Monitor transport of PO to backend system

Hi,
Is there a transaction in the SRM that monitors the PO transport to the backend system and display weather the transport was successful or failure and display failure reasons.
Thanks,
Eyal.

Hello,
you can also consult the error monitor (based on CCMS) where each transfer error is logged.
By ITS: get the SAP_BBP_STAL_ADMIN (or something like that) role, menu --> PO --> Backend application error.
By SAP GUI: transaction RZ20 --> Goto one of EBP error monitor (there are duplicates).
Corresponding erroneous PO will also remain in table BBP_DOCUMENT_TAB, with an error flag.
Check this table, it should be empty (except entries not already processed by job CLEAN_REQREQ_UP).
Rgds
Christophe

Similar Messages

  • Monitor Transport Cost

    Dear Experts,
    we have not use Transport module &  required to update Per Pcs out word Transportation cost in system.  Please guide how to update so we can easily monitor transport cost.
    Regards
    BK GAIKWAD

    1)  Create a new condition type in V/06 by copying PR00 with all parameters same as PR00
    2)  Maintain the required access sequence in V/07; preferably with table 305
    3)  Assign this in your pricing procedure with the required "From-To" step number and also an Account Key
    4)  Assign the required G/L Account in VKOA for this freight condition
    5)  Next maintain the required rate in VK11 for this condition type
    6)  Finally create a sale order and do billing.  Check the FI postings for this freight. 
    thanks
    G. Lakshmipathi

  • How we can monitor while import request in production system?

    dear friends,
    will you please explain me
    how we can monitor while import request in production system?
    and
    what are the things we have to monitor during the transport?
    thanks
    regards
    zaheer

    Hello Zaheer ,
    I would always recommend to check that you have the latest transport tools, tp and R3trans in use in the system to avoid import errors.
    Check with
    tp -v
    R3trans -v
    if either are more than around 4 months old, I would strongly recommend to download the latest for your release from the SAP service marketplace. This avoids needlesly encountering issues that have been resolved in more recent patch lebels of these tools.
    During the import, it is important to check the contents of the directories
    usr/sap/trans/tmp
    and
    usr/sap/trans/log
    that they are being continously updated which shows import is progressing.
    Most important, keep checking the latest entries in the alog, uloag and slog to see which phases and trasnports are currently being imported.
    If a transport fails, check these logs and the latest ones updated in usr/sap/trans/log for further details on the failure.
    If there is an error please NEVER manual run any commands wihtout contacting SAP and having them analyse the issue.
    When opening a message, be sure to include the latest alog, ulog and slog, along with the last few files most recently updated in usr/sap/trans/log and if possibel open an R3 connection to the import system.
    Best regards,
    Paul

  • Run-time reading of roles from backend system

    EP5 unification provided the ability of displaying an end-user's backend system roles in the iPanel.  This did not require importing the backend role to EP5.  This greatly reduces the maintenance of roles in EP (especially with BW!

    Hi Daniel,
    You have a possibility to upload the whole Role from R/3 to EP6 Portal. You do it the following way:
    Create system in Portal for your R/3.
    Navigation to System Administration->Transport->Role Upload. Select system that you wish to upload Role from, search for your role.
    That's it!
    All objects in uploaded role become iViews.
    Best Regards,
    Julia

  • AE 5.2: Roles get provisioned to backend system but profiles randomly not

    Hi,
    we are currently switching from profiles to roles and therefore created user request containing the roles to be assigned and the profiles to be removed. The roles are assigned successfully to the user but the some profiles are not removed randomly. The backend user used by AE has the correct authorizations.
    Had anybody such a problem before?
    Thank you for your answers
    Marco

    Hi Hersh,
    we did a user role comparison several times before and users had the profiles already for a period of time. Also the request get submitted radomly meaning we can't monitor all the requests because the last approvers approve the request sometime and the the request gets provisioned. Further, AE should provide any message in such a case.
    Could it be if the user to be changed is logged on to the system that such a scenario could happen.But when changing user authorization in the backend system itself this doesn't have any impact and this also applies for the GRC backend user.
    Regards.
    Marco

  • Error by transferring PO to backend system ERP 2005

    Hi guys,
    we are implementing mySAP SRM 4.0 with SRM-Server 5.0. We use therefor ECS.  After we have created a SC and a PO was generated with WS14000075 (no-approval-workflow) we get in transaction BBP_PD following stats:
    Stats:
                      Status                Description                   Inactiv
    HEADER     I1015          Awaiting Approval                  X
    HEADER     I1021          Created
    HEADER     I1038          Complete
    HEADER     I1043          Ordered
    HEADER     I1080          In Transfer to Execution Syst. X
    HEADER     I1132          Transfer Failed (E.Sys.)
    HEADER     I1180          Document Completed
    We transfer the POs with a spool-printer which is assinged in PPOMA_BBP under attribute "PRI" to the backend-system.
    We have checked other threads here searching this issue but we didnt find any solution.
    We use local POrg and PGrp with no assignment to the backend-system.
    We have maintained following attributes in PPOMA_BBP:
    SYS = SRM logical system and R/3 logical system
    BSA = SRM logical system and R/3 logical system
    ACS = R/3 logical system
    We have checke RZ20-> B2B Procurement Monitor -> Purchase Order for more information about PO transfer.
    There we got following alerts:
    23.11.2006 17:52:00 SR1    Business to Business Procurement(010) Purchase Order Backend application errors ACTIVE Bestellung 7100000125: No instance of object type PurchaseOrd
    23.11.2006 17:52:00 SR1    Business to Business Procurement(010) Purchase Order Backend application errors ACTIVE Bestellung 7100000125: PO header data still faulty
    23.11.2006 17:52:00 SR1    Business to Business Procurement(010) Purchase Order Backend application errors ACTIVE Bestellung 7100000125: Enter Purch. Group
    We hope you guys can help us as you have done so often. Thanks in forward.
    BR,
    Bernd

    Hi,
    Error "23.11.2006 17:52:00 SR1 Business to Business Procurement(010) Purchase Order Backend application errors ACTIVE Bestellung 7100000125: No instance of object type PurchaseOrd" tells us there is no transaction type in backend system for PO.
    example:
    in Define transaction types:
    tran type = ECPO
    description = Purchase Order
    Int no. = PO
    Ext no. = PO
    status schema = empty
    Attriburtes for local Your company:
    BSA = <srm_logical_system>\ECPO
    BSA = <backend_logical_system>\ECPO
    transaction type ECPO must exist in backend for PO object.
    Check also in PPOMA proper company code in tab 'Function' (must be with reference to backend company code)
    Regards,
    Marcin Gajewski

  • "8 Transport Monitor Transport Monitor Hot SyncLib.PPC "  Huh ??

    Hi
    I had a problem logging in to my PowerBook. It may have been related to my wife's Palm or the iPod I just got(my first).
    Either way I was able to log in after doing an "Install and Archive" but I received this message;
    The application Transport Monitor could not be launched because of a shared library error
    "8<Transport Monitor><Transport Monitor><Hot SyncLib.PPC>"
    ........any suggestions or ideas as what this is about?

    Hi
    This is, indeed, Palm Desktop/Hotsync software. It stores files in your system's Library folder, so after an Archive and Install, it will malfunction in the way you've seen.
    You should completely uninstall (see instructions), and then reinstall, Palm Desktop. Reinstall it from your Palm's installation CD if you still have it, but if not, you can find the software online.
    Matt

  • Failure to connect to backend system in Portal

    Hi Experts,
    I was hoping someone could help, quickly!!
    We are having an issue with transporting our VC model.  We are on VC 7.0 SP17
    I created a model in our development environment using a variable input form and adding the value help feature.  After we deploy in our dev environment the model looks perfect!!!
    We transported the VC model as an iview through the portal and we get a Failure to connect to back end system error.  We ruled out that it is not a transport problem using the portal.
    Can someone help!! 
    Thanks so much, Anna

    Hi Again,
    Thanks for both of your response, however, there is nothing in the log files andt we still have the Application error message, failure to connect to backend system.
    We were able to bypass the error and the model starts to "semi-function" - but we cannot access the characteristic through value help, we just get empty drop downs.   We all have the proper authorization in BI....
    Do you think there is a permission problem in the back end portal?
    Hopefully you can help.
    Thanks so much, Anna

  • Error while reading the PO in the Backend system. Inform system admin

    Hi All,
    We are having a peculiar issue of 'Error while reading the PO in the Backend system. Inform system admin'.
    The P.O is in ordered status in SRM but the same is not getting transferred to backend ECC system.
    No error messages or logs in RZ20, SLG1 any where.
    All programmes like BBP_GET_STATUS_2 and CLEAN_REQREQ_UP are running fine.
    Tried pushing the P.Os manually using function module (BBP_PD_PO_TRANSFER_EXEC_V2) to backend ECC.
    It was working fine till a week ago and suddenly this problem is coming.
    We had implemented few OSS notes suggested by SAP for the issue of 'shopping carts appearing in sourcing cockpit even after P.O creation' in both development and test system.
    Now this issue is coming up in test system where as development system is working fine.
    Please let us know where to look and how to resolve this issue.
    A quick response would be highly appreciated.
    Regards,
    Teja

    I am facing the same issue with one PO in the Production system.
    SRM 5.0 , R/3 4.6C Extended classic scenario.
    I checked the status of other PO's created today. I see them in R/3. There is one PO which was created a week back which shows up as "ordered" in SRM but the PO is missing in R/3. When clicked on the details on the web, system throws the error
    Error while reading the PO in the Backend system. Inform system admin.
    Message no. BBP_CF010
    I checked RZ20, SLG1 no errors were found. I checked RFC connection, it was working fine too.
    I tried pushing the PO using the FM BBP_PD_PO_TRANSFER_EXEC, it did not solve the problem.
    In SRM WEBGUI Process PO - Item data -->follow on documents --> PO status is shown as Archived.
    Any inputs would be greatly appreciated. Please throw some light on this issue.
    Krishna

  • Can there be more than one transport targets for a business system in sld

    Hi All,
    I have a question about transport targets in sld for sap xi 3.0 sp19.
    We have a requirement where a business system needs to have two transport targets.In SLD i see that only one transport target can be assigned. Is there any way to assign more than one transport target to a business system?
    I know that there can be more than one source for a business system where more than one  different business systems have the same business system as the target.
    I am not sure if a business system can have more than one transport target .If yes , what is the way to add more than one ?
    Please help .
    Thanks,
    Padmaja

    Hello,
    I know that there can be more than one source for a business system where more than one different business systems have the same business system as the target.
    As far as I know, you would have to change the target everytime you will transport it to a different target e.g 3 target systems = 3 times you change the transport target in SLD.
    Regards,
    Mark

  • Error while reading PO in backend system Inform system adiministrator

    Hi All,
    I am working on extended classic scenario and the problem is that after the PO ís ordered it gives the message " Error while reading PO in backend system Inform system administrator" and this is happening only for a particular local PO.
    When I check the PO number in R/3 it does not exist.
    The number range is correct both in SRM and R/3 (external no. range is ticked).
    Also I could not find any logs in RZ20 nor a dump.
    When I checked in bbp_pd, couldnt find any relevant information except that the PO has the status ordered.
    I am on SRM version BBPCRM 4.0 SAPKU40007
    R/3 version 4.6 C SAPKH46C47
    Thanks in advance,
    Rgrds,
    Raj
    Message was edited by:
            Raj Malhotra

    Hi
    Have you tried out this ?
    <b>There are two BADIs which might help you in achieving the job.</b>
    <u><b>BBP_EXTLOCALPO_BADI</b> [Control Extended Classic Scenario ]
    <b>and</b>
    <b>BBP_GROUP_LOC_PO</b>
    [Exit Grouping of Items for Local Purchase Orders]</u>
    <u>Read the documenatation first, using transaction - SE18
    before implementing them for your requirement.</u>
    Hope this will help.
    Please reward suitable points.
    Regards
    - Atul

  • Error while reading the PO in the Backend system   !

    Hi all,
    We  are working on SRM 5.0(SP12) and Extended classic scenario.
    The problem is that after the PO ís ordered it gives the message " Error while reading PO in backend system Inform system administrator" .
    When I check the PO number in R/3 it does not exist.
    The number range is correct both in SRM and R/3 (external no. range is ticked).
    In RZ20,i find the log:
    The error ocurred by processing event SENT_AGAIN with GUID 490F3C0834351AC6E10000000AE48838 and object_id= 3000000307
    The R/3 System Version is 4.6C.
    Any help is highly appreciated.

    Hi,
    Thanks for the response.
    This problem is hapeening for all PO's in the system.
    The no range is smae in both the systems.In SPRO ,howevre we have not maintained the no range in SRM for R/3 system.
    Here is the config details:
    Supplier Relationship Management>SRM Server>Cross-Application Basic Settings>Number Ranges>SRM Server Number Ranges-->Define Number Range for Local Purchase Orders
    EC     3000000000     3999999999     3000000320
    Supplier Relationship Management>SRM Server>Cross-Application Basic Settings>Number Ranges>SRM Server Number Ranges-->Define Number Ranges per Backend System for Follow-on Documents
    SAPE02_050     EC            RS
    Supplier Relationship Management>SRM Server>Cross-Application Basic Settings-->
    Define Transaction Types
    ECDP     PO: Direct Material     03     02
    ECPO     Purchase Order     EC
    I have already gone thorugh note Note 1258634 - Certain events cannot be de-activated.
    This note is however valid for SRM 6 and 7.
    PO is not reaching R/3 system.
    No error in sm58/sm12.
    The status in BBP_PD for the PO is :
    Stats:
               Status         Description                    Inact
    HEADER     I1009          Held                           X
    HEADER     I1015          Awaiting Approval              X
    HEADER     I1021          Created
    HEADER     I1038          Complete
    HEADER     I1043          Ordered
    HEADER     I1080          In Transfer to Execution Syst. X
    HEADER     I1180          Document Completed
    Awaiting your inputs.

  • Error when transporting Webservice from our DEV system to QA system

    Hello, I created a web service from an rfc by following the wizard from Utilities>More Utilities> Create Web Service.  This was created in our 030 client of DEV.  I had to create two transports one client independent that was the VI and Service and one Client dependent for the actual webservice.  I then transported the webservice to our DEV 200 client and all worked well.  Next I transported both to our QA box, first the vi/Service transport then the webservice transport.  This is not working, in our QA system, from wsadmin when trying to get the wsdl error is Could not determine wsdl address (ICF ERROR) and from wsconfig when I pull up the service definition and variant the status shows a red stop sign.  Is there a trick to transporting this webservice to different systems?
    I def award points for helpful answers
    Cheers
    Devlin

    hi,
    I had this problem once and in my case the service wasn't activated in SICF.
    so see your service tree under /sap/bc/srt/rfc/sap/<your_service> and probably it's inactive (grayed out). right klick and activate it.
    anton

  • Error while posting return delivery to backend system

    Hi All,
    We are facing problem when we are posting return delivery. Currently we are in ECS implementation. Our SRM is 7.0 EHP3.
    Scenario goes as, SC is created then PO is created then further confirmation is created and on creating return delivery of this confirmation, this return delivery goes error in process.
    Now on further analyzing, I found out that outbound IDoc in SRM is getting posted successfully but when ECC receives this IDoc it is saying please enter reason for movement 122. This reason for return is already entered while creating the return delivery. But this reason is not flowing in IDoc (Message Type MBGMCR and Basic Type MBGMCR01) in SRM and further to ECC. This field MOVE_REAS in IDoc is populating blank.
    Can anybody help me resolving this problem? Any pointers or SAP notes related to can also be suggested.
    Thanks
    Siddarth

    Hi Siddarth,
    Please implement the note below, which is included in SP05.
    2007628 - Return delivery cannot be posted in backend system as reason for return delivery is empty
    Regards,
    Wendy

  • Unable to create a PO(in backend system) in ECS

    Hello all,
    I used the FM BBP_PD_SC_CREATE, BBP_PD_SC_UPDATE, BBP_PD_SC_SAVE to create a shopping cart in ECS scenario.
    The problem is I am unable to create a PO in the backend system for the shopping cart. I am also getting the message 'Vendor 3000014598 not intended for purch. org. Ref: MM Purchasing Org'.
    Please help me in this context.
    Thanks,
    Vishnu

    Hi,
    The problem with organization structure , Please check your organizaiton structure.
    Change company code /Pur.org Separatlly it will work.
    while replicating vendor please select the flag 'with out reference to back end pur.org' and choose local purchasing organization.
    refer this link
    Vendor xxxxxxx not intended for purch. org. xxxx Purchasing Organization
    Thanks
    prasad .s

Maybe you are looking for

  • How come this doesn't work?

    for (i=0;i!=(row*col);i++){ total+=parseFloat(eval("value"+(i+1))); trace(total); trace(parseFloat(eval("value"+(i+1)))); total is a variable from a dynamic text box and the eval("value"+(i+1)) variables are from input text boxes. The trace(parseFloa

  • SQL migration to 11g problem

    While migrating from MS SQL Server 2008 to Oracle 11.2 using SQLDeveloper 3.2.2, i'm getting an error: java.lang.Exception: The plugin used to capture this model is not available.  Please re-install the plugin and try again before convert.     at ora

  • HT1620 Should I download the iOS 6.1 or will my iPhone 4 crash?

    Should I download iOS 6.1 on my iPhone 4? Or will it crash and I loose data like when I down loaded iOS 6?

  • Error 14 when trying to sync iPod Touch

    Hello. I tried updationg my iPhone OS for my 2nd Generation iPod Touch today and I got and error while trying to do that. I then realized that I hadn't updated my iTunes (update which was released yesterday). I updated my iTunes and then tried to upd

  • Printer is Offline Message on a Mac 10.6.8

    Hi, This problem is driving me crazy, and wanted to print alot of documents. But anyway, I followed the troubleshooting issues posted on your support site and followed and nothing happened. I have tried resetting my printer, re-installed my HP softwa