Modify MB25 and add a new selection field

Hello All,
I need to copy MB25 to ZMB25 and add field to the selection  screen and modify the select statement further. MB25 uses a LDB and I am never used LDB. Please help me how to do this and post some notes on LDB as I have lot of questions.
<b>FYI:</b> I made a Z copy of the program and in the program attributes, I see a LDB. I made a Z copy of the LDB and added a selection field. I donno if that is the right way or not. I am also not sure where to modify the selection based on the newly added selection field.
Thanks in advance
Chandni Reddy

from SAP help :
If you define the selection criterion for a column of a database table that supports dynamic selections, the values entered on the selection screen are transferred to the logical database. There, they are treated as dynamic selections. The logical database does not read records from the database table that do not meet these selection criteria. This kind of selection is much more efficient than for database tables that are not designated for dynamic selections.
Besides, the input fields for the corresponding dynamic selection are displayed on the selection screen from the start. This spares the user from having to choose Dynamic Selections to display the corresponding screen.

Similar Messages

  • How to Add a new Selection Field in COPA Report

    Hi Gurus
    I'm new on SAP COPA reporting and I don't know how to solve this problem.
    I need add a new Selection-screen field (char1), not connected with any characteristic.
    This is necessary becuase if the user flag this field, when teh report is running I'll replace some key-figure values using the EXIT  
    ZXYEXF05. I don't find any instruction how to define this simple kinfd of variable, and use it into a Report.
    Thank-you in advance for your help.
    Claudio

    Hi
    I'll try to explain better my need.
    I've 10 CO-PA Key-Figures used to Split in the Cost of a material in different Cost Items.
    Using the customizing I fill these key-figures using some rules.
    The new requirement is use SOMETIME the same KF, by displaying different Costs overwritting the original values using the exit ZXYEXF05. But I need to know when the user wants consider the original value of KF, and when he wants overwrite these values (when I have to run teh exit). So I thought to create a new Selection-screen field (Char1), to permit to the user to pass to some report this user request. I thought to define a global variable, and add it to several reports when this feature is required.
    Can you suggest a better solution ???
    I could create some empty KF and fill them using teh exit, but I would prefer not expand the CO-PA structure.
    Thanks for help.
    Claudio

  • How to add a new selection field in an infoset

    Hi everyone,
    I have a problem changing an infoset when I add an additional field. This field is added to its respective field group.
    The problem is that after generate the infoset, I go to the transaction where the querys are made and the new field created has got only a checkbox in the column 'Output', while the column 'Selection' has no checkbox.
    This only happens with this field, while the rest of the fields have two checkbox in column 'Output' and in column 'Selection'.
    What can I do to make appear checkbox 'Selection' in order to make querys?
    Thanks in advance,
    Mayte

    Hi again,
    I have seen the threads about ad hoc querys but I'm still with the problem...
    I'm going to tell you the steps I follow.. Perhaps someone is able to tell me what I'm doing wrong...
    1. I go to S_PH0_48000513  transaction where I choose the infoset which I want to make queries..
    2. In sq02 transaction I click right button in 'additional fields' in the field group where I want to add the field. I click create and fill long text, header, type, length and like reference...
    3. Once the field is created I add the field in the 'field group' and generate the infoset
    4. In S_PH0_48000513 I can see that the field has been added with no checkbox 'Selection' but only with  checkbox 'Output'...
    I need checkbox 'output' and I don't know why doesn't appear...
    Thanks for your replies

  • Add new selection fields and ALV output  fields in VA05

    Hi,
    I want to add two new selection fields in VA05 'Further selection criteria' screen, also want to add some more fields in VA05 ALV output.
    Please help me how i can do it using user exit ?
    Thanks ,
    Archana

    hi,
    You have to copy the standard program SAPMV75A to ZSAPMV75A, change them accordingly.

  • How to add a new metadata field to iPhoto where new field is calculated as age in years and month based on a specific date and the date photo was taken ? I want to calculate and display the age of my two kids on every photo.

    Hi
    How can I add 2 new metadata-fields to every photo in iPhoto ?
    The new fields should state the age of my kids in years and months based on the date that they were born and the date that photo is taken.
    Exampel:
    My son is born 01.01.2010
    My daughter is born 01.01.2012
    Photo taken by data
    Aage of son
    Aage of daughter
    01.07.2011
    1 year 6 month
    not born yet
    01.01.2014
    4 year 0 month
    2 year 0 month
    I would like to be able to search by kids age and get the info displayed when doing slideshows.
    How to do this in iPhoto ?
    Any alternatives to accomplish the same ?
    Kind regards

    It can't be done with iPhoto.  There are some DAM (digital asset management) applications that can write to other IPTC fields that iPhoto can't read. One such app is Media Pro 1.
    However you would have to calculate the age for each date and add it to one of the fields. There are online age calculators that can do that for you: Age Calculators
    If you go thru that much trouble then use iPhoto, make the calculations and add the age to the Description field.  Then you can use Smart Albums to search for 1year 6 month text.
    OT

  • Hi All,How2 delete a pkey for std table and add 2 new primary keys

    Hi All,
            How2 delete a pkey for std table and add 2 new primary key fields .Please provide me the required procedure .
    Thanks&Regards.
    Bharat.

    Hi Bharat,
    First thing is you need to have the access key to change any standard dictionary object/standard programs/ standard transactions.You may get this from your basis person after getting approval from your respective manager.But changing or modifying the standard object is not recommended, but if there is no alternate to meet the business requirement then we have to follow this way only.
    Next, you need to check whether this table's primary key is being used in any other table as foreing key or not. If there is, then you must remove this relation and then you can delete the unncessary primary key field from that table.Finally you can add the two new fields and set them as primary key, save, check for any errors and activate.
    Hope this helps.
    Please reward if useful.
    Thanks,
    Srinivasa

  • ME59N new selection field

    Hi,
    I have a requirement to add new selection field in ME59N. Is there a way to code it via BADI or user exit? The BADI ME_PROCESS_PO_CUST only allows me to change the attributes of screen fields but not add a new one.
    Any suggestions would be appreciated. Thanks.

    Hi Jeremy,
    the only way to go is to follow what is described here...
    Re: Hos to make a filed to be required field when creating datasource
    Hope it helps!
    Bye,
    Roberto
    ...please, don't forget to reward the answers and to close your old no more useful threads...

  • Add a new selection option on VL71

    I want to add a new selection option on VL71.
    I know that I can do an implicit enhancement.
    But I am not sure if I can add it in the place as showed.
    If the enhancement cannot solve the problem, do I have to copy out a Z program.

    Dear Experts,
    In HUMO report, after the specail stock, We want add another selection field "Special Stock Number".
    Do we need to go for a development for this?
    Any alternate way available to get this done without much development involved?  Pls suggest.
    Regards,
    Shetty

  • Add a new key field in an InfoObject

    Hi all,
    I have to add a new key field in a standard InfoObject (0vendor) in order to extract data correctly from a table in R3 which has both the vendor and the plant as keys.
    Doubts:
    1. the 0vendor InfoObject is already used in several InfoCubes
    2. it contains data
    3. we have another object built with reference to 0vendor
    Any problem with the existent InfoCubes and queries if I change the structure of this InfoObject?
    Have I got to delete data on it first?
    any problem on the object built with reference to 0vendor?
    I have just thought of updating the object 0vendor (this would avoid lots of substitutions and lot of work) instead of developing a brand new object..
    Do you agree with this kind of solution or would you do something different?
    Thanks
    Elisa

    Hi Elisa,
    "In R/3 the vendor sub-range is blank and we use only one Purch Org, so no matter."
    This is OK but remind that it shall remain like this ALWAYS; because if you design your model with these assumptions and later you start getting sub ranges and/or a second P.O then you can forget your model...
    Replacing 0VENDOR by ZVENDOR completely will depend on your requirement; I don't know which content you are using but you should try to keep 0VENDOR as such because ZVENDOR will be compounded with 0PLANT and that's not the same... (e.g. the key will be displayed like "PLANT/VENDOR" in reports unless you drilldown the PLANT in front of ZVENDOR... your users may perhaps not appreciate...)
    In this matter, how are you going to proceed?
    - fill the vendor ID in ZVENDOR and have 0PLANT as compounding key? In this case you'll have to add 0VENDOR attributes in ZVENDOR as well. With this scenario you will end with redundant data since attributes for 0VENDOR will be the same for each combination 0PLANT/ZVENDOR.
    - wiser: have 0VENDOR and 0PLANT both in the compounding key. This way you could have ZVENDOR key CHAR1 and leave it empty (it would be a "dummy" key you wouldn't use in reports)
    The good thing here is that you don't have to replicate your 0VENDOR design in the ZVENDOR. the bad thing for you is that you NEED to keep both IObjs; thus manage your DIM issue.
    Your approach to fill the cubes is absolutely right! What are the sizes of your cubes?
    You should take this opportunity to check you cubes datamodel:
    - are the dimension well deisgned? (run report SAP_INFOCUBE_DESIGNS in order to see the cardinality of your DIMs). I am sure this can be improved.
    - are the cubes partitioned? Every cube should be partitioned for performance reasons.
    - if the cubes are huge, wouldn't it be good to do a logical partitioning? E.g have one cube per year and a multicube on top...
    Finally use dimension number range buffering when loading data into an empty cube and other techniques like dropping all indexes in order to speed up your load process and minimize reporting downtime. If your reports are based on multicubes and your model is not too complex you could even keep the copy cube instead of moving your data back to the original; you would then just have your multicube transport to make the switch of the new model available for reporting...
    hoping this help you to go with the right path...
    regards,
    Olviier.

  • Check 2 tables(Table A and Table B) and figure out new columns present in Table A and add these new columns to Table B

    How to check 2 tables(Table A and Table B) and figure out new columns present in Table A and add these new columns to Table b.
    DDL-
    Create table A
    ( A INT,
    B INT,C VARCHAR(2)
    Create table B
    A INT,
    B INT
    Any advice on the best approach or method to achieve this.
    I understand that I need to check the schema of the columns and then do a match between 2 tables and find new columns and then alter my target table
    Mudassar

    Can you try this..
    CREATE TABLE A ( A INT, B INT, C VARCHAR(2) )
    CREATE TABLE B ( A INT, B INT )
    Declare @ColumnVar nvarchar(128),@DatatypeVar nvarchar(128)
    SELECT @ColumnVar=x.COLUMN_NAME, @DatatypeVar=x.DATA_TYPE
    FROM INFORMATION_SCHEMA.COLUMNS AS x
    WHERE TABLE_NAME = 'A'
    AND NOT EXISTS ( SELECT *
    FROM INFORMATION_SCHEMA.COLUMNS
    WHERE TABLE_NAME = 'B'
    AND COLUMN_NAME = x.COLUMN_NAME )
    Declare @SQL VarChar(1000)
    SELECT @SQL = 'ALTER TABLE B ADD ' + @ColumnVar + ' '+ @DatatypeVar
    Exec (@SQL)
    select * from B
    Please Mark This As Answer if it helps to solve the issue
    http://stackoverflow.com/questions/2614101/alter-table-my-table-add-column-int

  • [svn:bz-trunk] 10059: update two package-info.java files, and add one new one.

    Revision: 10059
    Author:   [email protected]
    Date:     2009-09-08 11:31:48 -0700 (Tue, 08 Sep 2009)
    Log Message:
    update two package-info.java files, and add one new one.
    Modified Paths:
        blazeds/trunk/modules/proxy/src/flex/messaging/services/http/proxy/package-info.java
    Added Paths:
        blazeds/trunk/modules/core/src/flex/messaging/util/concurrent/package-info.java
        blazeds/trunk/modules/core/src/flex/messaging/validators/package-info.java

    Revision: 10059
    Author:   [email protected]
    Date:     2009-09-08 11:31:48 -0700 (Tue, 08 Sep 2009)
    Log Message:
    update two package-info.java files, and add one new one.
    Modified Paths:
        blazeds/trunk/modules/proxy/src/flex/messaging/services/http/proxy/package-info.java
    Added Paths:
        blazeds/trunk/modules/core/src/flex/messaging/util/concurrent/package-info.java
        blazeds/trunk/modules/core/src/flex/messaging/validators/package-info.java

  • How to add a new selection criteria in Automatic Payment process (F110)

    Hi all,
    We need to add new selection field in selection criteria tabstrip. Does a user-exit exist to interpret BKPF-USNAM as field name ?
    Thanks in advance for your answers.
    Regards,
    Philippe.

    pls look here
    enhancenents
    A.

  • My apple id email address is no longer valid. my current email address is recognised as my rescue email...i need to cancel old, change my current and add a new recue email...cant seem to be able too

    my apple id email address is no longer valid. my current email address is recognised as my rescue email...i need to cancel old, change my current and add a new recue email...cant seem to be able too

    How are you trying to do it ? You can change the rescue email address on your account by, from http://support.apple.com/kb/HT5312 :
    Navigate to appleid.apple.com using your web browser.
    Click "Manage your account"
    When prompted, sign in using your Apple ID and password.
    Click Password & Security
    You'll be asked to answer 2 of your 3 security questions before you can make any modifications. If you are unable to remember your answers, you can choose to send an email to your rescue email to reset your security questions.
    After you've validated your identity by correctly answering your security questions, click Edit to the right of your rescue email address.
    Once you've finished editing your rescue email address, click the Save button directly below the email field.
    You can then try using your current rescue email address as your primary email address - you may need to log out of that page and back in. Or you can then try changing the primary email address via the Store > View Account menu option on your computer's iTunes
    If you have an iPhone, iPad and/or iPod Touch you may then need to log out of your account on them by tapping on it in Settings > iTunes & App Store and log back in for the account to be 'refreshed' on it.

  • Is there a way to create form fields to tab into and type and or drop down selection fields in pages as you can with microsoft word?

    is there a way to create form fields to tab into and type and or drop down selection fields in pages as you can with microsoft word?

    No

  • Ive changed my apple id. in my iPad and iPhone under iTunes it's showing the new id but under iCloud still shows old I'd. I have been told to delete account and add in new one but worried in case lose all my stuff that's already saved in iCloud. any idea?

    Ive changed my apple id. in my iPad and iPhone under iTunes it's showing the new id but under iCloud still shows old I'd. I have been told to delete account and add in new one but worried in case lose all my stuff that's already saved in iCloud. any idea?

    If all you did was rename your ID, you can go to Settings>iCloud, tap Delete Account, choose Delete from My iPhone when prompted, then sign back in with your renamed ID.  Deleting the account only deletes the account and any data you are syncing with iCloud from your phone, not from iCloud.  Provided you are signing back into the same account and not changing accounts, your data will be synced back to your phone when you sign back in.
    If, however, you are changing to a new account with a new ID, choose Keep on My iPhone when prompted.  Then choose Merge when you sign into the new account and turn your iCloud syncing back on to upload your data to the new account.
    Before deleting the account, save you photo stream photos to your camera roll (tap Edit, tap all the photos, tap Share, tap Save to Camera Roll).

Maybe you are looking for