Modifying runtime fault before being thrown by the system

Hi,
I have a requirement, where i need to find out the spot, from where system throws the runtime faults(specifically RemoteFault and BindingFault) in BPEL, and somehow modify the data coming in the rumtime fault (IFaultRecoveryContext object).
Please let me know whether this is possible or not.
I am using SOA 10.1.3.3.
Thanks in advance.

Try the first two steps in this article.
Battery not charging, not being recognized, or losing charge
If that doesn't help, I'd recommend replacing the AC adapter. If it has a problem after that, it would sound like hardware failure in the laptop.
- Peter

Similar Messages

  • Ipod not being recognized on the system, not getting reset,retry,restore,..

    hi all
    my ipod is not being recognized on the system..
    i dont know wat is the problem
    i tried the 5 Rs thing and i didn't get any king of result..
    i dont know wat to do
    please someone who could find a solution for this please reply and send me the solutions
    thanks..
    bye.

    See this...
    Windows Does Not Recognize iPod
    btabz

  • Recommended configuration tasks before starting to use the system

    Hello,
    I am a real Mac Newbie, just got my first Macbook Pro ...
    On Windows-systems, there were several config-tasks that should be done at first done before doing anything with the system (data migration) ... like creating partitions ... generally speaking, tasks that cannot/shouldn't be done later.
    Are there any similar tasks, that should be done in the very beginning (besides software updates)?
    I also did a search in this discussion forum, but couldn't find anything. If I missed it, please let me now the link.
    Thanks in advance

    Like Roger says there aren't really any software-related "configuration tasks" that have to be done with a Mac, at all. Just use it, close it when you're done, and open it again when you want to use it again. Things are simpler on a Mac. I admit that it might take a little while to get yourself used to the idea, but you'll find its much better once you do.
    One thing I'd like to add is that it can be a good idea to calibrate the battery on your MBP just after you get it. This works in the battery a little and makes sure that you'll get the most accurate readings from the battery life menu.
    I can't really think of any tasks that have to be done when first getting a computer that can't be done later... Just enjoy the machine! And if you have any other questions, don't hesitate!
    --Travis

  • How to handle RunTime Faults which doesn't list under System Faults?

    Hi,
    I have a doubt regarding runtime faults in BPEL 1.1.In BPEL 1.1 some of the run time faults are categorised as system faults.So we can handle those run time faults
    using the faultname or namespace(http://schemas.oracle.com/bpel/extension) of system fault itself.But 'SublanguageExecutionFault' is a run time fault which doesn't list under system faults.
    So what namespace it belongs to?Can we use the same namespace of system fault for this kind of runtime faults ?
    Are any other runtime faults existing which don't have the same namespace of sytem faults?So how can we identify and handle those run time faults?

    You can create a role menu as remote enabled remote menu.
    The authority checks will happen on the remote side, also against objects which don't exist in the calling system as the music is on the other side.
    On the RFC client system side, you only need the parameter transaction to start the remote transaction in the remote system.
    See the documentation on SYST function module ABAP4_CALL_TRANSACTION.
    This is however a rather antiquated technology... it is more popular to use a SAP Portal or webdynpro applications for this sort of thing (the user does not notice the difference) or later versions of such integration such as Fiori UIs or imbedded links within the Business Client.
    I don't want to lean out the window too far, but the buggy phase of these new things is approaching an end and they are usable if you are on newer releases. Then you can pool the menu and use APIs for navigation and no more irritating S_TCODE checks.
    Cheers,
    Julius

  • SQLException(original cause) in throw new EJBException(SQLException) is being lost, when the remote exception is being thrown by the container (ejbStore()) in IPlanet. Works in WL and WS

    (IPlanet 6 - SP4)
    we have something like this in the EntityBean :
    ejbstore()
    try {
    myDAO.Update();
    catch(SQLException se)
    throw new EJBException(se);
    But in the SessionBean, where we set the detail (which
    causes ejbStore() to fire), I'm seeing a TransactionRolledBack exception with no trace of the
    original exception within it (The "detail" attribute
    too is null ). The same thing works in WL and WS.
    Any suggestions appreciated.

    Turn your checked exceptions into unchecked exceptions and retrieve the cause later:
    RuntimeException unchecked = new RuntimeException(checked);
    Throwable t = unchecked.getCause();Stephen

  • Portal runtime error: where can I find the system log?

    I got a portal runtime error. Like this:
    Portal Runtime Error
    An exception occurred while processing your request
    Exception id: 10:22_16/05/08_0007_13424550
    Where can I find the log file / more details?
    Thanks
    René

    Hello rene,
    2 ways for accessing log: 
    1) browse portal filesystem : \usr\sap\J2E\JC00\j2ee\cluster\<server instance>\log\
    2) use sap log applications
    I suggest you to use logviewer or visual admin(it contains logviewer) applications. It will display formated logfile and you will be able to filter on severity / User Name / date / .......
    if you are using visual admin, just connect with Visual Admin then browse to  <server name> / services / log viewer then  again <server name> \usr\sap\J2E\JC00
    j2ee\cluster\server0\log and then click on defaultTrace.trc
    it is pretty the same navigation when using logviewer
    Kind Regards
    Cedric Meyer

  • How do i prevent my open web pages from being deleted when the system is being restarted

    windows 7
    how

    Do you mean pages that are reopened in tabs via session restore?
    * http://kb.mozillazine.org/Session_Restore
    Make sure that you do not use [[Clear Recent History]] to clear the 'Browsing History' when you close Firefox.<br />
    If you use [[Clear Recent History]] to clear the 'Browsing History' when you close Firefox then restoring tabs from the last session ("Save & Quit" or "Show my windows and tabs from last time") doesn't work.

  • Modifying SOAP faults

    We'd like to include a bit of detailed information if a SOAP fault is generated by our Web services. Is there a good way to modify SOAP faults before returning them to the client ? Maybe intercepting them ?
    We are using Workshop 9.2 and XMLBeans ... appreciate any advice !!

    You can probably do it using a Servlet Filter ....

  • Exception not being thrown

    I added code to throw an exception when a user-initiated search returned no rows, but for some reason, the exception isn't being raised on the browser. Code:
    mnVo.setWhereClause(queryparams);
    mnVo.executeQuery();
    if(mnVo.first() == null)
    throw new oracle.jbo.JboException("No records on file");
    If I step through the code, I see the throw statement executing, but it is never surfaced. What does get raised is:
    JBO-29000: Unexpected exception caught: java.lang.ArrayIndexOutOfBoundsException, msg=0
    This gets raised (apprently) outside of my code, and the debugger can't find it. What do I need to have in place in order to handle this condition?

    I'm a java newby, so I 'think' I understand what you mean, and I 'think' I already did? Here's the code now:
    if(mnVo.first() == null)
    throw new oracle.jbo.JboException("No records on file");
    catch (Exception e)
    { throw new oracle.jbo.JboException("No Records Found");}
    This behaves identically as it did before...I can see it being thrown in the debugger, but the browser never gets it, and it gets the other error which is pretty non-sensical to a user.
    I failed to mention earlier that this code is in the Application Module in the Client Interface, in case that makes a difference?

  • Binding fault vs Runtime fault

    Hi,
    I am trying to do a http post from a bpel process and I want to retry if I get
    connection errors. When I tried running this with invalid URL I am getting
    a 'connection refused' but it is a binding fault and not runtime fault. I am assuming
    this is the reason that 'retry' configuration is not working. Here are the entries
    in bpel.xml
    <partnerLinkBinding name="PartnerLink_1">
    <property name="wsdlLocation">myService.wsdl</property>
    <property name="retryMaxCount">5</property>
    <property name="retryInterval">60</property>
    </partnerLinkBinding>
    So What decides whether it is a binding fault or a runtime fault? Is there anyway
    to get this as a runtime fault instead? If not what is the right way to do retry in
    this scenario?
    Any information will be of great help
    Thanks
    Raj

    I believe retry only works when there is a runtime fault. As for testing the process you can explicitly throw runtime exception using throw activity for test purpose.
    Dipal

  • Software developed before being hired litigation

    This is my first post so please bear with me if I'm in the wrong place. I have a question which has more legal aspects associated with than technical.
    I was asked by my ex employer to develop a demo website for one of their customers. To speed up the development of the demo in addition that we didn't have much time, I pulled out one of my old applications I have developed for one of my projects 2 years ago, and where much of its functions are being used by another application of my current customers such as Treeview navigation, users and groups and tabs navigation modules. It was in good faith and just to help them out speed up the demo and have something very quickly otherwise I would have never done that but just created some static screenshots.
    So I took (copy/pasted) that application, created a new photoshop template with new icons and all the stuff and made some minor modifications to fit the whole thing fit with the ex employer demo requirements. The ex employer was impressed with how speedy the "development" of the demo was going into thinking that it was from scratch even if I was trying to make it clear that it wasn't the case.
    Now after I got abusively fired by the ex employer for a reason that isn't relevant to be discussed here, he, as I'm sure you could guess, asked for the demo code. I provided them with the photoshop (psd layers file), the icons and other graphics and a complied (Java class files) version of the demo and told them that that what belongs to them.
    The case of the firing will be soon heard in court in the coming months and I'm sure they will try to bring out the demo litigation even if it is not related to the case in an attempt to try to discredit me.
    My question is how should I deal with this in court and how best to go about this before people who would have little if any computer and software knowledge since obviously I don't want to hand out the source code that I was working on for years before being hired by the ex employer?

    I'm not a lawyer, but in most cases for things like writing, software development, etc., stuff is created as works-for-hire, which means that the employer owns all rights for work done as an employee.
    If the stuff you gave the employer was used somewhere else already (and there are already paying customers for it), then arguably you didn't have the right to give the employer the code.
    But all this is moot if you were never actually employed. If he paid you nothing, you owe him nothing. I suspect it would be very hard indeed for his lawyer to suggest that he owns all these materials if you were never compensated in any way for it or the additional effort you put in tweaking it.
    Whenever I start a new job, there is pretty much always an addendum to the employment contract that lists prior inventions (which are thus not transferred to the new employer). Presumably, if you were hired by this employer, you would have listed this software on that addendum. If you didn't list it but signed a contract he probably wouldn't own the software, but it would be much harder to prove that. But since no contract was ever negotiated or executed (right?), I don't see how he could even use that.
    In short: if there was no contract, and no payment on his side, it's ridiculous to assert that he owns everything. I suppose he could argue there was a verbal contract, but that would be difficult to prove anyway, and nearly impossible to believe if there is no compensation. I believe that contracts in which one side gains nothing are often considered void -- both sides gaining something is one of the bases of a valid contract.
    So if you're telling the truth, the only way he could win this is if he's lying, possibly via a convincing lawyer.
    Just hire an additional lawyer if you have to for god's sake. You probably don't need a software law specialist, because prior works as a principle probably applies to all kinds of work-for-hire contracts, but if your lawyer feels s/he needs the help, then just do it.
    And don't work for scumbags next time. Anybody that insists on you working before signing a contract is suspect.

  • I partitioned the harddrive before reinstalled it, and my system CRUSHED!

    I partitioned the harddrive before reinstalled it:
    OS X 10G
    So i installed my system into this dirve, and before i install it, the system asked me to customize the installation, so i selected those apps that i want, and it says i have 688MB left in the disk.
    So i proceed, but it installed half way and stops, and says that there's not enough space to install the OS, and at this point, i can't restart, can't shut down, but can go into sleep mode.
    How can i resolve it?!
    Please help me!!!!!!!!!!
    [email protected]
    PLEASE!!PLEASE!!!!!! Kneeling down!!!

    +and it says i have 688MB left in the disk...+
    OS X needs more free space than this to operate...
    http://docs.info.apple.com/article.html?artnum=301341
    Hold the power button down for about 10 sec. and your book should shut down. Then restart holding 'C' and try to install again. Btw, why are you partitioning your disc? If it's for Windows, Bootcamp will do this from a single partition.

  • What is the stock drive that is being shipped in the 17"mbp?

    what is the stock HD that is being shipped in the new unibody macbook pro. 320 5400rpm and if anyone knows about he 320 7200rpm that would be great as well. the apple site doesn't specify..

    Hi apollo,
    If you have a 17" MBP you can find out which drive is being used through the System Profiler.
    Apple menu -> About This Mac -> More Info (Launches System Profiler)
    Click on Serial-ATA on the left, and you will see your HD and your Optical Drive listed. The HD should have a manufacturer as well as a model number. If you plug that into Google it will tell you what drive it is.
    --Travis

  • Should these System Preferences match or is it better that the System sets 'Sharing Prefs' (set-up-name's-macbook-pro.local) and Networking/Advanced/WINS name MACBOOKPRO-****) *=numeric digit or letter

    I'm now on another fresh OS reinstall which reverted back to the OEM Mountain Lion 10.8.4 after an upgrade to OS X Mavericks 10.9 When I first thought that the failed OS X upgrade could have been the caused by some conflicting networking settings that I discovered in System Preferences. I tried to match the computer name which I gave at setup which the File Sharing section users i.e. name's-macbook-pro.local with the WORKGROUP name which is generated in the System Preferences/Network Preferences/Advanced WINS section uses MACBOOKPRO-****.
    However I am not using a Windows PC at the moment and don't expect to be sharing with anyone else using one so I'm a touch uneasy seeing these SMB WORKGROUP settings being established by the System and realising that these settings are not allowing the Administrator user (me) override as. If I do unlock my Networking Preferences settings to edit the WINS WORKGROUP name which is automatically generated as "MACBOOKPRO-****" whatever I enter reverts back to the settings the System has chosen, if I delete this generated name the default System WORKGROP name is reset even after pressing 'Apply' and locking the Networking Preferences again.
    The symptoms which make me uneasy are random visibility of a sharing server named as the first half of my Wi-Fi routers SSID ie: BTHub5 not the random letters and numbers that follow BTHub5-****.
    Problems setting up Lexmark and Epson printers. Suggested update from AppStore for Remote Desktop Client, I never purchased Remote Desktop but can see that there is a folder Remote Desktop Management in System/Core Services.
    Unexpected permission changes appearing all over the System, example being that the user group 'Wheel' changing to 'Staff' I don't employ people and don't want or need filesharing with other computers.
    Lots of System crash reports that mostly are listed as 'Exception Type:  EXC_BAD_ACCESS (SIGSEGV)'
    Is any of this normal or am I being stalked by a very persistent user? Thanks in advance for any tips you guys can give me.
    Cheers

    I'm now on another fresh OS reinstall which reverted back to the OEM Mountain Lion 10.8.4 after an upgrade to OS X Mavericks 10.9 When I first thought that the failed OS X upgrade could have been the caused by some conflicting networking settings that I discovered in System Preferences. I tried to match the computer name which I gave at setup which the File Sharing section users i.e. name's-macbook-pro.local with the WORKGROUP name which is generated in the System Preferences/Network Preferences/Advanced WINS section uses MACBOOKPRO-****.
    However I am not using a Windows PC at the moment and don't expect to be sharing with anyone else using one so I'm a touch uneasy seeing these SMB WORKGROUP settings being established by the System and realising that these settings are not allowing the Administrator user (me) override as. If I do unlock my Networking Preferences settings to edit the WINS WORKGROUP name which is automatically generated as "MACBOOKPRO-****" whatever I enter reverts back to the settings the System has chosen, if I delete this generated name the default System WORKGROP name is reset even after pressing 'Apply' and locking the Networking Preferences again.
    The symptoms which make me uneasy are random visibility of a sharing server named as the first half of my Wi-Fi routers SSID ie: BTHub5 not the random letters and numbers that follow BTHub5-****.
    Problems setting up Lexmark and Epson printers. Suggested update from AppStore for Remote Desktop Client, I never purchased Remote Desktop but can see that there is a folder Remote Desktop Management in System/Core Services.
    Unexpected permission changes appearing all over the System, example being that the user group 'Wheel' changing to 'Staff' I don't employ people and don't want or need filesharing with other computers.
    Lots of System crash reports that mostly are listed as 'Exception Type:  EXC_BAD_ACCESS (SIGSEGV)'
    Is any of this normal or am I being stalked by a very persistent user? Thanks in advance for any tips you guys can give me.
    Cheers

  • Getting the keyboard modifiers key state before injecting event.

    I'm using the Robot to inject keyboard events into a host computer from multiple clients.
    Since each client can have different modifiers keys (i.e. Shift, Alt, Ctrl, ...) set at a time and
    clients can interrupt each other, I need to be able to read from the host computer what
    modifier keys are set at that moment to get things back into synch.
    The KeyEvent class has a way to get the modifier keys through:
    KeyEvent.isShiftDown();
    KeyEvent.isControlDown():
    But this doesn't help (apparently) because that information is only available to a
    Keyboard listener when a key is pressed.
    What I need is a way to "get" the current keyboard modifier keys state before injecting
    an event through the Robot.
    Would anyone know how to do this?

    So... the clients send input events to the host and the host in turn simulates those events with the use of a Robot. Is that correct?
    If so then the program needs to save the last injected keyboard input that had a modifier mask in a field somewhere. Whenever you need to ask if any modifier keys are being pressed, you need only to look at this field and see if it is a pressed event. However, this method won't be able to detect a person physically at the host computer typing stuff.
    The central problem is that you can query keyboard input from OS (such as asking if shift is currently pressed) without a focused window using the standard api. But a focused window kind of defeats the purpose of what you are trying to do.

Maybe you are looking for