Modelbinding: bind a field of a structure

Hello,
i try to bind a field of a structure in an input field. My code looks like this:
<htmlb:inputField id="kalktxt" value="//model/kalk_h.kalktx" />
When i try to enter the site, i get a Business Server Pages Error:
Hinweis
Folgender Fehlertext wurde im System prozessiert:
Ungültiges Format
Without modelbinding the text is shown in the inputfield:
<htmlb:inputField id="kalktxt" value="<%=model->kalk_h-kalktx %>" />
What's the mistake?

Hi,
Pls check the data type in your mapping file and data type in table. It might be mismatched.
thanks

Similar Messages

Length of a field in a structure

Hi,
Is there any restriction on the length of the field in a structure which is CHAR type ??
Thanks.

Sample
report zrich_0001
       line-size 1023.
data: begin of s,
      a(65510) type c,
      b(25) type c,
      end of s.
      s-a = 'This is field 1 asdfkljas;dfkja;sldkjf;aslkdjf;alskdjfa' &
            'asdfkajsd;kfjas;dlkfj;aslkdjf;alksjdf;lkasjdf;lasdfasdf' &
            'asdfkljas;dlkfj;askdjf;askjdf;lkasdjf;lkasj thd end'.
      s-b = 'This is field 2'.
      Write:/ s-a.
      write:/ s-b.
Regards,
Rich Heilman

Bind multiple fields to one node in data view

I have a need to have an interactive form where data from a single data source is displayed in multiple fields on the form. In addition these fields are open for input. I have bound the multiple fields on the form to one node in the data view. The data is being displayed in the multiple fields. This form is being routed thru workflow so various agents are updating the form. The problem that I am having is that the form only seems to allow input in the first field on the form but not the other fields that are tied to the same data source. For example, field A and field B are bound to node SUMMARY. I can add/change/delete data in field A but not in field B. After I have done some entry in field A, I can then sometimes make changes in field B. We have a requirement that field A be enabled for agent #1 but field B is invisible. Later in the workflow, agent #2 needs to make final changes on a "summary" page so agent #2 had field B enabled.
Does anyone have any idea how to correct this data entry issue so that data can be entered into either field that is tied to a single node?

Having multiple fields in the backend is not an option. I will not go into the business reason in detail but the last page of the form contains a final version of data pulled from various locations on the form where the data on the other pages was input by multiple agents in the process flow. The last agent in the workflow needs to put the "finishing touches" to the data and should not have to search all over in the form to find the appropriate data fields.
I have found 2 possible solutions and would like to know if anyone can recommend one over the other.
First solution - bind multiple fields on the form to one node in the data view. This seems to work correctly on the form and data can be entered into either field, with the data being passed back to the webdynpro context in the one node in the data view (corresponding node in WD context).
Second solution - the node/attribue in the WD context must have the same name as a DDIC element. The node in the data view must have this same name. The field names on the form must also have the same name. Define the binding for the field names as Global. I have not validated that the data is passed back to the WD.

Problem in Add/Delete fields in Extract Structure.

Hi All,
When I want to delete some fields from the extract structure it gives me " " error.
Steps:
1. In R/3, T-Code LBWE -> Browse till DS ( ex: 2LIS_02_ITM)
2. Inactive the DS by clicking on 'Active' under Update column
3. Click on 'Maintenance' link under Structure column.
4. Remove a field MCEKKO-KUNNR from left side to right side of the window.
5. Click on continue button.
It gives the below error while generating the extract structure.
"MC03BF0" must be a flat structure. You can not use internal tables, strings,references, or structures as components.-
Plz help how to handle this error ? The same error msg is displayed if I want to add few fields to the structure.
Thanks in Adv

refer steps here:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0af763b-066e-2910-a784-dc6731660f46

How to Identify a table name of a field in the structure

Hi Guys,
I have to identify a application table name of a field , the field is directly mapped with the structure.
please guide me where the physical data is stored.
regards
Vasanth

HI Vasanth,
You can select Data Type radio button in SE11 and click on search help F4) ..and provide field name or structure name and then select where Used list option .and select table check box..so that you can find multiple tables wherever this structure is used..
U can get multiple tables here if this structures is used for multiple tables.So data related to your field will be storing in multiple tables.
This information may be usefull..
--Manohar

Need to add one field in standard structure???

Hi Experts,
I wanted to add one Z-field in standard structure. Anybody will suggest me how to do that step by step??

open the table in se11 and press append structure in application tool bar
press create button on pop up window.
give the append name and include the fields u required.
Yes, you can add the extra fields to the standard table.
Create Z-Structure with the fields needed and append the structure to the standard table by using the option append structure within table display
we can enhance the standard tables by using Append structures and customizing includes.
Append structures allow you to attach fields to a table without actually having to modify the table itself. Table enhancements using append structures therefore do not have to be planned by SAP developers. An append structure can only belong to exactly one table.
In contrast, CI_includes allow you to use the same structure in multiple tables. The include statement must already exist in the SAP table or structure. Table enhancements using CI_includes do, however, have to be planned by SAP developers
regards.
Rahul
reward if useful

How to fill a new field in communication structure KOMPAZD

Hi,
I have added a new field ZKNRZE to structure KOMPAZD. It should be filled with the partner payer (KOMK-KNRZE) How can I fill this field? Which user-exit do I have to use?
Thanks and regards.

Hi Carmen Alvarez,
You should use the USEREXIT_PRICING_PREPARE_TKOMP (module pool SAPLV60A, program RV60AFZZ) to move the value.
Thanks,
Mariano.

How to declare a field in a structure and table

Hi, I have a doubt in declaring a field inside a structure.
types: BEGIN OF mrm_rbkpv.
INCLUDE STRUCTURE rbkp_v.
types: h_rbws LIKE rbws OCCURS 0,
end of mrm_rbkpv.
data : e_rbkp_v type mrm_rbkpv.
Now I want I to refer to field WT_WITHCD inside table H_RBWS.
eg : if e_ebkp_v-h_rbws-wt_withcd = 'X ' is right or wrong??????
POints will rewarded
Thanks in advance

hi jaysree,
types: BEGIN OF mrm_rbkpv.
INCLUDE STRUCTURE rbkp_v.
types: h_rbws LIKE rbws OCCURS 0,
end of mrm_rbkpv.
data : e_rbkp_v type mrm_rbkpv.
if e_ebkp_v-h_rbws-wt_withcd = 'X ' - > this will work perfectly.
rgds
anver
if hlped mark points

Target file name as field in target structure

Hi SDNers,
I have a requirement where I need to populate a field in target structure with the target file name, this will be a counter.
So if the interface is run 2 times already the third file should have name XXXXXXX_03 and also this needs to be mapped to a field in the target structure.
Any ideas on how to achieve this?
(Pls Note: I am aware of ASMA and variable substitution)
Regards,
Gautam Purohit

Hello Gautam!
File adapter - How to pass File name and path at runtime
This SDN topic probably covers the requirement you mentioned!
BR,
Lucas

How to read fields of a structure or Table.

Hi,
I had a requirement where i will send a structure/table name into a Form(Subroutine). This form fills an internal table with all the fields in that structure/table .
      Does any one could suggest any programming method to access the field names of structure/table.
      Please don't suggest any database tables, as the structures iam going to send need not exist in database.
     A quick reply is appreciated.
Thanks in Advance,
Anvitha.

HI Anvitha,
You can use function REUSE_ALV_FIELDCATALOG_MERGE to get the field names and attributes.
REPORT test.
TYPE-POOLS : slis.
DATA : BEGIN OF itab1,
       f1     LIKE vbak-vbeln,
       f2     LIKE vbap-posnr,
       f3     LIKE vbak-netwr,
       END OF itab1.
DATA : rep TYPE sy-repid      .
DATA : fcat TYPE slis_t_fieldcat_alv.
rep = sy-repid.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
   i_program_name               = rep
   i_internal_tabname           = 'ITAB1'
I_STRUCTURE_NAME             = 'ITAB1'
   i_client_never_display       = 'X'
   i_inclname                   = rep
I_BYPASSING_BUFFER           =
I_BUFFER_ACTIVE              =
CHANGING
    ct_fieldcat                  = fcat
EXCEPTIONS
INCONSISTENT_INTERFACE       = 1
PROGRAM_ERROR                = 2
OTHERS                       = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
the internal table fcat will have field names and attributes of internal table.
Reagrds,
Gagan

F4 help for a customer defined field added as structure enhancement

I am trying to get the F4 help on a customer defined field added as structure enhancement. This can be achieved by programming the "F4IF_INT_TABLE_VALUE_REQUEST" (as I have data in an internal table) in the Process On Value-Request event. The problem is because it is a customer field addition as structure enhancement. I am not sure where I should put this code segment to make it work. Any help would be highly appreciated.

Could you create a search help and attach that to the data element of your field, and then populate the data using code in the function exit of your search help if it cannot be directly read from a table or view?
This would remove your code from the SAP dialog program. The only mod you may need to make is to add / flag the search help on the screen field.
Andrew

Adding field to repository structure leads to syntax error in webservice

Hello there,
I have added a field to a structure that is used as a parameter type in a customer function module which is part of a function group which is the endpoint of an enterprise service.
I would have expected the webservice where this structure is used to have been updated automatically. But no: When I check the service definition, I get an error message that the type is missing the new field. And sure enough, in the types tab of the service definition (in se80) the new field has not been added to the type (listed under "original types"! - which is kind of misleading, as obviously it is not identical to the repository type any longer).
I'm at a loss here - how can I update the service definition and publish a corrected wsdl file, which includes the added field in the type description? I have looked many places in se80 and soamanager and sproxy, but to no avail. Must I delete and re-create the entire enterprise service?
This is in SAP Netweaver 7.01 and no XI.
-- Sebastian
Edited by: Sebastian Millies on Jul 8, 2010 11:36 AM
unmarked as a question, because answered in [this thread|The specified item was not found.;. Sorry I saw this too late. Anyway, when using the "check" button, a dialog pops up asking whether the service should be updated. (This seemed not to happen when I was using the "check" context menu entry, by the way, but I cannot now exactly reproduce the condition).

Hi,
MAke sure there are no entries for application 03 in LBWQ, if you are using Queue delta update mode.
Make sure there are no entries for application 03 in Sm13, if you are using V3 unserialzied update mode.
You can do this by running collective run for applicaiton 03 in LBWE.
And also make sure there are no entries in RSA7 for DS 2LIS_03_BF.
Regards,
Anil Kumar Sharma .P

Adding fields from KOMK structure to screen painter.

Hello Everyone,
i have created an Extra tab(like ADDITIONAL DATA B) using BADI, i have added fields from VBAP table, its working fine. But when i add fields from KOMK structure(KOMK-STCEG) only empty field is showing. Do i need to code something in PBO or PAI?
Thanks & Regards,
NarsiReddy Cheruku.

Hello NarsiReddy,
I assume that you have linked the field KOMK-STCEG using "Get from Dictionary" option from your above screenshot.
In PBO section, make sure to write the logic to update the value in the field. The logic which you would build, would be based on your requirement. For instance, you can use BELNR to check and its corresponding STCEG could be found in the structure KOMK.
But if the KOMK structure itself is not filled with any value, then there is some problem with your code. Try to check your BADI and its corresponding structures which would get updated at runtime and use them appropriately.
Thank you.
Regards,
Naresh

Field symbols to structures

when a run time error occurs using field symbols of structures to data objects corresponds to alignment.?
please explain with an example.

I think it would be better for you to explain what you are doing and what the runtime error is all about.
Because: 'field symbols of structures to data objects corresponds to alignment' doesn't ring a bell for any of us obviously.

Blank in decimal field of a structure.

Hi,
I wish to show no 0 value in a field of a structure defined as decimal. At the moment I have a value zero but I prefer no value if this field has zero value.
Any idea?
Thanks in advance for your help.
Regards,
Giovanni

Hi,
I do not display this field using write abap command but I wish to view blank value (no 0.00 value) in debugging mode because this is la output value viewed.
Maybe this is not possible or I can use "Currency/Quantity Field".
For example if I use CLEAR <linetable> and then I fill only some field on it the decimal fileds have no value.
Can I have this in my fields of my internal table defined as TYPE STANDARD TABLE OF <mystructure> INITIAL SIZE 0?
Thanks in advance.
Regards,
Giovanni

Modelbinding: bind a field of a structure

Similar Messages

Maybe you are looking for