MM basics and development

Hi Experts,
I have to start some work in MM module most of the work is reports, but i dnt no anything about MM so can anyone please tel me about MM development details i seacrhed for MM tables But what is the basics for MM i dnt no.
First tel me about general MM (not related to SAP) and then about SAP MM so that i can understand easily in a good manner.
Regards
NIkhil

Hi,
MM Cycle:
Purchase Requisition-> STaff in an orgn places Pur requisition for want of some goods/products - ME51
Request for Quotation(RFQ)-> The Purchase dept in the orgn calls/requests for the quotation for the products against which PR was raised. - ME41
Vendor Evaluation->After receving the RFQ's, after comparison a Vendor is finalised based on the terms and conditions.
Purchase Order(PO)-> Pur order was issued to that vendor asking him to supply the goods/products -ME21N
Goods Receipt Note(GRN)->Vendor supplies the material/Products to the orgn-
MB01
Goods Issue (GI) -> People receives their respective itesm for which they have placed the Requisitions
Invoice Verification-> ALong with the Material Vendor submits a Invoice for which the Company Pays the amount - .MIRO
Data to FI -> data will be posted to FI as per the vendor invoices
TABLES and Important Fields:
LFA1--Vendor Master-General (LIFNR,NAME1,ORT01)
LFB1--Vendor Master(Company Code)(LIFNR,BUKRS,PERNR)
LFC1--Vendor Master (Transaction Figures)(LIFNR,BUKRS,GJAHR)
LFM1-Pur.Orgn. Related Vendor Data (LIFNR,EKORG)
MARA--Material Master-General (MATNR,MTART,MATKL)
MARC--Material Master-Plant data(MATNR,WERKS,EKGRP)
MARD--Material Master- St.Location Data(MATNR,WERKS,LGORT,LABST)
MAKT--Material Descriptions(MATNR,MATKL,MAKTX)
MBEW--Material Valuation Data(MATNR,BWTAR)
MVKE-Material Master: Sales related Data(MATNR,VKORG,VTWEG)
MDKP--MRP related data(Header)(DTART,MATNR,PLWRK,PLSCN)
MDTB-MRP Table(DTNAM,DTPOS,PLANR)
MCHA--Batches (MATNR,WERKS,CHARG)
MCHB-Batch Stocks(MATNR,WERKS,LGORT,CHARG)
EBAN-- Pur.Reqn. Data (BANFN,BNFPO,BADAT,MATNR)
EBKN-- Purchase Requisition Account Assignment(BANFN,BNFPO,VBELN)
EINA- Purchase Info.Record (General Data)(INFNR,MATNR,LIFNR)
EINE-- Purchase Info.Record (Pur.Orgn Data )(INFNR,EKORG)
ELBK-- Vendor Evaluation Header Data(LIFNR,EKORG,KLASS)
ELBM-- Vendor Evaluation: Material-Related Item(LIFNR,MATNR,EKORG,INFNR,HKRIT)
ELBP- Main Criteria for Vendor Evaluation (LIFNR,EKORG,HKRIT)
EKKO-- Purchase Order Data (Header)(EBELN,BSTYP,BSART)
EKPO-- Purchase Order Data (Item)(EBELN,EBELP,MATNR)
RFQ and PO are differentiated by Doc Type(BSTYP)in EKKO table.
For RFQ it is A and for PO it is F.
MKPF-- GRN Data (Header) (EBELN,BLDAT,BUDAT,XBLNR,BKTXT)
MSEG-- GRN Data (Item)(MBLNR,BWART,LIFNR,MATNR,EBELN)
Apart from this there are lot of tables which begin with 'M'& 'E', but we
use the following very often.
EQUK--Quota(header) (QUNUM,MATNR)
EQUP-Quota(item) (QUNUM,QUPOS,LIFNR)
ESLH--Service Package Header Data (PACKNO,EBELN,VBELN)
ESLL--Lines of Service Package (PACKNO)
ESUH--Ext. Services Management: Unpl.Service Limits: Header Data(PACKNO)
ESKN--Account Assignment in Service Package(PACKNO)
EKKN--Account Assignment in Purchasing Document(EBELN,EBELP,VBELN)
EKBE--PO History Data (EBELN,EBELP,BELNR,BLDAT,MATNR,VGABE)
EKBZ--PO History with delivery Costs(EBELN,BELNR,LIFNR,XBLNR)
EKET--Schedule lines data of a PO (EBELN,EINDT,SLFDT)
EKES--Vendor Confirmations Data(EBELN,EBTYP,EINDT,XBLNR)
T001W-- Plants (WERKS)
T001L-- Storage Locations (LGORT)
T300- Warehouse Numbers(LGNUM)
T301- Storage Types(LGNUM,LGTYP)
T320- Assign. Stor.Locn to WM Warehouse(WERKS,LGORT,LGNUM)
T163F--Confirmation Texts(EBTYP,EBTXT)
T156-- Movement Types(BWART)
T024-- Purchasing Groups(EKGRP,EKNAM)
T024E--Purchase Organizations(EKORG,BUKRS)
T024W--Plants Assign.to P.Orgn(WERKS,EKORG)
T161-- Purchasing Document Types(BSTYP,BSART)
T163-- Item Categorys in Purchasing Documents(PSTYP)
T149D--Valuation Types(BWTAR)
T134-- Material Types(MTART)
T179- Material Product Hierarchies(PRODH)
T179T-Material Product Hierarchies: Texts(PRODH,SPRAS,VTEXT)
TJ02T-System status texts(ISTAT,SPRAS,TXT30)
STKO-- BOM(Bill of Material)(Header)( STLTY,STLNR,STLAL)
STPO- BOM(Bill of Material)(Item)( STLTY,STLNR,STLKN,STPOZ)
STPU-- BOM Sub-Item (STLTY,STLNR,STLKN)
STPN-- BOM Follow-Up Control (STLTY,STLNR,MATNR)
STST-- Standard BOM Link (STOBJ,STLNR,STLAN,STLAL)
STZU- Permanent BOM data( STLTY,STLNR,STLAN,ALTST)
RKPF-- Document Header: Reservation(RSNUM,BWART,ANLN1,KOSTL)
RBKP-- Document Header: Invoice Receipt(BELNR,BLART,GJAHR,BUDAT)
RSEG-- Document Item: Incoming Invoice(BELNR,BUZEI,EBELN,MATNR)
Refer these links for more:
Functional flow of mm module.
Where can I ask for help for MM FUNCTIONAL Questions ?
<b>Reward points</b>
Regards
Message was edited by:
skk

Similar Messages

How do I get the Basic and camera calibration sub panels in the develop modual to come back after they go away on there own?

I was working on images and then when I picked a different image the basic and camera calibration sub panels disappeared. How do I get them back?

Right click on one of the other headers and a popup will appear and you can select the ones you need to view.

Do we need a Library and Develop Module?

Do we really need a Library and Develop module? There's lots of dissatisfaction with Lightroom speed and one of the problem areas is when switching from Library, when in standard preview or 1:1, to Develop and the 'loading' message appears or as on my mac the dreaded spinning beach ball goes crazy. Even with all the previews created it's still slow.
So, if we have a standard preview or 1:1 loaded why can't we automatically be ready to apply any adjustments and save an extra step to another module? The quick develop in the library seems unnecessary and I've never used it. That leaves the metadata and keywording panels requiring a new location, but again these are not something I need to refer to on a regular basis.
Anyone else any similar thoughts?

> ...but I'm pretty darn sure there won't be any back-stepping to REMOVE or substantially alter LR's basic premise...pretty sure Develop will always be about dealing with a single image adjustment (and applying that adjustment to other images if you wish).
And I'm okay with this premise, but it needs additional functionality, such as the ability to apply relative adjustments. It already has this via the keyboard shortcuts while hovering. It just needs a UI adjustment (I once did a mockup of this, and I think it works) and the ability for autosync to recognize them as relative adjustments to the other images.
It also needs additional views. Grid, survey and compare would be nice, but you're only adjusting a single image's RAW data rendering at a time - the others are shown as previews and adjustments to them are rendered that way (like Library does).
The issue is, many people like me end up switching modules far too often. I generally go back and forth between Library and Develop hundreds of times per day. That's way too many times to be suffering the module-switching penalty. I'd prefer to select the images I'm working on in Library, and never see that module again until I'm done working on them. For now, grid and survey are too often needed, and so are relative adjustments.
Develop already has most of the needed functionality. Relative adjustments are already available to one image, a grid is available but only at 1 row (film strip supplied by Library) and a quick-render (the image in the upper left) is available as well. This just needs to be expanded and adjusted so that going back and forth to Library isn't as necessary as it is now. Ideally, you'd import in Library, to your metadata stuff there or in other related modules, choose the image group you want to work on using filters/folders/collections/find, then go to Develop and work on them until you are done.

Should I learn database design and development skills?

Hi everyone,
I am a junior Oracle with 3 years experience. I have got Oracle 10g and 11g OCP certifications.
I know how to install, configure,monitor and maintain databases, but I don't know hot to design and develop databases.
I know that employers demand of us more and more. Database design and development skills are the basic requirements.
Should I start to learn database design courses?
If yes, please recommend me the books(or Oracle Docs) of Getting Started.
Thank you very much
Edited by: user8096439 on Feb 24, 2009 11:59 AM

user8096439 wrote:
Are the following books suitable for a getting started designer?
2 Day Developer Guide
2 Day Plus Application Express Developer's Guide
2 Day Plus Java Developer Guide
2 Day Plus .NET Developer Guide
2 Day Plus Locator Developer Guide
2 Day Plus PHP Developer GuideYou could do worse, but I think before you plunge into specific technologies (java, .NET, etc) I'd study up on basic data analysis and normalization.
Google "data normalization" and study up on 1st, 2d, and 3d Normal Form.
Go through the Oracle docs and get very familiar with the different data type (varchar, number, date, etc)
Read the Tom Kyte Books.
Programmers keep wanting to re-invent what the database already does, and treat the database as a data dump. As a result, I'd focus on analysis and design issues before approaching books on programming technology. (and I was an applications programmer/analyst for about 15 years before transitioning to DBA)

Design and develop an ANGULAR DISPLACEMENT measurement using an appropriate SENSOR

Hello everyone
in the beginning I am very grateful for this useful website and discussion and I have certain inquiries about
Design and develop an ANGULAR DISPLACEMENT measurement using an appropriate SENSOR using labview as controller and I don't have much knowledge about labview any basic ideas that help me I will be thankful for you
thank you very much
Attachments:
6. Assignment Question Paper (cover).pdf ‏27 KB

'4. Cases of plagiarism will be penalized'
If we do it all for you and you cut and paste the answers, isn't that plagiarism?
I think it's reasonable to come to the forums to ask some directed questions where you're stuck, but you
don't seem to have put any effort in so far.
First read the LabVIEW help and study some introductory LabVIEW courses. Only then will you have the skills to
approach the exam question.

Image appears different in Library and Develop modes?

I have an image that appears different depending on whether it is in the Library Module or the Develop Module. Only this one image does this. The develop module version is the one I want to work on in Photoshop. However, when I click on "Edit in Adobe Photoshop CS3" the resulting tiff that opens in PS has an appearance that matches that of the Library module version of the image. It makes no difference whether I click on "Edit in PS CS3" from the Library or Develop module, the tiff always matches the Library Module version of the raw file.
Any ideas what might be causing this?
Thanks.
J.

How are you calibrating your monitor? The only real difference between the Library and develop module is that the Library module shows a preview that is generally stored in the adobeRGB color space. The Develop module uses a color space based on prophotoRGB primaries and can encompass any color your camera can capture. It is possible that your green falls outside of adobeRGB and gets clipped in the library preview, while in the develop module it shows them. This is only possible to see if you have a wide gamut monitor, or when your calibration software generates a perceptual rendering intent. If you export and you do not use the prophotoRGB color space, you will loose these colors.

How do you Design and Develop?

How do you Design and Develop?
I know this varies based on alot of things such as knowledge, preference, purpose, resources, etc..but I am curious how different (level of expertise) designers actually prefer or implement their websites. I decided to do this post after two different forums discussions regarding 1.Templates and PHP and 2. Backend Development.
1. How do you generally approach a project?--Wireframe, Freehand (as it comes), PSD template, etc.--Do you have a specific 'methodology' or procedure?
2. What are 2-3 of your main resources / sites / applications etc that you use (and for what?)
Specifically: What do you use (and how) to get up a website? (I know again this depends on a variety of things, but in general..) *also if you would like to comment on your expertise or level maybe helpful.
Do you prefer (Pros/ Cons of:) What advice would you give regarding below?
Your own HTML/CSS/Script based site that you mostly (if not completley) built. (More control and original, but harder / tedious for beginner)
HTML Temlplate (tweak the HTML and CSS)--non framework type (Quick and easy, but usually poor quality, outdated?)--but some can servde as good starting point.
Wordpress (And others like Drupal, Joomla) (Somewhat quick and easy access to tweak a quality WP Theme with ability for alot of features--forms, search, databases, etc (otherwise might have trouble with advanced features w/o good working knowledge og PHP and MYSQL, maybe others?)--but kind of a 'workaround' for real HTML design?
Frameworks types like Foundation, Bootstrap, Skeleton
A combination or hybrid of methods? -- or another method I have overlooked?
Thanks very much for any insight you can offer, hopeully this will lead to a vibrant discussion.-

The websites I build are 95% PHP/MySQL. They are heavy on business logic. I sometimes work with designers, SEO "experts" and (rarely) other coders. I almost never work on the content of websites. The clients do that themselves through the CMS I build for them.
I write every line of code myself except for the use of jQuery and a few PHP code classes adapted from others. I can build a complex website in a matter of minutes by reusing the code libraries and patterns I have developed from previous projects.
I don't use a PHP framework because I have developed my own "pseudo-framework" for the particular kinds of sites I build, but I respect the frameworks that are out there. They can teach you excellent coding habits.
In starting the design and logic of a site, the most essential question is: What is the website (or website project) supposed to accomplish? My clients tell me what they want to accomplish, but I usually decide how to get there. This holds for both business logic and design, because design also must serve the business objectives.
My website projects generally take four months to two years to complete. The client usually dedicates one employee to work as a liaison between me and the rest of the company. Because the sites I build are heavy on the business logic, a great deal of time is spent on testing and debugging. I make testing the responsibility of the client so I can't be held liable if, for instance, a terrible accounting mistake is discovered in the code logic.
I like to use Adobe Illustrator for design development because I became an Adobe Illustrator ACE in 2000; however, I can see that Fireworks is probably the better tool. Photoshop is an important secondary tool.
For general site management and code writing I use both Dreamweaver and ZEND Studio; however, I use Dreamweaver less and less.
I now require all my clients to have their websites (and also domain name registrations, since my company is a domain name reseller) hosted on my VPS server. This prevents anyone from stealing code I have worked for years to develop and also establishes a commitment between myself and the client. When you are starting a web development business, you can't demand this kind of commitment from the client. Even a lot of great seasoned developers can't. It depends on your reputation within the specific industry(ies) you service.

Installing Oracle 8i and Developer 6.0 technet packages on NT

I recently purchased the Oracle 8i (8.1.6) and Developer 6.0 "packages" from technet ($200/each). The Oracle 8i Enterprise Server software installed without any problems [ Oracle home = ora81 ]. However, when I tried to install the Developer package [ to oradev ], I got a message indicating that the install would replace my "ora81" registry settings with the "oradev" settings... which it did, thereby rendering my database "in-operable".
After repeatedly removing and reinstalling the two packages, I was finally able to get both installed with an "operable" database. However, I keep getting a TNSNAMES error message when I try to connect to the database from Oracle Forms. Has anyone else encountered this scenario??? I am quite experienced in "using" Oracle tools and the database, but NOT when it comes to installing and configuring them...
At this point, I believe that my problem lies with SQL*Net... any ideas???
null

U-da-Man!
Thanks, Martin... your step-by-step process worked like a charm! Although, having used Oracle products for 7+ years, I am amazed that the Developer package had to be installed before the database. I wonder what will happen when I eventually install Developer 6i ??
Anyway, thanks again for the info!
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Martin Vonk ([email protected]):
Hi Dave,
Did not install Oracle 816 up to now. But still..
Developer 6 has to be installed in DEFAULT_HOME...
See the procedure below (source Oracle (modified)).
Installation Procedure
Follow this procedure to install Developer 6.0 and Oracle 8i on the same physical machine in separate ORACLE_HOMEs on NT:
1) Install Developer 6.0 using the instructions on the Developer CD.
Specify an appropriate drive and the ORANT directory as the destination. For example:
D:\ORANT
Note: You must install Developer in the Oracle home named DEFAULT_HOME.
2) Install RDBMS 8.1.5 from the Oracle 8i CD. Specify the following information when prompted for the Oracle Home and Full path:
Oracle Home ora8i
Full Path d:\orant\ora8i
Choose Typical Install
Global Database Name ora8i.us.oracle.com (This is an example)
SID ORA8I (This is an example)
As the product installs, a summary is displayed that shows the products that are installed and the space requirements.
When the installation is complete, the following information is displayed and the installer exits:
Oracle Database Configuration Assistant Alert Database Creation Completed.
Database Information
Global Database Name ora8i.us.oracle.com
SID ORA8I
Sys password change_on_install
System passwd manager
3) A TNSNAMES entry needs to be created in the tnsnames.ora file for the new Oracle 8i installation. You can find the file in:
d:\orant\net80\admin\tnsnames.ora
A default entry will look like this:
alias.world
(DESCRIPTION
(ADDRESS_LIST
(ADDRESS
(PROTOCOL = TCP)
(Host = )
(Port = )
(CONNECT_DATA = (SID = )
For example, if you installed on a machine with a HOSTNAME of TEST, a SID named ORA8I, on TCP/IP with port 1521, and an alias of NEW, you would create the following entry:
NEW.world
(DESCRIPTION
(ADDRESS_LIST
(ADDRESS
(PROTOCOL = TCP)
(Host = TEST)
(Port = 1521)
(CONNECT_DATA = (SID = ORA8I)
4) If you manually created the entry, save and close the tnsnames.ora file.
You can now connect to the local database instance of 8i using the DBSTRING as NEW. For example, you can connect as scott/tiger@NEW.
<HR></BLOCKQUOTE>
null

I thought I upgraded to Pro, but my account shows both Basic and Pro. How can I upgrade to Pro and cancel Basic without losing my forms?

I thought I upgraded to Pro, but my account shows both Basic and Pro. How can I upgrade to Pro and cancel Basic without losing my forms?

Hi Rochdr,
You can use the following article to help you address this issue with your mail account in OS X:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
Thanks for using the Apple Support Communities. Have a good one!
-Braden

How to test and develop the HTML/Backbone custom content viewer on IPad?

Hi
I have been tasked with developing and amending the HTML/Backbone custom content viewer as nicely detailed and explained by Derek Lu here:
https://www.adobe.com/devnet/digitalpublishingsuite/articles/html-default-library.html#
I can see that by removing the reference to libs/AdobeLibraryAPI.js in Index.html i am able to "test" on the desktop.

and that data is bought in via the fulfilment XML feed and the parse method is called on Librarycollection.
I have made the changes to hook up the viewer to bring in some folios that we are developing.
However, although this provides the ability to test and develop on the desktop in one form since we are using JS and Backbone, there are various checks within the provided code to see if ADOBE.isAPIAvailable.
If it is, then the behaviour is different than on the desktop, so once the viewer is packaged up and put on the IPad there is disparity between what you were able to check and test on the desktop version against what is shown on the IPad.
The question therefore is... is there a quick way to develop and test on the Ipad ... it doesnt seem like a viable option to develop blindly on the desktop and then package up the content viewer within Adobe DPS to check how those changes behave on the IPad?
To re-iterate the viewer is to make use of backbone / js example to provide greater functionality and options for customisation.
Thanks in anticipation.
Dave

Thankyou for taking the time to respond and for providing such detailed articles on adobe dps development, it is much appreciated.
I had completely missed that article and was struggling to find anything useful from googling!
Dave

Basic and scheduling dates & time calculation in process order creation

Hi guru's,
i have one requirement, i need to calculate and display the basic and scheduled dates & times based on the given input i.e material , plant , process order type , quantity , UOM and scheduling type ( for corresponding scheduling type user will provide either start date or finish date ) using RFC. can u plz provide any function module for this purpose or logic for calculating the same , as i am working on version 4.7ee .
Awaiting for a quick response.
Regards,
Madan

Dear Rohan,
1.Check the length of break timings defined in the resource that is assigned in the phase.
2.Check in OPUZ whether for the process order type and plant combination whether scheduling is to include the break time also
(whether the check box for scheduling with breaks) is included.
Check and revert back.
Regards
Mangalraj.S

Where is the built in Java runtime and development environment in my MAC???

I keep reading that my macintosh (dual G5 with OSX 10.4.10) came with a fully configured and ready-to-use Java runtime and development environment, however I cannot find, nor do I know how to open it. Doe anyone know how to open this up? thanks so much!

Your JRE should already be configured so that when you double-click a self-executing jar or open a page with an Applet it will run.
Your compiler (javac) should be available through your sheel in your terminal application.
If none of this helps you (and it may well not) you may want to consider installing an IDE. Eclipse for example has a Mac OS version, I am sure there are others but I do not develop on Mac so I can't tell you about them.
http://www.eclipse.org/downloads/download.php?file=/technology/epp/downloads/release/20071103/eclipse-java-europa-fall2-macosx-carbon.tar.gz

Is it possible to have English as the interface language, but use (and develope for) any other language/locale?

Before installing Firefox, I need to clarify the following:
The use of locales: I am a developer and my preferable language, for the interface, is English (though, it is not my mother tongue). But, I would like to be able to use any other language (including, the use of any dictionary) and develop for any language or locale. So, does the English version let me do the above mentioned?
Or, eg, do I need to install the Hebrew locale, if I want to use the Hebrew dictionary?
Or, is it possible to install different locales on the same computer (and for the same user, in Win XP)?

You can install any dictionary is every locale, so that shouldn't be a problem if you use the English locale.
If you want to check out the user interface or how the browser acts with an RTL locale like Hebrew then you need to install the language pack and switch to that locale.
You can install additional language packs in any Firefox version.
* http://kb.mozillazine.org/Language_packs
* Locale Switcher: https://addons.mozilla.org/firefox/addon/locale-switcher/
* http://releases.mozilla.org/pub/mozilla.org/firefox/releases/latest/win32/xpi/

Windows 10 Enterprise Edition: Installation and Development Environment Essentials: Thoughts & Assistance Req:

Hello,
I am in the architecture planning stage of my project and seeking personal and general good advice from Mircosoft engineers. I am laying the foundation stones of a new development product using at least three more new technologies that are
as new as Windows 10. Their are also around four or five technology partners with the latest version of their software that I wish to take onboard. Due to the sensitive nature of the project it is not wise for me to state each piece of technology used,
so I will be as accurate as possible using the limited means I have.
I wish to make a "closed" development environment, with the latest build (currently 9860), install the new software. Some of which installs fine, some of which is not compatabile with Windows 10. Regarding the latter I am in discussions with the
technology providers to make a work-around and hammer and chisel through every issue. Very soon I hope to have a fully stable working development environment which paves the road to a first prototype. So i need to make a decision soon to "lock
down" everything. I will miss Windows 10 updates but the advantage is when the project vertical slice is complete, the feedback and benefit will be larger for Windows 10 final product.
This is probably my fifth or sixth early evaluation of the Windows platform and I am aware of the highs and lows of working with various versions using new builds, from the stability of win98 (becoming 2000 - minus millennium 1999 edition), to the quick uninstall
of vista (it broke our internal projects). The solid bedrock of Windows NT (becoming XP) and so on. The good news is Windows 10 seems very good indeed.
My questions are two:
1) Would the windows team recommend a closed environment development in my situation, and are they aware of other developers doing it (is it wise from your end)? Is their a pool, can we communicate directly?
or
2) Would you recommend an open environment instead? Every install is updated, everything is all on-line and networked, this may lead to more breakages and sacrifice the finished product.
The problem with approach number 2 is that a particular technology may work with this build, but not the next one and vice versa. I will constantly be playing "bunny hop" trying to make it work.
The problem with using number 1 is that you can have a "false dawn" view of the project, meaning you have managed to get it stable and develop code that fits that environment and build, but as soon as you do update six months later, it breaks due
to feature change, it means massive re-work, ultimately breaking the product again.
I have seen these approaches drown larger projects and wash away whole development teams.
Its a tough one and a part of my R&D but very soon I need to make a decision.
To explain more, some of the technology used will be:
Windows 10 Enterprise - Perforce - Office 365 with Exchange Activ Synch - Any associated Intel CPU and GPU monitors.
In other words very stable and solid technology. Their is about an equal number of other techs that are not so stable but I am slowly getting to work under Windows 10.All feedback would be given to Microsoft, regardless of environment 1 or 2.
Any advice and help from the Microsoft Team is greatly appreciated.
Yours Kindly,
Asad

I recently went to an Enterprise Mobility Summit Microsoft was holding at one of their facilities, and they spoke a bit about the future of Windows 10 - and here's what I left with: Microsoft isn't really sure themselves what kind of updating scheme they're
going to be doing with Windows 10. They had some ideas, but they're looking for feedback from enterprises and engineers about their plan.
I don't think it was under an NDA, so I should have no problem discussing it: their idea was to have different tracks (based on the user) with different upgrade schedules based on what the administrator deems appropriate for that user. For instance,
a consumer would have their OS automatically updated as soon as the update was available. while enterprises could stagger their users to a more manageable 3-month or 6-month schedule. Microsoft wasn't sure how long to make this stagger schedule - talk
of a 1 year stagger were floated, but nothing concrete. Critical devices, like POS or ATMs, could be setup so they would never be upgraded, or only upgraded when the administrator specifically allows them to be upgraded.
For you personally, it sounds like a closed development environment is better, since you're testing critical business applications. Again, one never knows exactly what direction Microsoft will take, but with the amount of conversations and...
warnings that dropped by various people at this meeting, it's pretty safe to say that they'll be some sort of timed release schedule for enterprises that you can prepare for.
Hope that helps!

Library and Develop Module Photos Appear Different

I am using Lightroom 4.4 Dell Ultrasharp monitor is calibrated. I own and have been referring to Scott Kelby's Lightroom4 book for digital photographers. I recently took some photos of my daughters prom. She had on a beautiful reddish orange dress. I notice that the dress appears very red in the develop module, however, appears a bit more orange in the library module. The change is very noticeable between the modules. The dress also appears similar to the library module view (a bit more orange) when viewed on the web via Flickr utilizing Chrome, Firefox, or IPad. It also appears the same when exported to a JPEG file.
I have done some experimenting and have determined that this color change effect appears to be very noticeable utilizing the Adobe Standard Camera Calibration Profile. It does not happen (at least to a noticeable extent) with the others such as Camera Standard where the dress appears a bit more orange in both the library and develop module. I do, however, like the appearance of the Adobe Standard profile better and this happens to be the default profile as well.
I have also noticed that the dress looks more orange when Soft Proofing is enabled. The change happens immediately when the check box is enabled. Checking the box makes the photo appear similar to the Library module view. Enabling Soft Proofing does make noticeable that there is Destination Gamut Warning which mainly involves the dress which is the point of interest, however, there is no warning with the Monitor Gamut Warning. I am intending to place the photos on the web at this time via Flickr. I will be printing several later so will be worrying about the printer gamut at that time. But for now, I would like to get the photos on the web looking as intended.
Having the photos look so different in the Library and Develop Modules is very frustrating. I am hoping that there is a simple setting or fix for this problem that I am experiencing. Your assistance will be greatly appreciated. Thank you.
-Mark

Hi Victoria. Thanks for your reply. Re the saturation of the yellows, an example of a photo which shows the behaviour is that of a sunflower shot in direct sunlight. So a typical bright yellow. The raw files are from a D7000, so I have several "camera" profiles to choose from in LR4, in addition to the default Adobe Standard. None of the camera profiles show a difference between Library & Develop. Also, the Adobe Standard profile only shows the described behaviour when yellows are present. I can find plenty of examples where the photos are identical between the two modules when there are no yellows in the shot. I doubt this is a monitor profiling problem, given that it affects just the Adobe Standard profile, however I will try re-profiling. My U2412M display is not wide gamut. I posted here because the issue I am seeing sounds very similar to the original poster's. We're both using Dell Ultrasharp displays, although that could be a coincidence. I'll see if I can get some screen grabs from my Mac and upload here later today. I'm on my Windows 7 laptop at the moment.
R
Update:
I have a pair of screen grab JPEGs from the Mac which I'm happy to share, however the upload here in the forum is limited in size. Any suggestions how I can best share the full size JPEGs?
Re-profiling hasn't changed anything. I'm pretty sure my profile is good. Ambient natural lighting, monitor warmed up, etc. Native white point used as always. The difference between profiled and unprofiled is very subtle. The U2412M appears to be pretty accurate at factory settings.
If I turn soft proofing on in Develop I see the less saturated image which matches Library. Turning it off again and the differences return.
LR4 on my Windows 7 laptop doesn't have the same problem. The screen on that is calibrated with the same Spyder3, however the laptop's screen is of a mediocre quality compared to the U2412M.
Found another thread where the poster is having the same problems with yellows, this time in LR5.
http://forums.adobe.com/thread/1265004

MM basics and development

Similar Messages

Maybe you are looking for