working for IE after connecting to VPN
Seems like different issue. When I connect to office VPN,it automatically use autoconfiguration script in IE and I am able to access websites in IE but when I try the same in mozilla & enter autoconfiguration URL in mozilla firefox, it didnt work.Kin