Monthly  Attendace Report

Hi Guru's,
Can  any  one of you  please provide me with  the sample program  that  gives the output  of the monthly  attendace of a particular  employee which  includes Infotype 2001,2002,2010 0007 ....
Helpfull  answers will  be rewarded..
Thanks,

Hello,
Dont know how to create in SAP Query. If your looking for ABAP query then can give some input
You will have to a combination of QALS, QAVE, MARA Tables
1) In QALS you will get all the lots created for particalur month when you pass from to  date in PASTRTERM (start date).
2) Get the number of entries for the lot
3) Pick up material also from QALS (MATNR).
4) Pass MATNR in MARA to get the material Type (MTART)
5) Pass the insepction lots to QAVE ( sorted for Material type) to get the UD codes for the inspection lots. ( Accepted or rejected)
6) Calculate % Rejected
7) Check number of entries in QAVE table also
8) Calculate % Test = Number of entries of lot in QAVE table / Number of entries of lot in QALS table
Regards
gajesh

Similar Messages

  • Monthly performance report

    Dear All
    I want to generate Monthly performance report for the QM activity.. as per the below table.
    Please suggest the right way to create this query.
    Inspection description            Accepted           Rejected           Rejected %        Under test
    Raw Material                       
    Packing Material
    In-process samples
    AYK

    Hello,
    Dont know how to create in SAP Query. If your looking for ABAP query then can give some input
    You will have to a combination of QALS, QAVE, MARA Tables
    1) In QALS you will get all the lots created for particalur month when you pass from to  date in PASTRTERM (start date).
    2) Get the number of entries for the lot
    3) Pick up material also from QALS (MATNR).
    4) Pass MATNR in MARA to get the material Type (MTART)
    5) Pass the insepction lots to QAVE ( sorted for Material type) to get the UD codes for the inspection lots. ( Accepted or rejected)
    6) Calculate % Rejected
    7) Check number of entries in QAVE table also
    8) Calculate % Test = Number of entries of lot in QAVE table / Number of entries of lot in QALS table
    Regards
    gajesh

  • Monthly Performance Report PP

    Hi BWers,
            I need give an monthly performance Report on PP. Can you please tell me wether these fields are from PP only orelse I need to go for any other modules for datasources. Please let me know which datasources , Fields and Cubes I should use exactly for this report.
    This is the end user Requirement.
    Daily Production
    Day Worked
    Profit
    Total Profit/Loss
    Details of Difference
    Efficiency
    Due to Grasim Power
    Power Failures
    Non/Better availability of Power
    Grasim Load Shedding
    Shifting of Power to Membrance Cell
    Due to less power availability (EC-1 fire 19th)
    Water Crisis
    Breakdown
    Shutdown
    Due to higher CL2 Stock
    Sub Total
    CL/HCL Prod. In comparison to Purta Mix
    Power & Steam Consumption
    Quantity Gain/Loss
    Cell Power
    Aux. Power
    Steam
    Current Density
    Rate Gain/Loss
    Power Rate Loss due to higher average power rate
    Steam
    Sub Total
    Raw Material & Aux. Material
    Quantity Gain/Loss
    Salt
    Sulphuric Acid
    Brine Purification Cost
    CL2 Disposal
    Rate Gain/Loss
    Salt
    Soda Ash
    Realisation
    Caustic
    Quantity Gain/Loss
    Outside Parties & All Group Units
    Rate Gain/Loss
    Outside Parties & All Group Units
    Own Consumption
    Chlorine
    Quantity Gain/Loss
    Rate Gain/Loss (Excl cost of Pkg)
    Hydrochloric Acid
    Quantity Gain/Loss
    Rate Gain/Loss
    Gain/Loss in Special Repairs due to lower/higher repairs (Land filling expenses)
    Gain/Loss in Interest (Working Capital)/Term Loans
    Gain/Loss due to less/more Selling & ADM Overheads
    Other Income (EC-1 Fire Claim)
    Gain/Loss due to decr./incr. in Stock/Valuation
    Gain/Loss due to less/more Salary/Wages
    Thanks & Regards
    KLC

    HI
    i think first you need to check where exactly this is stored in R/3 for example go to the screens where they are storing then it will be easy for you to identify functional areas as well as the tables involved in
    and i don't think we have any fields like salt, hydrocholic acid...they all come under material which are used for production..
    so better first go like this
    thanks and regards
    Neel

  • Weekly/Monthly Snapshot Report

    Hi,
    I have now three cubes Daily,Weekly and Monthly cubes...
    I had made copy of the daily cubes as weekly and monthly.. There is no difference as such structure wise...
    But what extra i need to do to make these weekly snapshot report and monthly snapshot report..
    Now all three cubes are added in multiprovider and multiprovider was used in the definition of the query..
    For daily cube report though, i had simply restricted infoprovider as daily cube and designed the query..
    But what about weekly and monthly snapshot reports?
    as snapshot reports are basically meant for comparing time periods how i could achive the same in reporting?
    What i am contemplating as follows:
    1) Since these are comparing different times ( for weekly snapshot, you must have at least two different weeks of data to compare ) i guess we need to include a time chararistic 0CALWEEK for Weekly snapshot, 0CALMONTH for Monthly snapshot..
    But even after including this time charactristic, how i would be comparing?
    i am not clear on how to creata a snapshot report
    What one has to do in the weekly and monthly cube to be able to compare the data on weekly/monthly basis?

    Simran,
    Weekly Snapshot means entire data has to restated against each week.
    For example to check open orders status week wise, entire open orders(till end of current week) has to restate against current week. at end of the week, need to pass remaining open orders as next weeks snap shot.
    In this way we will get snapshoting of open orders week wise. We can use these weeks to compare.
    For weekly snapshot add week to cube, and at end of each week pass current week closing balances as next week opening balances + transactions in that Week gives snap shot of that week.
    For example Check: [HOW TO HANDLE INVENTORY MANAGEMENT SCENARIOS IN BW (NW2004)|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328]
    Snapshot scenario.
    Hope it Helps
    Srini

  • Daily/weekly/monthly production reports

    Hi Experts,
    IMy client needs daily/weekly/monthly production reports with graphical representation. I want to know in acase there are any standard reports which will be a work around solution for the above said reports.
    Thanks

    Hi nandi6346,
    Yes, COOIS : Order informaton system, it self gives graphical representation for production reports.
    Go to COOIS - execute as per required date, to get grafical representation select the coloumns you required, e.g. Production order, target qty, Confirmed Qty, Delivered Qty, Scrap Qty, etc and the click on "Display Grafic" tab, it will show you grafical report.
    Tara

  • Monthly Production Report for Excise

    Dear All,
    I need a monthly production report for Excise purpose as per Indian statutory requirement.
    The requirements are
    1] There should be a date range to select the period of the report
    2] It should show a report only  on those items which are marked as 'sales item' in the item master data [ so that all the other intermediaries / WIP's willn't appear in the report.
    3] If one item is produced / manufactured using different production orders, We need a consolidated quantity for the period under selection.
    Report Format :
    Item code   - Item Description  - Planned Quantity  - Manufactured Quantity - Open Quantity
    Thanks in advance,
    Regards,
    Suresh Kannan

    Hi Suresh,
    Try this query
    SELECT T0.ItemCode, T1.ItemName,
    SUM(T0.PlannedQty) 'Planned Qty',
    SUM(T0.CmpltQty) 'Manufactured Qty', SUM(T0.PlannedQty-T0.CmpltQty-T0.RjctQty) 'Open Qty'
    FROM dbo.OWOR T0
    INNER JOIN dbo.OITM T1 ON T1.ItemCode = T0.ItemCode AND T1.SellItem = 'Y'
    WHERE T0.RlsDate >=[%1] AND T0.RlsDate <=[%2]  and T0.Type != 'D'
    GROUP BY T0.ItemCode, T1.ItemName
    Regards,
    Bala

  • Monthly Tonnage report

    Hi Gurus,
                 Can anyone please let me know what all the fields needed to do Monthly Tonnage report.
    If you have program please send it to me .
    I want to do the report for the same.
    Thanks ,
    Ashok...

    Hello,
    Dont know how to create in SAP Query. If your looking for ABAP query then can give some input
    You will have to a combination of QALS, QAVE, MARA Tables
    1) In QALS you will get all the lots created for particalur month when you pass from to  date in PASTRTERM (start date).
    2) Get the number of entries for the lot
    3) Pick up material also from QALS (MATNR).
    4) Pass MATNR in MARA to get the material Type (MTART)
    5) Pass the insepction lots to QAVE ( sorted for Material type) to get the UD codes for the inspection lots. ( Accepted or rejected)
    6) Calculate % Rejected
    7) Check number of entries in QAVE table also
    8) Calculate % Test = Number of entries of lot in QAVE table / Number of entries of lot in QALS table
    Regards
    gajesh

  • How to monthly wise  report in XL -Reporter

    Hi,
    How to define monthly  wise report &
    How to use date function in XL-Reporter.
    thanks.
    Ruheena Tasneem

    Dear Rubeena
    You can define parameter Date as follows
    In Advanced Report Builder Select Parameter
    a window will be opened, There Click New
    Name         Category         Type      Attribute            Default Value            Prompt
    Sdate         Literal             Date                                                              Enter Starting Data
    Edate         Literal             Date                                                              Enter End Date
    Regards
    Rashid

  • Monthly Trend Report with YTD.

    Hi gurus,
    In my query, I want the previous year sales to be displayed along with current year sales and growth.
    Now, I have to create a monthly trend report along with YTD values in the end. Months should be drilled across by default. In the end, there should be YTD values as well (for the same Key Figures).
    The report output should look as follows (run for only two months say April 09 and May 09, YTD would be till April 09 to May 09)
                           Apri 09                 May09                YTD Value
    Sales District 1       KF1   KF2  KF3          KF1  KF2  KF3        KF1  KF2  KF3   
    Considering that for Previous Year, I just want Net sales (not other KF's) & that the report should have the complete month wise trend along with YTD, I cannot create a structure as well.
    Can anyone please tell me how to go about achieving it.
    Thank & rgds,
    Sree

    Hi,
    Using Customer Exit we can do it, see the Blogs and Articles related to Customer Exit Variables..
    http://wiki.sdn.sap.com/wiki/display/profile/Surendra+Reddy
    Using Text Variables with Customer Exits in Report Headings
    https://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/13221; [original link is broken] [original link is broken] [original link is broken]
    Customer Exit Variables in BW/BI Reports
    Using Customer Exit Variables in BW or BI Reports Part - 1
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/s-u/using%20customer%20exit%20variables%20in%20bw%20or%20bi%20reports%20part%20-%201.pdf
    How to use Customer Exit Variables in BW Reports: Part - 2
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/g-i/how%20to%20use%20customer%20exit%20variables%20in%20bw%20reports%3a%20part%202.pdf
    Using Customer Exit Variables in BW/BI Reports Part - 3
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/10fc4382-afa6-2c10-1380-fa224fe4324f&overridelayout=true
    Using Customer Exit Variables in BW/BI Reports: Part - 4
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0fefc77-40e3-2c10-8da3-d4bfcb013387?quicklink=index&overridelayout=true 
    Calculating the Ageing of the Materials
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/a-c/calculating%20the%20ageing%20of%20the%20materials.pdf
    Thanks
    Reddy

  • Running monthly stock report

    i want to run a monthly stock report that will show me the opening stock.opening vales,total receipt stock,total receipt value,total issue quantity,total issue value,closing stock quantity and closing stock value.....Using MB5B does not give me the actual monthly stock

    Dear,
    Using MC.9 you can get this data (subject to infostructures properly updated).
    With help of Switch to Drill down and Time series you can achieve this.
    Try.
    Regards,
    Syed Hussian.

  • Daily & Monthly Backlog Reports and Printing program

    •     <b>Labeling program for Deliveries</b>: This program picks all deliveries created/updated on the current day, validates them by checking whether they have the required labeling information. If the program finds that the labeling information is missing, it populates WMS structures (header & detail) for further.
    •     <b>Daily & Monthly Backlog Reports and Printing program</b>: This program calls 2 separate reports (Daily & Qtrly. Backlog Reports), based on user selection, and directly prints the reports as well as converts them to PDF format and emails them as attachments to the MD.
              Please provide me the solution.

    For First program :
    Use table LIKP (SD Document: Delivery Header Data) & LIPS(item Data) for fetch inf all the data for selected date use field ERZET(Entry time) & ERDAT(Date creation of record) for created deliveries & refer TABLES - CDPOS and CDHDR for modified deliveries
    For Second object:
    Call multiple programs by using SUBMIT <program> with selection screen params.
    Print as per requirement by passing print parameters to Structure PRI_PARAMS &
       call function 'GET_PRINT_PARAMETERS'                     
       exporting destination = liprintr                         
                 mode        = 'CURRENT'                        
                 no_dialog   = 'X'                              
       importing out_parameters = pri_params.                       
    *To Convert ABAP List and SAP Script to PDF files use program - "RSTXPDFT4"
    ALSO REFER this nice weblog >
    /people/erwan.lebrun/blog/2007/04/16/tips-tricks-email-fax-through-the-same-output-type
    Hope it will help.
    Vishal
    Message was edited by:
            Vishal Tyagi

  • Error in monthly performance report.

    hi friends , we have developed a monthly perfrmance report for equipments displaying different fields like working hours,availbale hour(per month),HSD(per hour),Spares(per month ),spares(per year) etc. But for some of our plants those wer created after the development of the report, it is not working fine and that too for particular period (mm/yy) 10/2009 to 03/2010.
    The report is mainly based on log book entry.
    can anybody guide where could be the problem.It is quite clear that the problem is with some entry in the functional module as it is working fine for some plants, The report is working fine on the quality server for the given period.In report user just have to enter month and year,plant for which he wants to see the report.

    one strange thing i noticed is that , the z table from which the data is displayed on the report is taking entry for (mm/yy) in selection wrongly.say if user enter the mm/yy as : 10/2009 then the data is stored as 10/2010 for these particular plants not for all plants.. means there is prblem with fiscal year.
    I am not able to track the entry which could be common for plants or log book entry.
    ALso the problem is only for all recently created plants.
    Can anybody tell me that which entry can cause this because in ztable all the enteries are copied from standard tables and then stored in a ztable and finaly displayed in the report.
    Edited by: achalmehra on Jan 19, 2010 6:53 AM

  • US Year end and month End Reporting

    Hi
    Can anyone share the year end and the month end reporting setup Metalink Note#
    or if anybody can refer any document which will give the Setup and the Balance details would be great
    thanks for the time
    Regards
    Ramesh Kumar S

    Check the Note# 245295.1 if this can help you.

  • Compare turnover actual month with previous month on monthly based report

    Hello Gurus,
    please help me with the following requirment:
    In have a monthly based report with key figure 'turnover'. Now I want to calculate deviation turnover actual month vs turnover previous month from last year. How to handle this?
    Example:
                             CalYear/Month     
                             01.2010   02.2010   03.2010   04.2010
    Turnover              10            20            15            20
    Calculated          xxxx         xxxx       xxxx         xxx
    Thank you very much!
    Muammer

    Hello voodi,
    it doesn't work. With offset function it shows the turnover only in the columns from last year. I need the turnover from last year in the columns from this year. Any ideas?
    Expected:
                                   CalYear/Month
                                         01.2010   02.2010   03.2010   04.2010
    Turnover                          10            20            15             20
    Turnover last year        xxxxx      xxxxx      xxxxxx    xxxxx
    With offset -12
                                CalYear/Month
                                          01.2009         02.2010     ...               01.2010   02.2010   03.2010   04.2010
    Turnover                           20               50           ....                    10            20            15             20
    Turnover last year            20               50           ...                  blank         blank       blank         blank
    Thank you!
    Muammer

  • 12 month Trend Report

    Guys,
    Does any one know what does the 12 Month Trend report functionality in Hyperion Financial Reporting.
    Thanks.

    Thanks,
    In my report we are displaying Forecast values from Jan:DEC and verifying whether the DECATD(which is sum of Jan:DEC) is equal.

Maybe you are looking for