Modifying workflow created with podcast composer not possible?
I want to modify a workflow created with podcast composer. Whenever I modify the template.plist the podcast producer stops working (I get an xgrid error and the task is not even shown as failed in xgrid).
Even if I revert the change and the template.plist goes back to original the podcast producer refuses to work..... (same error as above). Restarting podcast producer does not help.
Also other workflows don't work anymore.
the only option is to overwrite the workflow by deploying it again from the podcast composer, restarting the podcast producer and then it's fine again.
any help, how I can modify my template.plist ??
thanks
Thierry
You CAN modify the workflows. The easiest way is to make a head start with Podcast Composer. Do everything you can in Podcast Composer and save the workflow locally. Now open the workflow package and edit template.plist. After you have edited the workflow you can no longer open it in Podcast Composer, so use the command line tool 'pcast' to upload the workflow:
pcast --installworkflow --path <path to workflow bundle>
pcast does a validation on the workflow for you and if you did something wrong it gives good hints on where to look in template.plist for the mistakes.
Especially when you are using encrypted passwords and stuff it is better to do that first in Podcast Composer and edit it after that by hand. Make sure you make, edit and upload the workflow on the same machine, logged in always as the same user. Passwords are stored in the local keychain and pcast needs to access these when uploading. Good luck!
Similar Messages
-
Custom Feeds with Podcast Composer
Hello,
I try to setup custom feeds in Podcast Producer. When I run the following command:
podcast --addfeed --feed_name "Test Screen" --description "Episodes with Test Screen in Title" --query "episodes.title = 'Test Screen'"
I get the following error message:
Invalid query ('(episodes.title = 'Test Screen')')
The problem is episodes.title, because when I choose episode.title (without "s" at the end) it works. However the created feed shows no entries. What's wired:
The table name in library_db.sqlite3 (in the share filesystem) is episodes not episode....
What's going wrong here?
Regards
BrunoYou CAN modify the workflows. The easiest way is to make a head start with Podcast Composer. Do everything you can in Podcast Composer and save the workflow locally. Now open the workflow package and edit template.plist. After you have edited the workflow you can no longer open it in Podcast Composer, so use the command line tool 'pcast' to upload the workflow:
pcast --installworkflow --path <path to workflow bundle>
pcast does a validation on the workflow for you and if you did something wrong it gives good hints on where to look in template.plist for the mistakes.
Especially when you are using encrypted passwords and stuff it is better to do that first in Podcast Composer and edit it after that by hand. Make sure you make, edit and upload the workflow on the same machine, logged in always as the same user. Passwords are stored in the local keychain and pcast needs to access these when uploading. Good luck! -
Structure S955 cannot be enhanced (creating new fields is not possible)
If I try to append in table S950.I am getting error mess like this<b>."Structure S955 cannot be enhanced (creating new fields is not possible)"</b>I have to change any settings?
Maybe this OSS note will help you : Note 527083 - Changes to info structures
https://service.sap.com/sap/support/notes/527083
Regards -
DNG files created with LR4 do not show thumbnails
Hi,
When using LR3 to create DNG files from my RAW files, those files would show me thumbnails of my image in Windows Explorer. I am running Windows/7 (64) and have installed a CODEC from "Fast Picture Viewer" that allows thumbnails from RAW & DNG files to be shown. It seems, however, that the thumbnails do not show for DNG's created with LR4.
To Remedy this I uninstalled the CODEC. Downloaded the most recent version and installed it but this did not fix the problem.
I then went to the user forum for the CODEC product and searched for my problem. I found a thread who's solution is to turn off "Embed Fast Load Data" when exporting to DNG and it fixes the problem. I tried this and indeed it did fix it. The responder went on to say ".....When this option is enabled the files created are no longer DNGs (just an undocumented private format of Adobe that no one else can read to this date)". This statement surprised me as it is counter to what I understand Adobe created DNG to be. Can I get some input on this comment as if true it is very troubling.
My second question is that I see where to turn off the "Embed Fast Load Data" in the LR Export module, but where do I do the same thing in the Import module when I'm selecting import mode "Copy to DNG"?
And, my thrid question is this. If indeed the DNG files created by LR4 are proper DNG files and this CODEC is just flawed in some way, does anyone have a better way to allow image thumbnails to be shown in Windows Explorer?
Thanks -- DanHi David,
You testing does not coincide with mine. I have consistently kept "Use
lossy compression" turned off. With lossy turned off, it seems that using
Fast Data Load prevents the thumbnails from displaying whereas turning off
"Fast Data Load" allows the thumbnail to be shown.
Below is comment from Adobe confirming that they have yet to release the
spec containing "Fast Data Load".
From: Ian Lyons [email protected]
Sent: Tuesday, June 05, 2012 12:29 AM
To: Califdan
Subject: DNG files created with LR4 do not show
thumbnails
Re: DNG files created with LR4 do not show thumbnails
created by Ian Lyons in Photoshop Lightroom - View the full discussion -
HT201272 connection with itunes is not possible
hello,
because my device was dead, i got a new one. and i want with my old account to download my purchased apps.
i go on device app store, purchased, but when i add my password i get a message that connection with itunes is not possible??
how to solve this problem?Refer to this article"
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368 -
Captivate File Created with Trial Will Not Open in Paid for Captivate
I have a file created by Trial version of captivate. It was created in a different computer. Now, I have to make some modification in the file. However, when I tried to open it with Captivate 5.5, I got the error shown below. I am not able to use the popular solution provided in this link Click here to view because the file was not created in my computer. I believe that there is a lock on the file since it was created with Trial version of captivate. Is it possible that I send the file to a representative, and they look into it?
Was the file created with the same version? You talk about 'trial', but the only trial version available at this moment is Captivate 8. You were never able to open a Captivate project in a previous version, that explains why you cannot open it in 5.5.
-
Workflow created with Authoring tool produces a workflow that doesn't work
Hi,
I'm getting fed-up with the Authoring Tool. It has such inconsistently bad results.
Anyway, here's my current problem:
1. Create a new MP
2. Create a new Workflow that triggers when an incident is created with no additional criteria
3. Add a command script to the workflow that runs an exe based on the workflow server
4. Add two parameters, one of /commit the other of the Id of the incident
5. Import the MP, copy the resultant assembly DLL to the workflow server
6. Trigger the workflow, it fails with:
Microsoft.EnterpriseManagement.Common.InconsistentDataException: The requested objects had an unknown management pack. ---> Microsoft.EnterpriseManagement.Common.InconsistentDataException: The call produced inconsistent results. The data on the client
does not match the data returned from the server. The most likely cause is that client-side cache is out of sync with server data. ---> Microsoft.EnterpriseManagement.Common.ObjectNotFoundException: An object of class ManagementPack with ID ab2e712a-8963-028c-50bb-8d2fbecf380a
was not found.
at Microsoft.EnterpriseManagement.Configuration.TypeSpaceCacheBaseWithManagementPacks.GetManagementPack(Guid id)
at Microsoft.EnterpriseManagement.ManagementPackManagement.GetManagementPack(Guid id)
at Microsoft.EnterpriseManagement.Configuration.CreatableManagementPackElement`1.GetManagementPack(Guid managementPackId)
--- End of inner exception stack trace ---
--- End of inner exception stack trace ---
at Microsoft.EnterpriseManagement.Configuration.CreatableManagementPackElement`1.GetManagementPack(Guid managementPackId)
at Microsoft.EnterpriseManagement.Configuration.ManagementPackTask.Constructor.CreateSingle(Result row)
at Microsoft.EnterpriseManagement.Configuration.ManagementPackElementConstructor.CreateMultiple[T,H](IList`1 dataAccessResult, EnterpriseManagementGroup managementGroup, ManagementPack managementPack)
at Microsoft.EnterpriseManagement.TaskConfigurationManagement.GetTasksInternal(ManagementPackTaskCriteria criteria, IList`1 targetTypeIds, BaseClassTraversalDepth baseClassTraversalDepth, Nullable`1 managedEntityId)
at Microsoft.EnterpriseManagement.TaskConfigurationManagement.GetTasksInternal(ManagementPackTaskCriteria criteria, IList`1 targetTypeIds, BaseClassTraversalDepth baseClassTraversalDepth)
at Microsoft.EnterpriseManagement.TaskConfigurationManagement.GetTasksInternal(ManagementPackTaskCriteria criteria)
at Microsoft.EnterpriseManagement.TaskConfigurationManagement.GetTasks(ManagementPackTaskCriteria criteria)
at Microsoft.ServiceManager.WorkflowAuthoring.Common.ManagementGroupHelper.GetTaskGuid(String taskName, String mgmtGroupName)
at Microsoft.ServiceManager.WorkflowAuthoring.ActivityLibrary.CommandScript.InitializeRunTaskActivity()
at Microsoft.ServiceManager.WorkflowAuthoring.ActivityLibrary.CommandScript.Execute(ActivityExecutionContext executionContext)
at System.Workflow.ComponentModel.ActivityExecutor`1.Execute(T activity, ActivityExecutionContext executionContext)
at System.Workflow.ComponentModel.CompositeActivityExecutor`1.Execute(T activity, ActivityExecutionContext executionContext)
at System.Workflow.ComponentModel.ActivityExecutor`1.Execute(Activity activity, ActivityExecutionContext executionContext)
at System.Workflow.ComponentModel.ActivityExecutorOperation.Run(IWorkflowCoreRuntime workflowCoreRuntime)
at System.Workflow.Runtime.Scheduler.Run()
Does anyone know why this is or how to fix it?
I've tried twice now with the same results.
Cheers,
RobI gave up with this approach and created a custom activity for this workflow which is passed the same parameters and performs the same actions but works perfectly.
Did you ever find a reason for this error? -
PDF created with LiveCycle will not display
All the other PDF links in the email work. However, the document created with LiveCycle give me this error in Firefox. I have made all the updates according to Firefox for Adobe Reader and Java. Still receiving this. Any suggestions??? I can see it in Explorer but not firefox or Chrome. Not everyone that will get this particular document will use Explorer. Unfortunately, I need a fast answer.
Well, since I fixed it in Chrome, it works for me. However, my partner beside me doesn't have Chrome and he gets the same generic screenshot that I had earlier, even though we made the changes in his Firefox. We're baffled...... The interactive form is the only form we can't pull.
-
How to know the PO Created with RFQ or Not..??
Hi MM Gurus,
How to know the purchase order created with one quotation or not. because when i am trying to create PO with /ME21N through DOcumen Overview on. there is list of Quotation. i created PO with XYZ quotation. and after creation of PO i am trying to create another PO with another quotation but in that list still XYZ quotation is Displying. so how to knows once PO cretd with Quotation or not. . and I dont wanted to disply quotation once created Po.
Thanks in Advance.
N.A.ReddyHi Pradeep. Thanks for the mail.
the problem is ....with *quotation...*
How to know the purchase order created with one quotation or not.
because when i am trying to create PO with /ME21N through DOcumen Overview on. there is list of Quotation.
I created PO with XYZ quotation. and after creation of PO i am trying to create another PO with another quotation but in that list still XYZ quotation is Displying.
so how to knows once PO cretd with Quotation or not. .
and I dont wanted to disply quotation once created Po.
Thanks in Advance.
N.A.Reddy -
Slideshow created with iphoto will not burn with idvd
I cannot seem to burn dvd using idvd. slideshow created with iphoto
I'm having the same problem after upgrading to 10.3.9 and iphoto 4.0.3. Read below:
Until recently I was running 10.1.5 using iphoto 2 to burn folders of photos within a library. After upgrading to 10.3.9 and iphoto 4.0.3 I get a message: “The burn to the ARCHOS MiniCDRW XS8432 drive failed. The device failed to respond properly, unable to recover or retry.”
Actually, I got another message before I installed patchburn 3.1.2. After installing patchburn 3.1.2 for 10.3.X, system profiler recognized my burner and says it is supported but the above message is displayed after the program has stopped the process.
Toast Titanium 5.2.1 burns CD’s just fine but when a CD with an iphoto library is inserted into the CD-ROM the iphoto program will not recognize it. In other words, it won’t show up in iphoto as an iphoto library or anything for that matter. Maybe there’s a way to do this in Toast or maybe I need something else to make iphoto work with my burner.
Can anybody help me? Thanks! -
Files not created with iTunes do not play from remote iTunes library
I hve ripped a large part of my CD collection into music files into FLAC format. I have since converted my music files from FLAC into Apple Lossless Audio Codec (ALAC) format and imprted them into iTunes.
The files play with no problem on iTunes if they are on a local iTunes library. Furthermore, all metadata such as tags and album cover art information are properly displayed in iTunes. This is true whether I'm running iTunes on a Windows XP box or a Mac OS X box. I have since imported many other CDs into my iTunes library using iTunes to encode into ALAC.
If I share the iTunes library on my Windows XP machine to iTunes running on a Mac OS X box or to an Apple TV, I can:
*play songs that were imported directly using iTunes
*not play any songs that were not created with iTunes
This behavior is true whether I'm trying to play them from either a Mac or from an Apple TV.
If I copy the *.m4a files to the Mac and import them to the iTunes library I have no problems playing them on the Mac. I have not tried sharing the iTunes library on the Mac and tried accessing the files from the Apple TV or the Windows PC.
Any thoughts?Fix: optimize m4a files moving the meta data to the beginning, whilst optionally creating a hint track (used for streaming m4a over Apple Airtunes).
see: http://www.dbpoweramp.com/codec-central-m4a.htm -
Workflow integration with IBM lotus notes
Hi
Can anyone tell me how does SAP workflow builder interact with IBM Lotus notes? For e.g., say a workflow has been initiated by a user and it has been assigned to his manager. Then in this case, the manager should be intimated by an email about the start of the workflow. How to configure the email ids to continue with the workflow. Can you please tell me the exact procedure of carrying out this workflow starting from the beginning till end?Hello,
You can set up Extended Notifications outside of workflow to send emails (which can end up in Lotus Notes) telling users that they have workitems in their inbox.
If you just want to tell someone a workflow has started, then you can use a SendMail step within the workflow.
For more information, search the forum.
If you run into any problems, feel free to ask.
regards
Rick Bakker
Hanabi Technology -
Error with IBAN Generation not possible
hello
In transaction XK01, when I create a vendor in bank details I have an error when I add the IBAN. This vendor is Spanish.
If I create directly the IBAN I have this message : " Generation not possible". Why.
But if I create this supplier by entering the first :
- County,
- Bank key
- Bank account
- CK
The iban be generated without errors.
I set this bank in FI01.
Could you help me.
Best regardshi, I am using ECC500 and I just follow following instructions.
It is working fine.
Cheers
>
SAP Note 503182:
>Solution
> 1. Copy function module SAMPLE_INTERFACE_00003030
> from SAMPLE_INTERFACE_00003030
> to CONVERT_BANK_ACCOUNT_2_IBAN_ES
> Function group: IBAN
> 2. Copy function module SAMPLE_INTERFACE_00003040
> from SAMPLE_INTERFACE_00003040
> to CONVERT_IBAN_2_BANK_ACCOUNT_ES
> Function group: IBAN
> 3. Implement the attached source code corrections.
> 4. BTE setting:
> Transaction: FIBF
> Settings -> P/S function modules
> Create the following entries:
> Event Country Function module
>00003030 ES CONVERT_BANK_ACCOUNT_2_IBAN_ES
> 00003040 ES CONVERT_IBAN_2_BANK_ACCOUNT_ES -
Charts with Makit, scrolling not possible
Hello Forum,
I'm experiencing an issue regarding Makit Charts on Mobile.
The problem is that is not possible to scroll down the page on mobile if the charts is 100% (width and height) and in both directions landscape and portrait.
The chart's container is sap.m.Page and as explained in the official documentation the scrolling is provided automatically.
I attach my code and both images (desktop and mobile).
Hoping your answers could help me.
Thanks.
jQuery.sap.require("sap.m.MessageBox");
sap.ui.jsview("demo.charts.views.Multichart", {
getControllerName : function() {
return "demo.charts.views.Multichart";
createContent : function(oController) {
var page = new sap.m.Page();
var value = new sap.makit.Value();
// var category = new sap.makit.Category();
var category_axis = new sap.makit.CategoryAxis;
var series = new sap.makit.Series();
var bubble = new sap.makit.ValueBubble();
category_axis.setDisplayLastLabel(true);
page.setTitle("Multi Chart");
value.setExpression("Netwr");
value.setFormat("currency");
value.setDisplayName("Revenue");
// category.setColumn("Gjahr");
// category.setDisplayName("Year");
series.setColumn("Bukrs");
series.setDisplayName("Company");
bubble.setStyle(sap.makit.ValueBubbleStyle.FloatTop),
bubble.setShowCategoryText(true);
var chart = new sap.makit.Chart({
// category : category,
categoryAxis : category_axis,
valueAxis : new sap.makit.ValueAxis({}),
series : series,
values : value,
valueBubble : bubble,
categoryRegions : [
new sap.makit.Category({ column : "Gjahr", displayName : "Year" })],
chart.setType(sap.makit.ChartType.Column);
chart.setShowTableView(false);
chart.setShowRangeSelector(true);
chart.setShowTableValue(false);
chart.addColumn(new sap.makit.Column({
name : "Gjahr",
value : "{Gjahr}"
chart.addColumn(new sap.makit.Column({
name : "Netwr",
value : "{Netwr}",
type : "number"
chart.addColumn(new sap.makit.Column({
name : "Waerk",
value : "{Waerk}"
chart.addColumn(new sap.makit.Column({
name : "Bukrs",
value : "{Bukrs}"
chart.setModel(this.oModel);
chart.bindRows("/Chart_DataSet");
chart.attachEvent("tap",function(oEvent){
var isRightMB;
var e = oEvent.getParameter("eventObject");
if ("which" in e) // Gecko (Firefox), WebKit (Safari/Chrome) &
// Opera
isRightMB = e.which == 3;
else if ("button" in e) // IE, Opera
isRightMB = e.button == 2;
if(isRightMB){
var srcObj = oEvent.getSource();
// var srcElem = srcObj.getDomRef();
var temp = document.oncontextmenu;
document.oncontextmenu = function (e){
document.oncontextmenu = temp; // reset back to its
// original state, so that
// other elements still have
// context menu
return false;
var msg = oEvent.getSource().getSelectedCategory();
sap.m.MessageBox.show( msg, sap.m.MessageBox.Icon.INFORMATION, "Chart Right Click - Selected Category", [sap.m.MessageBox.Action.OK] );
chart.attachEvent("doubletap",function(oEvent){
var chartObj = oEvent.getSource();
var msg = oEvent.getSource().getSelectedCategory();
sap.m.MessageBox.show( msg, sap.m.MessageBox.Icon.INFORMATION, "Chart Double Tap - Selected Category", [sap.m.MessageBox.Action.OK] );
var oButton = oController.generateConfigPopover(chart);
var oBar = new sap.m.Bar({
contentLeft : [ new sap.m.Button({
text : "Back",
type : sap.m.ButtonType.Back,
press : [oController.handleNavButtonPress, oController]
contentMiddle : [ new sap.m.Label({
text : "Multi Chart"
contentRight : [ oButton ]
page.setCustomHeader(oBar);
page.addContent(chart);
return page;Hi,
I don't have "Advanced" tab in Mouse settings in control panel. Is there something i need to install in adition to Toshiba Synaptics drivers?
I also tried changing every available setting in Synaptics drivers settings, but no change :(
About Synaptics generic driver: Yes, I chose that one, but as I said, it's really buggy with two finger scroll, so I reverted back to Toshiba ones. -
Playlist ordering with 4G shuffle NOT possible
It's not possible to sync the order of songs with the 4. Generation of the iPod shuffle. THe shuffle is playing always ordered by Artist.
Changing the order in iTunes and re-sync the iPod doesn't affect the order on the iPod shuffle.
Is this a bug in the firmware of the 4G shuffle or a problem with iTunes?You can sort all the music that is not in a playlist on your shuffle. It inherits whatever sort you have selected for your entire music library in itunes. To see what I am talking about, do this:
1. Under Library (on the left side of iTunes) click "Music"
2. You now see on the right your entire music library. At the top, click the top of the column you want to sort by. You can right click to add more columns
3. Sort by something different than what you are currently sorting by.
4. Connect your shuffle and wait for it to come up
5. When your shuffle appears on the left, open it and click "Music" and note how it is sorted. The column it is currently sorted by will be darker in its heading and their will be a triangle in that columns heading
6. Now click on the name of your shuffle and click sync.
7. Go back to your "Music" entry on your shuffle and you will see it is now sorted by the column you changed your iTunes music library too.
So, your music on your shuffle will inherit the sort order you have set for your entire library on itunes, when you sync it.
Does that make sense?
i
Maybe you are looking for
-
I recently upgraded from 4S to 5S. There are 2 games that I wish to transfer to the new device. 1st game isn't available in the Store anymore, so can't download. 2nd game doesn't save when you change devices. How do I get those 2 apps to my new phone
-
Error while creating table maintenance generator
Hi, I am getting below error while creating table maintenance generator. Screen SAPLZtest 0002 could not be generated. In DYNPFIELD_ATTR field LENGTH has the invalid value 241. Reason for that error might be: In the table I have a field with a da
-
Error while executing query through rsrt
hello experts, I am facing following error while executing one HR query through rsrt. "System error in program SAPLRRI2 and form REP_ASSIGN_INITIAL_OPT-01- (see long text) " while executing query through rsrt it automatically goes to debug mode, comi
-
What if you are on another mac and I want to use my cc?
I'm using the mac from a friend who already had his crative cloud. this does not allow me to download my apps on this because when dicop mac download makes me see the account of my friend and I do not download. as you take off your acount and you put
-
I'm a newbie and I would like any suggestions and help with my problem. I have a view, m_jobs, that is based on the view, sys.dba_jobs. I want to add a two fields, user_id and update, to keep track of user who is adding and modifying scheduled jobs.