Archived delivery's stock seen in MMBE and not in LS24

Hi All,
In MMBE stock for an archived delivery is seen, it is not seen in LS24. In fact the document flow in Sales order shows the process was done till Delivery and it was archived then.
Can anyone help me in this, how can I get rid of from this stock in MMBE. Though LS24 is apparently right.
Waiting for your replies...
Thanks,
Amit Gaigawale

Hi,
The Delivery was not PGied. The stock in MMBE is reflected in Unrestricted stock, however it doesn't branch to WM stock view when from menu I try to see that.
Amit G

Similar Messages

Report showing Total Stock of individual materials and not specific to Sloc

Our requirement is to display the current Stock of every individual material with its description and not Storage location specific..
We dont want the Stock specific to Storage Locations.We need the overall Stock of individual materials.
Pls dont suggest
MMBE Stock Overview
MB52 List of Warehouse Stocks on Hand
MB53 Display Plant Stock Availability
MB54 Consignment Stocks
MB5B Stocks for Posting Date
MB5W List of Stock Values
MC.1 INVCO: Plant Anal. Selection: Stock
MC.5 INVCO: SLoc Anal. Selection, Stock
MC.9 INVCO: Material Anal.Selection,Stock
The above doesnt solve my purpose.
Apperciating ur immediate response.
Regards
Zulfikar

Hi Zulfikar Ali,
Develop a Z-Report with help of techinal consultant...........
regards,
Patil

Delivery address appearing at Item level and not at Header level in PO

Hello Experts,
We are facing an issue as described below:-
We are in SRM 7.0 using classic scenario.
After approval of multi line Shopping Cart in SRM ,PR's are getting
automatically created in backend R/3 system.After converting PR's into
POs in backend R/3,we are observing that the delivery address for these
PO'are getting printed at Item level and not at the Header Level
inspite of the delivery address being same for all the Item level.
As desired,the delivery address in the PO's should have the delivery
address at the header level if the the delivery address is identical
for all the Item Levels.
However,if we create a PR directly in R/3 system and then convert these
PR's into PO's in the backend R/3 system,we find that the deliver
address are getting printed at the Header Level if the delivery address
is same for all the item level(which is as desired)
Any pointers will be highly appreciated.
Thanks & Regards,
RKS

HI Paul,
Thank you for your response.In our case even if all the Line/items level have same Plant and storage location still the delivery address is getting printed at Item level and not at Header Level and this is happening only for PO's created from PR's orginating from SRM7.0.
However if we create PR's directly in R/3 and then convert them into PO's,the delivery address is getting printed at the Header level if the delivery address is same for all the Item level.
Can you plz some insite into this?
Your help will be highly appreciated.
Regards,
RKS

Stock difference between MMBE and YMB5B

There is a difference of 300 nos between the stock in MB5B and MMBE. Then i found that the same quantity is shown as blocked stock under FNPR category in MMBE.
I dont know how to find that "Blocked" stock and release those for "unrestricted use".
Can someone help me to find that blocked stock and release it.

Dear,
Select the column stock shown and right click and check the relevant document which these blocked stock available.
You can display GR blocked stock in 2 views:
LOGISTICS u2013 MATERIAL MANAGEMENT u2013 INVENTORY MANAGEMENT u2013 ENVIRONMENT u2013 STOCK u2013 STOCK OVERVIEW
LOGISTICS u2013 MATERIAL MANAGEMENT u2013 INVENTORY MANAGEMENT u2013 ENVIRONMENT u2013 INFORMATION u2013 PURCHASE ORDER.
When conditions of the material are fulfilled you can transfer the material to un-restricted, quality or blocked stock. the valuation and updation of stock data does not take place until the material is released using movement type 105. If conditions are not met, you can return the material to vendor also.
RELEASING GR BLOCKED STOCK
LOGISTICS u2013 MM u2013 INVENTORY MANAGEMENT u2013 MATERIAL DOCUMENT u2013 RELEASE BLOCKED STOCK.
Choose Release GR blocked stock and Material Document.
Enter the material document number and the year of the document that was generated at the time of posting GR blocked stock.
Regards,
Syed Hussain.

In Stock Online but not in stock in any stores and not available for Delivery?

I am having an issue and I can't understand it. Recentally I have been searching everywhere for an affordable copy of "Fire Emblem Radiant Dawn." I come across Bestbuy's online store and there it is pre owned for 29.99$!! I was so excited to finally have found it. The website says that the game is available and in stock so I go to order it. But to my dismay not a single store in South Carolina has the game in stock, and the game is not available for shipping. So I came to the forums first since I am at work, so I want to know is there anyway I can get my hands on this game from Bestbuy? Can I have one branch send it to another or have it delivered to me or am I stuck brooding over the fact that I can't get a hold of this game? I would appreciate the help but this issue has really disapointed me and killed my rush and excitement tonight.

I took a look at that item on BestBuy.com and it seems that is a Pre-Owned game. Clearly from the name, this game must be previously owned before Best Buy can re-sell the item, so not every single store will have a copy. Unfortunately, if the Store Pickup option isn't showing any inventory in nearby stores, it means that no Pre-Owned copy is available to ship. Online orders pull from the district/territory warehouse(s), so it will be much harder to get a copy of this game than a normal item which is regularly stocked. Perhaps a Forum Moderator can shed more light onto this situation or offer a solution I haven't mentioned. Hope you can get your hands on a copy of this game!!

ZERO quantity avilable in Replenishment delivery (enough stock in MMBE)

hi
While creating replenishment delivery from STO system given delivery qty is ZERO. if i try to enter the qty as '1' system is not allowing and giving error as "ZERO qty is avilable" for that Material Code stock is showing '6'. is it having any relation with avilability check?
Rajendra

Hi,
It depends on where that 6 items are, they could be in QI stock, safety stock or Blocked stock.
There could also be other deliveries etc. that mean the 6 is already required elsewhere.
MMBE is not the ideal enquiry for availablity, it is designed to show the Physical stock (i.e. where it is not if it is available or not. Try MD04 for this material and plant and see what it is showing. It should show you the stock and any other requirements affecting the availability.
Steve B

Stock Quantity at Mc.9 and MMBe is not Matching

Hello,
The stock Quantity for a prticular material in MMBE is not matching with stock qunatitty in MC.9 and Mc.5
Can you please suggest me how to resolve this.
Thanks & Regards,
SAGAR

Hello,,
MMBE is the correct value for the current stock quantity. MC.9 and the other reports use tables S031/S039 or thereabouts, which is updated incrementally each month using the previous month's record and the issues / receipts during the month. Once the file gets corrupted - and it does - in our case about 5% of records are incorrect - that incorrectness is perpetuated in the following months, and the difference remains forever.
You can determine that the S031 record is in error by starting with the current month and looking at the Val stk rec qty and the val stk iss qty movements and the valuated stock, which will allow you to calculate what the stock at the end of the previous period should be. Run MC.9 for the previous period, check the valuated stock corresponds to that calculated, and repeat with the movements. You can do this in yearly periods until you find the error and then go down finer. I find that most of our corruption occurred in the first few months of using SAP.
If anyone knows of a method to regenerate the whole record in the S tables
I would be grateful for the info.
Conclsion:MMBE reads the current stock, while MC.9 or MC.5 are transactions that are feeded from infomation structures (which are updated with lower priority than stock tables). If an update of a infostructure fails, then there is no harm to the stock table update, but your statistics are just out of sync then.
So in short, you can trust MMBE, but no the statistic transactions
Regards
Mahesh Naik.

Made a UD to 'Scrap'. But Stock Category is "Q" and does not show in MMBE "Blocked"..WHY?

Hi,
I made a UD of an Insp Lot to 'Scrap' in the Inspection lot stock tab.
The system automatically created a material document with movement type 553 (Direction -) and 551 (Direction +)
However the stock Category in the material document is "Q". IS THIS CORRECT? SHOULD THIS BE "S" (This is in the WM tab of the material document).
Also when I query MMBE after the above UD to Scrap, the batch quantity is not shown either in Quality or Blocked stock. IS THIS CORRECT?
Please advise.
Regards
Priyanka

My understanding was when I input a quantity in 'Scrap' field during UD
1) The stock should be blocked (hence it will show under blocked stock column in MMBE)
2) The stock category should be "S" and not "Q"
I agree that in MMBE based on your explanation the stock should not be shown in blocked.
But can you explain why the stock category is "Q" instead of "S"
Regards
Priyanka

Outbound delivery allows only the unrestricted stock for particular material and plant

Hi,
In STO I have an problem the outbound delivery creations allows all stocks under unrestricted, Quality inspection, Block stock.
I want the outbound delivery creation of a particular material and plant it allows only the stock under the unrestricted only. It doesn't allows the stocks under the Quality inspection and Block stocks.
I need to know how to configure this or how to solve my requirements.
Regards,
Ramesh N

Dear Mohammed ,
as per your scenario , there is two movement type has to trigger in the Delivery level according to the plant and material combination .
as per my knowledge it will not configurable in standard process . this will possible with user exit logic only .
follow the below logic to achieve your issue .
you have to create two item categories and two schedule lines with (655 &653) , that means your movement type has to trigger at sales order level only . write a logic in the user exit - MV45AFZZ -USEREXIT_MOVE_FIELD_TO_VBAP , if this combination matches then automatically item category has to over write other wise it will copy the existing item category .at delivery level you can see two movement types in item level.
wait for other experts solution , if any standard is possible or not .
Regards,
C.B Reddy.

Delivery in stock transfer

Hi,
When I am doing the delivery for stock transfer with t code VL10B,I am not able to do the delivery.What could be the reason.
There is enouhg material in stock and material is also created for both the plant.
Regards
prabudh

In VL10B/VL10D, give your STO/PO no. and remove the dates and shipping pt and execute.
If you are not able to create the delivery, then check the log, you will get the exact error.
Check the stocks in mmbe, also check if the stock is scheduled for delivery or is assigned to some open orders.
Regards
Noopur

Replenishment delivery for material with MRP areas and Avl Check

HI We have MRP area at storage location level maintained for materials. Stock exists in the plant in the storage location which is part of the MRP area.
Now when I create STO and try to create delivery for the same, system is giving message 0 stock available and not creating delivery. Material has 02 Avl Chck group.If I deactivate the MRP area in the material master, it allows creation of delivery.
How can I ensure that system creates delivery even though stocks exist in MRP area relevant sloc only in the plant?
Sriram

1) According to SAP when inbound deliveries are used and your delivery item category is set up for mvt type 101, these should be received with transaction VL32N. If you use MIGO/MB0A instead the GR status in the delivery will not be updated. If you then report on open deliveries you'll notice that nothing is received in the course of time. Amazing. Now if you set up the delivery item category without the movement type your inbound will not even be GR relevant. Just one of these things that's nice to be aware of.
Check note 199703.
may b it helps...

Open Qty is not copied in Delivery for Stock Transfer Order

Hi,
In the Stock Transfer Order process, Once the STO Order is created, I am creating delivery in the transaction VL10B or VL10G.
When I am clicking the background button Delivery gets generated. Then when i am going in the transaction VL02N and increasing the delivery Quantity which is more than STO order quantity, the system is accepting it. But i want the system to throw an error message if the delivery quantity is more than the order qauntity. For this I have made the following settings.
In the Transaction Code 0VLP, i have selected B in Check Over Delivery field. But still it is not throwing an error.
The reason for the same may be, the system is not copying the Open Delivery Qty from the STO Order (Which normally happens in Sale Order to Delivery process, bcos of Copy Control). This field has 0 value. So the system is not able check for over delivery.
If I get this value in the delivery then it should be working fine and the sytem will throw an error for over delivery.
Can you please suggest me a way to get this open qty value in delivery for STO order or suggest me some other option to check for over delivery in STO.
Regards
Vijay

Dear Friend,
If I can understand you clearly.
to achieve your task the best way you can sit with your abaper and configure a routine and assign the same to T-code OVLK delivery type customizing :
In the Item requirement : Generally it is 202
reward points if helpful,
regards,
Amlan

Problem on creation of Outbond Delivery for Stock Transfer Order

Hi all,
We have problem on the creation of Outbond delivery for stock transfer order because the system doesn't group in a unique delivery for different items of a STO order.
We used VL10B or VL10D but the behaviour is the same. Even if we have to handle few items of the Stock Transfer order already scheduled, the scope is to create a delivery which group everything while the system split in several delivery notes.
Could you advice me the way to set in customizing , master data I don't know where else , the rules in order to avoid to split deliveries for STO.
Secondly if we have already created a delivery note is it possible to add a further purchase order item as in sales order processing?
Thank you for any suggestion you will give
Andrea

Dear Kripa,
the first point has been solved. We have checked a SAP Note 386340 which is appropriate to this case.
The second point, the one referred to the additional items to an existing delivery note, is not yet closed and I would like to know further advices from you and the other guys connected to the forum in order to help us to solve the problem.
Thanks for your help
Andrea

Stock Transport Order (STO)will not create delivery

I have created a intercompany Stock Transport Order (STO) and it has created the shipping tab in the Purchase order(PO), and all seems to be correct.
I have material in the plant, yet when I go to create the delivery using VL10G, the PO does not show as a choice. I also do not get an error, so I cannot tell why it is not creating the delivery.
Is there a way to see an anaylis of why the STO is not showing as a choice?
Thanks,

Hi,
Please check the delivery date in the STO created.and adjust the del creation date etc input fields at VL10G and try the posting.If there exists no error in the po created.

Create Outbound Delivery without Stocks

Hello.
Anybody with AFS experience?
When creating outbound delivery with reference to an STO, the system allows me to allocate the full quantity (60pcs), even if the available stocks is only 40pcs.
How is this possible? My understanding, we will only be able to create the delivery for the available stocks.
Help.

Hi Gemma,
If there are no stock at all, then you will not be able to create delivery agianst STO. If there is partail qty available, then delivery can be created. eg. if stock is 20 kg and in the STO if the qty is 40 kg, you will still be able to create delivery, but when stock is 0 kg, you will not be able to create delivery..........it will give an error message" An item with no delivery quantity is not permitted. Item will be deleted."
hope this helps............
Rgds,
Anitha J

Archived delivery's stock seen in MMBE and not in LS24

Similar Messages

Maybe you are looking for