Monitoring 1024x576 ("offline" RED)? wierd.

hi. i have a problem monitoring 1024x576 ("offline" RED footage, H.264) out of FCP (6.0.4).
when i send the external video to the Blackmagic card, i get seemless playback on the external monitor - but the canvas is is a "freeze frame" (despite having "Mirror on Desktop" checked).
and when i send it out to the DV deck, i get playback on the canvas - but a static image on the video monitor.
i have checked my system against other projects, and can confirm that i get "normal behaviour" with my video monitoring for those...
thanks for any help, deadlines are a killer :-S

blimey... sounds weird... did you add any filters to your origonal clip in the timeline? because it sounds like you are viewing corrupted render files.
I how did you move your media from one place to another? using media manager? or 'by hand' outside FCP?
can't think why the source media should be shortened unless you used media manager and had a setting that deleted unused media or something...
the first step would be to locate your media on your hard drive... if you're not 100% sure where it is, you will be guessing about the problems in FCP...
on the desktop, press apple+F and do a 'search everywhere' for your 'untitled3' media

Similar Messages

  • Everyone in my iMessage is offline (red)

    I don't know what I did, but everyone in my iMessage is shown to be "offline." The cloud chat icon is red. How do I get this back online?
    Thanks

    Hi,
    Diana's posts was on the 13th Dec 2013.
    It is two up from this one Everyone in my iMessage is offline (red)
    I can't link you it directly as no-one replied to it when it was posted.  (in other posts you can use the "In reply to.." link to see the actual post when they are out of  order)
    Some of the ordering is based on your personal settings.
    I view the threads in Threaded view. This "tabs" replies to the right and leaves other posts linked to items before more to the left.
    On the whole the whole thread is then in date order but is can be difficult to follow if someone replies to a much earlier item as it drops to the bottom of the replies linked to that particular post.
    Diane's Posts and the one beneath it are both link to the Original Post.
    8:22 pm      Saturday; January 24, 2015
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • LCD monitor is grainy & red. please help!!

    Hello!
    I have a Macbook from Christmas '06. I recently upgraded to Snow Leopard.... I used to hook my computer up to my TV, but after upgrading it has grainy red lines in the dark areas of the screen. I just bought a new LCD/LED lit monitor and am having the same issue, if not worse. Every single resolution I've tried has these grainy red dots - sometimes lines on the lower res - and I cannot get rid of them, even after calibrating the settings. I even tried downloading switchResX with no luck.
    Please, someone help me. I am sorry I am not well versed in tech terms - so the more basic instructions, the better. Thank you so much for reading!

    You want to press the SHIFT, CONTROL and OPTION (also ALT) keys plus the POWER button.  The CONTROL and OPTION (alt) keys are next to each other.
    Ciao.
    It is also the Left SHIFT key.
    Message was edited by: OGELTHORPE

  • 2nd monitor has no reds

    I have just installed 2 new monitors.
    One is a Samsung hd tv. The other a Samsung Syncmaster 913n.
    The tv works fine there are connectors for my mac, xbox, freeveiw box etc.
    I have just got another dvi to vga cable for the 913n and all the colour has gone out of it.
    I have used this before and it was fine.
    It would appear that all the reds have gone.
    Anyone have any Xmas ideas.
    G5 2.3 Dual Core   Mac OS X (10.4.8)  

    Which video drivers are you using?

  • CCMS monitor, BPE is red

    In CCMS monitoring RZ20, the node XI_system Business Process Engine -> Overall status -> Status of the automatic customizing is red. The text is BPE customizing not fully maintained.
    When clicking this text, an information page is shown, and you can go directly to Automatic Workflow Customizing to Perform Automatic Workflow Customizing. Here, all the steps are green! A few days ago I had to manually execute the job scheduling for Packaging and Reorganization. They where grey before I did this. But now, they are all green.
    So why is the status red in the CCMS monitoring?
    BTW: The nodes Runtime -> Process scheduling -> Status of automatic clean up and Status of container definition buffer are also red!
    Anyone with a suggestion of what the problem could be?
    Edited by: Rune Johansen on Aug 19, 2008 2:39 PM
    Edited by: Rune Johansen on Aug 19, 2008 2:41 PM

    Hey Rune, how are you dude... long time no hear.. how are those shoelaces.
    Let me just get your issue straight... your issue is in the CCMS monitor itself?
    Becuase two things here:
    1: I am sure there are two views... as in one with current alerts and one with previous alerts. (Open Alerts and Current Status). Check which one you are in...
    2: When an error is solved I think you have to update it manually...
    I am just taking a stab at this since it is a while since I last worked with CCMS...
    Could any of these be your issue?
    Edited by: Alex on Aug 19, 2008 4:05 PM

  • S2021A monitor just going red, green , blue on startup and not working

    my monitor used to work fine one day it just turns red, blue, green ,white, black flashing continuous colors on start up and doesnt end up to anything, can anyone tell what the problem is ????

    Hello @saswotsharma,
    I understand that your Compaq s2021a Monitor is cycled through various colors and is not doing anything else. I am providing you with some steps you can try below:
    Step 1. Unplug the power cord from the back of the monitor and the wall
    Step 2. Hold the power button down for at least one minute
    Step 3. Plug the power cord back into the monitor and then into the wall outlet (not a power bar or surge protector)
    Step 4. Press the Menu button on the monitor
    Step 5. Navigate to the Factory Reset option and select it
    Step 6. Change the cables connecting the monitor to the PC
    If the above steps did not resolve your issue you can try the monitor on a computer or other device to see if the issue persists. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Monitor status As Red

    Hi,
    Why we are making the status as red in monitor before deleting the red request in data target.
    Thanks
    karuna

    Hi,
    If the update mode is "Delta" we need to follow this procedure so that the system recognises the next incoming Delta would not be normal delta but "Repeat Delta".
    Repeat Delta means it picks up the data of previous delta(the one which has been deleted) as well as any new delta records.
    Anup.

  • Visual Administration Monitoring Components turns Red for Loaded Applicatio

    Hi Experts,
    In our Producion system,When i check the Monitoring tree I found the below component in Red Status.
    Root -> Services -> Portal -> Portal Runtime -> Loaded Applications (366 Applications )
    I see that Loaded Applications tree is in Red status. When i go to configuration Tab for this tree i see the the threshold
    value for Red is maintained as 300.
    Could you please confirm if this is normal or is it a matter of concern ?
    Does this signify that we have lot many applications deployed with respect to our current portal Configs..
    Two weeks back we have faced a situation wherein our portal system got hanged that no one was able to login and we have restarted our server to rectify the problem.I want to know if the above problem is due to above alerts being thrown in VA monitoring.
    Regards
    Edited by: Sowmya Kumar on Sep 27, 2011 5:12 PM

    Hello!
    Please refer to the SAP notes below:
    #1320707 - Configuration Wizard: PI Full Qualified Host Name
    #654982 - URL requirements due to Internet standards
    Best regards,
    Franklin

  • Offline Red Screen Please Help!

    Hi everyone!  I put a video file I made onto an external harddrive (500 gigs).  I tried to bring this file up on my computer.  What is now showing on my software (Premiere Elements 4) is a red screen with the words "media offline" in several languages.  What do I need to do to retrieve the file?  It took me a long time to make this video and do not wish to do this again.  Adobe will not answer my question.
    Thank you,
    [email protected]

    In addition, I often edit to/from externals on my laptop and my workstation. The setting of the drive letter is used in the OS of each machine.
    I also am using copies of my Assets (originals stored elsewhere) and I keep these organized under the [Project Name] root folder, with sub-folders for "Video," "Music," "Stills," etc. The nice thing about doing it this way is that PE/PrPro is pretty smart, when it cannot find an Asset. When the "Can't Find... " screen pops up, you only have to navigate to the appropriate sub-folder and find the first file. Premeire will then locate all other Assets in that folder.
    If the Assets are scattered about, then one may have to navigate to the location of each to get them all re-Linked. Good Project setup and housekeeping can go a very long way toward a rewarding editing experience.
    I inherited an existing Project, where 2000+ Assets were scattered all over an external. Many had the same exact file names too, but were in different folders (many not sub-folders of the Asset-type)! I had to play the "approval" DVD's (there were 4 @ 2 hrs. each) on one machine, while I re-Linked each Asset by hand. This took most of two full days. Proper prior planning goes a very long way to keeping things straight and making life so much easier.
    Hunt

  • Technical Monitoring - DBA Connection red (failure)

    Hi experts,
    I have the following problem.
    In technical monitoring I have one managed system, on which the DB availability check is not working.
    The DB is a Sybase ASE 15.7
    In solman_setup->system config the DB connection is configured well (green status).
    Also if I open the dbacockpit of solution manager, I can see the DB of the managed system and the connection checks are working fine.
    But in technical monitoring, I get the alert that the DB is not available and also that "DBA Cokcpit Connection Status" = failure.
    If I go to the details of the alert, I also can't see the problem.
    I did already remove and add the system more often. Further I also did remove the connection in dbacockcpit and created it again.
    But now I don't have any further ideas.
    Hopefuly somebody can help me.
    Thank you

    Hi Christian,
    1st let us find the error related to this.
    Follow below KBA to find out the error that is causing the issue.
    2016715 - Metric Troubleshoot using MAI Tools
    Since, you are motioning a remote ASE database, make sure the below KBA is read and applied.
    1532253 - SYB: Remote DB Monitoring for SAP Sybase ASE
    Regards,

  • Titles and gifs not displayed when re-opened

    I had a project that was edited in 2.0. When I open it up in CS3, all of the title clips and animated gifs are shown on the program monitor as offline (red media offline screen). In the Bin, the titles and gifs are shown online. I went through each clip: Reveal in Project; Replace with Clip from Bin. I was able to correct the 50 or so "Media Offline" clips. When I save the project and then reopen it, the titles and gifs are gone again. If I import the project with the missing clips to another project, the clips are OK. But then, when I close that new project and reopen it, the clips are "offline" again.
    This project was originally shot in HD (Sony FX-1) but the finished video is just on a regular DVD. The project settings I selected were DV-NTSC Widescreen 48Hz. The mpeg video clips are always there but not the titles that were created in 2.0 nor the animated gifs.
    Then I added an animated gif in CS3. It too goes "Media Offline" when the project is reopened. Again, the titles and gifs are shown online in the Bin and can be reloaded to the Timeline but go away when the project is reopened.
    I have another project that was shot in standard definition video and edited in 2.0. I selected DV-NTSC Standard 48Hz. It works fine in CS3. But, as I mentioned, the HD video clips are not missing, it's the titles and gifs that are missing.
    Windows XP Pro; 1 GB RAM; 400 GB Hard drive (two 200 GB RAID0)

    One change in Firefox 4 is to by default stop Firefox displaying the warning message, but it can be turned back on by changing some preferences.
    # Type '''about:config''' into the location bar and press enter
    # Accept the warning message that appears, you will be taken to a list of preferences
    # Locate the preference '''browser.tabs.warnOnClose''', if its value is set to '''false''', double-click on it to change its value to '''true'''
    # Repeat this for these 3 preferences '''browser.warnOnQuit''', '''browser.warnOnRestart''' and '''browser.showQuitWarning'''
    If you always open the last set of tabs, an alternative approach is this:
    # Click the orange Firefox button, then select options to open the options window
    # Go to the General panel
    # Change the setting "When Firefox starts" to "Show my windows and tabs from last time"

  • Monitor looks red

    monitor looks all red, I tried another monitor before and that one looked yellow, do i have a problem with my videocard? I went to system preferences and tried all; also I tried the PRAM RESET but didn't work? the monitors seems to work fine in a mini mac that I have. I just recently installed the OSX tiger on it.

    Hi jaymarctx-
    Greetings and welcome to the Apple Discussion boards
    It could be the card. Are you absolutely sure that there is nothing wrong with the cable?
    You may want to try opening up the Mac, pull the video card out and then pressing it back in again to "reseat" it. While inside if there is any dust built up on the card or other parts you may want to clear that at the same time.
    Luck-
    -DaddyPaycheck

  • Hp 2711x Monitor: Flickering red horizontal lines, dots, shapes

    I'm not sure if I have two seperate problems or if they are the same problem. But lately my monitor has many red horizontal lines or red dots, or random red shapes on screen that flicker slightly. They only appear on parts of the screen that are dsplaying either black or any dark colors. Any part of the screen displaying white will have no lines at all. The problem will go away temporarily if I shut off the monitor for a while.
    Also before it begins doing this, and during, the entire screen will go bank for about 1-2 seconds and then come back. It never gives an error message when it is blank. I run a dual monitor set up with my laptop display and the monitor and the lines only appear on the monitor, not the laptop display. 
    I have the most current drivers for the monitor installed. 
    The computer is a Clevo W110ER with i7 3630QM  2.4 Ghz and a 2 GB video card, running Windows 8.

    Hi Blue07,
    What is the model number of the monitor.
    I worked on behalf of HP.

  • 2nd monitor ACER LCD suddenly red

    Second monitor, an ACER AL1916W flat screen LCD, is far in the red spectrum suddenly. Haven't changed anything. Was working fine for the two weeks since we got the Macpro.
    This occurred right after reinstalling OSX, which reformatted the disk. (We have a key assignment problem we are in the middle of troubleshooting.) There was no other software on this computer other than OSX when the problem started. Now have the mac applications disk installed. Currently installing Studio 2.
    Connections seem good. Plugged into second video card from bottom as before. Don't want to try another card.
    Using 1360x768, the default setting.
    Color settings set to Adobe RBG (1998), which is a little less brilliant than the Cinema HD display setting. Using it for the Acer and the Cinema HD display.

    My cable had a bad connection. This is an old serial adapter. Maybe I'll try to fix it myself, since I'm not sure if a store would even carry one.
    Fumble with the cables to see if it corrects the problem. Check all connections carefully.
    Years ago I remember throwing out monitors that went red like this. Good thing I didn't toss this one.
    Hope this helps someone. That's what tech forum should be all about.

  • Monitor issue - PC completed but monitor shows red

    We have implemented Support Pack.  For one of the data load -  Process chain has completed and data loaded to cube but process chain log still shows red.  Please help.
    Thanks,
    Mohammed

    Hi,
    If you feel that this issue is happened due to support pack implementation then all of your process chains available in system should have monitor status as RED.
    But if you are facing issue with particular load then check the process log and job log in SM37. There might be some issues in current load, try to repeate the load and see how it works?
    Regards,
    Durgesh.

Maybe you are looking for