MOPZ selecting technical usages with JAVA pre-requisite

Hello all,
Upgrading from 46C to EHP5. Some of the desired technical usage require both ABAP and JAVA system. For example, HCM_Learning Solution has the following pre-requisites
- SAP Learning Sol-Client (Lern, Auth, CP) - all JAVA
- Learning Solution (ABAP)
- SAP Learning Sol-Frontend ABAP
- Portal Content (Java)
So cannot select it in MOPZ since the 46C is not connected to a JAVA instance.
It means the ABAP side reqires two-step upgrade (1) upgrade to EHP5 without the HCM_Learning Solution, then (2) connect to a JAVA instance, select it it in MOPZ, then another ABAP upgrade with HCM_Learning Solution.
Any suggestion how to do the ABAP side in single step - i.e. include the Learning Solution (ABAP and the SAP Learning Sol-Frontend ABAP, then just create the JAVA instance after the ABAP upgrade? Is this a valid scenario?
Regards,
Terry

Hi,
Workaround of this situation is:
Add As Java usage type as well in system definition in SMSY. As a result you will be able to select these usage type as well in MOPZ. But it will give you Java packages as well. You can ignore those packages. And then you can carry out upgrade in a single step.
Thanks
Sunny

Similar Messages

Computers with Java pre-installed

I am working with a customer looking to purchase a numnber oif PCs for a Java application and am looking for a list of namer brand computers that come with Java pre-installed. I know Dell pre-installs Java, but they are particularly interested in HP systems. Does anyone know of a comprehensive list of PC verndors who pre-install Java, and if not, if specifically HP pre-installs?
Thanks,
Greg

Thanks for the replies. I know it is easy to install, we are a Java developer, it's just a question from my customer. This sort of information should be made readily available by Sun.
Anyone have any idea about HP?

Cannot select Technical Usage "Learning Solution - ABAP only" on ECC Server

Dear Gurus,
        My environment are
        a SAP ERP System(ABAP only) in SMSY with
               Product Version = "SAP ERP 6.0"
               Main Instance = "SAP ECC Server" (as Relevant)
                       Note When I select another Relevant for "SAP Learning Sol-Frontend"
                                   Use in logical components; action not possible (see long text)
                                   Message no. SMSY_EDIT_LANDSCAPE413
                                   ... There can only be one relevant ABAP-based main instance. ...
        Select Product Version = "EHP4 FOR SAP ERP 6.0 / NW7.01"
        and Target Stack = "SAP ERP Enhancement Package 4 on NW7.01 - SP Stack 04"
        Existing Technical Usages are
                 - Central Applications
                 - ERecruiting on ECC Server
                 - Financial Supply Chain Mgmt
                 - Human Capital Management
       But I can't add Technical Usage for "Learning Solution - ABAP only" or "HCM - Learning Solution" (The checkbox is in gray color so I can't check it)
       What am I wrong? Please advice.
Best regards,
Choosak

Hi Choosak,
Try this ,
Go to SMSY transaction then select your system .
In right side you will get the screen where all usage types are defined for your system.
Select learning solution and HCM and save it.
Go back to your solution and see whether you can see Learning solution after that.
Thanks,
Gerard

Query while selecting Technical usages

Hello All,
We are in the process of implementing EHP4 SP04. The customer has provided us some Technical usages that needs to be implement.The customer wants to know the possibilities that if in future there require some more Technical usgaes which were not selected while installing EHP4 , how we can implement that new Technical Usages .
Regards
Anthony

Dear Anthony,
please have a look at the technical FAQ, chapter 4.5 and 4.6:
http://service.sap.com/~sapidb/011000358700000931872009E
Best regards,
Christian.

Help with installing pre-requisite packages on Red Hat Linux

Having issue with installing packages with yum
OS is RHEL 6 and following package which are prerequisites for Oracle Fusion Middleware install on Red Hat Linux 6
uname details as follows
2.6.32-220.el6.x86_64 #1 SMP Wed Nov 9 08:03:13 EST 2011 x86_64 x86_64 x86_64 GNU/Linux
Example error: yum install gives error as follows for all packages.
No package compat-libcap1-1.10-1 available
Need to install following packages (as mentioned in the prerequisites)
binutils-2.20.51.0.2-5.28.el6
compat-libcap1-1.10-1
compat-libstdc++-33-3.2.3-69.el6 for x86_64
compat-libstdc++-33-3.2.3-69.el6 for i686
gcc-4.4.4-13.el6
gcc-c++-4.4.4-13.el6
glibc-2.12-1.7.el6 for x86_64
glibc-2.12-1.7.el6 for i686
glibc-devel-2.12-1.7.el6 for i686
libaio-0.3.107-10.el6
libaio-devel-0.3.107-10.el6
libgcc-4.4.4-13.el6
libstdc++-4.4.4-13.el6 for x86_64
libstdc++-4.4.4-13.el6 for i686
libstdc++-devel-4.4.4-13.el6
libXext for i686
libXtst for i686
FYI: If this forum is not appropriate please let me know appropriate forum and shall repost there.

Hey,
Normally I use YUM : http://taliphakanozturken.wordpress.com/2012/03/17/how-to-use-yum-to-install-rpm-packages-with-dependencies/
Let me know if this is what are you looking for.
I hope it helps you,
Thiago Leoncio.

Selection of EHP4 technical usages are all greyed out

Good day
We are currently on ERP6.o SPS 6 and would like to upgrade to ERP 6.0 EHP4. Our system has been defined in SMSY in Solman as an ERP 6.0 system. In selection of Main Instances, ECC Server has been selected as relevant.
In mopz, we create a new maintenance transaction, choose the product version as ERP 6.0 and select our systems. On the next screen we choose "Enhancement Package Installation" and then "find download files".
In the next screen we select the product version and target stack. However, all technical usages are greyed out. When I scroll over it it states that Required Main Instances are SAP ECC Server. Why is it not recognizing the ECC Server as main instance as per smsy?
Please assist.
Thanks
Wilhelm

Hello,
Make sure that following things are OK :
- Solution Manager should be patched to the latest release
- The ERP 6.0 system must have the product version SAP ERP 6.0. Make sure that it is not accidentally maintained as SAP ECC 6.0.
Also have a look at these OSS-notes:
SAP Note 1122966 Maintenance Optimizer: Notes for Enhancement Packages
SAP Note 1287216 Maintenance Optimizer: pre-select technical usages
SAP Note 1139602 Several enhancement package releases on one system
SAP Note 1134872 Maintenance Optimizer: FAQ for Stack Delta Files
SAP Note 1233954 Maintenance Optimizer: No XML Generated in EPS Inbox
SAP Note 1172948 SAP Solution Manager - Basic functions
Wim

MOPZ - EhP 3 -- EhP 4 - technical usages - ambiguities

http://service.sap.com/solutionmanager
--> FAQ
<...>
What are the benefits of Maintenance Optimizer?
Maintenance Optimizer simplifies the management of patches for the customer's SAP support staff and helps to reduce maintenance costs.
<...>
vs.
Note 1287216 - MOPZ: pre-select technical usages
<...>
The detection process implies some unavoidable ambiguities. It's a requirement to check manually, whether all of the highlighted technical usages have to be installed!
<...>
Although MOPZ has pre-selected the technical usages, user need to be careful of the selection. It's based on guess and not exactly correct.
<...>
- From where and how do I get the dependencies between the packages (e. g. the example that CWM needs FINBASIS, SEM-BEW and SAP_APPL)
- Why does MOPZ not resolved those dependencies automatically? If I need to do that manually, what is then the use of having MOPZ?
Markus

no answer - closing thread.

Technical Usage for SAP ERP 6.0 EhP4

Hello gurus,
I am planning to upgrde my system EC2 which is an SAP ERP 6.0 on an Oracle10g database with OS Windows Server 2003.
But I dont know which technical usage to choose.
Using the url http://<hostname>:5<instance number>00/utl/UsageTypesInfo, the following are my system's usage types:
SAP ERP 2005/SR2     XSS     XSS     Self Services
SAP ERP 2005/SR2     LSOCP     LSOCP     Learning Solution Content Player
SAP ERP 2005/SR2     BD     BD     Biller Direct
SAP ERP 2005/SR2     XECO     XECO     Extended E-Selling Components
SAP ERP 2005/SR2     ECC     ECC     Central Component
SAP ERP 2005/SR2     BP-ERP     BP ERP     Business Packages (Portal Content)
SAP NetWeaver 2004s/SR2     PI     PI     Process Integration
SAP NetWeaver 2004s/SR2     BI     BI Java     BI Java
SAP NetWeaver 2004s/SR2     AS     AS Java     Application Server Java
SAP NetWeaver 2004s/SR2     EPC     EP Core     Enterprise Portal Core Components
SAP NetWeaver 2004s/SR2     EP     EP     Enterprise Portal
SAP NetWeaver 2004s/SR2     AAS     AS ABAP     Application Server ABAP
There seems to be no direct equivalent of these usage types in the technical usages I see on MOPZ.
Please advise.
Thanks, Cha Cha

Hello,
You may check the attachments in note 1165438 for business function -> technical usage equivalence.
as for usage types, you seem to have listed product instances instead. Perhaps you can also have a look at the product instances -> technical usages equivalences in the attachments to note 1165438
Anyway, the technical usagesI can see right away are:
- SAP Learning Sol-Frontend CP
- XSS Self Services
- SAP FSCM - Biller Direct
- Central applications
- SAP XECO
Netweaver 7 app server ABAP, Netweaver PI, and Enterprise Portal product instances don't have any additional technical usages assigned.
I suggest also the service http://service.sap.com/bfp for a free service that will help you to select technical usages in your EHP4 install.
Best regards,
Miguel Ariñ

SAINT or SAPEHPI to add additional technical usages?

I'm not sure whether to use SAINT or EHPI to add additional technical usages. I've seen comments recommending both ways but haven't found anything definitive from SAP. Note 1298878 "Installation of SAP Enhancement Package 5 on SAP ERP 6.0" says in section VII/...SAINT Passwords:
"These passwords are only required, if you install additional technical usages with SAINT. This is only possible for systems, which have the technical usage "Central Applications" already installed."
It then lists some components but it isn't really clear that all components should be installed with SAINT. Is there any definitive documentation I'm missing? Thank you,
David

I found it!
On page 30 of the document "How to Install SAP Enhancement Package 5 for SAP ERP 6.0. A Practical Guide" it says
Installation of Additional Technical Usages
ABAP
To install additional technical usages after you have already installed technical usages of enhancement package 5 with SAPehpi, use the following tools:
- If the technical usage Central Applications of enhancement package 5 is already present in your system, use transaction SAINT. Make sure you import the newest SPAM/SAINT update before installing additional technical usages with transaction SAINT. You also have to generate a stack configuration file with the SAP Solution Manager Maintenance Optimizer. If you want to use the parallel import feature of R3trans, follow the instructions of SAP Note 1309506.
- If the technical usage Central Applications is not yet installed in your system, use the SAP Enhancement Package Installer.
Good luck all,
David

Technical Usage Selection

Hello All,
We are upgrading our 4.7 to ECC 6 Ehp4 . Once Upgrade is complete, our next Project is Implementation of ESS, MSS.
So 2 separate landscapes,
1) Portal with EP and EP Core -for ESS, MSS :- Separate Hardware is Procured. Installation will start after Upgrade Project is over.
2) ECC6 EHP4 - AS ABAP
Now my question is,
when I am doing the Upgrade, I created 4.7 System in SMSY, went ahead for creating STACK XML file in MOPZ, I need to select Tech Usage Types.
I have selected all relevant Usage Types including HCM.
Do I need to select HCM Self Services also here? I cannot select it- it is disabled (makes sense) because it needs Portal, and my System is defined as 4.7 System.
Am I fine to go ahead without selecting HCM Self Services in the 4.7 System to be Upgraded to ECC?

Hi,
SMSY recognizes the 4.7 system as ABAP and hence the Self Services usage is disabled.
You can continue with the upgrade (stack generation) without Self service usage type as it is applicable only to the Portal system.
Later if you need the portal also to be referenced in the Solution Manager - create a system for Portal in SMSY with product version as ERP and then technical usage Self Service should be activated.
Regards,
Srikishan

What are the pre-requisite for JAVA Proxy communication?

What are the pre-requisite for JAVA Proxy communication?

Hi,
You can install the Java proxy runtime on the SAP J2EE Engine Release 6.40 SP5 or higher.
The messaging system that the Java proxy runtime uses to send messages to the Integration Server must also be installed on the J2EE server.
To send messages from a J2EE application, the application must be programmed against beans that encapsulate all details about the Java runtime. The following classes are generated:
· Proxy classes that send or receive messages using the Java proxy runtime.
· Bean classes as an outer shell that conform to the J2EE standard. The beans call the proxy classes for communication.
The classes must be deployed on the J2EE server together with their J2EE application
see this link for the example scenario http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f272165e-0401-0010-b4a1-e7eb8903501d

What are pre-requisite softwares to be installed to start working JAVA?

HI ALL,
Greetings.
Would you pls. let me know what are pre-requisite softwares to be installed to start learning with JAVA? I have completed OCA certification and now i want to start learning JAVA so that i can develop front end database application. I have no other language experience other than PL/SQL.
Pls. let me know what the primary and essential softwares to be installed to start learning java to suit my desired objective as mentioned above.
Thanks in advance.

Follow this trail - http://java.sun.com/docs/books/tutorial/getStarted/ .

Work with result of a select in an external Java Program

Hi!
i would like work with a field of a select in a external java program. I give you an example:
i want copy a table into another table, but i want do a little modification (before insert action) in one parameter via Java class wich parameter is a field in the select.
Example:
i've two tables:
TABLE_BACK (ID, CARACT)
TABLE_NEW (ID, CARACT)
and i've a java Method in an external class com.upc.myClass.modifyCaract(String paramS)
Then, before insert a row in table_new, i want do a transformation in Caract field from table_back. I want do something like this:
INSERT INTO TABLE_NEW (ID, NAME) ( SELECT ID, <%=com.upc.myClass.modifyCaract('I WANT HERE CARACT FIELD FROM TABLE_BACK') FROM TABLE_BACK )
is it possible? how can i do it?
Thanks!!
Message was edited by:
valdomir

Hola Valdomir,
Que tal estas? Ya ha empezado el calor en Barcelona ? jejejejejejej
Well, I think to be possible do what you need.
1) In a procedure step, at source tab query the values, something like:
select caract as MY_CARACT from TABLE_BACK
2) at target tab, use the tags "<@ @>" to import the java class (after put it in the correct ODI directory).
3) at same target tab, after the tag just write (as your example):
INSERT INTO TABLE_NEW (ID, NAME) ( SELECT ID, <@=com.upc.myClass.modifyCaract('I #MY_CARACT) FROM TABLE_BACK )@>
I think this will be enough....
Un saludo,
Cezar Santos

Hey guys, I'm having trouble matching the colour of the image back ground (white) with the pre-set colour selection. is there a tool that can help me? thanks

hey guys, I'm having trouble matching the colour of the image back ground (white) with the pre-set colour selection. is there a tool that can help me? thanks

Your description of the problem is not quite clear so I made certain assumptions. I hope I am rigtht. I believe you have a color patch such as this:
that you would like to place in an image area that has modeling in its white background. You do not want to lay in a flat color but rather to add a color and not lose the modeling or other background tone. The problem is, after making the selection, if you use Edit > Fill and set the Blending mode to Color, the white background remains white. The only colored background area may be an object's shadow or some similar area that is not pure white. (Image 2) It is an unsatisfactory result.
If that is an accurate description of the problem, consider this:
Image 1: The original image
Image 2: Edit > Fill with the Blending mode set to Color. White remains white
Image 3: Mode changed to Lab Color. Edit > Fill with the Blending Mode set to Color. Then return to RGB.
(I would not normally use this green as a replacement color but since it is a Tiffany clock, I chose a light version of Tiffany's trademark color.)

Selecting a row of h:datatable with java

hello
Is there any way to set selected row in java bean for h:datatable ?
in other words.
how can I select a row of h:datatable with java ?
regards

If you have an UICommand component in a row, there are two ways:
Bind h:dataTable to an UIData property in backing bean and use UIData#getRowData().
Or wrap data list in an DataModel instance and use DataModel#getRowData().
Alternatively you could also use f:setPropertyActionListener, but that isn't that efficient inside a h:dataTable.
If you actually want to select rows using radiobuttons or checkboxes, then check the examples in this article: [http://balusc.blogspot.com/2006/06/using-datatables.html].

MOPZ selecting technical usages with JAVA pre-requisite

Similar Messages

Maybe you are looking for