MMBE and MB51
i find there are 38 stock for a material in mmbe but in history i am not able to find any documents.They are not archived too.How could the stock come?
Hi,
Check this OSS note implemented in ur system or not
SAP Note 205042 - MMBE: Incorrect SET-GET when going to
MB51
Regards
Pramod
Similar Messages
-
Inventory Management MMBE and MB51 - Authorizations
Hallo Support ,
Please find the requirement below.
The user wishes to view the material documents details from MMBE and MB51. This is ultimately calling the program SAPLMIGO as a result the Material document is displayed.
But at the same time the user who views the above material documents should be restricted for the transaction MIGO as it results in creating material documents as well.
Please do let us know the required roles or authorization objects that need to be assigned to the user in this regard.
Please feel free to contact for further queries
Reagrds
RameshHi
MB03
has the following MM auth.objects
M_BEST_EKO
M_MSEG_BMB
M_MSEG_LGO
M_MSEG_WMB
and
MB51 has
M_ANFR_BSA
M_ANFR_EKG
M_ANFR_EKO
M_ANFR_WRK
M_BEST_BSA
M_BEST_EKG
M_BEST_EKO
M_BEST_WRK
M_MATE_CHG
M_MATE_STA
M_MRES_BWA
M_MRES_WWA
M_MSEG_BMB
M_MSEG_LGO
M_MSEG_WMB
M_MSEG_WWA
M_RAHM_BSA
M_RAHM_EKG
M_RAHM_EKO
M_RAHM_WRK
and MIGO
M_ANFR_BSA
M_ANFR_EKG
M_ANFR_EKO
M_ANFR_WRK
M_BEST_BSA
M_BEST_EKG
M_BEST_EKO
M_BEST_WRK
M_EINF_EKO
M_MATE_CHG
M_MATE_MAN
M_MATE_STA
M_MATE_VKO
M_MATE_WRK
M_MRES_BWA
M_MRES_WWA
M_MSEG_BMB
M_MSEG_BWA
M_MSEG_BWE
M_MSEG_BWF
M_MSEG_LGO
M_MSEG_WMB
M_MSEG_WWA
M_MSEG_WWE
M_MSEG_WWF
So in order to just display from those which contains MSEG
the ACTVT (Activity) should be 03 Display
Regards -
Difference between MMBE and MM51
Good morning.
We discovered there is a difference in stock between MMBE and MB51, but were able to localize it to the offending movement type (they are plant transfers, movement type 303 and 305).
Are plant transfers the reason for the discrepancy? Or should we even compare the quantities of MMBE and MB51?
Regards
MoggieHi SAP FC. Thanks for your very prompt reply.
My understanding (and perhaps it is an incorrect one, I am a BASIS administrator and am only looking into the issue because a user reported this to me) is that the totalling of all material documents in MB51 should equal the stock currently shown in MMBE. However, as I stated, I found the transfer to plant movements shown in MB51 are not included in MMBE's count when I investigated the user's request. Subsequent comparisons using different plants and materials produced the same results. The transfer to plant movement types apparently are not totaled.
Before posting here, I was going to tell the user to
a) either filter out the transfer to movement types when using MB51
b) do not use MB51 for determining the stock total of a material in a plant (use MM03 or MMBE instead)
However, I wanted to be sure by posting in this forum and getting clarification
Regards
Moggie -
FM or table to get the batches and stock of material as in MMBE or MB51
Hi Gurus,
Please help me with function module or table to get the current batches
and unrestricted stock for the respective material and plant. And the reference transaction with is MMBE or MB51.
I want the same data as in MMBE or MB51 transaction.
Please reply me as soon as possible.
Regards,
SagarHi,
I dont think there is any BAPI for this (on 46C).
Instead, you can check following tables:
EINA, EINE, A017(Plant)/A018, KONH, KONP, KONM, KONW for Purchasing Info Records / conditions associated with it.
Hope this helps.
Best Regards, Murugesh AS -
Hello all,
We have comparision between the reports MC.A and MB51 with the same selection criteria.
Can any one please confirm, whether the receipt value calculated in the report MC.A will be equal to the multiplication of the Price available in the material master and quantity received in those dates.
As we have ran both the reports with the same selection, we have obtained material documents in MB51 for which we have sepeartely calculated Receipts and Issues. Now this values does not seem to be equal to the Value receipt / Issue in the report MC.A. Hence we request to let us know the reasons for the different behaviour of the reports.
thanks & regards
ChaitanyaHi,
Can you please explain the behaviour of the report MC.A using an example. I would like to know how the field "Valuereceipts" is getting calculated.
thanks & regards
Chaitanya Rayaprolu -
what is the difference bwtween mmbe and mb52 - or in other words when do we use these transactions in specific.
Thanks in advance for ur helpMMBE
Stock Overview: Company Code/Plant/Storage Location/Batch
Description
The stock overview provides you with an overview of the stocks of a
material at all organizational levels. This distinguishes it from the
Plant Stock and Storage Location Stock views in the material master
which provide an overview of the stocks only at a particular plant or
storage location.
You can access the stock overview from the Material Master screen by
choosing Other -> Stock overview. On the screen that appears, you enter
the relevant material. You can also enter selection criteria to restrict
the overview.
Under List display, you are required to specify a display version. Under
Select display levels, you can restrict the stocks displayed in the
basic list to specific organizational levels.
Output
Basic List
The basic list appears when you choose Execute, and provides an overview
of the stocks at all existing organizational levels according to your
selection criteria. You can navigate from one window to the next in the
stock overview by choosing Right columns or Left columns accordingly.
Breakdown List
If you want to display only the stocks at a particular organizational
level, position the cursor on the appropriate line in the basic list and
choose Breakdown next level. The breakdown list appears. It provides an
overview of the stocks at the organizational level selected and at the
next level down according to your database selection criteria.
Details
In either of these lists, you can display the following details by
positioning the cursor on an organizational level or stock type and
choosing Choose:
o Stock at a particular organizational level
Example
You want to display all existing stocks in plant 0001. You can do
this in either the basic list or breakdown list by positioning the
cursor on the stock line for plant 0001 and choosing Choose. A
dialog box appears in which the stock quantities are listed by stock
type for plant 0001.
o Details on a stock type
Example
You want to display all the vendors for a consignment material. You
can do this in either the basic list or breakdown list by
positioning the cursor on the Vendor consignment line and choosing
Choose. A dialog box appears in which the individual consignment
stocks of the material are listed by vendor.
Displaying the Batch Classification
On the stock lines from batch level downwards, you can display the
classification for the respective batch by positioning the cursor on the
appropriate stock line and choosing Extras -> Batch classification.
Displaying Stocks in Alternative Units of Measure
You can display the stocks of the material in an alternative unit of
measure by entering the unit in the Unit of measure field in the stock
overview header and choosing New selection. You can display the
alternative units of measure that have been defined for the material by
choosing Extras -> Units allowed.
Switching to a Different Material
From the stock overview, you can display an overview for another
material by entering the material concerned in the Material field in the
stock overview header and choosing New selection.
MB52
Reporting in Inventory Management
Use
To simplify your day-to-day work with the Inventory Management component, there are a range of functions and reports that provide extensive information on all materials with their stock data.
This section provides an overview of the reporting function in Inventory Management. For more information, refer to the documentation on each function or the relevant report documentation.
Features
Environment Menu
List displays
This provides reports for documents posted in Inventory Management. Example: material documents for a material.
Stock
This provides information on a materials stocks. Example: current stock/requirements list.
The stock overview provides an overview of all stocks of a material over all organizational levels (see also Plant/Storage Location Stocks).
Information
This allows you to display data (master data, transaction/movement data) from other applications. Example: displaying a purchase order.
Balances display
This provides reports on the GR/IR clearing account.
Consignment
You can use this to display all information on consignment stocks. Example: displaying vendor consignment stocks.
Batch where-used list
This provides all the functions on the Batch Where-used List.
Batch search strategy
You use this to define the strategies for Batch Determination.
Inventory Controlling
You can also analyze and evaluate material stocks using Inventory Controlling. For more information, refer to the LO Logistics Information System component.
Periodic Processing Menu
List of stock values
This report is used to display the total stock quantity and the total stock value for a material at plant and storage location level.
Consistency check
You can use this to check the consistency of your stocks at company code level, valuation area level, and material level.
Managing held data
When you enter a goods receipt, this function allows you to display and delete data that you have held for further processing but not yet posted.
Analysis of rounding differences
This function allows you to analyze rounding differences that resulted from conversion between units of entry and base units. This applies when you work with a material with metric and non-metric units of measurement, for example.
Activities
For the reports that work with the ABAP List Viewer, you can configure the output list as you require to display and evaluate further data. To extend the current display variant (basic list) or choose another existing display variant, choose Settings ® Display variant. You can also create your own display variants and choose them on the initial screen. For more information on the ABAP List Viewer, see the ABAP List Viewer component. -
Difference between MC.A and MB51
Dear Experts,
Why I am getting different figures for Receipt and Consumption in MC.A and MB51
ThanksHi,
Please check the report MB5B .You can down load the report and you can have a comparision for the issues .
and try for RM07MMFI .It wil show a diff if there exists any .Please check the note 32236 for these types of inconsistencies.This is a master note which lead to many.
Regards, -
Difference between MMBE and MC.9
Hi gurus,
what is the difference between MMBE and MC.9 ?
regardsHi
Using MMBE we can see the stockquantity(how much stock exists in different stock types and storage locations) of <b>a particular material</b>.
But by using MC.9 we can the stock values of <b>range of materials at a time</b>.
Reward if useful
Thanx and Regards
SHYAM.R -
MB5L shows value but MMBE and other transactions showing 0 value
Hi Gurus,
The issue i am having here is, i am having a Material XXXXX for the Plant YYYY. When i checked the stock for the material in MB5L, it is showing some KGs. But when i am checking the MMBE transaction, it shows 0 Value. Also when i checked the MBEW table it is showing the value, similarly on MSEG and MARC tables it shows 0 value. Now my concern here is
1) What could be the reason for this?
2) How we can make it sync the both the Tables?
3) What happened to the history for this in MB51 and other transactions for this material?
4) How should we approach this issue?
Please advise and share your knowledge gurus. Thanks for your help in advance.
Regards,
SaakithyanHi
Check if Note 968812 - MM/FI Difference for material stocks is relevant for you
Regards
Eduardo -
Mmbe and mb52 stock difference
Hi friends
in mmbe customer returns in returns location is 100 but mb52 in shows 0 how it is possible? why?Hi
try this
give only material number on selection screen and execute both report and check the result
Regards
Kailas Ugale -
Differnce of - MC.6,MC.A and mb51
Hi all,
When I am running following reports they are giving different values for same material.
Can anyone explain me what is the purpose of these reports each?
1. MC.6
2. MC.A
3. MB51
Thanking you.Hi
MC.A Plant level Receipt/Issue Analysis :
This includes stock at different levels & special stock like stock issued to vendor , consigment stock etc which is valuated at plant level.
Path : Information Systems - General Report Selection - Materials Management - Inventory Management u2013 Inventory Information Systems - Material
MC.6 Storage location wise Receipt/Issue Analysis : MC.6 will not consider any type of special stocks so there will be variance between both the reports.
MB51 : Mb51 shows all types of material documents for different goods movements.
It depends upon movement types and transaction you did.
If you did migo with 101 movement type then on display this document only.
For different transaction the screen may be different
Thanks -
Archived delivery's stock seen in MMBE and not in LS24
Hi All,
In MMBE stock for an archived delivery is seen, it is not seen in LS24. In fact the document flow in Sales order shows the process was done till Delivery and it was archived then.
Can anyone help me in this, how can I get rid of from this stock in MMBE. Though LS24 is apparently right.
Waiting for your replies...
Thanks,
Amit GaigawaleHi,
The Delivery was not PGied. The stock in MMBE is reflected in Unrestricted stock, however it doesn't branch to WM stock view when from menu I try to see that.
Amit G -
Stock difference between MMBE and YMB5B
There is a difference of 300 nos between the stock in MB5B and MMBE. Then i found that the same quantity is shown as blocked stock under FNPR category in MMBE.
I dont know how to find that "Blocked" stock and release those for "unrestricted use".
Can someone help me to find that blocked stock and release it.Dear,
Select the column stock shown and right click and check the relevant document which these blocked stock available.
You can display GR blocked stock in 2 views:
LOGISTICS u2013 MATERIAL MANAGEMENT u2013 INVENTORY MANAGEMENT u2013 ENVIRONMENT u2013 STOCK u2013 STOCK OVERVIEW
LOGISTICS u2013 MATERIAL MANAGEMENT u2013 INVENTORY MANAGEMENT u2013 ENVIRONMENT u2013 INFORMATION u2013 PURCHASE ORDER.
When conditions of the material are fulfilled you can transfer the material to un-restricted, quality or blocked stock. the valuation and updation of stock data does not take place until the material is released using movement type 105. If conditions are not met, you can return the material to vendor also.
RELEASING GR BLOCKED STOCK
LOGISTICS u2013 MM u2013 INVENTORY MANAGEMENT u2013 MATERIAL DOCUMENT u2013 RELEASE BLOCKED STOCK.
Choose Release GR blocked stock and Material Document.
Enter the material document number and the year of the document that was generated at the time of posting GR blocked stock.
Regards,
Syed Hussain. -
Qty difference between "mmbe" and "/afs/md04" transaction?
Dear Gurus,
When I am checking MMBE txn for a material, it is showing me 201 qty in Unrestricted stock(batch)..
but when I am checking in "/afs/md04" txn, it is showing me 55 qty for Unrestricted stock(batch)..
why is this discrepancy?
pls help..I assume you are only checking for the "A" tab and comparing only the batch stock ( Stock type - C) , /AFS/MD04 is a stock and requirement list and MMBE is a stock report , if you have compared only the batch stock , might be you can run the report /AFS/SDRQ to check for inconsistency , Hope this helps...
Arun -
Material selection from mmbe and pack it to Hu02.
Hi guys
Tell me the way to pack the material(In batches) from the stock mmbe to hu02.
I meant as soon as i select the material in mmbe02 the system automatically retrieve the data and through it to the relevant fields of the HU02 and finally i select the packing material and pack it.
Best Regards:Vijay Kumar
Edited by: vijay gemnnai on May 27, 2010 12:41 PMHi,
the most easiest and straight forward approach is
- Ckick the "Binding" tab at the bottom of the Visual Editor
- In the Bindings section click teh green plus icon and choose Generic Bindings | Attribute Value
- point the iterator selection to the iterator used by the table
- choose the column's attribute name from the list of attributes
- Create a method on the ApplicatioNModule IMPL class (should take single argument)
- expose it as a client interfaces so it shows in the Data Controls panel
- In the "Binding" tab, create a method binding for this exposed method
- point the method binding argument to #{bindings.column-attribute-name.inptValue}
So whenever you need to pass the value on to the AM, you just call the method binding
OperationBinding oper = (OperationBinding) bindings.get("name of method");
oper.execute();
Frank
Maybe you are looking for
-
Can I hold a conference call on Face Time?
Can I set up and hold a conference call on Face Time, using four different locations simultaneously?
-
Clear all user preferences elements 9
Hi how can I reset elements 9 to its default settings when it is first loaded deactivating uninstalling and reloading did not work for me it found and reused my old settings when I reinstalled it? I am running windows 7 home premium 32 bit on a duel
-
Sales Order Partner Functions (Payers,Ship to Parties)
Hi All When creating a Sales Order in the ICWC application,how can we get all the business partner which belong to different partner functions (All Possible Payers,All Possible Ship to Parties). In the application only one value is displayed by defau
-
Vendor User Exit at Initial Screen
Dear friends When a vendor is created through XK01, I would like to control that if u201CAccount Group 1000u201D is entered then Purchasing Organization and Company Code fields must be mandatory before skipping them empty at initial screen. Although
-
Help I don't know if this is a facebook or an iphone problem: All of the sudden I don't get push notifications of group posts anymore on my iphone. I do get them on my macbook so they are turned on. I still get notifications of comments on my posts a