More problems with my audigy se c

Idid a dxiag and it told me my card does not support hardware buffering this is strange becuse the feature that i think this card has it should be able to support that ?anyone can help me with this?

Have you checked the settings you have for HW acceleration/SRC? IIRC, XP uses level 3 (standard) as default for HW acceleration.
start run... sndvol32 -> audio -->advanced button? --> performance tab?
Changing Hardware Acceleration Settings for Digital AudioWindows XP Professional includes a driver that provides hardware acceleration. This driver speeds up the deli'very of digital audio data, which improves Microsoft DirectSound Audio performance. You can change the level of hardware acceleration available to DirectSound Audio applications by using the Hardware Acceleration option for Sounds and Audio Devices. You can use these settings for testing or to improve the stability of the system.
Hardware Acceleration for DirectSound Audio has four settings, which are described in Table 9-3.
Table 9-3 Hardware Acceleration for DirectSound Audio
Emulation
Forces emulation mode so that audio applications run as though no DirectSound Audio?compatible driver is on the system and no hardware acceleration is provided. Use this setting only if other acceleration settings do not function properly.
Basic
Disables hardware acceleration so that applications run as though no hardware acceleration is present. This option is useful if you want to emulate a non-DirectSound-accelerated sound card for testing purposes.
Standard
Enables hardware acceleration, but disables any vendor-specific properties so that only standard acceleration features are used. This is the default setting for Windows XP Professional.
Full
Enables hardware acceleration and all vendor-specific properties so that all acceleration features are available.
To change the hardware acceleration setting for audio devices
. In Control Panel, open Sounds, Speech and Audio Devices, and then open Sounds and Audio Devices.
2. Click the Audio tab, and under Sound Playback, click the Advanced button.
3. In the Advanced Audio Properties dialog box, click the Performance tab.
4. Under Audio Playback, move the Hardware Acceleration slider to the desired setting.
jutapa

Similar Messages

Sound problem with the Audigy 2 va

Hi, I have asound problem with the Audigy 2 value. most of applictaions I played got sound. however, when I play FS2004, the sounds come on only the ATC voice in game playing, 5sec after the voice over, the sound is gone, and only when another voice is playing, the sound comes out. please helps out.

Shedden,
I would suggest going ahead with a cleansweep and reinstall of the card. Here are instructions on how to cleansweep and reinstall your sound card:
http://us.creative.com/support/kb/ar...asp?l=2&sid=72
Jeremy

Weird problem With my Audigy 4

Hi all, I have a weird problem with my audigy 4. When I install the Nvidia IDE and Sata driver for my motherboard, I get sound problem in BF2, It glitches, I don't here my gun, well it's all ****ed up. Does anyone know why?Thanks in advance.

I have had every iphone model ever made. I have never had a problem like this before. It appears that there are small spots all over the screen. Not to be confused with the "yellow spots" other iphone 4 user have been reporting due to the glue not drying before they reached the customer. This is a different type of spot. I would compare it to a petrie dish that scientist test for things in.
The only thing I can think of is something is happening with the coating over the glass (oleophobic coating maybe braking down?). It only happened on the front screen and not the back glass. You can get the spots to go away when you use a micro fiber cloth to remove the natural oil from your face against the phone. The minute you start using the phone again, they appear. They are kinda annoying and make your phone screen look dirty and have a weird glare in it when your in the sun.
I made an appointment tomorrow to go to the apple store to see what they can tell me. Hope fully its nothing major. The worst thing that could happen is the phone gets replaces by another. Ill keep everyone update.

Problem with microphone, Audigy 2, and a Dell (not the same problem as the 8 million other topi

Hello,?I recently reformatted my hard dri've and had to reinstall drivers for nearly everything, etc. I have a Dell Dimension 4600, and an Audigy 2 sound card. My microphone worked fine before the reformat and then it was broken. Its not that it wasn't picking up my voice (I have read that the typical problem with Dell computers and microphones was that you had to almost scream into the microphone to get it to hear anything). When I tried to record something, it would record what was coming out of my speakers, and not what I was saying (no matter how hard I yelled). So, when I was playing Counterstrike, everybody heard my gun shooting and grenades exploding etc. instead of my voice (which was what was coming out of my headphones). So I downloaded the ISO available here and through some complicated, random process of uninstalling and reinstalling the various sound drivers I found on the internet, I managed to get my microphone to work perfectly. I changed some settings before I went to bed on Sunday night, and when I tried to use my microphone on Monday it didn't work again (and I had the same problem as before).
So I reformatted again and am trying to figure out what order I installed and uninstalled etc.
So my question is, has anyone else has this specific problem (when attempting to record it records what comes out of the speakers/headphones and not what is being said into the microphone) and remembers how to fix it's? What I did was really bizarre, something like downloading Dell drivers, installing them, uninstalling them, downloading Creative drivers, installing them, installing Dell drivers on top of them, uninstalling both, downloading the ISO, reinstall the Creative drivers, install the files from the ISO, or something like that. Obviously that includes a lot more steps than are needed and because part 3 of the ISO is currently down (I don't have a CD burner so had to redownload the whole thing (I just used a CD emulator last time)) I can't work on it right now :/

HalberdBlue wrote:
Hello,I recently reformatted my hard dri've and had to reinstall drivers for nearly everything, etc. I have a Dell Dimension 4600, and an Audigy 2 sound card. My microphone worked fine before the reformat and then it was broken. Its not that it wasn't picking up my voice (I have read that the typical problem with Dell computers and microphones was that you had to almost scream into the microphone to get it to hear anything). When I tried to record something, it would record what was coming out of my speakers, and not what I was saying (no matter how hard I yelled). So, when I was playing Counterstrike, everybody heard my gun shooting and grenades exploding etc. instead of my voice (which was what was coming out of my headphones).So I downloaded the ISO available here and through some complicated, random process of uninstalling and reinstalling the various sound drivers I found on the internet, I managed to get my microphone to work perfectly. I changed some settings before I went to bed on Sunday night, and when I tried to use my microphone on Monday it didn't work again (and I had the same problem as before). So I reformatted again and am trying to figure out what order I installed and uninstalled etc.So my question is, has anyone else has this specific problem (when attempting to record it records what comes out of the speakers/headphones and not what is being said into the microphone) and remembers how to fix it's What I did was really bizarre, something like downloading Dell drivers, installing them, uninstalling them, downloading Creative drivers, installing them, installing Dell drivers on top of them, uninstalling both, downloading the ISO, reinstall the Creative drivers, install the files from the ISO, or something like that. Obviously that includes a lot more steps than are needed and because part 3 of the ISO is currently down (I don't have a CD burner so had to redownload the whole thing (I just used a CD emulator last time)) I can't work on it right now :/
Actually, it's not a problem but a setting. On surround mixer .rec source setting --> when you set it to What U Hear everything you hear becomes recorded --> for microphone recording set it to microphone (also set "monitoring while recording" on/off).
jutapa

More Problems with iTunes 7,0

I, like many other people it seems, have been having problems with my iTunes ever since I downloaded the latest upgrade for it.
I downloaded iTunes 7.0 on September 16th late at night. After downloading the upgrade I turned my laptop off and thought nothing of it. As I shut down my laptop however, I noticed that I recieved an error message. Ignoring it for the moment, I let my laptop shut off.
When I turned my laptop on the next morning, I noticed that nothing was working. I recieved 3 more error messages, my iTunes would not open at all, my music would [obviously] not play, and for some reason it ended up turning the "Mute" function on on my laptop sound system. After turning that off iTunes still wouldn't open.
Now, following the advice of someone in this forum, I attempted to downgrade my version of iTunes back to 6.0 [or around there] Now at least my iTunes will open, but nothing will play. When I attempt to play a song the information will show up, but it simply will not play.
I'm beginning to get really frustrated with this entire situation. A simple upgrade to my iTunes should not compromise my ability to listen to my music, and even the ability of my laptop to function properly.
Any help or advice that could be given would be greatly appreciated.
Dell Inspiron 6400 Windows XP
Dell Inspiron 6400 Windows XP
Dell Inspiron 6400 Windows XP

i downloaded the update and now my itunes wont even open.
a few questions before proceeding.
are you getting an error message? if so, what does it say? include error message numbers if you're getting any.
or are you getting no error messages whatsoever when you try to launch itunes?
if you're getting no error messages whatsoever, do you just see the wee hourglass for a few seconds, and then nothing? if so, do you also have Norton Internet Security 2005 installed on that PC?
or are you seeing a brief "flash" of the itunes license screen (and then nothing)? if so, do you also see similar behavior when you try to launch your QuickTime?

Problems with new Audigy driv

<p class="MsoNormal">I have just installed a Sound Blaster Audigy Platinum Model SB0090 to replace my old SB Li've. When upgrading from older Audigy drivers to the latest drivers available on the Creative support website, I find that they cause serious problems with my 4. digital speaker system (Boston BA7500G). With either of the newest drivers installed, when I adjust the volume using either the Creative Surround Mixer or the Creative Remote Control, it causes the rear speakers to stop working. Closer investigation revealed that moving the volume slider in Creative Surround Mixer had a strange effect in Windows Audio Control Panel. Upon opening the Speaker Volume tab in Windows Audio Control Panel, it revealed 8 speaker channels (suggesting that it detected the Audigy card as a 7. when in fact it only supports? 5.). When I moved the volume slider on the Creative Surround Mixer (in either direction) it had the effect of moving all but three of the speaker volume sliders in the Windows Audio Control Panel (Right Channel, Left Channel and Channel 8) to zero, with the result that the rear speakers stopped working. Inm other words, Windows was insisting that the speaker setup was 2. and not 4. as in the Surround Mixer selection. ?It made no difference if either or both of the checkboxes ?Synchronize with Windows Control panel? in Creative Audio Console or ?Move all sliders at the same time? in Windows Control Panel were checked or not. This problem is present in both SBAX_PCDRV_LB_2_8_000.exe and SBAX_PCDRVBETA_US_2_8_000.exe. It does not appear to be present with the older driver SBAX_WBUP2_LB_2_09_006.exe, so for now I have rolled back to that. In fact, with SBAX_WBUP2_LB_2_09_006.exe Windows Audio Control Panel only shows 2 channels in the Speaker Volume tab; Left Channel and Right Channel, but all speakers in my 4. system work and the controls in Creative Surround Mixer and Remote Control all work fine. I would like to be able to take advantage of the fixes available in the two newer drivers but they cause me serious problems. Can anybody help? Finally, the presence of a beta driver on the website suggests that a newer version is coming soon. I wonder?if this issue be addressed with the new driver.

I have some problem as you with new drivers SBAX_PCDRV_LB_2_8_000.exe and SBAX_PCDRVBETA_US_2_8_000.exe. Only in my case I use SB Audigy and headphone 5.. Always when I check 5. in Audio Console it reset to 2.. I can set 2. or headphone only.Message Edited by AlkaliX on 09-3-2008 09:53 AM

The problem with Creative Audigy SB0090

Hello.
Installed Creative Audigy SB0090.
Switched off the built-AC97 in the BIOS.
Do not hear a sound. There is a hiss, and through him to hear the faint sound. Plug speakers SVEN IHOO 5.. Help to understand and [email protected]

A can not be compatibility problems with Behola TV 505 FM?
where you can download this version?

Problems with my Audigy X-FI Platimun

Recently I bought the Audigy X-FI Platinum for my pc, replacing my old good Audigy Platinum.
These are my rig specs:
Asus A8N SLI Premium
AMD 64 3800 X2 Processor
ASUS GT6600 vcard
80 GB SATA Drive
60 GB SATA Drive
OS: Windows XP Professional SP 2 32Bit
Desktop Theater 5.1 DTT2200 Speakers.
The problem is that when I am viewing a DVD, playing any game or just listening mp3 the audio just go. I have to "play" a little with the cables that connect my speakers to the audiocard in order to get sound again. But when I hooked the speakers with my Audigy Platinum again I do not experience any kind of problem.
Any help would be appreciated!

No modified .inf file will enable the DTS or Dolby tabs in the Dell OEM XremeMusic. No hacked drivers will do either (maybe in the future).
I have the same card, and I've experimented a bit with it (I bought it to use it rather than to spend my time trying to enable functionalities that I actually don't miss), with the help of some "experts".
The only way to enable those functions involve component soldering/de-soldering on the PCB and firmware flashing.
This is not big issue as there's no warranty to void. Creative won't support this card, neither will Dell unless it was shipped as part of/upgrade of one of their systems.
But if you don't have the relevant skills and tools, unless you want to start hard-modding as a hobby, is just not worth it.
BTW, in my case the total cost was $9.00 deli'vered, so... what can I say? :P
Edit: I just saw in your screenshot the shortcut to "Owner's Manual" so I guess yours is a Dell system. Forget about hard-modding if you don't want to void your warranty big time.
And don't bother downloading the retail CD either. Save the bandwith for something else. There's a hack to install the applications of the retail CD on OEM cards, but it will make no difference whatsoever. It won't enable any extra functions on the card.
You can pick up the phone and complain to Dell if they didn't tell you about this "little" issue though. I have never bought a Dell desktop, so I can't really tell if they warn the customers about the card being OEM and limited in functionalities or not.Message Edited by MrToad on 08-23-2006 05:32 PM

MSI GF615M-P33 problem with sb audigy se

Hi everyone
First of all in case it's useful, here's my system:
Windows xp sp2 32bit
AMD Athlon X2 240 2.8GHz Socket AM3 2MB
MSI GF615M-P33 GeForce 6150SE Socket AM3
Asus Radeon X1550 512mb (old card works fine)
Sound Blaster Audigy SE
Crucial 2GB DDR3 1333MHz/PC3-10600 Memory CL9 1.5V
0 Maxtor 80GB SATAII 7200rpm 8MB Cache
1 Maxtor 250GB SATAII 7200rpm 8MB Cache
G7 680 watt psu
So this is my third msi board and everything is fine except windows is giving me this error code: Your computer's system firmware does not include enough information to properly configure and use this device (sound blaster audigy). To use this device, contact your computer manufacturer to obtain a firmware or BIOS update. (Code 35).
I had a look at what I think is the bios version according to the boot screen A7597nms V2.0 123109 (does this look right?). Also, the advertised version of my board had a red pcb, mine is black and the version is 1.2, don't know if that's important, mentioning anyway.
Now I know the card works with the board because I did something slightly different, (just to see if it would work and save time). After building the computer I didn't reformat the hard drive from the previous mother board, just plugged it in and installed the new chipset drivers etc. Everything fine, soundcard working, except the cpu was only in single core and running very cool; less than 30 degrees c. So, decided to reformat properly, all good, cpu in multi and running around 40 degrees c, but just this problem with the sound card.
Another difference I notice is in windows control panel under Power Options I can't enable 'advanced power management' the option isn't there, so have to switch of the computer manually (which isn't a major problem). In the bios I always disable ACPI as I run a lot of audio processing software and according to some stuff I've read, can cause problems with irq's and all that technical stuff that I don't know much about.
Anyway, to the point. My question is: do I need to update the bios to 2.1 or would it be better to buy a new sound card. I've tried various bios settings and updating the drivers but makes no difference. I've even reinstalled windows with acpi enabled, again, the same error code.
Any help/questions much appreciated. Hope I've explained this well enough.

Quote
So this is my third msi board and everything is fine except windows is giving me this error code: Your computer's system firmware does not include enough information to properly configure and use this device (sound blaster audigy). To use this device, contact your computer manufacturer to obtain a firmware or BIOS update. (Code 35)
Quote
In the bios I always disable ACPI as I run a lot of audio processing software and according to some stuff I've read, can cause problems with irq's and all that technical stuff that I don't know much about.
What HAL is installed? Look in device manager under "Computer"

More problems with iTunes 9.1.0.79

Hi,
since I have had my iPhone I have upgraded itunes a couple of times and never had any problems until now.
I upgraded to 9.1.0.79 two days ago and am having all sorts of issues.
Now when itunes starts it takes ages.
When my iphone is connected I get a message saying:-
+itunes cannot sync information with the iphone 'iphone' because syncing has been disabled on this computer+
I click the yes button to enable syncing and then receive an error message:-
+itunes was unable to load provider data from sync services reconnect or try again later+
I then click OK and my phone appears in the devices list.
These error messages happen every time I start itunes, so by me clicking the yes button to enable syncing does absolutely nothing.
My iphone will sync fine just that itunes tends to freeze up and is very slow.
I run a diagnostic from the help menu and without my iphone connected it shows a red dot next to 'No iPhone or iPod found', which is correct but when I have my iphone connected this red dot is now orange, what is the difference in colour?
I have turned of all anti-virus and firewall software but itunes is still the same, very unresponsive, so anti-virus/firewall is not the problem.
I followed to the letter:-
http://support.apple.com/kb/HT1925 and totally uninstalled everything and then reinstalled itunes only to find the same problem persisting.
This is definitely a problem with itune 9.1.0.79 and apple should be addressing it pronto.
Here is the data from the diagnostic run and it shows my iphone as not found even though it is connected, showing in devices and I can sync to it, wierd!!
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
To Be Filled By O.E.M. To Be Filled By O.E.M.
iTunes 9.1.0.79
QuickTime 7.6.6
FairPlay 1.7.16
Apple Application Support 1.2.1
iPod Updater Library 9.0d11
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.0.0.102
Apple Mobile Device Driver 1.46.0.0
Bonjour 2.0.0.34 (214.3)
iTunes Serial Number **************
Current user is an administrator.
The current local date and time is 2010-04-12 20:39:07.
iTunes is not running in safe mode.
Video Display Information
ATI Radeon HD 2600 XT AGP
** External Plug-ins Information **
No external plug-ins installed.
** iPod/iPhone Connectivity Tests **
iPodService 9.1.0.79 is currently running.
iTunesHelper 9.1.0.79 is currently running.
Apple Mobile Device service 3.0.0.0 is currently running.
Universal Serial Bus Controllers:
VIA Rev 5 or later USB Universal Host Controller. Device is working properly.
VIA USB Enhanced Host Controller. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
VIA OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
Most Recent Device Not Currently Connected:
iPhone 3GS running firmware version 3.1.3
Serial Number: *********
** iPhone/iPod touch Sync Tests **
Sync tests completed successfully.
I have blanked out serial numbers etc..
Regards..,
K :0(

notice how under diagnostics readout it shows "most recent device not currently connected"
mine does same thing and i have iphone connected when i do it.
my problems also started with this update and i show 4 errors in event viewer which is under adminastrative tools in control panel.
MY problem is super slow backups for a 16gb 3Gs with 12gbs free. a backup used to be done in like 30-45 seconds now takes about 5 minutes and looks as if it stals at a few points when looking at bar at top of itunes.
my iphone shows up in itunes and shows all pages etc. i do everything manually although i do sync apps.
everytime i connect iphone and open itunes i get 4 errors thats show up only in event viewer (but anyone who maintains computers should be aware of all tools available to them to see whats going on in the background) that show up for "BONJOUR" i have posted this here and under bonjour forum. i turned off bonjour services the proper way again thrru adminastrative tools>services double click bonjour and change for "automatic to "disabled". don't do it through msconfig as some would tell you to do if it's a bonjour issue.
but checking out event viewer can give you valuable info so you don't do the apple nonsense wasting hours to clean up their messy installation only to have it do exact same thing again. it's obvoius they have a conflict.... now we can only hope for a resolution ie UPDATE if enough complain by sending them all this.
i don't have a jailbreak phone nor am i rebuilding anything i'll live with it till they fix it as my event viewer log isn't getting filled up with bonjour errors anymore nor do i need all this bloated crap apple sends our way... i do have quicktime pro.

More problems with frames DOH!

Hokay, so, here is my program:
import java.awt.*;
public class ShowAFrame
     public static void main(String args[])
          Frame f;
          String myTitle;
          myTitle = "Test";
          f = new Frame();
          f.setTitle(myTitle);
          f.setSize(500,500);
          f.setIconImage(new ImageIcon("c:/javaprograms/book2.gif").getImage());
          f.show();
and here is my error message:
C:\JavaPrograms>javac ShowAFrame.java
ShowAFrame.java:13: cannot resolve symbol
symbol : class ImageIcon
location: class ShowAFrame
f.setIconImage(new ImageIcon("c:/javaprograms/book2.gif").getImage());
................................................... ^
1 error
I feel really stupid asking, but since this is a beginners forum, what am i doing wrong?
btw, the dots are added to manually move the carrot
Thanks

hint #1:
1) When it tells you: "ShowAFrame.java:13: cannot resolve symbol" it's saying that there's a problem with line #13, specifically, that there's a symbol that it doesn't understand.
2) Look at the carot. What's it pointing to?
Now, put 1 and 2 together. The compiler is telling you that there's a word on line 13 that it doesn't understand, and then it shows an arrow pointing to a word on line 13. Any guesses as to the culprit?
hint #2:
learn about import statments and their purpose

One more Problem with SAP query

Hi All,
I am having a problem with SAP query
Execution of SAP query transaction is leading to Dump
the dump says Field 'R01' contains no fields, syntax check on the program shows same error.
When I tried regenerating the Query in SQ01
" Query Specification cannot be use to generate list
Ranked list contains only numeric fields
Please help me

Gianpiero Bucchieri wrote:
> So its important to listening the following tables too: Faktura (invoice), Partner Role, Partnernumber and the requierements number. The table are EKKO EKPO AND VRKPA OR vbkd, but if I join this table the query doesn't listining any results. If I cancel this 3 or 4 table and I start the query, the listening are ok.
>
I am not sure what business process you are describing here - is it some kind of third-party sales order? If so, your join is wrong.
From VB E P, firled BANFN and BNFPO you can go to table EBAN, where in field EBELN you will find the number of the purchase order (if somebody already had an MRP+Me58 run over the PR) which will lead you to table EKKO, and EKPO.
So what we have here (essentially is):
VBAK -> VBAP -> VBEP -> EBAN -> EKKO -> EKPO
But that only solves one of your problems - you still have a long way to go to get invoices, partner and partner roles into there and I am beginning to ask myself what exactly it is you want to evaluate.
Care to explain?
Edited by: Mylène Dorias on Apr 1, 2010 2:10 PM

More problems with new itunes not starting

Hi,
Have recently downloaded upgrade of iTunes and experienced the same problems as a few others - no response when trying to start it up. I was very happy indeed yesterday when the Quicktime standalone fix worked and my music reappeared. However, on restarting today, it's back to the square one - no response! Am I doing something wrong or is there anyone who can help?
HP Windows XP

I'm having the same problem on my desktop. I've done both a spyware search using ewido, and a virus check using symantec, neither of which helped. I tried uninstalling and re-installing and that also didn't help. Each time I try staring itunes I get the message:
iTunes has encountered a problem and needs to close. We are sorry for the inconvenience.
I'd be happy to send the error report that I get along with this message.
Oddly enough, this problem is only occuring on one computer. I have no problem with it on my laptop. I hadn't updated itunes for a while on my desktop.
Windows XP

Problem with SB Audigy 2 and Creative Mixer *GERM

Moinsen,
ich habe seit meiner Neuinstallation Probleme mit meiner Audigy 2 Karte.
Ich habe auf meinem Rechner WinXP Prof. SP2 , DX 9.0c ,neuinstalliert und direkt danach die Soundkarten Treiber ?ber das Internet von Creative.com installiert.
Ich habe das File "SBAX_WEBUP_LB2_08_0004" ( 34,2 MB ) installiert.
Anschliessend neugestartet und noch einmal ?ber Creative.com ein Autoupdate durchgef?hrt, dabei habe ich folgende Files downgeloaded & Installiert.
"Creative SoundFont Bank Manager Web Update ver .00.2__" ( 6,09 MB )
"Creative MediaSource Player_Organizer 3.30.2__" ( 52,2 MB )
"Creative MediaSource Go! 3.0.5__" ( 2,3 MB )
Neustart. Anschliessend noch :
Gracenote "CDDB_PCApp_LB_2_40_02" ( 3,99MB )
Neustart.
Nun hab ich das Problem das ich leider meinen "alten" SURROUND MIXER und mein SPEAKER SETUP nicht mehr installieren kann. Beide brechen mit der Fehlermeldung " Die Erforderlichen Komponenten wurden vom Installationsprogramm nicht erkannt. Das Installationsprogramm wird beendet " ab. Was kann ich da tun ? Genau DIESE BEIDEN Programme sind recht Wichtig f?r mich.
w?re Super wenn mir jemand helfen k?nnte ?
Greetz,
Day

Vielleicht habe ich das auch mit der Installation der Audigy verwechselt. Sorry.
Wenn ich derzeit die Treiber der X-Fi installiere, installiere ich immer die ben?tigten Anwendungen von der Original-CD. Erst danach mache ich die Updates von der Web-Seite drauf - allerdings immer manuell. Das Autoupdate habe ich leider noch nie probiert.
Bei der Audigy und 2 habe ich am Schluss auch immer nur die Treiber installiert, sonst nichts. Die Lautsprecher-Einstellungen habe ich dann einfach mit der Audio-Console vorgenommen. Lautst?rke, Bass, H?hen kann man ja genausogut mit den Standard-Windows-Programm vornehmen, den Sinn der zus?tzlichen Creatve-Programme ging mir zunehmend verloren. Bei der X-Fi kann ich leider nicht alles mit Board-Mitteln einstellen, deshalb installiere ich nun wieder die Software..
An Deiner Stelle w?rde ich alles mal deinstallieren. Dann Original-CD und die heruntergeladenen Updates installieren. So klappts bei der X-Fi wunderbar.
Gr?e
Charles

I am having more problems with 10 for Mac than the old one. Al ot.

All sorts of problems. It gets stuck. They have actually appologized the first time I used it and I had to turn off computer. The latest was I couldn't upload a file in an online email. I didn't have problems with the old one which was quite old.

All sorts of problems. It gets stuck. They have actually appologized the first time I used it and I had to turn off computer. The latest was I couldn't upload a file in an online email. I didn't have problems with the old one which was quite old.

More problems with my audigy se c

Similar Messages

Maybe you are looking for