Monitoring thread exceeds the limit

Hi all,
I followed the sap note for Admin task of PI.
In sap note :
Start the Visual Administrator of your J2EE Engine and navigate to Server -> services -> monitoring. On the
right side navigate first to Kernel -> Application Threads Pool and then to Kernel -> System Threads Pool
Check if the ThreadPoolCapacityRate is below 100% for both, the application threads and the
system threads. Also check the maximum value in the lower part of the window and the history.
But in my case it exceeds the limit.(i.e is 150) So my question is that.
1.What is the impact if thread get increased?
2.How can i control the thread within the limit?
Please suggest for the same.
Regards
Vijay

Similar Messages

HT4863 I have an error message coming up when trying to send an email which says 'sending the message failed because you're exceeding the limit' can anyone help me to resolve this please

I have an error message coming up when trying to send an email which says 'sending the message failed because you're exceeding the limit' can anyone help me to resolve this please

Try reentering the password in your iCloud mail settings.

P6 Professional R8.3 - (Cannot move selected items because the result will exceed the limit of WBS tree maximum levels)

Hi,
Has anyone encountered this error "Cannot move selected items because the result will exceed the limit of WBS tree maximum levels"?
Please advise if there's any way around / solution to this. http://s8.postimg.org/bj900spcl/1_error.jpg
Thanks.

Thank you so much MichaelRidino!

Reader Error: There was an error opening this document. The file size exceeds the limit allowed...

The full error is: There was an error opening this document. The file size exceeds the limit allowed and cannot be saved.
I didn't think Reader had a size limit? The file is only a couple of hundred MB.
Does anyone have an idea what could be causing this error?
-Richard.

Is that an online document, or a local one?
If online, see http://answers.microsoft.com/en-us/windows/forum/windows_xp-hardware/error-0x800700df-the- file-size-exceeds-the-limit/d208bba6-920c-4639-bd45-f345f462934f

Your search query has exceeded the limit

Hi All,
While importing contact more than 1000 contact i get the following error
"Your server is not configured properly or your search query has exceeded the limit. Please check server configuration"
How i can increse the max number of contact
Any advice
Thanks in advance
Mariam

MariamS wrote:
I am importing contatct through UWC/Communications UWC/CE has a default limit of 1000 entries for the PAB. You can change this limit by setting the lookthru_limit parameter in the /var/opt/SUNWuwc/WEB-INF/config/ldappstore/db_config.properties file and restarting the web-server instance.
showrev -p | grep uwc
Patch: 118540-21 Obsoletes: 117287-99, 117819-13, 119156-07 Requires: Incompatibles: Packages: SUNWuwc
Patch: 118540-42 Obsoletes: 117287-99, 117819-13, 119156-07 Requires: Incompatibles: Packages: SUNWuwc
Can i know how i can deffrentiate between Messenger Express or UWC and Communications ExpressThe login page for Messenger Express has a title of "Sun Java System Messenger Express".
Regards,
Shane.

Error from libf4f.dll: Total number of messages waiting to be recorded has exceeded the limit

My core.log file keeps showing these errors everytime I start to stream. My streams are not viewable on PC's and only viewable on iOS devices.
Is there something wrong with the libf4f.dll file? I'm using FMS 4.5 on Windows 2003 Server.
2011-12-28    15:44:09    4020    (e)2611178    Error from libf4f.dll: Total number of messages waiting to be recorded has exceeded the limit.    -
2011-12-28    15:44:09    4020    (e)2611423    Failed to record bbc2011-BBC73 (Unknown Error).    -
2011-12-28    16:02:00    4020    (e)2611178    Error from libf4f.dll: Total number of messages waiting to be recorded has exceeded the limit.    -
2011-12-28    16:02:00    4020    (e)2611423    Failed to record bbc2011-BBC71 (Unknown Error).    -
2011-12-28    16:57:12    4020    (e)2611363    Server detected a backward timestamp from 5006873 to 0 in file: C:\FMSHOME\applications\livepkgr\streams\_definst_\bbc2011
2011-12-28    17:18:21    4020    (e)2611178    Error from libf4f.dll: Total number of messages waiting to be recorded has exceeded the limit.    -
2011-12-28    17:18:21    4020    (e)2611423    Failed to record bbc2011-BBC83 (Unknown Error).    -
2011-12-28    17:36:12    4020    (e)2611178    Error from libf4f.dll: Total number of messages waiting to be recorded has exceeded the limit.    -
2011-12-28    17:36:12    4020    (e)2611423    Failed to record bbc2011-BBC81 (Unknown Error).    -
2011-12-28    18:38:09    4020    (e)2611363    Server detected a backward timestamp from 5420086 to 0 in file: C:\FMSHOME\applications\livepkgr\streams\_definst_\bbc2011-BBC82    -
2011-12-28    19:12:44    4020    (e)2611178    Error from libf4f.dll: Total number of messages waiting to be recorded has exceeded the limit.    -
2011-12-28    19:12:44    4020    (e)2611423    Failed to record bbc2011-BBC92 (Unknown Error).    -
2011-12-28    19:23:38    4020    (e)2611178    Error from libf4f.dll: Total number of messages waiting to be recorded has exceeded the limit.    -
2011-12-28    19:23:38    4020    (e)2611423    Failed to record bbc2011-BBC91 (Unknown Error).    -
2011-12-28    20:41:50    4020    (e)2611363    Server detected a backward timestamp from 6390123 to 0 in file: C:\FMSHOME\applications\livepkgr\streams\_definst_\bbc2011-BBC93    -
2011-12-28    21:12:05    4020    (e)2611178    Error from libf4f.dll: Total number of messages waiting to be recorded has exceeded the limit.    -
2011-12-28    21:12:05    4020    (e)2611423    Failed to record bbc2011-BBC102 (Unknown Error).    -
2011-12-28    22:49:23    4020    (i)2581247    Core (4020) disconnected from edge.    -
2011-12-28    22:49:23    4020    (i)2581233    Core (4020) disconnecting from admin: 200.    -
Thanks,
Dave

There is a concept of Absolute Time Code which enables the encoders to publish the livestream based on absolute system time rather than starting the messages from timestamp 0 everytime you append to a recording.
I suspect you encoder is starting everytime from 0 timestamp but since the server already has recording till some time - say x, for the server these are backward timestamps and hence the continous warnings.
Also to safeguard FMS against such conditions and cause memory crashes, we only allow messages with backward timestamps to accumulate in the process queue upto a limit and then the recording is stopped. Thats why you are observing the errors -
"Error from libf4f.dll: Total number of messages waiting to be recorded has exceeded the limit.    -
2011-12-28    19:23:38    4020    (e)2611423    Failed to record bbc2011-BBC91 (Unknown Error).    -"
Try to check your encoder settings for stream synchronization or ATC settings and enable them.

When purchasing from itunes we exceeded the limit and think we remembered the answers and rescue email address is incorrect.

when purchasing from itunes we exceeded the limit and think we remembered the answers and rescue email address is incorrect.

You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(102358)

Scan rate exceed the limit?

the program runs good when we use 600000hz as scan rate,but it gives error when we use 700000 hz as scan rate, saying that the scan rate exceed the hardware limit. but the manual of the hardware(DAQ board), gives 1250000 hz as the upper limit of scan rate.what is the possible true reason for this error?

When entering the scan rate, you have to take into account how many channels you are scanning to determine the sampling rate. For instance, when scanning 3 channels at 700000 Hz, you are scanning through all 3 channels at 700000 Hz and so you're trying to make the board sample at 700000*3 Hz (2100000 Hz). This exceeds the limit of the hardware.
Even at 600000 Hz (sample rate of 600000*3 = 1800000 Hz) you are above the maximum sampling rate. 1250000 is specified maximum sampling rate but sometimes you can acquire above the maximum rate. I hope this helps.
Regards,
Todd D.
Applications Engineer
National Instruments

I used the iTunes match workaround and now want to start over, but I am being told I have exceeded the limit even though I completely cleared the match cloud, mindful of the 1000-delete-at-a-time limit....what should I do?

I have over 25k songs in iTunes. I originally tried the "create a second library" solution. I reduced to less than 25k songs and successfully ran iTunes match. Then I discovered the limitations of the second library solution regarding adding more music, managing playlists, and turning back on my main library and being greeted with all sorts of problems.
So, I created a blank library, ran iTunes match, and its showed me all of my files in the cloud that had been matched or uploaded. I deleted all of the files, mindful of the 1000 file limit per delete. I have confirmed I have now deleted them all. An iTunes match update says I have no files in the cloud. Perfect.
I reduced my library again, this time using the superior method of just changing the files I do not want to match to voice memos. That is done. I have less than 25 k songs.
I waited 2 days and ran match again. Yikes. It did not let me match or upload anything, and every music files's cloud status just says "exceeded limit," despite the fact that my cloud is devoid of music and I have no access to any music via match.
I am in a limbo where I have nothing in the cloud from match, but I can't add anything because match says I exceeded my limit.
I emailed customer support, and got back a useless email linking me to a very general article about iTunes match. I called customer service and they said this was something the iTunes store people would need to address, and they can only be contacted by email. Sigh . . . .
Any thoughts?
Thanks

Have you confirmed that you successfull purged iTunes Match by also looking on an iOS device? If so, keep in mind that Apple's servers may be experiencing a heavy load right now. They just added about 19 countries to the service and I've read a few accounts this morning that suggests all's not running perfectly right now.

Warning: you have exceeded the limit of 100 nested folders

in red letters in Disk Utility. Machine slows and slows. Where, how, why, and whence do these folders get nested? and how to unnest, which one doesnt know which they are or where they are, out of thousands of folders? No utility out there can help, it seems.
Jascha Kessler

I have the exact same problem. I have an iMac G3,
600MHz, 512MB RAM, 40 GB capacity, running 10.4.7. I
have been using Apple Macs since their innovation.
My computer is running a little slower, but I do not
know if "Nesting of folders has exceeded the
recommended limit of 100" is the culprit.
I use Photoshop (on 9.2.2) quite a lot, but otherwise
I use 10.4.7 all the time for everything else. I have
searched the Information pages and Discussion panels
for an explanation and solution, all to no avail.
Nothing dastardly appears to have happened or about
to happen to my computer, so I shall just keep on
using it regardless. In the meantime, however, I
shall keep looking for an explanation and I hope, a
solution.
iMac
Mac OS X (10.4.5) 600 MHz Power PC G 3 512 MB
SDRAM
thanks for your interest. I dont know what causes all those nested folders; but I am on 10.4.8 now and no change in (mis)behavior. I run a G4 with now with 1600 speed from a replaced heart or whatever, and have 1.25 G Ram.. I find that I can locate all Empty folders with Spring cleaning, and delete them and get the machine running better and normally. I also clean up regularly with DISK WARRION, which seems to be hecessary, as well as Drive Genius from ProSoft Engineering. Meanwhile, I buy lottery tix, in hopes of a later Mac Pro desktop
Jascha Kessler

How does one reduce the size of a photo on iphoto? I want to post images on my website, but they exceed the limit.

How does one reduce the size of a photo on iphoto. I want to post images to my website but they exceed the limits.

Select the photo(s) and export (file menu ==> export) them. You can change the size there setting a maximum pixel dimension and/or reducing quality
LN

5.000,00 exceeds the limit 100,00 for condition type PR00.

Please help me to resolve this problem as I am not able to find where sud I go to delete the upper and lower limit of condition type PR00..Whene I maintain the record for pr00 for different material it create a error with limits.

Hi
What error message you are getting? Can you check if you have maintained anything for PR00 in SD > Basic Functions > Pricing > Define condition types > Maintain upper and lower limits.
Thank$

HT4863 How long does a block on sending messages last after exceeding the daily limit ?

I exceeded the limit while restoring my Mac and re-instantiating all my email Filters.
This is a bit of a surprise but, hey, lesson learned.
My question is, how long does this block last for ? Is it lifted automatically after
24 hours or do I need to contact someone at Apple ?
Thanks !

iCloud Camera Roll Backup Size:
Settings > iCloud > Storage & Backup > Manage Storage > (name) iPhone 5S > under Backup Options Camera Roll is 1.7gb
(sorry, I rounded to 2gb for simplicity earlier)
iPhone Camera Roll Backup Size:
Settings > General > Usage > under Storage > Photos & Camera > under Photos & Camera the Camera Roll is 835 kb
(essentially 0 kb, and there are 0 photo/vid under Camera Roll in Photos app)

PDF exceeding page limit at 100 pages??

I am trying to export a pdf and it is telling me it exceeds the page limit and it will resize accordingly. I have saved the same document several other times and have not received this message. It is only 100 pages, so it does exceed the limit. I need to save this and I dont have much time. HELP!!

Not good. Sounds like you've been bitten by the bug that loses track of geometric bounds. Make a copy of the file for backup, then delete the "empty" pages and replace them with new ones (you can add them at the end of the story thread if you don't have un-anchored images on your pages), then reflow the overset text and replace any images that got lost. Do a Save As to a new file name and hopefully the file will be OK.

ITunes Match exceeded 25k limit question

Hi,
My iTunes library exceeded 25k songs, and so I went through and deleted quite a lot of albums - when you right-click an album though, it doesn't ask you if you also want to delete the songs from iCloud - I think from experimenting that I should have selected the individual songs instead - however, I've taken my local library down to 24k now but it's still saying my iCloud exceeds the 25k limit.
Any ideas on what I should do next - is there an option to manually manage my iCloud collection for instance?
Thanks
I'm on OS X 10.9.5, and the latest version of iTunes FWIW.

Hi,
This is a draft of a user tip I intend posting. Does it help?
"iTunes match has a limit of 25k tracks for tracks matched or uploaded. iTunes purchases do not count towards this limit.
Can you have iTunes match and an iTunes library with more than 25K?
Yes but you need to manage your library so that you keep matched and uploaded tracks below 25k. With iCloud status column added to song view (go to menu > view > view options and tick appropriate box), you can tell what has been matched, uploaded, purchased, ineligible, duplicate or waiting. You can also have a "Removed" status. Such files are ignored when match scans your library.
I achieved this by creating a second blank library - I signed into match and was able to view all tracks in iTunes Match. iTunes: How to open an alternate iTunes Library file or create a new one
I then deleted some tracks from this library - effectively deleting tracks in the cloud. They were not deleted from you hard drive and will still appear in your original library. This method works well if you have a second computer on which your library only shows tracks in the cloud.
When I went back into my original library, the iCloud status for those tracks were shown as "removed". iTunes Match will now ignore those tracks. You can now add new tracks provided you kept matched and uploaded to less than 25k. I keep a smart playlist any track with iCloud status = matched and any track with iCloud status.
If you have exceeded the limit, the iCloud status will tell you so but even after you have deleted the excess tracks, you might still get this message. You may find that using the above method will fix the problem BUT i can not verify this. If you back up your library regularly to may be able to restore the iTunes library.itl from a time immediately before you first had exceeded limit problem."
Jim

Monitoring thread exceeds the limit

Similar Messages

Maybe you are looking for