Monitor Dim (Suspecting software, Not hardware isssue)
Hi,
I have two Toshiba laptops (Qosmio X300, Satellite P100) and they are both giving me the same issue: unusually dim screens. I've tried fn buttons and BIOS settings, but none of that seems to affect the screen.
I've done some research on the subject, and many people when they hear unusually dull screen right away believe that it's a broken backlight, but I'll explain why I do not think that that is the case.
I got the Qosmio about two weeks ago, in came installed with Windows Vista 64 bit.
This was not acceptable for my client so I installed windows XP on it instead.
So the thing I want to mention here is that the screen was bright while in Vista, then it was bright for about a week in XP, now it is suddenly dim, and no software seems to be able to adjust it. (I tried the Nvidia settings, Power settings, Bios Settings, FN keys) The hotkey program by toshiba is installed.
My Satellite P100 is also running Windows XP (sp2 or maybe 3) and with that one the issue is very similar. The screen is dull, it used to be bright and no software seems to be able to affect it.
Here are my serials:
(satellite)
pspa3c-jr500e
(qosmio)
pqx32c-02k01s
Hi
What happens if you would go back to the Vista (preinstalled by Toshiba)?
Did you check if the screen brightness would go back to the normal level?
I think you should do this because its really strange issue
I mean the display brightness could be decreased and increased using the FN+F6 or FN+F7 buttons. The display brightness could change also if you would set another value in the Toshiba Power Saver. But as far as I know there are no Win XP drivers for Qosmio X300 and therefore you could not use the Power Saver for display brightness changing.
But there are XP drivers for Satellite P100 so maybe you would be able to use the FN key combination in order to increase the display brightness.
Similar Messages
-
I bought the iphone 5 has not been one week do not understand why the home key of the time activities at stops working, not crash or fall. hope its help, probably due to software, not hardware failure, what do I do now?
Restore iPhone with current iTunes on computer. See if better. If still problem, make Genius reservation or set up Service and take or send to Apple for resolution. Of if easier for you, take receipt and iPhone, box and everything and return to where you bought it.
-
The "gig" is not up. IMHO the problem is with software, not hardware
There very well could be a few iPhones that have hardware problems but my opinion / findings say it is sofrtware rather than hardware.
Case in point. I have owned my iPod Touch (32 GB) for over 6 months now and have had no problems with it until I installed 2.0 software. The problem got even worse on the Touch when I upgraded to 2.0.1. The problem was freezing up which required a special rest proceedure and a complete restore. I had the same problem with not one but two iPhone 3G's (I returned the first one). Same scenario. Speical reset and complete restore solved the problem. I have now had no problems except for a little instability (such as slow keyboard from time to time) for the past 4 days. Bear in mind this is on BOTH the iPOd Touch AND the iPhone 3G. ONe would think that if the problem was with hardware that the problem would not be with both the iPhone 3G AND the iPOd Touch.
Would love to hear the opinions of others.
KenIf your question is "Is the 2.0/2.01 software buggier/slower/flakier than the 1.0/1.1/etc. software for iPhone/iPod Touch", then the answer is of course SMS typing slows down on occasion now, weird pauses, freezes etc. are all new to 2.0/2.01.
This doesn't mean that the iPhone 3G hardware isn't possibly flawed as well-that still hasn't been answered. But its pretty common knowledge (I think) that 2.0/2.01 is much less stable than the 1.0 OS. (on the flip side, look at all the new stuff we get to play with in 2.0/2.01 ) -
Even though my software and hardware is up to date my new iPhone 5c is not recognized by my computer or itunes, it does not even load or show up on my desktop. Is anyone else having this problem?
I'm afraid it may be related to activating the phone in the store earlier today and not having my computer on hand?Hi, akp2585.
If your Mac is running OS X v10.6.8 or later and iTunes version 11.1 or later, here is a troubleshooting article that you may find helpful.
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
Cheers,
Jason H. -
hi i want to use find my mac but i got this massage (some configurations, such as software or hardware RAID,do not support a recovery partition and can't be used with find my mac)
hi i want to use find my mac but i got this massage (some configurations, such as software or hardware RAID,do not support a recovery partition and can't be used with find my mac)
-
I'm getting the following error message when attempting to invoke "Find My Mac"
Some configurations such as a software or hardware RAID do not support a recovery partition and can't be used with Find My Mac.You have no recovery partition. This is a normal condition if your boot volume is a software RAID, or if you modified the partition table after running Boot Camp Assistant to create a Windows partition. Otherwise, you need to reinstall OS X in order to add a recovery partition.
If you don't have a current backup, you need to back up before you do anything else.
You have several options for reinstalling.
1. If you have access to a local, unencrypted Time Machine backup volume, and if that volume has a backup of a Mac (not necessarily this one) that was running the same major version of OS X and did have a Recovery partition, then you can boot from the Time Machine volume into Recovery by holding down the option key at the startup chime. Encrypted Time Machine volumes are not bootable, nor are network backups.
2. If your Mac shipped with OS X 10.7 or later preinstalled, or if it's one of the computers that can be upgraded to use OS X Internet Recovery, you may be able to netboot from an Apple server by holding down the key combination option-R at the startup chime. Release the keys when you see a spinning globe.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
3. Use Recovery Disk Assistant (RDA) on another Mac running the same major version of OS X as yours to create a bootable USB device. Boot your Mac from the device by holding down the option key at startup.Warning: All existing data on the USB device will be erased when you use RDA.
Once you've booted into Recovery, the OS X Utilities screen will appear. Follow the prompts to reinstall OS X. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
If none of the above choices is open to you, then you'll have to start over from an OS X 10.6.8 installation. There's no need to overwrite your existing boot volume; you can use an external drive. Install 10.6 from the DVD you originally used to upgrade, or that came with the machine. Run Software Update and install all available updates. Log into the App Store with the Apple ID you used to buy 10.7 or later, and download the installer. When you run it, be sure to choose the right drive to install on. -
HT1338 Left hand side of monitor dims on 2011/intel based iMac-any suggestions?
Left hand side of monitor dims on 2011 /intel based iMac-any suggestions? Called apple support. Restarted-didn't help. Unplugged my second monitor from the thunderbolt port-didn't help. Unplugged center cord in the middle on the back of the monitor-waited 15 seconds, restarted, held down option-command-p-r and this didn't help. Apple support thought that it was most likely a video card/hardware issue, but would like to hear of any other trouble shooting suggestions.
Not a hardware issue, since it shows up in a screenshot. Please boot in safe mode, launch Safari, and test. Same problem?
Some things won't work in safe mode, possibly including wireless networking.
After testing, reboot as usual (not in safe mode.)
Mac OS X: Starting up in Safe Mode -
I have an early 2009 24 inch iMac. It is running mavericks. When I attempt to download using the boot camp assistant i get the message " software not currently available from server" So I went to the Boot Camp support website and there are about half a dozen versions of the boot camp download. None of them match my hardware. I tried the one closest, but when I went to run the setup in windows, it says my machine does not support x64. I have installed windows 7 home premium x64....It works, sort of. I cant get sound and my magic mouse behaves badly.
Do I need a different version of windows or is there a compatible version of boot camp for my system? Thanks for reading.If you installed Mavericks then you had Boot Camp 5 installed automatically. If you have tried downloading from Apple's download site you won't find a version other than 4 or 5 that provide a total package.
Boot Camp- System requirements for Microsoft Windows operating systems
Boot Camp- Installing Windows 7 Frequently Asked Questions
Download BootCamp Drivers for Macs to run Windows 7 or 8 | Chris F Carroll
Boot Camp- Some computers require Microsoft Windows 7
Boot Camp Help- Overview of Boot Camp setup -
When is the new macbook air coming..??
and what are the probable updates in both softwares and hardware..??SubmissionsStay on topic. Apple Support Communities is here to help people use Apple products and technologies more effectively. Unless otherwise noted, do not add Submissions about nontechnical topics, including:Speculations or rumors about unannounced products.
You'll want to ask this question elsewhere. "Management" on these boards don't want these topics. -
Monitor dims and brightens during work session
my monitor dims and brightnes by itself while in a work session..nothing i do knowingly to cause this.
what is the fix?
thanksSystem Preferences > Monitors.
Make sure the checkbox for "Automatically adjust Brightness" is not selected. -
Software and hardware requirement of Discover 4i?
What is the software and hardware requirement of Discoverer 4i?
What is the requirement also for application-mode? I mean the application side.Hi I have looked the Metalink Note which is mentioned in the reply but that is not having the exact software and Hardware Requirements (i.e os packages required for unix platforms) for OEM Agent. Please help me to know the requirements pls.
-
Software and Hardware Requirement for Management Agent
Can any one help me to find out the software and Hardware requirements for Oracle 10g Management AGent for various platforms.
Hi I have looked the Metalink Note which is mentioned in the reply but that is not having the exact software and Hardware Requirements (i.e os packages required for unix platforms) for OEM Agent. Please help me to know the requirements pls.
-
LabVIEW Software Developer/Hardware Integrator
La Jolla, CA based automation and custom solutions provider seeking LabVIEW software developers.
Job Description
Seeking a National Instruments LabVIEW Software Developer/Hardware Integrator to join our team developing customized automated control and test equipment.
The preferred candidate will have 1-5 years experience in software development and hardware integration using LabVIEW and some experience with embedded C. Candidate must have hands-on experience interfacing and calibrating various transducer signals to both National Instruments and Third Party data acquisition boards.
Software Experience
Programming experience with an understanding of a majority of the items below:
Labview Programming 1-5 years
GOOP/LVOOP
Database Connectivity
RS232 and USB COM programming
Real Time Systems
AIO, DIO, Counter Configuration and Operation
Producer/Consumer Architecture
Queues, Events, Timed Loops, Objects, Multithreading, Hardware Triggering, Variants, Code Interface Nodes, PID
ActiveX, DLL APIs
LabVIEW Application Deployment (building and deploying executables)
*A preference will be given to candidates who have experience in both NI Data Acquisition hardware and Embedded Arm Development.
Hardware Experience
Candidates will have demonstrated experience (or at least a basic understanding of) in the integration of transducers and signal conditioning commonly used in Biomedical/Biotech industries into data acquisition and control systems including but not limited to:
Temperature (TCs, RTDs, and Thermistors)
Photodiodes
pH,DO,ORP Electrodes
Liquid/Gas Valves
Liquid/Gas Pumps/Compressors
Motion (Stepper and DC Servo) including Quadrature Encoders
Pneumatic displacement cylinders
Lighting (Bulbs and LEDs)
Solid State and Mechanical Relays for AC/DC power switching
Thermoelectric Coolers
Digital Switching and Bus Communication (DIO, SPI, Counter, Triggering, etc.)
Education
Some college-level experience in Electrical/Computer/Optical/Bio/Chemical Engineering and/or Computer Science. A formal degree is not as important as capabilities and creativity. Previous Experience with National Instruments LabVIEW Training is highly desired. Understanding of AC/DC circuit basics is a requirement and a preference will be given to candidates with more component level electronics experience.
Positions
We have both part-time and full-time positions available in our La Jolla, CA office. We are a company specializing in the development of custom automation solutions for various clients primarily in the Biotech/Biomedical/Oceanography areas. We are a small, but growing company looking for individuals who like a diverse work environment filled with unique challenges that are constantly changing.
If you enjoy using your creativity and talents in a fun entrepreneurial environment and like the idea of working in the beautiful surf-town of La Jolla, CA then we want to hear from you...
www.labviewautomation.comHey, I own a Canadian built sailboat, drink the occasional Canadian beer, watch CKWS on cable, can say Eh! with the best of them, had my first anniversary honeymoon in Ottawa. I even have a loonie in my pocket and $5cdn in my wallet You have to be Canadian? Winters are milder there than where I live too.
Fixed wire, that is for those posters in the other threads that insist on posting for the 3 -4 year old jobs! How else will he get them to apply in a timely fashion?
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion -
Error 2510/2355 - Disk burner or software not found
When I run as administrator, I get Error 2510. When I run as a regular user, I get Error 2355. Either way, and in safe mode or not, I get the "Disk burner or software not found" error when trying to burn CDs. iTunes was working wonderfully for ages and overnight (literally) it stopped writing CDs. There has been no new hardware or software in my system around the time it stopped working (unless my anti-virus missed something). Help please!
What I’ve tried:
Un-install and re-install iTunes.
Steps from: http://support.apple.com/kb/TS3299 (but then CDROM didn't work for regular use)
All of the steps from: http://support.apple.com/kb/TS2308 including solution 3 (manually un- and re-install GEAR drivers)
Ran System File Checker (no problems found), reboot, reinstall Gear Drivers
NOTE: When putting a CD into the drive, I can select Play From Itunes and it works fine.
Here are my diagnostics:
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
Hewlett-Packard HPE-500f
iTunes 11.2.2.3
QuickTime 7.7.5
FairPlay 2.6.12
Apple Application Support 3.0.3
iPod Updater Library 11.1f5
CD Driver 2.2.0.1
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.1.1.3
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 002ABB8808AE4888
Current user is an administrator.
The current local date and time is 2014-06-28 21:44:46.
iTunes is running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
ATI Technologies Inc., AMD RADEON HD 6450
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: dd6dd481bbfb0f7503d21df5c81fb96d
iPodService 11.2.2.3 (x64) is currently running.
iTunesHelper 11.2.2.3 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.0.1),
Failed while scanning for CD / DVD drives, error 2510.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
E: Unsupported CD or DVD drive.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
Force Optical Power Calibration before burn is turned on in the preferences.
The last failed audio CD burn had error code 4251(0x0000109b). It happened on drive E: HP DVD Writer 1260v on CDR media at speed 16X.Bump.....
Can anyone please help me? -
I'm thinking of upgrading from v10.6.8 Snow Leopard to OS X Yosemite. I know, I'm years behind, but it has become a necessity. My Mac is becoming slow and is incompatible with many softwares and websites. Does anyone know of any problems associated with this upgrade? What are the implications and/or consequences of installing Yosemite? Does it effect functionality of v10.6.8 software or hardware? Are there any precautions I should take before the installation? I have read some posts about Macs slowing right down after installing Yosemite. Any insights and information (in layman's terms please!) would be very useful. Thanks.
Huge thanks for your response Michel. I apologise for the delay in getting back to you. I have done as you suggested, the details are pasted below. Clearly there are some applications I need to remove and no doubt my HD could do with a 'spring clean'. My Mac 'Safe Booted' when I turned it on this morning.
I use many different softwares, some web-based. The decision to upgrade to OSX Yosemite is because I was unable to attend a Webinar this week using GoToMeeting downloadable software. GoToMeeting have upgraded their system and my OS is no longer supported. Other websites like VImeo no longer support my version of Safari. I tend to use Chrome if Safari isn't compatible.
Problem description:
I'm thinking of upgrading from v10.6.8 Snow Leopard to OS X Yosemite. However I have noticed that my MacBook Pro becoming ‘slow’ over the last 3 weeks and therefore might have some issues that need to be resolved before I even consider installing OSX Yosemite. Over the last week my Mac has Safe Booted on three occasions, so clearly there’s a ‘glitch’ occurring.
EtreCheck version: 2.1.1 (104)
Report generated 6 December 2014 10:21:01 GMT
Hardware Information: ℹ️
MacBook Pro (15-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,2
1 2 GHz Intel Core i7 CPU: 4-core
4 GB RAM
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
AMD Radeon HD 6490M - VRAM: 256 MB
Color LCD 1440 x 900
Intel HD Graphics 3000 - VRAM: 384 MB
System Software: ℹ️
Mac OS X 10.6.8 (10K549) - Uptime: 0:35:42
Disk Information: ℹ️
Hitachi HTS545050B9A302 disk0 : (465.76 GB)
S.M.A.R.T. Status: Verified
- (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 499.76 GB (236.21 GB free)
HL-DT-ST DVDRW GS31N
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Microsoft Microsoft® Nano Transceiver v2.0
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple, Inc. MacBook Pro
Configuration files: ℹ️
/etc/launchd.conf - Exists
Adware: ℹ️
Geneio [Remove]
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.flipvideo.IOUSBCameraMassStorage (1.0.1) [Support]
[loaded] com.microsoft.driver.MicrosoftMouse (8.2) [Support]
/System/Library/Extensions/MicrosoftMouse.kext/Contents/PlugIns
[not loaded] com.microsoft.driver.MicrosoftMouseBluetooth (8.2) [Support]
[loaded] com.microsoft.driver.MicrosoftMouseUSB (8.2) [Support]
Startup Items: ℹ️
HWNetMgr: Path: /Library/StartupItems/HWNetMgr
HWPortDetect: Path: /Library/StartupItems/HWPortDetect
Startup items are obsolete in OS X Yosemite
Problem System Launch Daemons: ℹ️
[not loaded] org.samba.winbindd.plist [Support]
Launch Agents: ℹ️
[running] com.flipvideo.FlipShare.AutoRun.plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
[running] com.trusteer.rapport.rapportd.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[running] com.flipvideo.FlipShareServer.launchd.plist [Support]
[loaded] com.google.keystone.daemon.plist [Support]
[running] com.trusteer.rooks.rooksd.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
[failed] [email protected] [Details]
[invalid?] com.citrixonline.GoToMeeting.G2MUpdate.plist [Support]
[loaded] com.genieo.completer.download.plist Adware! [Remove]
[loaded] com.genieo.completer.update.plist Adware! [Remove]
User Login Items: ℹ️
None
Internet Plug-ins: ℹ️
o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
Google Earth Web Plug-in: Version: 7.1 [Support]
OfficeLiveBrowserPlugin: Version: 12.3.6 [Support]
RealPlayer Plugin: Version: Unknown
AdobePDFViewerNPAPI: Version: 10.1.12 [Support]
FlashPlayer-10.6: Version: 15.0.0.239 - SDK 10.6 [Support]
Flash Player: Version: 15.0.0.239 - SDK 10.6 [Support]
iPhotoPhotocast: Version: 7.0 - SDK 10.7
googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
QuickTime Plugin: Version: 7.6.6
AdobePDFViewer: Version: 10.1.12 [Support]
CANONiMAGEGATEWAYDL: Version: 2.1.0.1 [Support]
CANONiMAGEGATEWAYLI: Version: 2.1.0.1 [Support]
EPPEX Plugin: Version: 3.0.5.0 [Support]
JavaAppletPlugin: Version: 13.9.8 - SDK 10.6 Check version
User internet Plug-ins: ℹ️
BrowserPlus_2.9.8: Version: 2.9.8 [Support]
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Support]
Safari Extensions: ℹ️
Omnibar Adware! [Remove]
My eBay Manager
Add To Amazon Wish List
Audio Plug-ins: ℹ️
iSightAudio: Version: 7.6.6
3rd Party Preference Panes: ℹ️
3ivx MPEG-4 [Support]
BrowserPlus [Support]
Flash Player [Support]
Microsoft Mouse [Support]
Perian [Support]
Trusteer Endpoint Protection [Support]
Time Machine: ℹ️
Time Machine information requires OS X 10.7 "Lion" or later.
Top Processes by CPU: ℹ️
26% Safari
2% WindowServer
2% activitymonitord
1% PluginProcess
0% WebProcess
Top Processes by Memory: ℹ️
405 MB WebProcess
301 MB Safari
125 MB Mail
116 MB rapportd
116 MB mds
Virtual Memory Information: ℹ️
1.02 GB Free RAM
1.78 GB Active RAM
429 MB Inactive RAM
1.07 GB Wired RAM
422 MB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Dec 6, 2014, 09:45:53 AM Self test - passed
Dec 5, 2014, 11:49:18 PM QTKitServer_2014-12-05-234918_[redacted].crash
Maybe you are looking for
-
When the updater notified me of an iTunes update, I selected the update option. The update failed and killed the version I was running. I have tried for a year to fix the problem without sucess. I can't completely remove all Apple products. I can
-
Transfer SGTXT from Billing to Accounting
Hi All, Here we have a requirement like we need a text field(length more than 40 char) in VF01 transaction to enter Narration and that should be copied to SGTXT(Itemtext) field of corresponding accounting document. Presently we are using one long tex
-
Opening pdf ..urgent
Hi, i have a page on which i have a link 'View'.On clicking the link a pdf document opens. In some machines on clicking the 'View' link the browser prompts for the Open/Save options in pop-up(the one that we usually get while downloading a file from
-
Transporting request to two clients
Hi Experts, We have two clients(100 and 200) in production system. 1. If we transport client-independent request to any client 100 or 200, will it effect entire system? 2. Shall we have to transport client dependent request to production 2 times?( fi
-
When I have ALL my photos open in Organizer/Media, the majority of them are showing Boo file names (back up) in the information Window (top right hand side). Should this be happening to the majority of my photos.