More filtering weirdness

Hi all: I am still seeing an issue on our BM3.9sp2 box running on NW6.5sp8 and eDir 8.8.5.
I have two credit card machines, one in subnet 10.1.x.x and one in subnet 10.2.x.x which is across a wan. Here are the filters I setup:
10.1.x.x subnet
outbound
traffic: all_tcp
source: private - host: 10.1.1.98
Dest: public - any address
inbound
traffic: all_tcp
source: public - any address
Dest: private - host: 10.1.1.98
10.2.x.x subnet
outbound
traffic: all_tcp
source: private - host: 10.2.1.98
Dest: public - any address
inbound
traffic: all_tcp
source: public - any address
Dest: private - host: 10.2.1.98
The credit card machine in the 10.2.x.x subnet works fine while the machine in 10.1.x.x does not.
So I tried the old turn of ipflt and see if things work trick. Instantly both machines worked fine. So I turned ipflt back on and again only the one machine worked. For kicks I again turned of ipflt and guess what, only the one machine worked (10.2.x.x). The machine at 10.1.1.98 would not connect even with ipflt unloaded. I repeatedly retested and even with ipflt off the machine on 10.1.x.x would not connect.
Weird. Any thoughts? Thanks, Chris.

On 19/04/11 16:43, Chris wrote:
> Hi all: I am still seeing an issue on our BM3.9sp2 box running on
> NW6.5sp8 and eDir 8.8.5.
> I have two credit card machines, one in subnet 10.1.x.x and one in
> subnet 10.2.x.x which is across a wan. Here are the filters I setup:
> _10.1.x.x subnet_
> outbound
> traffic: all_tcp
> source: private - host: 10.1.1.98
> Dest: public - any address
> inbound
> traffic: all_tcp
> source: public - any address
> Dest: private - host: 10.1.1.98
> _10.2.x.x subnet_
> outbound
> traffic: all_tcp
> source: private - host: 10.2.1.98
> Dest: public - any address
> inbound
> traffic: all_tcp
> source: public - any address
> Dest: private - host: 10.2.1.98
> The credit card machine in the 10.2.x.x subnet works fine while the
> machine in 10.1.x.x does not.
> So I tried the old turn of ipflt and see if things work trick. Instantly
> both machines worked fine. So I turned ipflt back on and again only the
> one machine worked. For kicks I again turned of ipflt and guess what,
> only the one machine worked (10.2.x.x). The machine at 10.1.1.98 would
> not connect even with ipflt unloaded. I repeatedly retested and even
> with ipflt off the machine on 10.1.x.x would not connect.
> Weird. Any thoughts? Thanks, Chris.
1. If traffic is always started in one direction, then you only need one
filter and make it stateful.
2. Are you using imanager or filtcfg to create the filters? did you
check in filtcfg/configure interface options that the nics are correctly
defined s public and private?
3. If you unload ipflt and still fails, load pktscan.nlm on the server
and take a lan trace to see where the traffic fails.

Similar Messages

I am using Aperture 3 now and I love it. But I would like to purchase or download perhaps some freeware, easy to use photo imaging/editing software with more filters, perhaps layering etc. My Apple mentor suggests Pixelmator or Gimp ?

I am using Aperture 3 now and I love it. But I would like to purchase or download perhaps some freeware, easy to use photo imaging/editing software with more filters, perhaps layering etc. I don't want something with a very steep learning curve, getting to old for that. My Apple mentor suggests Pixelmator or Gimp ? Are there some others out there? When I was still in the Windows world, I used Photoshop Elements but that is now in my past. Any ideas?

Pixelmator or Gimp are both nice tools for advanced image processing and compositing. I.e. Gimp can do pretty much the same as Phtoshop. You might also have a look at digikam http://www.digikam.org/drupal/download/binary
Digikam is not just an advanced image processing and compositing program, it is also content management system like Aperture or iPhoto.
I also find GraphicConverter a nice tool, but it is not free.
If you want your image editing tools to integrate well with Aperture, I would look first at the available plug-ins, start with the plug-ins offered in the Aperture pull-down menu
Aperture -> Aperture Plug-ins...

More Sound Weirdness

I managed to connect external speakers to my MacPro (via the audio jack on the back of the machine) and finally figured out how to get them to work. And they work just fine except for this one problem.
Whenever I go to print a file, no matter what program I am printing from, I get a loud ping alert from the external speakers. It's not the sound I have selected for alerts. It's a different one. And it's obnoxiously loud. It happens for a few other computer functions as well. I'd like to turn it off - or at least dampen the volume - but I have tried every sound tweak I could find and nothing works.
Does anyone have any suggestions?

Nevermind.....
I went back and noodled around some more. Turns out the problem occurrs only in Microsoft Office applications and after fussing with the Help menu for a bit I finally figured out how to turn off the sound. (But, oddly, no way to keep the sound but lower the volume.)
Just in case someone else should have this problem: In Word go to Preferences (Note: a Word file must be open in order for you to do this). Then to General. Then clear the "Provide feedback with sound" checkbox.
Adios.

More multicam weirdness - CC

Okay... I have an unusual multicam with an even more unusual problem.
We are making short videos for a Spanish class. These are mostly three cameras with additional, non-sync audio for each of the main actors. Each video is shot in short takes with a little overlap that need to be put together in a multicam sequence.
I used the new audio sync feature to (successfully!) sync up about 70 files. They auto sorted into a dozen different multiclips and, for the most part, Premiere was close to perfect! This is wonderful since my Spanish is "no muy buena"!
I opened each of the multiclips in the timeline. It is important that I include the audio from each of the actors so I turned all of the relevant audio tracks on. I selected the best take from each multiclip and pasted these into a new sequence with the intent of making that into a multicam sequence the old fashioned way. I suspect this is my problem.
When I drag this new nest to the new item icon I get a single video and audio track and all of the audio tracks play at once (all very good). BUT when I enable the Multi-Camera most of the audio tracks (all of the useful ones) go away even though they were happily playing muxed in the nest before I enabled Multi-Camera!
Any ideas on why this is happening or how I could proceed differently? I'd really like to use the multi-camera feature but it will be difficult to edit each little piece and then bring it into a finished sequence.
Here are some screen grabs to help:
My original, hand-made, nest called "ALL_techshop"
The new item created when "ALL_techshop" is dragged onto the new item icon. All of the audio channels that I have turned on paly simultaneously
Enabling the Multi-Camera turns off all of the useful channels:

There may be a new cool simple way or button to take care of this, but if I understand your post correctly...did you try option+selecting just the video tracks only and then right-clicking and selecting "nest" then right-click again and select multi-camera>enable. That is how I used to do it on CS6 and it worked recently on CC. That way your video is nested all on one track but your audio remains untouched. I don't know why when you did it some of the tracks turned off. Might be something simple that's not being toggled on or off, not sure. But you can try what I suggested for now and see if it helps.
HOWEVER...please be aware before you start your multicam edit that there is a huge, giant, ugly, ridiculously unacceptable bug with multicam in Premiere Pro CC right now that has essentially broken the multicam experience. If you don't know about it, read about it below or you may be left losing hours of editing work:
http://forums.adobe.com/thread/1236698?tstart=0
Good luck!

More filtering problems

Greetings,
Yesterday, I posted a problem with finding an invisible filter. Many thanks to those who helped.
Today, I have another filter problem. While searching, I noticed the same problem I had with an invisible filter, but this time when I implement the fix (i.e., open a filter HUD for a smart album, then click on the Photos item in the library) there is not an invisible filter, but rather the filter HUD contains the following line: "Source: Library Library."
The searching appears to be normal when one of the "Library" fields is selected, but it may or may not be normal when the other "Library" is selected. The odd thing is that, when I search my hard drive, there is only one Aperture Library.
One of the strengths of Aperture is the library functions, but I'm rapidly losing my trust in search results.
Anyone know how to control the Library field?
Many thanks,
Rick

The "Source: Library Library" line is the same as you show, but I also get the double library when filtering rules are being used.
I tried opening the HUD of different smart albums to see if that made a difference. If the smart album filter HUD that I open is one of the "Library Albums," that Filter HUD displays "Source: Library," and when I click on the Photos item, that Filter HUD displays "Source: Library Library." If the smart album filter HUD that I open is for one of my projects, that Filter HUD displays "Source: Library {Project name}," and when I click on the Photos item, that Filter HUD displays "Source: Library Library."
I'm having trouble re-creating the problem that initiated this query, but I'm still not getting expected results with searching. If I open a filter HUD for a smart album, then click on the Photos item in the library, there are no invisible filters being applied. The only filter checked is Rating, and when the rating is greater than or equal to "unrated," all of the photos are present. So far, so good.
However, if I go through the process of checking for an invisible filter (i.e., open a filter HUD for a smart album, then click on the Photos item in the library), and then add a text filter criteria to the open HUD, say the street name, "Celetná," Aperture correctly finds 32 items. If I go through the process of checking for an invisible filter, close the open HUD, and then enter Celetná in the search box in the upper right corner of the brower, Aperture only finds 9 items. Similarly, if I go through the process of checking for an invisible filter, close the open HUD, and then re-open the HUD by clicking on the icon in the upper right corner of the brower and entering Celetná into the text filter, Aperture finds 9 items.
I hope this is clear. Any ideas?

More reel weirdness

Hi Everyone -
So I have a few projects that I built on one machine and now I need to move to a new machine. Folder structure is exactly the same as it was on the original box - and preferences in terms of frame rate (everywhere you can enter frame rate) are exactly the same.
So when I open the .ircp on the new machine predicably all of my reels are offline - however when I try load from desktop I get the warning message that the frame rate of some of the reels doesn't match the current frame rate...blah blah blah.
What's even weirder is if I had the clips to a blank timeline they go in just find but if I try to rebuild or reload the reels from media thats online I get the same message.
This is extremly frustrating because I can't seem to move projects around from machine to machine. I've verified that all media is 23.976 and that all of my projects are also 23.976.
HELP!!!!

Safari preferences and Click To Flash have nothing to do with it, so deleting or removing those won't solve the problem. If I were you, I'd download the 10.6.2 Update and reinstall that, then Repair Disk Permissions and then restart Safari to see if the problem continues.

More iPod Weirdness......

Hi,
I posted the other day concerning problems of waking the iPod. I usually have to force sleep and then wake before a selected song will play.
I did a restore and it was no avail, the problem still occurs but I have encountered further "symptoms" or clues. First it seems to only do this when using in my car with a cassette adaptor. Could this mess with it's head? I also noticed that the plug of the cassette adaptor is a a bit looser and sometimes works it's self loose resulting in lost fidelity of sound.
Part 2 Weirdness
When I plug it into my Powerbook it used to go straight to "do not unplug" with slashed circle icon. Now it does that initially but will revert to just the large "charge" battery icon. When I "wake" it, it goes to the menu as if not plugged in. It will then go back to the charge battery then go to sleep/dark screen. iTunes recognizes and I can make changes via iTunes. Not too odd but it didn't do this till the restore.......
Weird little gadget....
Warren
PS ALL software is current and no issues elsewhere.

Safari preferences and Click To Flash have nothing to do with it, so deleting or removing those won't solve the problem. If I were you, I'd download the 10.6.2 Update and reinstall that, then Repair Disk Permissions and then restart Safari to see if the problem continues.

More Safari weirdness

In addition to the bug I've chimed in on elsewhere in this forum (Bookmarks Bar doesn't appear when opening new windows), now the Tab Bar is displaying weirdness, as shown in the screenshot below.
http://farm3.static.flickr.com/2560/4196977351e5bc90d927b.jpg
Resetting Safari, trashing prefs and ClickToFlash (the only enhancement I've added) has no effect
Message was edited by: Dino Ilarde

Safari preferences and Click To Flash have nothing to do with it, so deleting or removing those won't solve the problem. If I were you, I'd download the 10.6.2 Update and reinstall that, then Repair Disk Permissions and then restart Safari to see if the problem continues.

Where can I get more filters, transitions and special effects for FC?

I thought I heard that there is a third party company that has transitions and cool effects and filters I could use with final cut express. Does anyone know who they are, and if they are creditable?
THANKS!

Oh no I don't have a problem with free and I don't think expensive things means it's better. It's just easier to install a couple discs of software then to go through a bunch of sites and sift through all the free ones. I used to use iMovie and GeeThree made it easy with all their discs. That's why I am looking for software. Plus if anything ever happens to my computer it wouldn't take any time at all to reinstall the CD then to go through and find everything again. Thank you again for your suggestions.

More Keychain weirdness

I verified Keychain but the report came back "unverified" because of problems. I repaired as suggested and all items disappeared. Restarted and everything reappeared. Again, verified and problems reappeared.
Suggestions????

One (somewhat drastic) solution which should fix most problems is to delete the login item in your keychain altogether. Then quit keychain access and log out/in. all your saved passwords will be gone so you'll have to start saving them in the keychain again.

More screen weirdness...

i just got my display replaced (3rd one in a 2 month old laptop).
Here's what it looks like:
http://web.mac.com/joshstevens79/TheChronicles_of_Joshua/Blankfiles/DSC00027a.jpg
is it me, or is it uneven?

It's uneven. Trust your eyes, it'll be you who'll be looking at the screen. I'm in the same position and while I think the displays are good I can't live with the uneveness. Seems I'm sensitive to this, as others who I show my screen to don't really see a problem and if they do (when pointed out) can live with it. Not good enough in my eyes if you've just spent $2000.
My MacPros so far:-
9C67 (LG) Matte: Uneven and small yellow tint to bottom of screen.
9C68 (Samsung) Glossy: Yellow tint to bottom 1/3 but not uneven.
Jon.

More text weirdness

I'm using Motion 3 for the first time (been using 2 fairly successfully) and have found the Text tool much harder to manipulate. For instance, I can't do all caps for a word and have the first letter a different font size than the rest of the word by highlighting it and changing the font size. Am I missing something here?

No, in fact, I just tried it and it used to force me to highlight the text on the canvas (as opposed to just in the inspector) in order to do what you are suggesting.
I am now able to select a single character (either on the canvas or in the inspector) and alter its size independent of the other characters on the line.
(and you do know about the allcaps checkbox in the inspector, right?)
Patrick

Hello , need more core image filters

Hey folks first post here, but would like to say thanks to all for the great info -you folks put this noob at ease . I need an app or plug in that can do lightning fx, im using gimpshop and am told that photoshop plugs work with gimpshop ? Well i have to say gimpshop is great and free wich blows me away ,now i know i need to up my ram all the way but it seems to be the only image editor that does not over tax the ram !!! I have 1GB ram and have used live quarts -image trix and even the core image funhouse thats bundled in the developers tools -and they all seem to eat ram fast .A layer or two and filter next thing i know it slows down or wont respond , and i look in the console logs i keep geting these wormy v-ram message any idea what the **** that is ?
core duo 17'' in Mac OS X (10.4.7) 1 GB ram

This is incorrect. There are in fact more filters in FCE4 than in earlier versions. I notice that you have a G4. If this is the computer you're using many of the newer filter will not work with that machine unless you have an upgraded graphics card, though I'm not sure you can get one that will do it for that. That might be one reason you appear to see fewer filters, but all the old filters should be there are well, except for a one or maybe two that were removed because they never worked properly.

The filtering , sorting , totaling action on ALV report is lost

Hi ,
I have an Interactive ALV report which i sort it , filter it and total it before I enter into my Z customised screen, from my Z cusomised screen when I come back to the ALV report, the report is no more sorted, no more filtered and no more totaled.
Please help me on this its a bit urgent.

*& Report ZALV_SUM
REPORT ZNNR_ALV_SUM.
TABLES:     ekko.
type-pools: slis.                                 "ALV Declarations
*Data Declaration
TYPES: BEGIN OF t_vbap,
vbeln TYPE vbap-vbeln,
matnr TYPE vbap-matnr,
netwr TYPE vbap-netwr,
waerk TYPE vbap-waerk,
END OF t_vbap.
DATA: it_vbap TYPE STANDARD TABLE OF t_vbap INITIAL SIZE 0,
      wa_vbap TYPE t_vbap.
*ALV data declarations
data: fieldcatalog type slis_t_fieldcat_alv with header line,
      gd_tab_group type slis_t_sp_group_alv,
      gd_layout    type slis_layout_alv,
      gd_repid     like sy-repid.
*Start-of-selection.
START-OF-SELECTION.
perform data_retrieval.
perform build_fieldcatalog.
perform build_layout.
perform display_alv_report.
*&      Form BUILD_FIELDCATALOG
      Build Fieldcatalog for ALV Report
form build_fieldcatalog.
fieldcatalog-fieldname   = 'VBELN'.
fieldcatalog-seltext_m   = 'Sales Order'.
fieldcatalog-col_pos     = 0.
fieldcatalog-outputlen   = 10.
fieldcatalog-emphasize   = 'X'.
fieldcatalog-key         = 'X'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'MATNR'.
fieldcatalog-seltext_m   = 'Material Number'.
fieldcatalog-col_pos     = 4.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'NETWR'.
fieldcatalog-seltext_m   = 'Net Price'.
fieldcatalog-col_pos     = 7.
fieldcatalog-outputlen   = 15.
fieldcatalog-do_sum      = 'X'.        "Display column total
fieldcatalog-cfieldname     = 'WAERK'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'WAERK'.
fieldcatalog-seltext_m   = 'Price Curr'.
fieldcatalog-col_pos     = 8.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
endform.                    " BUILD_FIELDCATALOG
*&      Form BUILD_LAYOUT
      Build layout for ALV grid report
form build_layout.
gd_layout-no_input          = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text       = 'Totals'(201).
gd_layout-totals_only        = 'X'.
gd_layout-f2code            = 'DISP'. "Sets fcode for when double
                                        "click(press f2)
gd_layout-zebra             = 'X'.
gd_layout-group_change_edit = 'X'.
gd_layout-header_text       = 'helllllo'.
endform.                    " BUILD_LAYOUT
*&      Form DISPLAY_ALV_REPORT
      Display report using ALV grid
form display_alv_report.
gd_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
            i_callback_program      = gd_repid
           i_callback_top_of_page   = 'TOP-OF-PAGE' "see FORM
           i_callback_user_command = 'USER_COMMAND'
           i_grid_title           = outtext
            is_layout               = gd_layout
            it_fieldcat             = fieldcatalog[]
           it_special_groups       = gd_tabgroup
           IT_EVENTS                = GT_XEVENTS
            i_save                  = 'X'
           is_variant              = z_template
       tables
            t_outtab                = it_vbap
       exceptions
            program_error           = 1
            others                  = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform.                    " DISPLAY_ALV_REPORT
*&      Form DATA_RETRIEVAL
      Retrieve data form EKPO table and populate itab it_ekko
form data_retrieval.
select vbeln matnr netwr waerk
up to 50 rows
from vbap
into table it_vbap.
endform.                    " DATA_RETRIEVAL

Download link of IR, conditional field output means filters are ignored

Hi All,
I need to have a report on screen where the user applies filters, then when they've finished, they extract a subset of the on-screen fields to csv.
The current application uses some on-screen selection lists/text items, a classic report underneath that, then an extract button to run another screen (passing in the filter values) which runs the query again to extract to the external csv file based on the filter values.
I really want to change this to an interactive report, so the users can filter on anything they want to (and not have to request more filters to be added to the screen as we change the schema), then either hit an extract button or better: use the Download capability of the IR.
I have tried:
1. IR with a hidden field to collect an ID, create a collection then loop through the collection contents in a separate screen to output to csv.
problem: the rows have to be on-screen for the hidden item to have a value, so unless the users are showing All rows, I don't get the full data set in the collection (apex_application.g_f01.COUNT just equals the rows on screen)
2. IR, then use the built-in Download capabilities to output to csv.
problem: I don't want all fields downloaded. I may have 20 fields on screen, the user has applied filters to many of them, but the csv needs 3 fields. I can make the output of every field I don't want outputted, conditional on :REQUEST != CSV and leave the others I do want downloaded, unconditional, but then the filters aren't respected (I assume because the field is not available to Apex due to the condition) and I get more rows than I was expecting.
Is there a way of achieving this by using an IR? Is JavaScript the only way by accessing the current filtered query of an IR?
regards,
Malcolm.

Using APEX_APPLICATION_PAGE_IR, APEX_APPLICATION_PAGE_IR_RPT, APEX_APPLICATION_PAGE_IR_COND is the answer.

More filtering weirdness

Similar Messages

Maybe you are looking for