MM-SUS contract table

Hi ,
I have created a contract in R/3 and i am not sure which table it gets stored in SRM...In R/3 it stores in EKKO table but where does it store in SRM i mean table name.
Regards
Sameer

Mohammad,
CRMD_ORDERADM_H and CRMD_ORDERADM_H tables stores the Header and Item level information of SRM Application Documents. Object TYpe will differentiate the same for Contracts.
For other data in the Contracts like Account Assignment, BE Document etc, Go to BBP_PD transaction , open any document in that transaction , go to various sections at header and item level and all the details of the Contract will be displayed in various sections for different Contracts.
I hope that solves your purpose
Regards
Virender Singh

Similar Messages

How to know an order number from the service contracts table

Hi all,
I want to know how the order entry module and service contracts module are connected. I mean to ask if a service is placed as an order for purchase how do i get the information about the order_id or order_number from the service contracts table.
please point me in a direction so as to which tables i should be lookling at.
Thanks.

Try OKC_K_REL_OBJS table. The column JTOT_OBJECT1_CODE contains values 'OKX_ORDERHEADER' or 'OKX_ORDERLINE' and the column RTY_CODE = 'CONTRACTSERVICEORDER'. The column OBJECT1_ID1 should store order HEADER_ID or LINE_ID based on JTOT_OBJECT1_CODE value. Hope this helps.

Initial download of Z contract table from R/3 to CRM

Hi,
We have two contract tables called ZCONTRACTHEAD and ZCONTRACTITEM in our R/3 system which we bring to our CRM system to the same respective tables.
We use a downloadable object ZZCONN_HEAD and ZZCONN_ITEM in transaction r3ac1 and do an initial download using r3as.
My problem is that in CRD client 200 which is mapped to R/3 client 200, this download does not bring any data into CRM. The download says complete but I get a BDOC error in SMW01 saying validation error.
This download works perfectly fine in CRD client 100 which is mapped to R/3 client 600.
I know that this is custom table and not a SAP standard table. But I really don't understand why this would work in one client and not in the other client. I have checked the RFC destinations and also did some other initial downloads on CRD 200 which works fine except for this particular table.
Could you please give me your opinion on how can I debug this and find where is the problem? After doing few debugging myself I found out that I am getting the validation error in BDOC in CRD client 200 is because the intitial download is not bringing any record from R/3.
Due to this problem our contract pricing is not working on our DEV system and I am not able to do any further tests or enhancements.
Any suggestion or insight on this will be very helpful.
Thanks,
Prasoon

Hi Michael,
Thanks for your reply. I tried to debug the initial trasfer from CRM to R/3 but I am not able to debug the function in R/3. Also when I do a Test Function module in R/3 I am not sure as what correct parameter to put. I did refer few OSS notes 656823and 573857 but was not able to debug it in R/3. We are on CRM 3.0 Service Pack 14. Could you please suggest as to how can I debug this initial download ?
Since this initial load works perfectly fine in the other client(100) and not in in client 200, I am not sure what could be the problem.
Any suggestions will be appreciated.
Thanks,
Prasoon

BSP error when clicking on line item in SUS :Buffer table not up to date

Hi Experts,
I'm having a problem in SUS Portal. When i click on a line item of a PO to display the actual line item or see more details, i get a buffer table out of date error. I saw a thread with a similar issue where it says problem resolved but haven't had any luck getting a response from the poster, so I'm putting this question out there to everyone.
Related Post
Buffer table not up to date in SUS
More details on error...
Exception Class CX_BBP_PD_ABORT
Error Name
Program SAPLBBP_PDH
Include LBBP_PDHU08
Line 81
Long text Buffer table not up-to-date {}
Regards,
JD
Edited by: julian.k. drummond on Apr 13, 2010 6:46 PM

Hi Julian,
Please give the system some time and try again. It should work.
Thanks
Hari

SUS PO tables

Hello,
I have an inbound proxy from R/3 that sends POs and PO changes to SUS. EKPO does not appear to exist on the SUS side. I'd like to see the tables that SUS uses to store PO information. Can anyone direct me to these tables?
Thanks,
Matt

Goto BBP_PD, BUS2230 for PO.
There you can find the table name for PO(Header and item level)
ADR10 Printer (Business Address Services)
ADR11 SSF (Business Address Services)
ADR12 FTP and URL (Business Address Services)
ADR13 Pager (Business Address Services)
ADR2 Telephone Numbers (Business Address Services)
ADR3 Fax Numbers (Business Address Services)
ADR4 Teletex Numbers (Business Address Services)
ADR5 Telex Numbers (Business Address Services)
ADR6 E-Mail Addresses (Business Address Services)
ADR7 Remote Mail Addresses (SAP - SAP - Communication; BAS)
ADR8 X.400 Numbers (Business Address Services)
ADR9 RFC Destinations (Business Address Services)
ADRCOMC Comm. Data Serial Number Counter (Business Address Services)
ADRCT Address Texts (Business Address Services)
ADRG Assignment of Addresses to Other Address Groups (BAS)
ADRGP Assignment of Persons to Further Person Groups (BAS)
ADRT Communication Data Text (Business Address Services)
ADRU Table for Communication Usages
ADRV Address Where-Used List (Business Address Services)
ADRVP Person Where-Used List (Business Address Services)
BBP_PDACC Account Assignment
BBP_PDATT Document Attachment
BBP_PDBEH Backend Specific Header Data
BBP_PDBEI Backend Specific Item Data
BBP_PDBGP Partner Extension Gen. Purchasing Data
BBP_PDBINREL Transaction Object Linkage (EBP)
BBP_PDCON Purchase Order Item Confirmation
BBP_PDHAD_V Business Transaction Versions
BBP_PDHCF Set for Tabular Customer and Solution Fields on Hdr
BBP_PDHGP Business Transaction Purchasing Information
BBP_PDHSC Header Extension for Customer Fields
BBP_PDHSS Hdr Extension for SAP Internal Enhancements (IBUs and so on)
BBP_PDIAD_V Business transaction item
BBP_PDICF Set for Tabluar Customer and Solution Fields on Itm
BBP_PDIGP Business Transaction Item-Purchasing Information
BBP_PDISC Item Extension for Customer Fields
BBP_PDISS Item Ext. for SAP Internal Enhancements (IBUs and so on)
BBP_PDLIM Value Limit
BBP_PDLINK_V Transaction - Set - Link
BBP_PDORG Purchasing Organizational Unit
BBP_PDPSET Further Procurement Information
BBP_PDTAX Tax
BBP_PDTOL Tolerances
CDCLS Cluster structure for change documents
CDHDR Change document header
CDPOS_STR Additional Change Document - Table for STRINGs
CDPOS_UID Additional Table for Inclusion of TABKEY>70 Characters
CRMD_LINK Transaction - Set - Link
CRMD_ORDERADM_HBusiness Transaction
CRMD_ORDERADM_IBusiness Transaction Item
CRMD_PARTNER Partners
CRM_JCDO Change Documents for Status Object (Table JSTO)
CRM_JCDS Change Documents for System/User Statuses (Table JEST)
CRM_JEST Individual Object Status
CRM_JSTO Status Object Information
SROBLROLB Persistent Roles of BOR Objects
SROBLROLC Persistent Roles of Business Classes
SRRELROLES Object Relationship Service: Roles
STXB SAPscript: Texts in non-SAPscript format
STXH STXD SAPscript text file header
STXL STXD SAPscript text file lines
TOA01 Link table 1
TOA02 Link table 2
TOA03 Link table 3
TOAHR Container table for HR administration level
TCURR- Exchange table
Regards,
Manu

Match revenue recognised(Unbilled) & Invoice raised-for a contract-Table

Hi
In case of ubilled amount posted for a contrat and then the invoice being raised,the unbilled amount i.e revenue recognition is stored in VBREVE table and the invoice is identified against the contract number in VBREVR or VBRP.Is there any field or table where we can find that the for the revenue recognised ,the specific invoice number is raised .

Can any one pls reply on this.

MM-SUS CONTRACT

Hi,
I am changing the contract with the new message output type and retrigger the idoc. The problem is the contract is not getting replicated to SRM System.
Please let me know how to find the error in this case(We are connecting to a PI system between R/3 and SRM)
Regards
sam

hi sam
explain in detail
what type of contract ? what changes you did in the contract ? what you expect in the backend ERP system.
Muthuraman

Ip Contract table full

Hi all
We are facing below error
*"Print k 411 message suppress"*
*"ip_contract:table full,dropping packet"*
how to resolve this and what is the main cause of this issue..any idea please

Bashir,
Try to avoid using function in the where block. If functions are used then normal indexes are not used .. (nvl for pcak.segment4 and pcak.segment5)
If you "have" to use nvl function, then create function-based index for pcak.segment4 and pcak.segment5
As for hrou.name, there must be an index for this. And thats why when you give hrou.name ='xyz', query must be using one of the index that has this column.
Sudhanshu Bhandari
perotsystems TSI

How to export some data from the tables of an owner with integrity?

Hi to all,
How to export some data from the tables of an owner with integrity?
I want to bring some data from all tables in a single owner of the production database for development environment.
My initial requirements are: seeking information on company code (emp), contract status (status) and / or effective date of contract settlement (dt_liq_efetiva) - a small amount of data to developers.
These three fields are present in the main system table (the table of contracts). Then I thought about ...
- create a temporary table from the query results table to contract;
- and then use this temporary table as a reference to fetch the data in other tables of the owner while maintaining integrity. But how? I have not found the answer, because: what to do when not there is the possibility of a join between the contract and any other table?
I am considering the possibility of consulting the names of tables, foreign keys and columns above, and create dynamic SQL. Conceptually, something like:
select r.constraint_name "FK name",
r.table_name "FK table",
r.column_name "FK column",
up.constraint_name "Referencing name",
up.table_name "Referencing table",
up.column_name "Referencing column"
from all_cons_columns up
join all_cons_columns r
using (owner, position), (select r.owner,
r.constraint_name fk,
r.table_name table_fk,
r.r_constraint_name r,
up.table_name table_r
from all_constraints up, all_constraints r
where r.r_owner = up.owner
and r.r_constraint_name = up.constraint_name
and up.constraint_type in ('P', 'U')
and r.constraint_type = 'R'
and r.owner = 'OWNERNAME') aux
where r.constraint_name = aux.fk
and r.table_name = aux.table_fk
and up.constraint_name = aux.r
and up.table_name = aux.table_r;
-- + Dynamic SQL
If anyone has any suggestions and / or reuse code to me thank you very much!
After resolving this standoff intend to mount the inserts in utl_file by a table and create another program to read and play in the development environment.
Thinking...
Let's Share!
My thanks in advance,
Philips

Thanks, Peter.
Well, I am working with release 9.2.0.8.0. But the planning is migrate to 10g this year. So my questions are:
With Data Pump can export data just from tables owned for me (SCHEMAS = MYOWNER) parameterizing the volume of data (SAMPLE) and filters to table (QUERY), right? But parameterizing a contract table QUERY = "WHERE status NOT IN (2,6) ORDER BY contract ":
1º- the Data Pump automatically searches for related data in other tables in the owner? ex. parcel table has X records related (fk) with Y contracts not in (2,6): X * SAMPLE records will be randomly exported?
2º- for the tables without relation (fk) and which are within the owner (MYOWNER) the data is exported only based on the parameter SAMPLE?
Once again, thank you,
Philips
Reading Oracle Docs...

Best way to implement oracle TEXT on multiple tables with regular updates

Hi,
I have the following situation:
5 tables where we want full text search on multiple columns.
Some of the tables have a master/detail relation. (1 to 1000, or more)
because of the number of transactions on these tables we can't have a lag in the sync time.
Currently I have create a dummy table just for the search with 2 columns: for the primary key to all the other tables and one for the update trigger.
I use the user_datastore with a procedure to join all the necessary columns resulting in a clob.
My question is regarding the update.
Of course I can create triggers to update the dummy field in the search table, but this will give lot of updates on that table with possible locking issues.
What would be the best approach to have this search functionality working?
I am open for any ideas!
Thanks,
Edward

Ok, I will focus on building a solution on 12c.
right now I have used a USER_DATASTORE with a procedure to glue all the field together in one document.
This works fine for the search.
I have created a dummy table on which the index is created and also has an extra field which contains the key related to all the tables.
So, I have the following tables:
dummy_search
contracts
contract_ref
person_data
nac_data
and some other tables...
the current design is:
the index is on dummy_search.
When we update contracts table a trigger will update dummy_search.
same configuration for the other tables.
Now we see locking issues when having a lot of updates on these tables as the same time.
What is you advice for this situation?
Thanks,
Edward

BAPI_SALESORDER_CREATEFROMDAT2 with reference to contract

Hello ,
i have problems with the FM 'BAPI_SALESORDER_CREATEFROMDAT2' when i refer to a contract.
This contract contains a material set .
When i create the order, the subpositions will not be added automatically like it would when i create the order manually via va01.
So my resulting order will only contain the header position of the set.
Does anybody have an idea what to do?
thanks in advance
Werner

Hello Venkat,
As I know, the BAPIs did not consider data from the previous documents, like you explained, the contracts. You should select the information from the Contract tables and then you should map them into the corresponding fields of this function module.
I hope it helps you.
Regards,
Daniel

URGETNT: REGARDING Purchase Requsition Approval tables

hi,
I am making a report on purchase requsition and i have to display the details of which person has approved it and its date of approval. can anybody tell me which are the tables used in it to display it,example :-
1st Approval - Name of d person      Date of Approval
2nd Approval - Name of d person     Date of Approval
3rd Approval - Name of d person     Date of Approval
Final Approval - Name of d person    Date of Approval
this type of details i want to display in my report. if anybody gives me tables and details about it to make d <b><b>report ,he or she will be definately REWARDED...
Currently i am using table <b>EBAN,EBKN</b> ..
Regards,
Ric.s

Use these table to see who released and description
T16FC - Release code for particular release group
T16FD - Description for Release code
T16FG - Release Groups
T16FH - Descriptions of Release Groups
T16FK - Release Statuses
use BAPI to get release information for PR .
BAPI_REQUISITION_GETRELINFO.
reward points if useful.
Regards,
Vimal
Message was edited by:
        Vimal Kumar

ODI 10g - session keep a table locked

Hi,
We have a random issue, with ODI session that keep a lock on a table, even replication is finished and session becomes inactive
It generated dead locks as a trigger has to update the target table.
what happened :
- user application create rows (13)
- ODI scenario replicate the rows (contract table)
- 2nd scenario based on same source with another sunscriber run a stored procedure to create records in another table (around 30, positions table)
this 2nd locked the target table, and when the run of the procedure finished, and commited, the lock was not released
- ODI replicate another table (price) 30mn later, a trigger on target update position table with new values
---> trigger failed with deadlock (ora 60)
---> ODI failed as the trigger raised back the error
this issue happened after 10 hours of same activity without issue, chained lot of time, but suddenly the lock become persistent (more than 4 hours)
what can I do?
use ODI 10g 10.1.3.5.0 - RDBMS 10.2.0.4

Hi !
For small tables wich are mostly accessed with full table scan you can use
ALTER TABLE <table_name> STORAGE (BUFFER_POOL KEEP);KEEP pool should be properly sized , setting will cause once the table is read oracle will avoid flushing it out from pool.
T

MM-SRV-SUS: Setting for Service Procurement SRM7.0 ECC 6.0 Ehp4

Hello,
I have to implemente the service procurement scenario between MM and SUS.
Can you explain me what are the main settings that I have to make in order to implement the service procurement scenario ?
It'is very irgent.
Please help me.
Good work,
Michele

Hi
Follow all the steps given in SRM 4.0 config gidue(plan driven procurement) to set up, make sure all the PI configuration is done.
Following use PI path for replciating the documents from ECC to SUS and vice versa: PO and Service confiramtion rest of them are still on IDOC.
To enable replication of PO and service confiramtion follwoing workflow need to enabled in SWETYPV:
BO BOR object type BUS2012(PO) CHANGED WS3800008
BO BOR object type BUS2012(PO) CREATED WS3800008
Limitation is only free limit PO are replicated to SUS, contract limit and Overall limit is not supported.
with regards
Manjunath

Reg:Tables for Workflow

Hi All,
My requirement is as follows...
I need to create one new program based on contract number when I executed that program it should show the status of approval where itu2019s pending whether rejected or approved and comment of approved / rejected . If he regenerated same contract we have to pick current status with comments and old status with comments.
Workflow is full developed from Scratch.I can say it is zworkflow.
This is very urgent plz help me.

OK, with function SAP_WAPI_WORKITEMS_TO_OBJECT and BUS2032 you can get the work items that are connected to the contract. That is the first step. Now you have the work items.
Now you can read the container values of the work items with SAP_WAPI_READ_CONTAINER.
The status of the contract you will hopefully get from the contract table (if the contracts have this kind of information). If not, then you probably need to read it from the container.
Just take a look into a technical workflow log of one contract workflow instance and check the container values there. Then play around with SAP_WAPI_READ_CONTAINER in SE37 and see what it returns. You should get pretty good idea how the function work. Also check other SAP_WAPI* functions - there are plenty of useful stuff.
It is impossible to give detailed instructions since we don't see your custom workflow and you don't provide too much information.
Regards,
Karri

MM-SUS contract table

Similar Messages

Maybe you are looking for