Modifying NTFS permissions on a Previous Version?
Hi,
I am attempting to restore a file from a previous version on a DFS server. I select a previous version, Open (same results with Copy or Restore), the window opens with the list of folders, but when I attempt to open anything, I get "Windows cannot
access \\localhost\D$.....".
Technically, the account I am using should have permission, but I believe the permissions are corrupt and did not apply completely when initially set up. I can go an fix the permissions on the original folder using icacls, but how do I correct
the permission on the previous version?
Thanks in advance.
J
Hi J,
What is the account you are used? If you want to restore a file from a previous version without correct permission, please try to the settings below to see if they are help:
1. Try to log on use the build in local administrator to restore.
2. You can turn off the UAC or you can revise the folder permission comparing the good folders.
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
Similar Messages
-
Can I modify the comment on a previous version?
With iFS 1.1.9.0.7 running on Win2K server, when I look at the history of a versioned
file using the WebUI interface, I can see all the previous versions, each one having its
own comment. There doesn't seem to be any way, using WebUI, to change the version
comment on any of the previous versions, but: is it possible to do this programmatically,
using the iFS API?
Thanks.Use this to locate the correct contact information for Apple:
http://www.apple.com/contact/
Bear in mind this is a user-to-user forum, however, Apple support reps occasionally post responses... however, if you desire direct support from Apple it is up to you to initiate the contact.
When you attempt to launch iTunes, do you receive any error messages, or does it simply not launch? If you receive an error, let us know what it is so we can better assist.
In the mean time, give these a shot:
http://docs.info.apple.com/article.html?artnum=302386
http://support.apple.com/kb/HT1275
http://docs.info.apple.com/article.html?artnum=93313
CG -
My husband received a message saying that there was an upgrade for FF Mozilla, so he proceeded to upgrade. After doing so he received a message saying we didn't have permissions. I took the laptop to the Geeks at Best Buy and was told that it was a software issue. We just want to get back to our previous version but can't do that either.
Do a clean (re-)install:
* Download a fresh Firefox copy and save the file to the desktop.
* Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Do not remove personal data if you uninstall the current version.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
* http://kb.mozillazine.org/Profile_backup -
NTFS Permissions - Need Read, List, Delete not Write or Modify
I don't think you can have delete, but not write or modify.
I'm setting up Network printing to a shared folder on a server. I want the users to be able to browse and see the files the printer's scan there and delete them when moved off. I don't want the folder to be used for long term storage so I don't want write or modify on it (ie user opens a scaned file makes changes and just clicks save). How do I go about setting this up with NTFS permissions?
This topic first appeared in the Spiceworks Community -
Most efficient/quickest way to set NTFS permissions in PowerShell
Hello all,
Trying to figure out what the most efficient/quickest way to set NTFS permissions via PowerShell is. I am currently using ICACLS but it is taking FOREVER as I can't figure out how to make inheritance work with this command.
This has prompted me to begin looking at other options for setting NTFS permissions in PowerShell, and I wondered what everyone here likes to use for this task in PowerShell?Ah ok. Unfortunately, my ICACLS is taking FOREVER. Here is the code I'm using:
ICACLS "C:\users\[user]\Desktop\test" /grant:r ("[user]" + ':r') /T /C /Q
However:
1. I can't figure out how to make the inheritance parameter work with ICACLS
2. If I do make the inheritance parameter work with ICACLS, I still need a way to add the permission to child objects that aren't inheriting.
Any tips on how to improve performance of ICACLS?
1. icacls folder /grant GROUPNAME:(OI)(CI)(F) (i will post corrected code later, this works in CMD but not powershell couse of bracers)
2. get-childitem -recurse -force |?{$_.psiscontainer} |%{icacls ....} (or u can list only folders where inheritance is disabled and apply icacls just on them)
I think jrv and Mekac answered the first question about inheritance flags. I would just add that you probably don't want to use the /T switch with icacls.exe because that appears to set an explicit entry on all child items (that's probably why it's taking
so long).
For your second question, I'd suggest using the Get-Acl cmdlet. It throws terminating errors, so I usually wrap it in a try/catch block. Something like this might work if you just wanted the paths to files/folders that aren't inheriting permissions:
dir $Path -Recurse | ForEach-Object {
try {
Get-Acl $_.FullName | where { $_.AreAccessRulesProtected } | ForEach-Object { Convert-Path $_.Path }
catch {
Write-Error ("Get-Acl error: {0}" -f $_.Exception.Message)
return
If you're looking for speed/performance, you don't want to just use the PowerShell Access Control (PAC) module that Mike linked to above by itself. It's implemented entirely in PowerShell, so it's incredibly slow right now (unless you use it along with Get-Acl
/ see below for an example). I'm slowly working on creating a compiled version that is much faster, and I think I'm pretty close to having something that I can put in the gallery.
Since I wasn't sure which command would give you the best results, I used Measure-Command to test a few different ones. Each of the following four commands should do the exact same thing. Here are my results (note that I just ran the commands a few times
and averaged the results on a test system; this wasn't very rigorous testing):
# Make sure that this folder and user/group exist:
$Path = "D:\TestFolder"
$Principal = "TestUser"
# Native PowerShell/.NET -- Took about 15 ms
$Acl = Get-Acl $Path
$Acl.AddAccessRule((New-Object System.Security.AccessControl.FileSystemAccessRule(
$Principal,
"Read", # [System.Security.AccessControl.FileSystemRights]
"ContainerInherit, ObjectInherit", # [System.Security.AccessControl.InheritanceFlags]
"None", # [System.Security.AccessControl.PropagationFlags]
"Allow" # [System.Security.AccessControl.AccessControlType]
(Get-Item $Path).SetAccessControl($Acl)
# PAC Module 3.0 w/ PowerShell/.NET commands -- Took about 35 ms
$Acl = Get-Acl $Path | Add-AccessControlEntry -Principal $Principal -FolderRights Read -PassThru
(Get-Item $Path).SetAccessControl($Acl)
# icacls.exe -- Took about 40ms
icacls.exe $Path /grant "${Principal}:(OI)(CI)(R)"
# PAC Module 3.0 w/o Get-Acl -- Took about 350 ms
Add-AccessControlEntry -Path $Path -Principal $Principal -FolderRights Read -Force
Unless I messed something up, it looks like the native PowerShell/.NET commands are faster than icacls.exe, at least for modifying a single folder's DACL. -
Now the previous version won't open. I downloaded and tried to instal 6.0 without software update, which failed, and my old 5.5.3 Airport Utility still won't open.
iTunes no longer recognizes my airport express.
Error Message:
None of the selected updates could be installed.
An unexpected error occurred.
Can't delete Airport Utility and reinstal from scratch as it is, “AirPort Utility” can’t be modified or deleted because it’s required by Mac OS X.
Any sugestions?I reinstalled AirPort 5.5.3 which worked, but the app still won't launch but iTunes now recognizes my AirPort Express, I just hope I don't want to change its settings.
-
I have multiple Windows Server 2008 R2 machines in which I am attempting to do an in place upgrade to 2012 R2, and it is repeatedly failing.
Setup gets all the way through, and it says Getting ready, followed immediately by an error saying: Setup can't continue. Your computer will now restart, and your previous version of Windows will be restored.
I am attempting to install:
Windows Server 2012 R2 Datacenter (Server with GUI)
x64 Date modified 3/18/2014
I have found several posts, many discussing how disk space can be an issue, I have increased disk space so it shouldn't be an issue. I have also made sure the only only partition on disk 0 is C: and system reserved.
I have disabled all unessential services and went through and removed all unessential applications, and extras. Still getting the error.
Here is the update log
2014-11-24 08:20:20:715
888 ed8
AU AU initiates service shutdown
2014-11-24 08:20:20:715
888 ed8
AU ########### AU: Uninitializing Automatic Updates ###########
2014-11-24 08:20:20:840
888 ed8
Report CWERReporter finishing event handling. (00000000)
2014-11-24 08:20:20:840
888 ed8
Service *********
2014-11-24 08:20:20:840
888 ed8
Service ** END ** Service: Service exit [Exit code = 0x240001]
2014-11-24 08:20:20:840
888 ed8
Service *************
2014-11-24 08:23:27:265
892 9a0
Misc =========== Logging initialized (build: 7.6.7600.320, tz: -0500) ===========
2014-11-24 08:23:27:281
892 9a0
Misc = Process: C:\Windows\system32\svchost.exe
2014-11-24 08:23:27:281
892 9a0
Misc = Module: c:\windows\system32\wuaueng.dll
2014-11-24 08:23:27:265
892 9a0
Service *************
2014-11-24 08:23:27:281
892 9a0
Service ** START ** Service: Service startup
2014-11-24 08:23:27:281
892 9a0
Service *********
2014-11-24 08:23:27:635
892 9a0
Agent * WU client version 7.6.7600.320
2014-11-24 08:23:27:635
892 9a0
Agent * Base directory: C:\Windows\SoftwareDistribution
2014-11-24 08:23:27:635
892 9a0
Agent * Access type: No proxy
2014-11-24 08:23:27:635
892 9a0
Agent * Network state: Connected
2014-11-24 08:24:14:827
892 9a0
Report CWERReporter::Init succeeded
2014-11-24 08:24:14:827
892 9a0
Agent *********** Agent: Initializing Windows Update Agent ***********
2014-11-24 08:24:14:827
892 9a0
Agent * Prerequisite roots succeeded.
2014-11-24 08:24:14:827
892 9a0
Agent *********** Agent: Initializing global settings cache ***********
2014-11-24 08:24:14:827
892 9a0
Agent * WSUS server: <NULL>
2014-11-24 08:24:14:827
892 9a0
Agent * WSUS status server: <NULL>
2014-11-24 08:24:14:827
892 9a0
Agent * Target group: (Unassigned Computers)
2014-11-24 08:24:14:827
892 9a0
Agent * Windows Update access disabled: No
2014-11-24 08:24:14:951
892 9a0
DnldMgr Download manager restoring 0 downloads
2014-11-24 08:24:14:981
892 9a0
AU ########### AU: Initializing Automatic Updates ###########
2014-11-24 08:24:14:997
892 9a0
AU # AU disabled through Policy
2014-11-24 08:24:14:997
892 9a0
AU # Will interact with non-admins (Non-admins are elevated (User preference))
2014-11-24 08:24:15:043
892 9a0
AU Initializing featured updates
2014-11-24 08:24:15:043
892 9a0
AU Found 0 cached featured updates
2014-11-24 08:24:15:397
892 9a0
Report *********** Report: Initializing static reporting data ***********
2014-11-24 08:24:15:397
892 9a0
Report * OS Version = 6.1.7601.1.0.196880
2014-11-24 08:24:15:397
892 9a0
Report * OS Product Type = 0x00000007
2014-11-24 08:24:15:428
892 9a0
Report * Computer Brand = VMware, Inc.
2014-11-24 08:24:15:428
892 9a0
Report * Computer Model = VMware Virtual Platform
2014-11-24 08:24:15:428
892 9a0
Report * Bios Revision = 6.00
2014-11-24 08:24:15:428
892 9a0
Report * Bios Name = PhoenixBIOS 4.0 Release 6.0
2014-11-24 08:24:15:428
892 9a0
Report * Bios Release Date = 2013-07-30T00:00:00
2014-11-24 08:24:15:428
892 9a0
Report * Locale ID = 1033
2014-11-24 08:24:15:582
892 9a0
AU Successfully wrote event for AU health state:0
2014-11-24 08:24:15:582
892 9a0
AU Successfully wrote event for AU health state:0
2014-11-24 08:24:15:582
892 9a0
AU AU finished delayed initialization
2014-11-24 08:24:20:865
892 6a0
Report CWERReporter finishing event handling. (00000000)
2014-11-24 08:55:38:187
892 9a0
AU AU initiates service shutdown
2014-11-24 08:55:38:187
892 9a0
AU ########### AU: Uninitializing Automatic Updates ###########
2014-11-24 08:55:38:250
892 9a0
Report CWERReporter finishing event handling. (00000000)
2014-11-24 08:55:38:297
892 9a0
Service *********
2014-11-24 08:55:38:297
892 9a0
Service ** END ** Service: Service exit [Exit code = 0x240001]
2014-11-24 08:55:38:297
892 9a0
Service *************
Any ideas on how I can resolve this, or further troubleshoot?I also had this error: "Setup cannot continue. Your computer will now restart, and your previous version of Windows will be restored."
trying to do a in-place upgrade of a Domain Controller Windows 2008 R2 to Windows 2012 R2.
The problem was the separated System Reserved Partition. After I removed using this instructions:
http://jacobackerman.blogspot.com/2012/12/how-to-remove-system-reserved-partition.html
The upgrade ran ok, and now have my DC as Windows 2012 R2.
Hope that helps!. -
Images (actually graphics) loaded fine in the previous version of firefox, but now do not open in firefox 5. It is our business' website. it opens and looks fine in explorer and other browsers. However, please goto www.trinitystone.biz (using Firefox 5)and look at how the top menu bar has a black box surrounding it and the bottom menu also has this black bar. It is not supposed to be there, if you view the site from IE, you will see what it is supposed to look like. Any help would be appreciated! Thanks
You can modify the pref <b>keyword.URL</b> on the <b>about:config</b> page to use Google's "I'm Feeling Lucky" or Google's "Browse By Name".
* Google "I'm Feeling Lucky": http://www.google.com/search?btnI=I%27m+Feeling+Lucky&ie=UTF-8&oe=UTF-8&q=
* Google "Browse by Name": http://www.google.com/search?ie=UTF-8&sourceid=navclient&gfns=1&q=
* http://kb.mozillazine.org/keyword.URL
* http://kb.mozillazine.org/Location_Bar_search -
Delete Previous Version - file associations
Have a question on file association problems when deleteing previous version of PS.
For example user bought CS5 and installed. File Associations now changed by defauilt to CS5.
If user un-installs CS4, the file associations now revert back to CS4, even though that version is not on computer.
Changing file associations is Bridge and in the OS does not solve file association problem.
One either has to uninstall PS and wipe Adobe files, then re-install latest version, or go into OS registry and make changes. Registry changes can be difficult for many.
I am sure when CS6 is released we will again have this same scenero, as outlined above, repeated unless the code has been changed.
The question is: In CS6 will this bug have been eliminated?Just because it's happend to multiple people doesn't make it not machine or user specific (a problem with user permissions on one computer can happen on another as well). I've never seen this behavior on any of my systems and I have to install and uninstall random versions of the software all the time. The most recently installed version of the software should always have the file type associations, regardless of what versions have been removed.
Have you been able to reproduce the issue on your own machine during testing? -
How do I continue to save for previous version?
Hello. I am currently using LabView 9.0 32-bit, Windows 7. Unfortunately, my university uses Labview 8.6.1 32-bit, Windows Vista Business. First, I tried to open my VI's which I started at the University and modified on my machine back on a university machine. I received an error stating that the files were saved with a newer version of LabView and could not be opened. I went home, and opened the VI's again and used File > Save for Previous Version. This is okay, except it forces me to create a new destination folder. When I close LabView and open the VI's from this destination folder, they open up automatically with an asterisk to indicate the files have changed and require saving. Obviously this is automatically converting my 8.6 files to 9.0. This is very frustrating.
How can I force LabView to stick with the version that the files were created or saved as? If I attempt to save the "asterisked" files for previous version, it refuses to let me. Thank you for your time and consideration.You must be doing something wrong, or perhaps Windows 7 is interfering. Here's the step-by-step process:
Launch LabVIEW 2009.
Open an 8.6 VI. It should show up with an asterisk in the title bar.
Make some changes.
Select File -> Save for Previous Version.
Verify that "8.6" is selected in the dropdown.
Click "Save...".
In the dialog click the "Save" button to accept the default of saving the VI into a new folder called "<VI Name> Folder".
Close the VI. When asked if you want to save changes click "Don't Save".
Check the timestamp on the newly created file in that folder.
Open the same 8.6 VI again.
Make some changes.
Select File -> Save for Previous Version.
Verify that "8.6" is selected in the dropdown.
Click "Save...".
The "File name" textbox should have the same default name as previously. If you click "Save" Windows should move you into that folder, and the save dialog should remain open. The file listing should contain the VI.
Click on the "Current Folder" button. You should get a dialog warning you that the operation will save over existing files. Click "OK" to continue. The VI will be saved as the previous version over the previous save that was done. To verify this, check the timestamp on the file.
I just did the above on LV2009 running under XP just so I could get the button names correct.
You can repeat steps 10-16 as many times as you want without needing to create a new folder. -
Date in WebProxy Server 3.6SP7 or previous versions missing?
Hi everybody.
I don't know if this product is valid to answers, but I will do my question in this forum:
I installed iPlanet Web Proxy Server 3.6 SP7 in Solaris. When I run a telnet command to connect to default port 8080, and I write the next instruction
get / http/1.1
and a couple of RETURN, I see the next banner:
root@testserver # telnet localhost 8080
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
get / http/1.1
HTTP/1.1 200 OK
Proxy-agent: iPlanet-Web-Proxy-Server/3.6-SP7
Date: Thu, 09 Jun 2005 18:59:52 GMT
Accept-ranges: bytes
Last-modified: Thu, 09 Jun 2005 18:58:20 GMT
Content-length: 760
Content-type: application/x-ns-proxy-autoconfig
Why I see date in GMT timezone, when my system has fine date and time? My timezone in the operating system is GMT-5. The banner is similar under previous versions of this product.
Thanks for any comments. Bests regards.
Sergio.Sergio,
Complicated....The http RFC (rfc2616) section 14.18 states that dates MUST be send in a standard format (RFC 1123 section 5.2.14). However, it only states that the response should include the timezone. So in this case, the time on your reply is right (since it also specifies the timezone).
But, to complicate things further, this points to RFC 822 that indicates that hosts should can use time zones, or Universal Time...but it also permits Universal Time to be referenced as GMT.
So to answer your question, the proxy is sending the correct time (just not the timezone your were expecting). And the browser will handle that properly when making cache calculations. And lastly, your proxy logs WILL show up in local time if you specify the correct timezone on your server, and specify the "[%SYSDATE%]" variable in your log format. (Server Status --> Log Preferences --> System date)
-rich -
Re Importing Previous versions of Object / Namespaces in Integration Rep
Hi I have the following scenario.
I have exported my namespace as a tpz file from the XI Dev system. And then I make some changes to some objects in the same namespace . But I want the previous version (previously exported tpz file ) back . So when I try to import the previous tpz file back into the integration repository , I am able to do this activity sucessfully but no changes of the previous version are applied . The current version is still present in the namespace .
And a strange thing is happening . The 2 Object Attributes in the Display Software Components Version Page "Objects are orignal Objects" and "Objects are modifiable" are unchecked now for the SWCV .
But when I exported the previous version they were checked. I am not sure what is happening . Can any one please suggest .
thanks
regards
NileshHi,
*You want to get back to the previous version.
If you have exported the very first verion creating a .tpz file then follow these few steps :
first export the current namespce.
Delete the current Namespce.
Import the previous version or the very first version of the namespace which you ,, you can trace it by the date&time stamp patched to it.
Activate the new namespace.
*the object are checked as because of the security reason.
there is absolutely no problem in that, these are unchecked so that no one will be able to edit it manually with the proper transport which you can see in production/ quality environment.
Hope this will help.
Assign point if help
Thanks,
JAY -
I am using xmlhttprequest to send image in cross domain. in Previous version it was working fine, but on "7.0.1" version request doesn't contain x-file-name and x-file-size data.
Request Header of version mozilla 7.0.1
[Host] => localhost
[User-Agent] => Mozilla/5.0 (Windows NT 5.1; rv:7.0.1) Gecko/20100101 Firefox/7.0.1
[Accept] => text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8
[Accept-Language] => en-us,en;q=0.5
[Accept-Encoding] => gzip, deflate
[Accept-Charset] => ISO-8859-1,utf-8;q=0.7,*;q=0.7
[Connection] => keep-alive
[If-Modified-Since] => Mon, 26 Jul 1997 05:00:00 GMT
[Cache-Control] => no-cache, no-cache
[X-Requested-With] => XMLHttpRequest
[Content-Type] => multipart/form-data-
[Referer] => http://localhost/ajay_upload/tpl_upload_test_default.php
[Content-Length] => 31082
[Pragma] => no-cache
Request Header of same code on Chrome:
Array
[Host] => localhost
[Connection] => keep-alive
[Referer] => http://localhost/ajay_upload/tpl_upload_test_default.php
[Content-Length] => 188742
[Cache-Control] => no-cache
[Origin] => http://localhost
[X-File-Size] => 188742
[X-Requested-With] => XMLHttpRequest
[If-Modified-Since] => Mon, 26 Jul 1997 05:00:00 GMT
[X-File-Name] => 2.jpg
[User-Agent] => Mozilla/5.0 (Windows NT 5.1) AppleWebKit/535.1 (KHTML, like Gecko) Chrome/13.0.782.218 Safari/535.1
[Content-Type] => multipart/form-data-
[Accept] => */*
[Accept-Encoding] => gzip,deflate,sdch
[Accept-Language] => en-US,en;q=0.8
[Accept-Charset] => ISO-8859-1,utf-8;q=0.7,*;q=0.3
Thanks In AdvA good place to ask advice about web development is at the mozillaZine Web Development/Standards Evangelism forum.<br />
The helpers at that forum are more knowledgeable about web development issues.<br />
You need to register at the mozillaZine forum site in order to post at that forum.<br />
See http://forums.mozillazine.org/viewforum.php?f=25 -
How do I save a type for a previous version of TestStand (4.0 -- 3.5)?
I have a number of step-types saved in a type file, in TestStand 4. I would like to use this file in TestStand 3.5. Is there any way of saving this file for TestStand 3.5. I have gone into each step-type and custom-type defined in the type file, and under the Version tab, selected the "Set earliest TestStand Version that can use this type", to 3.5.0.725. However, still this file is not openable in TestStand 3.5.
Thanks
Christopher Farmer
Certified LabVIEW Architect
Certified TestStand Developer
http://wiredinsoftware.com.auHi Manooch_H and Chris,
The 2nd suggestion would seems to be the route to take but doesn't seem to do what Manooch suggests. If you try to save a palette out as a previous version eg TS4.1 to TS3.5 then the WriteFile wants the compatibility version in the Compatibilty TS3.5 folder otherwise it generates an error.
"An error occurred calling 'Writefile' in PropertyObjectFile' of NI TestStand API 4.1. The compatibility type palette files for selected version could not be found"
Also you need to change the Path as it will overwrite the Current version. Again not what you want. Therefore, you can not seem to do what Chris wants to do because you need the compatibility version file to create the previous version type palette file. (Manooch, Maybe I doing something wrong...)
So the first option seems to be the only workable solution.
Point to bear in mind.
Adding Types to a SequenceFile Types then saving out to a previous version doesnt modify the Type fully if you dont have a compatibility file. ie Take the "Default Step Name Expression" of a Custom Step Type contains ResStr("CUSTOM_STEPTYPES", "DEFAULT_STEP_NAME").
This resource strings don't exist in Version 3.5 or lower and therefore when you load the SequenceFile into the previous version of TestStand eg TS3.5 it will generate an error.
Regards
Ray Farmer
Message Edited by Ray Farmer on 08-08-2008 09:24 PM
Regards
Ray Farmer -
Trusted certificates from your previous version of Adobe Reader were found.
After upgrading Adobe Reader from 10 to 11, some users are getting "Adobe Reader Security - Trusted certificates from your previous version of Adobe Reader were found. Would you like to import them." I need to know what registry settings we can modify to either set this automatically to "Import" or "Use Default" I need to add one of these options into our Adobe Reader Settings GPO that is using group policy preferences. This only appears for users who have data in C:\Users\%username%\AppData\Roaming\Adobe\Acrobat\10.0\Security and only the very first time the user opens Adobe Reader after the upgrade per user profile on a given server.
I'm not sure this is true: "If they don't exist then there is no dialog. " Could be, but I've never heard of it.
However, acrodata files perform a number of functions for several features, so removing them is unwise. Also, they will just come back when a user exercizes certain features.
Better to just turn off the feature with the supported preference.
Ben
Maybe you are looking for
-
Different DVD to iPod Video Converter Software for Mac?
Does anybody know about different DVD to iPod Video Converter Software for Mac besides QuikTime Pro? Thanks, AG
-
i put a password a long time ago, and i today my blackberry 8330 asked for it and i didnt know it and now it erased all my data how do i recover it back?
-
Keychain system cannot be found
There are several threads on this, and on my 2009 iMac running Mavericks I ran into many of the same obstacles to the standard remedies. I had a big crash when trying to update to Yosemite a few weeks ago (so I'm back on Mavericks), with lots of perm
-
How to apply style sheets to table layout
hi i want to apply styles to my table layout region, i gave style sheets which are in OAF myhtml\OA_HTML\cabo\styles but i dint find any changes in my table layout, can any give one give me an idea of how to do it....
-
In Iphoto, server doesn't support my username and password combination
In Iphoto, I can not mail directly out, error message says server doesnt support username and password--how do I fix this?