MM17 Maximun number of records

Dear All,
Can you please advise if you encountered any problem with a maximun number of records using through MM17. We are planning to use MM17 for a high number of material mastre records. Management has a concern that this will have an impact on the system performance
Thanks a lot

Of course effect mass updates the system performance.
But what you have to do is a well needed otherwise the business is effected in a negative matter.
Take care about the performance in jobs that ocur many times a day
You can execute the changes in MM17 in background, this has not the big negative effect as a online execution has.
How many materials do you have to update, I certainly used MM17 to update some 10000s.
alternative you can use RMDATIND direct input to change the records, direct inputs are much quicker.

Similar Messages

How to find the number of records per months in cube

Hi,
how to find the number of records per months for my all cubes?
Can i use the ListCube transaction to find totl number f records per cube monthwise ?
Jimmy

Hi,
Here is a program to generate no of records and list of ODS and Cubes in Active version.Schedule this program in background and create a cube to load this information and schedule to the data from the file generated by the program. Schedule this all per you requirement.
1.Copy the code into your Z<programname> from Se38.
2.change the FILENAME in CALL FUNCTION 'GUI_DOWNLOAD' in the program to the location from where you can pick the information to load data to cube(eg Application server).
3.Save program.
4.Schedule the program in background as required
5.Create cube with infoobjects to hold no of records and Infoprovider name
6.Load this cube based on event after the program job is done.
Hence you can report on this cube to see no of records in CUBE or ODS in your box.
Please find the code below.
Cheers,
Kavitha Kamesh.
types: begin of itabs ,
      tabname type dd02l-tabname,
      end of itabs.
data: itab type itabs occurs 0 with header line.
data: counter type i.
data: begin of itab1 occurs 0,
tabname type dd02l-tabname,
counter type i,
end of itab1.
DATA: ITABTABNAME TYPE STRING.
DATA: LENGTH TYPE I.
DATA: OBJECT(30).
data: str(6) type c.
select tabname from dd02l into table itab where ( tabname LIKE '/BIC/F%' or tabname LIKE '/BIC/A%00' )
and TABCLASS = 'TRANSP' and AS4LOCAL = 'A'.
loop at itab.
select count(*) from (itab-tabname) into counter.
str = itab-tabname.
if str = '/BIC/F'.
LENGTH = STRLEN( ITAB-TABNAME ).
SHIFT itab-tabname BY 6 PLACES LEFT.
ELSEIf str = '/BIC/A'.
SHIFT itab-tabname BY 6 PLACES LEFT.
LENGTH = STRLEN( ITAB-TABNAME ).
LENGTH = LENGTH - 2.
endif.
itab1-tabname = itab-tabname(LENGTH).
append itab1.
itab1-counter = counter.
clear itab-tabname.
clear: COUNTER.
endloop.
*********** itab1
loop at itab1.
write:/ itab1-tabname, itab1-counter.
endloop.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
*   BIN_FILESIZE                    =
    FILENAME                        = 'c:records.xls'
    FILETYPE                        = 'ASC'
*   APPEND                          = ' '
    WRITE_FIELD_SEPARATOR           = ','
*   HEADER                          = '00'
*   TRUNC_TRAILING_BLANKS           = ' '
*   WRITE_LF                        = 'X'
*   COL_SELECT                      = ' '
*   COL_SELECT_MASK                 = ' '
*   DAT_MODE                        = ' '
*   CONFIRM_OVERWRITE               = ' '
*   NO_AUTH_CHECK                   = ' '
*   CODEPAGE                        = ' '
*   IGNORE_CERR                     = ABAP_TRUE
*   REPLACEMENT                     = '#'
*   WRITE_BOM                       = ' '
*   TRUNC_TRAILING_BLANKS_EOL       = 'X'
*   WK1_N_FORMAT                    = ' '
*   WK1_N_SIZE                      = ' '
*   WK1_T_FORMAT                    = ' '
*   WK1_T_SIZE                      = ' '
* IMPORTING
*   FILELENGTH                      =
TABLES
    DATA_TAB                        = itab1
*   FIELDNAMES                      =
* EXCEPTIONS
*   FILE_WRITE_ERROR                = 1
*   NO_BATCH                        = 2
*   GUI_REFUSE_FILETRANSFER         = 3
*   INVALID_TYPE                    = 4
*   NO_AUTHORITY                    = 5
*   UNKNOWN_ERROR                   = 6
*   HEADER_NOT_ALLOWED              = 7
*   SEPARATOR_NOT_ALLOWED           = 8
*   FILESIZE_NOT_ALLOWED            = 9
*   HEADER_TOO_LONG                 = 10
*   DP_ERROR_CREATE                 = 11
*   DP_ERROR_SEND                   = 12
*   DP_ERROR_WRITE                  = 13
*   UNKNOWN_DP_ERROR                = 14
*   ACCESS_DENIED                   = 15
*   DP_OUT_OF_MEMORY                = 16
*   DISK_FULL                       = 17
*   DP_TIMEOUT                      = 18
*   FILE_NOT_FOUND                  = 19
*   DATAPROVIDER_EXCEPTION          = 20
*   CONTROL_FLUSH_ERROR             = 21
*   OTHERS                          = 22
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

How to find the number of records in ods?

how to find the number of records in ods?
Pls suggest the solution apart going to the table of ods and seeing the number of records.
Is there any program or function module to see the number of records in ods?
For eg: SAP_INFOCUBE_DESIGNS is a program which gives the detail (number of records) of infocube.

Hi,
I was looking at this and found the following tables that may be of help.
One of these tables will include a summary of the record count of all the tables in your system based on the last time each table had it's database statistics calculated:
DBSTATTADA
DBSTATTDB2
DBSTATTDB4
DBSTATTDB6
DBSTATTINF
DBSTATTMSS
DBSTATTORA
We run on an Oracle database so the table record counts can be taken from DBSTATTORA. Type in AZ in table selection field in SE16 to restrict the output to ODS (or DSO) tables only.
The record count is at the time indicated in the timestamp field. Obviously this is not real time but should not be too out of date - if it is you may be having performance issues and should get your DBA / Basis to run a full refresh of DB stats.
Hope this helps, alhtough not real time the table should give you a decent indication of the size of all your ODS objects (or any other table for that matter!)

Which system field returns the number of records returned after a select?

Which system field returns the number of records returned after a select?
a) sy-index
b) sy-recno
c) sy-lncnt
d) sy-dbcnt
e) sy-tabix

Hi,
SY-DBCNT
Regards,
Prashant

SQL help: return number of records for each day of last month.

Hi: I have records in the database with a field in the table which contains the Unix epoch time for each record. Letz say the Table name is ED and the field utime contains the Unix epoch time.
Is there a way to get a count of number of records for each day of the last one month? Essentially I want a query which returns a list of count (number of records for each day) with the utime field containing the Unix epoch time. If a particular day does not have any records I want the query to return 0 for that day. I have no clue where to start. Would I need another table which has the list of days?
Thanks
Ray

Peter: thanks. That helps but not completely.
When I run the query to include only records for July using a statement such as following
============
SELECT /*+ FIRST_ROWS */ COUNT(ED.UTIMESTAMP), TO_CHAR((TO_DATE('01/01/1970','MM/DD/YYYY') + (ED.UTIMESTAMP/86400)), 'MM/DD') AS DATA
FROM EVENT_DATA ED
WHERE AGENT_ID = 160
AND (TO_CHAR((TO_DATE('01/01/1970','MM/DD/YYYY')+(ED.UTIMESTAMP/86400)), 'MM/YYYY') = TO_CHAR(SYSDATE-15, 'MM/YYYY'))
GROUP BY TO_CHAR((TO_DATE('01/01/1970','MM/DD/YYYY') + (ED.UTIMESTAMP/86400)), 'MM/DD')
ORDER BY TO_CHAR((TO_DATE('01/01/1970','MM/DD/YYYY') + (ED.UTIMESTAMP/86400)), 'MM/DD');
=============
I get the following
COUNT(ED.UTIMESTAMP) DATA
1 07/20
1 07/21
1 07/24
2 07/25
2 07/27
2 07/28
2 07/29
1 07/30
2 07/31
Some dates donot have any records and so no output. Is there a way to show the missing dates with a COUNT value = 0?
Thanks
Ray

Hw to find total number of records

Hi All,
Can anyone help from these
1. how to find total number of reports for a particular cube/ods... need step - step solution
2. how to find total number of records for a particular Cube and ODS and Aggr's to till date.
3.what is sandbox,mirror sys,instance of a sys..?
4.what r TWS(Tivoli Workload Scheduler) jobs? how these r different to standard schedulers?
Thanks in ADv
Linda

Hello Linda,
As you have lots of answers on first 2 so i'll start from 3rd onward.
3. Sandbox is mostly practice system where you can do all kind of R&D, mirror sys can be mirror image of any system depends on the organization and instance of system is again mirror image of one system.
4. TWS is third party tool for scheduling which doesn't come along with SAP like standard scheduler as TWS has been prepared specially for this purpose so it has some more features than standard.
Hope it helps.
San.

How to find total number of records in a BDoc?

Dear all,
I have replicated about BP 1088 records from ISU into CRM system with block size 100. Technically on SMW01, for each successfully processed BDoc, there will be 100 records (corresponds to 100 block size). But due to some failed BDocs, not all "successfully" BDocs will have 100 records each, some may have only 1 record inside...or 30...or 88 for example. So, may i know how to find or is there a report i can look into to find the total number of records clearly shown for each of the successfully processed green status BDocs???
Please help and points will be rewards!!
Thank You
Best Regards,
CK

I am just showing this to show how to get the rowcount along with the cursor, if the program has so much gap of between verifying the count(*) and opening the cursor.
Justin actually covered this, he said, oracle has to spend some resources to build this functionality. As it is not most often required, it does not makes much sence to see it as a built-in feature. However, if we must see the rowcount when we open the cursor, here is a way, but it is little bit expensive.
SQL> create table emp_crap as select * from emp where 1 = 2;
Table created.
SQL> declare
2   v_cnt     number := 0;
3   zero_rows         exception;
4 begin
5    for rec in (select * from (select rownum rn, e.ename from emp_crap e) order by 1 desc)
6     loop
7        if v_cnt = 0 then
8           v_cnt := rec.rn;
9        end if;
10     end loop;
11     if v_cnt = 0 then
12        raise zero_rows;
13     end if;
14   exception
15    when zero_rows then
16      dbms_output.put_line('No rows');
17   end;
18 /
No rows
PL/SQL procedure successfully completed.
-- Now, let us use the table, which has the data
SQL> declare
2   v_cnt     number := 0;
3   zero_rows         exception;
4 begin
5    for rec in (select * from
6          (select rownum rn, e.ename from emp e)
7          order by 1 desc)
8     loop
9        if v_cnt = 0 then
10           v_cnt := rec.rn;
11           dbms_output.put_line(v_cnt);
12        end if;
13     end loop;
14     if v_cnt = 0 then
15        raise zero_rows;
16     end if;
17   exception
18    when zero_rows then
19      dbms_output.put_line('No rows');
20   end;
21 /
14
PL/SQL procedure successfully completed.Thx,
Sri

How to limit the number of records in WebI Report

Hi,
I have a requirement where I need to display the WebI Report data only if the number if record is less than 65k.
Incase if the records are more than 65k then the report should be blank and a text message needs to be displayed.
The client dont want to set the number of records either in universe or at the edit query at the report. They want to limit once the report is executed.
Please let me know if its possible to do it at the report level.
Thanks in advance!!
Best Regards
SAP BO

Optional prompts are not a problem.
Assuming you first query uses the following SQL statement
select a,b,c from t where x=y and z=@prompt(...)
The query for checking the number of rows should use the following SQL code
select count(*) from t where x=y and z=@prompt(...)
The original query should be modified as follows
select a,b,c from t where x=y and z=@prompt(...) AND (select count(*) from t where x=y and z=@prompt(...)) < 65000
Regards,
Stratos

CLIENT_TEXT_IO - Hanging on "PUT" for large number of records

I have successfully used CLIENT_TEXT_IO but my users have run into an error where the Form hangs and spits out details such:
"oracle.forms.net.HTTPNStream.doFlush"
etc....
This happens when the number of records in the datablock is high (ex: 70,000 recs). So my question is: Is there a limit on how many lines you can write to a file?
I'm just creating a CSV file on the client's machine using CLIENT_TEXT_IO.PUT_LINE. It works fine on say a few thousand recs but after that it hangs.
I'm on Oracle Application Server 10g, Release 9.0.4 on Windows Server 2003, and forms compiled using Oracle Developer Suite 9.0.4.
Thanks,
Gio

Hello,
When playing with huge data, it is better to generate the file on the A.S. then get it back to the client.
<p>Read this article</p>
Francois

Add number of records to a field

I need to load data in BW ODS from flat file and want to populate one field ROWID which will hold record numbers starting from 1 if ODS is empty. This ROWID in ODS is used as Key field. I want to populate this ROWID based on number of records in flat file.
If there are already records in ODS and say last record number is 10, next record number will be 11 and will populate rests one by one.
So first I want to read ODS table if there are any records. If empty, ROWID will be populating from record 1 and if not empty, get the last ROWID and populate from next number.
Help me with the code please?

Hi,
If the select count (*) is successfull then add 1 to the count then move it to the rowid column.
SELECT COUNT(*) INTO V_COUNT FROM TABLENAME.
IF SY-SUBRC NE 0.
* If no records found then set the counter to 1.
v_count = 1.
ELSE.
* If the record is found then set the row id of the table by adding 1.
TABLENAME-ROWID = V_COUNT + 1.
ENDIF.
**If you want to insert multiple records within a loop.
LOOP AT ITAB.
* Increment the counter.
V_COUNT = V_COUNT + 1.
* Set the row id.
TABLENAME-ROWID = V_COUNT.
ENDLOOP.
Hope this helps.
Thanks
Naren

How to calculate the number of records in Multiprovider

Hi Experts
I have created a report based on the multiprovider (Consist of Cube and ODS)
I need count the number of records inside the multiprovider, how can i do it in the reporting level
Regards
Santosh

Hi,
You can use calculated key figure with replacement path variable.
Follow This:
1) From the context menu of the Key Figure directory, choose New Calculated Key Figure.
2) From the context menu for the Formula Variable, choose New Variable.
3) Choose the Processing type as Replacement Path.
4) In the next screen, select the Characteristic Info Object based on which the number of documents is to be displayed in the report (For example: Document Number / Order Number).
5) Choose Next.
In the Replace Variable with drop down box, choose Attribute Value.
In the Attribute drop down, select Characteristic Reference (Constant 1).
6)Choose Next.
On the Save Variable page, an overview of the settings made for the variable will be displayed.
Confirm the entries and Choose Finish.
7) If the Formula variable is directly assigned to the Calculated Key Figure, a warning Calculated Key Figure is not defined correctly will be displayed while executing the Query.
8) Properties of Calculated Key Figure dialog box, assign a Technical name for the CKF.
9) set the Time of Calculation to After Aggregation.
Hope this will help you.
Cheers,
DK
Edited by: Debasish Khaitan on May 14, 2009 1:03 PM

Data Load : Number of records count

Hi Experts,
          I want to document number of records transferred to BW during an infopackage execution.
          I want to automate the process by running a report in background which will fetch a data from SAP tables about number of records been transfered by all my InfoPackage .
I would like to know how should I proceed with.
         I want to know some System tables which contains same data as that of RSMO transaction displays to us.
Kindly help with valuable replies.

HI,
inorder to get the record counts report you need to create a report based on below tables
rsseldone, rsreqdone, rsldpiot, rsmonfact
Check the below link which explain in detail with the report code as well.
[Data load Quick Stats|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/90215bba-9a46-2a10-07a7-c14e97bdb764]
This doc also explains how to trigger a mail with the details to all.
Regards
KP

How can we increase the maximum number of records which we export from UME

Hi All,
Is there any way to increase the maximum number of records which we can export from the UME.
Please give your valuable suggestions as soon as possible.
Thanks in Advance
Regards,
Ramalakshmi.S

I didn’t find any configuration you can set to increase the number. I think it is related UI. The number is designed programmatically.
Lisa Zheng
TechNet Community Support

Change number of record displayed for a single item alone

Hi,
I have a single data block with few items. Is it possible to make one item in the block as non-database item and make the display of record in the item alone to show multiple lines.
i.e. All other items in the Data block shows single record, whereas this particular item should shows 10 records.
Is this achievable?
Or should i have to put that item in a separate data block and choose the data block property to "Number of records displayed" as 10?
Thanks,
Yuvaraaj.

983448 wrote:
Hi,
I have a single data block with few items. Is it possible to make one item in the block as non-database item and make the display of record in the item alone to show multiple lines.
i.e. All other items in the Data block shows single record, whereas this particular item should shows 10 records.Yes you can. But i will say re-check your design.
Hamid
Mark correct/helpful to help others to get right answer(s).*

How do I count the number of records returned in the CMIS query

How do I count the number of records returned in the query CMIS?
SELECT COUNT(*) FROM ora:t:IDC:GlobalProfile WHERE ora:p:xRegionDefinition = \'RD_PROJETOS_EXCLUSIVOS\''}
Euler Homero

Hi Euler,
interestingly enough, the reference guide for CMIS ( http://wiki.alfresco.com/wiki/CMIS_Query_Language ) that I found does not mention the COUNT function at all. On the other hand it states that: "The SELECT clause identifies which virtual columns to return in the result set. It can be either a comma-separated list of one or more queryNames of properties that are defined by queryable object types or * for all virtual columns."
There are, however, some other posts like e.g. http://alfrescoshare.wordpress.com/2010/01/20/count-the-total-number-of-documents-in-alfresco-using-sql/ which state that they could make it working.
Having asked in the WebCenter Portal forum, I assume that your content repository is WebCenter Content. The CMIS doc for the Content is available here: http://docs.oracle.com/cd/E23943_01/doc.1111/e15813.pdf (no COUNT there either). It does, however, mention explicitly that "CMIS queries return a Result Set where each Entry object will contain only the properties that were specified in the query.". This means your could rather investigate the Result Set. Note that there are also other means than CMIS how to get the requested result set (e.g. calling a search service directly via so-called RIDC).
In the given context I am also interested what your use case is. OOTB CMIS in WebCenter Portal is used, for instance, in Content Presenter, where it is content rather than "parameters" what's displayed.

MM17 Maximun number of records

Similar Messages

Maybe you are looking for