MO: Operating Unit Non Usable Operating Unit for Multi-Org Conversion

Hello Hussein
I enabled multi org in 11i and mo Operating unit values set as Non Usable Operating Unit for Multi-Org Conversion, is ok to set is value or will that cause any responsibility.
In R12.1.3 I am getting an error like this
APP-FND-02902: Multi-Org profile option is required. Please set either MO: Security Profile or MO: Operating Unit profile option.
Please advice
Thanks
Prince

user12094010 wrote:
Hello Hussein
I enabled multi org in 11i and mo Operating unit values set as Non Usable Operating Unit for Multi-Org Conversion, is ok to set is value or will that cause any responsibility.This might cause issues.
ORA-20001: APP-FND-2902: Multi-Org Profile Option is Required [ID 399910.1]
How To Prevent the Profile Option MO: Operating Unit being set to NULL at Site Level? [ID 393560.1]
In R12.1.3 I am getting an error like this
APP-FND-02902: Multi-Org profile option is required. Please set either MO: Security Profile or MO: Operating Unit profile option.
Please adviceR12 - Error ORA-20001, APP-FND-02902 Accessing Profile Classes Form With Multi-Org Access Control (MOAC) Enabled [ID 602141.1]
Unable To Open Customer Account Details, Error :ORA-20001: APP-FND-02902: Multi-Org profile option is required [ID 987165.1]
Entering to Profile Classes Gets Ora-20001, App-Fnd-02902. Multi Org Profile Option Is Required [ID 465132.1]
Error 'ORA-20001: APP-FND-02902: Multi-Org Profile Option Is Required' When Open Account Details [ID 1406860.1]
Some Web Pages Fail To Load After Patch Application [ID 1281328.1]
You may also search MOS website for APP-FND-02902 and go through the docs.
Thanks,
Hussein

Similar Messages

Create one plan element for multi org in OIC R12

Hi There,
Can I create one plan element and use this plan element for 2 orgs, like US and CANADA?
In EBS R115, I have to create more than 100 plan elements in each org.
I want to know in R12 if i still need to do this. If I can create one set plan elements for multi orgs, will save a lot of time. The only difference of org US and CANADA is currency.
Thanks a lot !

It is same in R12 also. You need to do the same as what you did in 11i. Not much changes on plan definition side.

Preventing Item On Hand reservation in a configure to order environment for multi org same OU environment

I have a scenario in a configure to order environment where I want to automatically creating flow schedules based on sales order demand. I have two orgs in same OU.
1. How to setup sales order line to generate flow schedules in the manufacturing org and then ship the finished goods from the shipping org. I believe this can be done from sourcing rules to populate Warehouse field in sales order line with the shipping org and create Flow schedule in another manufacturing org. Please advise ?
2. Once flow schedule is completed I want to prevent the reservation of Finished good on hand against Sales order so that the On hand could be transferred to shipping org and shipped. Please advise ?
Thanks for your inputs.
Best,
Rajesh

Pl do not post duplicates - Preventing Item On Hand reservation in a configure to order environment for multi org same OU environment

Custom code for Multi-org - Use x_all tables or views with set_client_info?

Trying to determine what is normal for custom sql and plsql within 11i. I am trying to find out what other 11i installations are using in regards to custom code. Are you using the all tables or using the views utilizing setclient_info. Any feedback would be appreciated.
Note: We have converted to multi-org and are setup as a single organization.
Thanks, Ira

Hi,
Using views or table are depend upon the requirement of clinets and implementation.
If one need to access multiple tables, its always good to have a view and access that... else its same to access view or table...
Thanks
Yogi

Date and Time Issue for Mult Org...

Hello,
How can I manage the date time, if my organizations have different plant and location?
I.e. The database server located in Pacific Time zone and the application may access from new plant German time zone.
Whenever the German business center enters any sales transaction it should take German current date and time instead of Pacific Time.
Pls advice me
Thanks,Raghu.K

Hi,
While defining a Location, you can mention the time zone for that location and also the inventory organisation to which this location belongs.
So, this location can be assigned to your organisations. You can access the time zone according to the location you select.
regards

Output type for non assigment Handling Unit

Hi All.
I would like to make a Output type for non assigned Handling Unit
Can anyone tell me about it?
Edited by: John Brown on Feb 9, 2010 10:53 AM

Make a new output type, transaction NACE, application V6 (Handling unit) and assign the output type to your output procedure.
Create a new output requirement, transaction VOFM and assign it to the output type in the output procedure. In the requirement check on KOMKBV6-VPOBJ. The value of KOMKBV6-VPOBJ shows to which object the handling unit is assigned: '00' or empty for not assigned, '01' for outbound delivery. See the domain VPOBJ for all possible values.
Reagards Jack

Default hrs proposal for non milestone operations should not happen

Hi,
I have a sequence of 4 operations among which last operation is milestone and all other three operations are confirmed automatically when 4 th operation is confirmed. But I have removed the default proposal of activity hours in the confirmation parameters of that order type.
So when I confirm the 4 th operation automatically the first 3 operations are also confirmed with default activity hours as proposed by the system. But for 4 th operation system is not proposing any activity hours based on the configuration setting in confirmation parameters. But if I confirm first 3 operations individually using co11 then hours are not proposed and so there is not activity hours on confirmation.
My requirement is I donu2019t want any hours to confirm on the first 3 operations as default when I confirm the 4 operation which is milestone. Is there any setting required or any other way it can be avoided?
Regards
mohan

Dear ,
Reference to your requirement , you go for setting Not relevent for costing in Operation Overview in case Standard values is schedulling issue .
Othewise , try the below option in OPK4
1.In operation individaul entry scree keep -Confirmable operation check box marked
2.In general valid setting : in Check : Set Temination when operation sequence are not adeher too .
3.Create an operation control key where Confirmation not possible option is there .Copy from standard and assing the same in operations whihc u do not want to confirm .
Would like to know why do u need this kind process where u have operation hrs but u do not want to confirm ? what is the logic of keeping them in roouting and schedueling through APO ?
Regards
JH
Edited by: Jiaul Haque on May 25, 2010 8:29 PM

Getpeername: Socket operation on non-socket

when i am starting the in.ftpd service. i am getting the below error
in.ftpd[5418]: [ID 572618 daemon.error] getpeername: Socket operation on non-socket.
Thanks in advance.

I had the same problem with VMware. I also tried to connect with the VMware remote console, but got a similar error. In both cases it seems that it can not connect to the server for some very strange reasons.
I gave it another try with VMware player. The latest available version 3.1.0 and the previous version 3.0.1. Both versions did not start. The version 3.1.0 did not install a init script and 3.0.1 failed to start. In the end I gave up searching for errors.
Now I'm using VirtualBox and I am quite impressed of it's speed and stability. As long as you need a desktop virtualisation virtualbox will be probably all you need. I found it easier than vmware server. Sadly I was unable to try vmware player. So I can not compare the speed, but it is definetly faster than vmware servers remote console. But on the other hand the remote console of vmware server was developed for other purposes. It's not intended to be used as a desktop solution like vmware player.
If you need a full vmware server replacement then maybe xen would be a good try. Did not use it though, yet.

Persistant non-blocking operation problem

When using asynchronous database calls with non-blocking methods, I am getting a persistant error on the CreateSQL method call - the error is "OIP-04153: Non-Blocking operation in progress". This is raised even though the database connection has been closed and restarted and no non-blocking operations called. The methods used are similar to the following example code:
Dim OraDatabase as OraDatabase
Dim OraStmt as OraSQLStmt
Dim stat as long
Dim OraSess as OraSession
Set OraSess = CreateObject("OracleInProcServer.XOraSession")
Set OraDatabase =OraSess.OpenDatabase("ExampleDb", "scott/tiger", 0)
'execute the select statement with NONBLOCKING mode on
set OraStmt = OraDatabase.CreateSQL ("update emp set sal = sal + 1000", ORASQL_NONBLK)
'Check if the call has completed
stat = OraStmt.NonBlockingState
if stat = ORASQL_STILL_EXECUTING
MsgBox "Cancelling the asynchronous operation that is underway"
OraStmt.Cancel
End if
I cannot cancel the operation using OraStmt.Cancel because OraStmt Is Nothing!

Actually, that is not correct. All of the 48 port Gig-E line cards for the 6500 are oversubscribed; it does vary by the degree of oversubscription.
In a 6506 or a 6509 (with a Sup720) you have (2) 20 Gbps connections (per slot) to the fabric. With a WS-X6748-GE-TX you have a potential for 48 (Full Duplex) Gbps of traffic, but only 2 connections to the fabric. This yields an oversubscription rate of 1.2:1 (or 48:40) assuming a worst case scenario.
It should be noted that the 24 port 67xx cards are still oversubscribed as well, because they only have one connection to the fabric. There is a potential for 24 Gbps of traffic and only (1) 20 Gbps fabric connection, so it has an identical oversubscription rate.
By using only 24 of the 48 possible ports, depending on which ones you choose, you should be OK. But I do not know which ports use which fabric connection on the backplane, so I can't assist you in picking them.
It should be noted that in most environments it is unlikely every port will be a 100% utilized so the risk of dropping packets because of oversubscription is low.

Retrieving Positions for Specific Org Units

Hi All,
I have a headcount report to develop. It will run for one personnel area at a time. So for the period run, I have to list out all the org units under the personnel area as well as the sub org units. For each of the org units I have to separate positions under them into two group - total of positions with holders and non-holders.
I am using the function RH_STRUC_GET by passing org unit to retrieve positions. May I know which result table to read in order to get positions and how to segregate them into 'With Holders' and 'Non-Holders'?
And also how to get the relation ship between org units because I need to display that in the report also.
Thank you in advance
Regards,
Lily

Hi..
Existing Organizational Units (Report RHXEXI00)
Staff Functions for Organizational Units (Report RHXSTAB0)
Organizational Structure with Persons (Report RHXSTR02)
Periods for Unoccupied Positions (Report RHFILLPOS)
Existing Positions (Report RHXEXI03)
Staff Assignments (Report RHSBES00)
Position Description (Report RHXDESC1)
Staff Functions for Positions (Report RHXSTAB1)
Vacant Positions (Report RHVOPOS0)
Obsolete Positions (Report RHVOPOS1)
Complete Position Description (Report RHXSCRP1)
Reporting Structure without Persons (Report RHSTR05)
Reporting Structure with Persons (Report RHSTR04)
Activity Profile of Positions (Report RHXSTR07)
Activity Profile of Positions with Persons (Report RHXSTR08)
Existing Objects (Report RHEXIST0)
Structure Display/Maintenance (RHSTRU00)
Reporting on an Infotype (Report RHINFAW0)
Starting an HR Report (Report RHPNPSUB)

Regarding Add New Non-SAP Software Unit in SLD

Hi Experts,
While We r Creating the Product in SLD, It is Asking for <b>"Add New Non-SAP Software Unit"</b> .
What is This ????? Why Do We Use this ????
I saw this Option in Only PI7.0......
Regards
Khanna

HI Khanna
Those are none other than Software Components that are not existing in the list and you are creating it new.
For example if you are selecting the Product that is existing say "SAP ECC". Now when you go for creating Software Component versions you can select from the list or you can creat your own. When you are creating of your own Software Component it is called Non-SAP Sotware Unit.
Cheers..
Vasu
<i>** Reward points if found useful **</i>

Non-Milestone Operations to display in Co11N

Some operations in my Routing have a control key that says its a milestone operation and some operations with a control key that says Confirmation possible. When I went to CO11N to do confirmations only the Milestone operations are showing up for selection.
I can manually type a non-milestone operation no and do a confirmation but I was wondering if there is a way to make these Non-milestone operations also appear in the selection.
Thank you

Dear,
In customisation of confirmation parameters (OKP4) for the plant, order type combination you need to activate the check box for +Confirmable operations in the tab page "Operation Indv. entry using intial screen".
Regards,
Prasobh

Windows Server 2012 R2 Fax Service - Windows 7 Client "You do not have permissions to complete this operation. Contact your fax administrator for more assistance"

First I have tried all sorts of searches and and all I come up with is things related to Windows Server 2008.
1. I have Fax Service running on my 2012 R2 File and Print Server.
a. It can send faxes from the logged in domain user
b. It does not need to receive faxes because we have another machine for that
2. I have added the domain user I am using on the Windows 7 machine to the Accounts List in Fax Manager
3. I can not seem to find any logging saying that there is a security problem (Event Log, etc...)
Please point me in the correct direction as I need to have my staff use Print to Fax from our Practice Management Application.

Hi Shawn,
à
You do not have permissions to complete this operation. Contact your fax administrator for more assistance
From the error message, please check if share the Fax on the server. Meanwhile, please also check if assign
correct permissions in Security tab under Fax properties.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu
1. Fax Sharing is enabled and can see the Shared Fax Printer on other machines.
2. At least 2 domain groups that the Windows 7 user is in are in the Security Section, set to be able to fax. One othem can manage fax.

Error while creating PO -- Unit of measure not defined for lanuage ZH

Hi all,
i have created the PR with EA as UOM. Then while creating PO, i am getting error like
' Unit of measure not defined for lanuage ZH' .
Then I execute CUNI
Then menu is GOTO > Translation > units of measure
enter source language and target language . After this i am getting the below message
---> Language not available on server
Please suggest what i should do. Thanks.
Thanks
pabi

HI Pabi,
Go to material master for material in purchase requisition, the Go to Additional data and maintained language as ZH in material master data.
Also the other possibility, that if in your case purchase requisition are converted to purchase orders through background jobs,
then check the background job execution in SM37 whether that background job has been triggered twice parellely in the background, which could have resulted in locking of same purchase requisition at same time and hence your are getting the Error.
Br,
Tushar

Unit of measure not defined for language ZH

Hi,
We were creating a PO when we encountered the error which states "Unit of measure not defined for language ZH".
We executed CUNI to translate the units of measurement to our target language. System prompted "This object was segmented. Only new lines evaluated." What does this mean?
We tried creating the PO again, however we encountered the same error that the unit of measure was not defined for the language.
Please recommend action/s that we should take. Thank you.

Take a look at the below threads. Your problem has the solution.
Re: Unit of measure XX not defined for language DE
Re: Unit of Measure Error in Purchase order

MO: Operating Unit Non Usable Operating Unit for Multi-Org Conversion

Similar Messages

Maybe you are looking for