Monitor progress of data donwload

Hi,
I would like to build something like a progress bar that
monitors the progress of downloading of data from a remote
database, or XML using HttpService. Is this possible? are there
examples that can be shared?
Thanks!

<mx:ProgressBar indeterminate="true" visible="false"
label="Loading, Please Wait..." enabled="true"
labelPlacement="top" id="waitBar" textAlign="center"
fontStyle="italic" fontWeight="bold"
fontSize="10" color="#127A9C" themeColor="#4dda08"
width="200" height="5" bottom="30" right="20"/>
<mx:WebService id="" wsdl="{}" concurrency="multiple"
load="waitBar.visible=true">
</mx:WebService>

Similar Messages

  • How can I monitor my monthly data usage for all 3 computers in my house? I have an Airport base station and it seems there should be software to monitor it from that point rather than monitoring the usage for each computer and then adding it up.

    How can I monitor my monthly data usage for all 3 computers in my house? I have an Airport base station and it seems there should be software to monitor it from that point rather than monitoring the usage for each computer and then adding it up.

    The following example was one of dozens that showed up on a simple Google search of.....
    monitor Internet data use on a Mac
    Watch your Internet usage with NetUse Monitor | Macworld
    Most service providers have an application for their users as well.

  • Data warehouse monitor initial state data synchronization process failed to write state.

    Data Warehouse monitor initial state data synchronization process failed to write state to the Data Warehouse database. Failed to store synchronization process state information in the Data Warehouse database. The operation will be retried.
    Exception 'SqlException': Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
    One or more workflows were affected by this. 
    Workflow name: Microsoft.SystemCenter.DataWarehouse.Synchronization.MonitorInitialState
    Instance name: Data Warehouse Synchronization Service
    Instance ID: {0FFB4A13-67B7-244A-4396-B1E6F3EB96E5}
    Management group: SCOM2012R2BIZ
    Could you please help me out of the issue?

    Hi,
    It seems like that you are encountering event 31552, you may check operation manager event logs for more information regarding to this issue.
    There can be many causes of getting this 31552 event, such as:
    A sudden flood (or excessive sustained amounts) of data to the warehouse that is causing aggregations to fail moving forward. 
    The Exchange 2010 MP is imported into an environment with lots of statechanges happening. 
    Excessively large ManagedEntityProperty tables causing maintenance to fail because it cannot be parsed quickly enough in the time allotted.
    Too much data in the warehouse staging tables which was not processed due to an issue and is now too much to be processed at one time.
    Please go through the links below to get more information about troubleshooting this issue:
    The 31552 event, or “why is my data warehouse server consuming so much CPU?”
    http://blogs.technet.com/b/kevinholman/archive/2010/08/30/the-31552-event-or-why-is-my-data-warehouse-server-consuming-so-much-cpu.aspx
    FIX: Failed to store data in the Data Warehouse due to a Exception ‘SqlException': Timeout expired.
    Regards,
    Yan Li
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Monitoring Progress of Loading an Application

    How do I Monitor progress of loading an application made in Java itself using Progressbar or ProgressMonitor?

    Hello Bharat,
    I think programming the ProgressBar is not the main problem, but having it
    displayed as soon as possible after launching the application. I at least
    have no idea how to guess/calculate the loading time. But to have an indeterminated ProgessBar quickly showing would already be nice.
    Joerg

  • Monitor progress of through WebService DataHandler

    Im trying again as my first post in the glassfish forums have not lead to any help/suggestions. I def dont like to repost but I need to expand my audience a bit.
    I am building a web service to move files around. I am using a method that returns a @XmlMimeType("application/octet-stream") DataHandler to the client. I do have @MTOM and @StreamingAttachment enabled. S
    I dont really know the details, but the call to the WebService that returns the DataHandler seems to actually move the file over? After the method returns, I get the DataHandler and any moving of the data on the client side takes no time at all. So if I call the service to move a 20MB file, the webservice call takes a few minutes, but after the call returns, moving the file through the dataHandler takes not time at all. Any ideas how to monitor this progress on the web service method call? Is there another way to monitor this? TIA.

    Well I'm going to chalk my lack of feedback as a question that is hard to understand from my explanation,or I'm asking the wrong question. But I still believe I cannot be the only one hitting this problem. Simply put I cannot find away to view/handle the progress of a file transferred from a web service to the stand alone client, if that web service call returns a DataHandler. Now in this thread ... [http://forums.java.net/jive/thread.jspa?threadID=22481]
    others have shown how monitor an upload to the server from the client side. I am after the opposite, ability to monitor the progress of file downloading from the server(GF v2.1) to the client.
    Now, is it possible that there isn't a direct way of doing this. Surely Im not the only one to run into this type of situation. Is there a better way of moving a file from glassfish server, with ssl, to a user allowing the client app to monitor the progress?

  • How to monitor progress of web-service calculation?  And abort it?

    Hello. We're thinking of converting an existing Java radar calculation program into a web-service, so that it can be used by various interested parties. However, calculations can take some time (several minutes) and so we would like the client to be able to both show calculation progress and allow the user to abort the calculation if necessary. It is not obvious to us how to do this with a web-service. Are there any standard approaches to this problem? What's the best way of a client asking the web-service how a calculation is progressing? What's the best way for a client to abort a calculation? Any advice most welcomed.
    Kind regards
    Paul Howland
    NATO C3 Agency
    The Hague

    You can't estimate the duration withour running the gather_database_stats. You can monitor it while it is running. (e.g. count the tables that have got updated statistics based on DBA_TABLES)
    And if you run gather_database_stats, the default behaviour might well be to exclude tables which aren't "stale" while in the imported database the expectation is to gather stats on all tables.
    (Similarly, the behaviour to gather column histograms (method_opt) may differ in an existing database from a newly imported database)
    Hemant K Chitale
    Edited by: Hemant K Chitale on May 14, 2013 10:13 AM

  • Computer Monitor Progressive vs. HD progressive

    OK, so we all know that if a project is going to be broadcast, you have an NTSC monitor set up when you're editing, right? Because the computer monitor is a progressive display, it isn't the best when it comes to color correction or interlacing/deinterlacing issues (as seen in many a thread here when people say "XXXX looks really bad when I see it in the canvas" only to have someone say "Have you looked at it on a TV or NTSC monitor?). So we're all in agreeance (is that even a word?) that computer monitors (LCDs like the Apple's Cinema Display) are not the best to view this stuff, right?
    That said, how come all HD televisions (smaller than 52 inch plasmas) are LCD progressive? Isn't that just like watching something on a computer monitor?
    Just wondering.
    Jonathan

    Progressive plasma and LCD TV's have powerful de-interlacers built into them, they effectively take the 480i60 image and upscale, and interpolate it into a 480p60 image, in real-time, there is a delay in the picture because of this, and the sound has to be delayed to match - it is quite noticeable when playing rhythm action games on consoles (like Guitar Hero).
    Some do it better than others, and some don't do it at all (discard 1 field to make a 240p30 image, and blend).
    The same is true of 1080i60 images being turned into 720p60 or 1080p60 by HDTV's, again, some do it badly, or not at all.
    What I do on a computer, is use compressor to take i60 sequences and use the advanced format conversion to set the frame controls up to create a p60 sequence, for viewing on a monitor. It takes a long time to do, but looks pretty decent, and still maintains the fluid movement I expect from video (60 updates per second).
    For instance, taking 1080i60 HDV and making 720p60 DVCProHD seems to work quite well.

  • In processchain monitor workbench no data found....

    in Process chain --> monitor Adminsistrator workbench --> i didnt find any data it is saying that no data selected what should i do???
    if it shows "no data selected means what should i do???"what does it mean??actually i need to find out the problem why process chain got stucked...
    succefull jobs and not yet completed jobs are not showing in monitor screen....
    please help me..friends...
    Edited by: Bi_Madhavi on Sep 6, 2010 5:46 AM

    Hi,
    This means that no data has been selected for that selection condition from Source system to get uploaded to the data target. Please check if you have any data in Source system or not...
    Hope it Helps,
    Rgds,
    Amit Kr.

  • Comparing Progress analysis data saved in past periods

    Hi forum team,
    We are using PS in SAP R3 ECC 6.0 system
    With the intention to reviwe at later stage, we had saved 'Progress
    Analysis' report data (CNSE5)in 'Other selected version' in past periods
    i.e.in July, August etc.When we open these reports in November all its
    fields (Adj/Nonadj/Agg/Non Agg/PlanPOC/ActualPOC....) except actual
    cost shows current period (November) values.
    We thought this version copy would be a sort of screen shot but now it appears as a dynamic report.
    How can we save this report (cnse5) in ERP database as we save project version for comparision in future?
    Please suggest.
    Thanks,
    Mohan Parab

    Hi
    The standard method is KKA8. But you need to reverse the settlement.
    Or you should be able to delete  the data from RPSCO with Value type 32.
    But once you delete, you will be running the RA again for the last 10 Years? If so will you be settling it again? In that case how do you reconcile this with FI-CO and PA?
    Thanks
    psconsultant

  • Drop Box - possible for  other user to monitor progress?

    Is it possible, for the user whose Drop Box I am tranferring files to, to monitor the progress so they can tell when an upload is complete to their Mac?
    I get the progress window on my end, but they have no idea what is going on on their end.

    Pretty difficult, iirc the Filesize required is reserved at the start, so Get Info wouldn't help.
    Perhaps they could use Activity Monitor to observe the Network IN activity?
    Most likely someway to monitor it with a Script, but beyond me at the moment... Maybe Sharepoints with AFP Monitor!
    http://www.hornware.com/sharepoints/

  • JProgressBar - monitoring progress of a method in another Object.

    Hi all,
    I've been three days trying to make a JProgressBar work. I know how to use them but not in this case. I'll try to explain the code instead of making you read it.
    -I have a JProgressBar in a JDialog.
    -In the constructor of this class I create a new instance of a Object, call it Processor for example, and i run a method start() on it.
    -This method execute a number of SQL statment and i want to monitor them in the JProgressBar.
    I've followed the official tutorial but it doesnt work for me, I have no idea how to do it beacause i don't know how to refresh the Task process property from outside the doInBackgroundMethod. I also tried to create 2 SwingWorker, run the Processor.run() in one of them, an in run() update a "satic int progress" in each iteration, then from the other SwingWorker i check the Procesor.progress to invoke the setProgress() method.
    I have realised that when debugging sometime it works, so i supposed is something about concurrency, I don't know, please help.
    Thank you in advanced.

    the processor is a runnable, right? then:
    MyDialog extends JDialog{
    private final JProgressBar progressBar= new JProgressBar()
    MyDialog(){...}
    private void init(){
    new SwingWorker<Void,Object>(){
    public Void doInBackground(){
    String sql1=...
    Object o = execute sql1
    publish(o);
    ... do the same with other sql queries
    return null;
    public void process(List<Object> chunks){
    //update progressbar
    //this method will be called using coalescence, so maybe you execute 3 queries, and this method gets called just once, and in this case 'chunks.size()==3'
    public void done(){
    //make sure that the progress is complete, the last chunks may have not been processed through process() method
    progressBar.setValue(100%) // I dont remember the syntax for this
    Edited by: thrawnkb on Jun 3, 2009 3:36 PM

  • What are the possible Monitor Object status data members

    I have problems connecting to the object over ethernet. I need to know what the status data member text info means.

    Hi,
    The status datamember of the Monitor object gives the state of the "connection" you're trying to monitor. For instance, when this datamember is displayed on a panel, it shows text like: "Good," "Disconnected," and so on.
    Hope this helps,
    Khalid

  • Monitoring user msater data change through CCMS

    Hello Experts,
    I have a requirement where I need to set up a system in which a mail should be triggered to SAP mailbox or internet mail (of one particular person or more than one person) when a SAP_ALL or SAP_NEW profile is assigned to users through SU01 transaction.
    I was trying to implement this by using CCMS (under MTE Security)
    Can anyone please guide me if this can be achieved by CCMS or is there any other method?
    Any detailed document to implement this would be of great help.
    Thanks in Advance.

    Hi Yoganand,
    thanks a lot for your helpful answer!
    I did not know that CEN first calls the sapccm4x agent and only in case of inactivity it uses the RFC based data collection method.
    I never could find that info anywhere in the SAP help.
    From time to time I have the following situations with a system, who's built-in RFC account has been locked out:
    When I open the monitor in RZ20, the login account shows up. I cancel and finally the monitor comes up and the data of this system is included!!
    That could be something like a timeout effect: after a certain number of seconds, CEN tries to get data over the RFC in addition to still trying the agent ... and then the agents finally answers and delivers the MTE data (the RFC cannot authenticate and therefore will never deliver anything ... )
    Rigas

  • Monitoring progress of URLs - How?

    I'm developing a very simple web-browser, and I would quite like to have a progress bar to display how much of the current page is loaded.
    I have been trying to use a ProgressMonitorInputStream to get a dialog with a progress monitor to appear, but with no success. The code I'm using is:
    ProgressMonitorInputStream pmis = new ProgressMonitorInputStream(null, "Current Status",
    url.openConnection().getInputStream());
    ProgressMonitor pm = pmis.getProgressMonitor();
    pm.setProgress(0);
    pm.setMillisToDecideToPopup(100);
    html.setPage(url);
    where "html" is a JEditorPane and url is an URL object for the page I'm downloading.
    Am I going about this the wrong way? Any pointers would be greatly appreciated.

    Unfortunately you need something a like more complex since your current code is opening up the stream ok and wrapping it in the progress monitor but then when you pass the URL to JEditorPane it is then opening the stream itself and bypassing your monitor.
    You need to create a sub-class of JEditorPane and override the method: getStream to return an InputStream that is wrapped in a ProgressMonitorInputStream and probably a BufferedInputStream as well...
    You could even just do:
    protected InputStream getStream (URL page)
    throws IOException
         InputStream in = super.getStream (page);
        ProgressMonitorInputStream pmis = new ProgressMonitorInputStream(null, "Current Status", in);
        ProgressMonitor pm = pmis.getProgressMonitor();
        pm.setProgress(0);
        pm.setMillisToDecideToPopup(100);
        return new BufferedInputStream (pmis);
    }That might work but no promises...

  • Monitoring progress of init() method in servlet

    the init() method of my servlet is extremely long; it will probably take several minutes to load. For this reason, I want to have my servlet print its progress periodically. Unfortunately, when initializing a servlet, Tomcat does not allow the System.out.println() method to do anything.
    Is there a way to tell tomcat to print something to the screen while it is initializing the servlets?

    You can write jamon monitors after each event that occurs in the init method. Then if you go to the jamonadmin page you can see the progress. You will find many other uses for jamon too. One thng that it does real well is to allow you to look at what is currently executing in your web application via the jamonadmin page.
    It is easy to use. Really just 2 methods: start and stop. see below. You should be able to get it working in minutes.
    jamon is an open source project. Also if you use the servlet filter it will keep stats such as hits, and time stats (avg, total, min, max) and more.
    import com.jamonapi.*;
    // i'm not sure of the actual signature name, but this should give you the point.
    public void init() {
    Monitor mon=MonitorFactory.start("executing Part1 Of Init")
    ... part 1...
    mon.stop();
    Monitor mon=MonitorFactory.start("executing Part2 Of Init")
    ... part 2...
    mon.stop();To get jamon go to www.jamonapi.com. There is also a live program that lets you see the JAMonAdmin.jsp page in action.
    steve - http://www.jamonapi.com

Maybe you are looking for