SAINT or SAPEHPI to add additional technical usages?

I'm not sure whether to use SAINT or EHPI to add additional technical usages. I've seen comments recommending both ways but haven't found anything definitive from SAP. Note 1298878 "Installation of SAP Enhancement Package 5 on SAP ERP 6.0" says in section VII/...SAINT Passwords:
"These passwords are only required, if you install additional technical usages with SAINT. This is only possible for systems, which have the technical usage "Central Applications" already installed."
It then lists some components but it isn't really clear that all components should be installed with SAINT. Is there any definitive documentation I'm missing? Thank you,
David

I found it!
On page 30 of the document "How to Install SAP Enhancement Package 5 for SAP ERP 6.0. A Practical Guide" it says
Installation of Additional Technical Usages
ABAP
To install additional technical usages after you have already installed technical usages of enhancement package 5 with SAPehpi, use the following tools:
- If the technical usage Central Applications of enhancement package 5 is already present in your system, use transaction SAINT. Make sure you import the newest SPAM/SAINT update before installing additional technical usages with transaction SAINT. You also have to generate a stack configuration file with the SAP Solution Manager Maintenance Optimizer. If you want to use the parallel import feature of R3trans, follow the instructions of SAP Note 1309506.
- If the technical usage Central Applications is not yet installed in your system, use the SAP Enhancement Package Installer.
Good luck all,
David

Similar Messages

Additional technical usages

When installing an ERP 6.0 EHP4 system, you install an EHP4 Ready System and then install EHP4 with SAPehpi. For this you have to choose all the needed business functions and then map them with note 1165438 to the needed technical usages. So far, so good....
My question:
What's happening, if later (after EHP-installation) new business functions/technical usages for example Human Capital Management or HCM Self Services are required ? Is it possible to add additional technical usages to the system (even if the EHP4-level stays the same) and how will this be done ? I have looked into a lot of documentation of service.sap.com/erp-ehp, but this is not clear for me.

Hi,
After upgrade, if you need to install additional usage type then you can install it with SPAM/SAINT but you need to have stack xml file for this. You can get this information in Technical FAQ guide on http://service.sap.com/erp-ehp.
Thanks
Sunny

Technical Usage for SAP ERP 6.0 EhP4

Hello gurus,
I am planning to upgrde my system EC2 which is an SAP ERP 6.0 on an Oracle10g database with OS Windows Server 2003.
But I dont know which technical usage to choose.
Using the url http://<hostname>:5<instance number>00/utl/UsageTypesInfo, the following are my system's usage types:
SAP ERP 2005/SR2     XSS     XSS     Self Services
SAP ERP 2005/SR2     LSOCP     LSOCP     Learning Solution Content Player
SAP ERP 2005/SR2     BD     BD     Biller Direct
SAP ERP 2005/SR2     XECO     XECO     Extended E-Selling Components
SAP ERP 2005/SR2     ECC     ECC     Central Component
SAP ERP 2005/SR2     BP-ERP     BP ERP     Business Packages (Portal Content)
SAP NetWeaver 2004s/SR2     PI     PI     Process Integration
SAP NetWeaver 2004s/SR2     BI     BI Java     BI Java
SAP NetWeaver 2004s/SR2     AS     AS Java     Application Server Java
SAP NetWeaver 2004s/SR2     EPC     EP Core     Enterprise Portal Core Components
SAP NetWeaver 2004s/SR2     EP     EP     Enterprise Portal
SAP NetWeaver 2004s/SR2     AAS     AS ABAP     Application Server ABAP
There seems to be no direct equivalent of these usage types in the technical usages I see on MOPZ.
Please advise.
Thanks, Cha Cha

Hello,
You may check the attachments in note 1165438 for business function -> technical usage equivalence.
as for usage types, you seem to have listed product instances instead. Perhaps you can also have a look at the product instances -> technical usages equivalences in the attachments to note 1165438
Anyway, the technical usagesI can see right away are:
- SAP Learning Sol-Frontend CP
- XSS Self Services
- SAP FSCM - Biller Direct
- Central applications
- SAP XECO
Netweaver 7 app server ABAP, Netweaver PI, and Enterprise Portal product instances don't have any additional technical usages assigned.
I suggest also the service http://service.sap.com/bfp for a free service that will help you to select technical usages in your EHP4 install.
Best regards,
Miguel Ariñ

Cannot select Technical Usage "Learning Solution - ABAP only" on ECC Server

Dear Gurus,
        My environment are
        a SAP ERP System(ABAP only) in SMSY with
               Product Version = "SAP ERP 6.0"
               Main Instance = "SAP ECC Server" (as Relevant)
                       Note When I select another Relevant for "SAP Learning Sol-Frontend"
                                   Use in logical components; action not possible (see long text)
                                   Message no. SMSY_EDIT_LANDSCAPE413
                                   ... There can only be one relevant ABAP-based main instance. ...
        Select Product Version = "EHP4 FOR SAP ERP 6.0 / NW7.01"
        and Target Stack = "SAP ERP Enhancement Package 4 on NW7.01 - SP Stack 04"
        Existing Technical Usages are
                 - Central Applications
                 - ERecruiting on ECC Server
                 - Financial Supply Chain Mgmt
                 - Human Capital Management
       But I can't add Technical Usage for "Learning Solution - ABAP only" or "HCM - Learning Solution" (The checkbox is in gray color so I can't check it)
       What am I wrong? Please advice.
Best regards,
Choosak

Hi Choosak,
Try this ,
Go to SMSY transaction then select your system .
In right side you will get the screen where all usage types are defined for your system.
Select learning solution and HCM and save it.
Go back to your solution and see whether you can see Learning solution after that.
Thanks,
Gerard

How to Add additional Module to SAP NETWEAVER TRIAL

Hi! Everyone,
I'm completely new to SAP, I was able to install the above subject with its GUI and working perferctly fine, however is it possible to add additional modules such as Logistics, Procurement and sales? Thanks in Advance

Hello Albert,
If it's a trial Netweaver, maybe it's not possible.
Generally you use SPAM or SAINT tcodes to add more packages.
Maybe SAP NetWeaver Administrator will be able to help you.
Jude

"Capture Device Offline" message when attempting to add additional clips from HDV Videocamera,in CS5

"Capture device off line" message when attempting to add additional clips to existing project in Premiere Pro CS5.5.2.
Previous capture was accomplished, but, then when trying to add additional clips from same device it failed.
All 40 minutes of some 185 clips was originally captured using Sony Vegas Moviemaker Platinum 11, with no errors. The additional mt2 clips were then successfully imported into Premiere Pro after indexing and conforming the clips, and they play perfectly well and of a high quality in CS5.5.2 at 1440 x 1080i.
Why would the Capture device be off line , when no physical alteration has been made to the equipment ?

Hi Joe,
Thanks for the advice but, the splitter may not help here, now Sony Vegas Movie Studio Platinum 12 which we also use for less complicated editing is now saying Canon HDV Camcorder is also "OFF LINE"
I think it is a physical connection issue either with the cable , the output from the camera or input into the laptop, because it was working. The issue has been intermittent making it difficilt to diagnose. We use it only for back up as we are overseas and do not have access to our main computer. The tapes are good and the video is high quality so I will have to wait worse luck, and the technical back up for HDV in Belgium is non existent as they have no computers in the stores that have the Firewire or I33394 card.
I have not changed any settings, I may have to wait till I get back to base in 10 days, I am also having an issue with a lens on the Canon 5 D Mark II, which I know must go back to Service but, it still works and, has issues after I dropped it ??????????
Message was edited by: Bob Dix Photographer

MOPZ selecting technical usages with JAVA pre-requisite

Hello all,
Upgrading from 46C to EHP5. Some of the desired technical usage require both ABAP and JAVA system. For example, HCM_Learning Solution has the following pre-requisites
- SAP Learning Sol-Client (Lern, Auth, CP) - all JAVA
- Learning Solution (ABAP)
- SAP Learning Sol-Frontend ABAP
- Portal Content (Java)
So cannot select it in MOPZ since the 46C is not connected to a JAVA instance.
It means the ABAP side reqires two-step upgrade (1) upgrade to EHP5 without the HCM_Learning Solution, then (2) connect to a JAVA instance, select it it in MOPZ, then another ABAP upgrade with HCM_Learning Solution.
Any suggestion how to do the ABAP side in single step - i.e. include the Learning Solution (ABAP and the SAP Learning Sol-Frontend ABAP, then just create the JAVA instance after the ABAP upgrade? Is this a valid scenario?
Regards,
Terry

Hi,
Workaround of this situation is:
Add As Java usage type as well in system definition in SMSY. As a result you will be able to select these usage type as well in MOPZ. But it will give you Java packages as well. You can ignore those packages. And then you can carry out upgrade in a single step.
Thanks
Sunny

EHP4 on ERP 6.0 - Missing technical usages

Hello all,
we have been asked by our functional people to make a copy of our Production HR system and try the EHP4 on this copy from PRD system.
I have made the copy and now I am trying through the maintenance optimizer to select the EHP4.
When I am reaching the option to select the Technical Usages, I cannot see 2 of the 3 required TUs from our functional people.
They would like to have:
Human Capital Management, Travel Management and Cross
ERP SAP
but from these 3 I can find only the Human Capital Management. In particular, under the Human Capital Management tree, there are 2 option "grey" (cannot be selected) HCM-Services & HCM Self Services and one which is "selectable": Human Capital Management.
Could you please give me some info how could I add the missing Technical Usages?
Best Regards,
Loukas

Hi ,
ok this is clear. However there is no HCM-Services in my production instances list in SMSY.
I go then and expand the tree of HCM-Services in MOPZ and I see a small table with the required instances and product versions.
For the HCM-Services I have:
Human Capital Management (the row of the table is white/grey = activated for my system)
SAP XSS (the row is red and no system is assigned)
Portal Content Common (the row is red and no system is assigned)
Portal Content Self Service (the row is red and no system is assigned)
The required Instances are:
SAP ECC Server
SAP XSS (Self Service)
SAP NW - EP Core
SAP NW - EP Core
All of them are selected as relevant in my SMSY but as you can see they are not activated in MOPZ.
It is wise to mention though that we have no Portal system installed in our landscape.So I guess , I am trying to "cheat" the SolMan to allow me to donwload EHP4 for a system which doesn't exist?
Kind Regards,
Loukas
Edited by: Loukas Rougkalas on Jan 3, 2011 11:33 AM

Installing a new technical usage

Hello,
We have already installed EHP4 on our ERP system. Now we would like to install a new Technical usage. Should I do it again using EHPi tool, and go through all the roadmap steps? Or is there any other way to import them?
Thanks,
Ajay

Hi Ajay,
You can do it via SAINT.
Thanks
Sunny

How to add additional fields to zreport which contains standard report code

Hi Experts,
In order to add additional fields to standard report i copied the code into zreport but i am unable to add additonal field into report because the code is looking so complex.
standard report:AQZZ/SAPQUERY/FKF1============
     or
sapmenu->accounting->financial accounting->accounts payable->information system->reports for accounts payable accounting->master data->S_ALR_87012087-Addresslist.
Additional feilds to add is :Region,company code,country
Please let me know how toidentify ALV and guide me how to solve this.
Regards,
naresh.

Hello Naresh,
First check whether these three fields are available in the text elements area.
Please write your code in the subroutine %comp_ldesc.
Repeat the code for your three new fields
perform ldesc(rsaqexce) using 'G00010000X010       00 A1'
    %txt1 %txt2 %txt3 'LFA1-LIFNR' LFA1-LIFNR 'LFA1-LIFNR'.
read table %textpool_langu into %textpool_langu_line
                             with key ID = 'I' key = 'A01'.
if sy-subrc is initial. %txt1 = %textpool_langu_line-entry.
else. %txt1 = %txt_unknown.
endif.
So this subroutine will give you the basic list. Now Program is creating ALV with this basic list. So I think you don't need to worry about that. Please have a thorugh look at the code over this perform, and write accordingly.
I think this is enoogh.
Please update if you got the solution, which will be informative for others.
regards,
Antony Thomas
Edited by: Antony Thomas on Jul 27, 2010 7:57 AM

How To Add Additional Fields When Creating New Contact From w/in Mac Mail?

Hi there. When in Mac Mail and clicking on contact information provided within an email, we are able to either (1) CREATE NEW CONTACT or (2) ADD TO EXISTING CONTACT (by clicking on the arrow next to a phone number, address, etc.). If I choose "Create New Contact," how can I add additional fields BEFORE clicking on "Add to Address Book" button in lower right corner? Let's say, for example, I know this new contacts URL or company. (Currently, I am creating the new contact from within Mac Mail and then going to Address Book and finding the contact, then editing, the adding the additional fields, then saving, and then going back to Mac Mail. This all takes time.)
Note: When creating a new iCal event from within Mac Mail, we can click on Option/Alt key when selecting drop-down arrow...and this will allow us to add additional information. The same feature isn't available for address book???

I have the exact same question and problem. If there was a way to automatically open the AB entry after "creating new contact" this would solve it.
Thanks for any suggestion

When i open safari on my Imac if i also open an additional window, when i then close them down and reopen safari they both paper again.also if i then add additional windows the additional windows keep coming up too

when i open safari on my Imac if i also open an additional window, when i then close them down and reopen safari they both paper again.also if i then add additional windows the additional windows keep coming up too

If you are running v10.7 Lion, disable Resume > How To Disable Lion's 'Resume' Feature - MacRumors.com

How to add additional field to the existing report

hi,
report name is RHXPE_EXPIRED_QUALI
if u execute report alv list is genereted with like this.
object type, id of related object, object name, object type, id of related object,last name, first name like this
where can i get these field descriptios in the prigram becoz many perform ststements r there. i want to add additional field text.
program is:
CORRECTIONS
DATE       CORRECTION NOTE    AUTHOR DESCRIPTION
09.03.2001            0388404 XSC    Wrong list output for multiple Os
05.06.2001 AL0K023393 0410219 Lud    Wrong keydate for search with
                                     Pchbegda and pchendda.
30.01.2002 S6BK000033 0491055 TS     Report: RHXPE_EXPIRED_QUALI
                                     doesn't provide a spool list.
REPORT rhpk_find_pers_with_expired_qu MESSAGE-ID pq.
TABLES : pchdy.
INCLUDES
INCLUDE rhxmacro.
INCLUDE rhpeini0.
TABLES
DATA: objects LIKE hrsobid    OCCURS 1 WITH HEADER LINE.
VARIABLES
DATA: subrc LIKE sy-subrc.
DATA: orgeh_text LIKE t777o-otext.
SELECTION SCREEN
objid
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
PARAMETERS:
   pchplvar LIKE p1000-plvar NO-DISPLAY,    "plan version
   pchotype LIKE pchdy-otype NO-DISPLAY. "objecttype
Objid
rhx-f4-objid-data.
SELECT-OPTIONS: pchobjid FOR pchdy-objid_str NO INTERVALS.
Search
PARAMETERS:
pchseark LIKE pchdy-seark.           "matchcode object plom.
SELECTION-SCREEN END OF BLOCK b1.
Objecttime
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-001.
PARAMETERS: se_begd LIKE p1000-begda DEFAULT sy-datum, "'19000101',
            se_endd LIKE p1000-endda DEFAULT high_date.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-005.
PARAMETERS:
   h_events LIKE dynp_rhpp-gen_train, "with training sugg
   h_qual LIKE dynp_rhpp-expired_qual. "with Qual
SELECTION-SCREEN END OF BLOCK b3.
AT SELECTION-SCREEN ON pchobjid.
PERFORM check_objid_sign(rhxchk00) USING pchobjid-sign.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR pchobjid-low.
rhx-f4-objid-low pchplvar pchotype pchobjid '' ''.
AT SELECTION-SCREEN.
PERFORM check_plvar(rhxchk00) USING pchplvar.
PERFORM check_seark(rhxchk00) TABLES pchobjid
                                USING pchseark pchplvar pchotype.
INITIALIZATION
INITIALIZATION.
PERFORM read_t77s0_parameters_for_pe.
get user parameters/Planvariante und Beginndatum setzen:
pchotype = $orgeh.
CALL FUNCTION 'RHP0_USER_PARAMETERS_GET'
       EXPORTING
            fill_if_initial = 'X'
       IMPORTING
            plvar           = pchplvar
            begda           = se_begd
            endda           = se_endd
          with_key        =
          SUBSTITUTE      =
          ESSENTIAL       = only_essential
            org_unit        = pchobjid-low
      EXCEPTIONS
            OTHERS     = 0.
SE_BEGD = LOW_DATE.   "Correction AL0K023393 0410219
IF NOT pchobjid-low IS INITIAL.
    pchobjid-sign   = 'I'.
    pchobjid-option = 'EQ'.
    APPEND pchobjid.
ENDIF.
START-OF-SELECTION
START-OF-SELECTION.
correction 0491055
correction was done for getting a spool list in background-processing.
CASE sy-batch.
    WHEN space.
      SUBMIT rhpe_expired_quali
           WITH pchplvar = pchplvar
           WITH pchotype = pchotype
           WITH pchobjid IN pchobjid
           WITH pchbegda = se_begd
           WITH pchendda = se_endd
           WITH h_qual = h_qual
           WITH h_events = h_events
                  AND RETURN.
    WHEN 'X'.
      SUBMIT rhpe_expired_quali
           WITH pchplvar = pchplvar
           WITH pchotype = pchotype
           WITH pchobjid IN pchobjid
           WITH pchbegda = se_begd
           WITH pchendda = se_endd
           WITH h_qual = h_qual
           WITH h_events = h_events
                  TO SAP-SPOOL.
ENDCASE.
END-OF-SELECTION
END-OF-SELECTION.

Hi,
I think you need to show more programs.
you said, the report program is 'RHXPE_EXPIRED_QUALI', but you upload 'rhpk_find_pers_with_expired_qu' program.
usually, ALV field is modifyed in 'PERFORM fieldcatalog_modify', if you use Functional ALV.
Try to search 'fieldcatalog function', you will find easy.
Regard,
SY Kim

How to add additional lines to the Order Form template?

I purchased and installed Acrobat Pro 9 because of its ability to create forms and found the Order Form template is just perfect for what I need, why reinvent the wheel, right? Except I found I can't figure out how to add additional object that duplicate what is already there. I highlighted an entire row and tried to just copy and paste but the past function put the copied objects at the bottom of the form in what looks like a group, all out of order. I tried looking in the online help for a possible key combination that would inset an additional row of objects but couldn't find any.
Also the form doesn't move down and create a new page keeping all the other elements in line, it moves to the bottom of the current page and stops. Thought the template was based on a table so I was going to insert additional rows thinking once it reached the bottom of the current page it would automatically break to a new page and continue, but it's not a table. So my question is, how can I add duplicate object that match the Order Form templates Item, Description, etc. objects? I've come to realize learning to use this product is not going to be as simple a proposition as I was lead to believe. O well, live and learn!
If someone can point me in the right direction, any help is greatly appreciated.
Tony Rodriguez

Thanks, Barney! It's even easier than the solution I came to: copying and pasting into the field.

Can i use an external hard drive in windows to add additional storage after my initial partition is set up. i want to add a 500 GB hard drive to use with my windows. I set windows up in boot camp with a 50 GB partition?

can i use an external hard drive in windows to add additional storage after my initial partition is set up. i want to add a 500 GB external hard drive to use with my windows. I set windows up in boot camp with a 50 GB partition? I now want to add another 500 GB?

Yes. Windows supports external USB drives.

SAINT or SAPEHPI to add additional technical usages?

Similar Messages

Maybe you are looking for