More than one view points

hi there !
i'm new at 3D ...
i was wondering if it is possible to have more than one "camera" (view point) at the same time.
ex:
cam1: top view
cam2: front view
cam3: perspective view
tnks!

It is possible!
You can add multiple View Object to a ViewPlatform and you can add multiple ViewPlatforms to a BranchGroup. Hope it helps.

Similar Messages

More than one view with iphone SDK.

Hi
I'm trying to make more than one view in Interface Builder and then switch between them in xcode. But I can not figure it out.
I tryed reading guides, watching tutorials, but with no luck.
Can anyone here give me a small tutorial on how do that?

Your best bet is to look through the code (and xib files) distributed by Apple. I was in much the same position a couple of months ago, except my expertise was in JEE. It is really not that difficult to get going. Just a regular Cocoa development book can also help you (it helped me understand how to get going).
Here is what you will start with
ApplicationDelegate - Will be connected by default in your primary xib file. For simple applications that is all you need. If you need multiple views, you can still make the primary nib file you primary view and lay it out as you need. Add methods as appropriate to remove current view and display next view you want.
Xxx.nib - Your primary xib file. Layout out as required. Create a UIViewController and connect to the File's Owner. That connects your controller to the view. Make connections to the view components in the xib file, event handlers etc. It is not difficult, but IMO IB is not very intuitive, though you will get the hang of it very quickly.

How to group more than one view in a single window?

Hi,
I want to group three or more views in a single window.
I need a element, which is similar to VIEW SET in webdynpro for JAVA.
how to do it?

Hi,
In wd-abap the concept of viewset is not used instead the viewContainerUIelement is used to achieve the same.
create a main view say v_main in that add ui control viewContainerUiElement
create a another view say v1.
go the the window .. embed this view v_main to the window , u can see then below the view the control viewContainerUielement , in that u can add the view v1 inside this container . so if u create more containers inside the v_main ,then u can display more view inside this and the plugs can be created and fired as same as in java.
Hope this will help u .
Regards
Yashpal

Share Screen Issues With More Than One Viewer and ...

Tried to do it multiple times and Skype doens't offer the normal screen choice window and then is locked i.e. you can't hang up the call nor do anything. You ask the viewer/callers to hang up for you and then redieal. HUGE bug.

Hi,
You can create a shared workbook and place it on a network location where several people can edit the contents simultaneously
Just go to the Review tab, in the Changes group, click
Share Workbook.
However, not all features and functionalities are supported in a shared workbook. Please review this article for more details:
http://office.microsoft.com/en-us/excel-help/use-a-shared-workbook-to-collaborate-HP010096833.aspx
Hope this helps.
Thanks,
Ethan Hua CHN
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

A table haing more than one view

Hello Gurus,
I have one standard view V_FAGL_T8A30 which is working properly. But there is one Z VIEW which is similar to the previous view .So when I am trying to display values through sm30 I get to see the values maintained in the standard view. So when i try to make new entries to the view i get an error that the proft center values doesnt exist in CEPC. But the values are maintained in the CEPC table .
Regards,
Abhishek.

Hi Abhishek,
Check the foreign key relation between the table-field of Z view and field of CEPC. May be the domains are different. One of the domain may be having conversion routine and the other may not be having it.
Regards,
Arun Mohan

Wireless Roaming with more than one access point

Dear All,
I am trying to set up roaming access points around my home. My main router is the Hub 3 and what I am doing is setting the SSID and channel i want on the hub 3 then setting the same SSID on the additional access point (WNR1000v3) and disabling DHCP on the additional access point and setting a static IP and a different channel to the one on the hub 3.
The problem I am getting is that my devices (android smartphone and tablet) will either only connect to one of the access points when I am near it and then when I go to the area that the hub 3 is in it drops the connection.
I want to know why this is happening because at another house where I work I have additional access points broadcasting the same SSID as the home hub 2! which works.
Please could someone tell me why this is happening and what I can do to prevent it.
Many Thanks,
Dominic
Solved!
Go to Solution.

dombullion wrote:
Thanks for the reply Keith,
But why does it not allow for Roaming?
There is an internal Ethernet switch which routes the Ethernet frames to a specific device MAC address, via the wireless module, or the LAN ports, but not both.
Once a device MAC address appears on the LAN side, all frames are routed to that interface, until the physical interface is disconnected.
That prevents the same MAC address connecting to the wireless interface.
Universal wireless repeaters do not have that problem, as all connections take place on the wireless interface.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

How to create more than one save point in session

Hi,
I'm using Jdev 12c.
I'm trying to use the SavePoint in ADF. When I try to use createSavepoint() function of SavePointManager to create savepoint I met a problem is only one row of savepoint is created in DB (table ADF uses to kept the savepoint in DB) and it overrides the old row whether how many times I uses createSavePoint() function. I want to when I call createSavePoint(), a new row of savepoint is created instead of overriding . Below is my code:
        ControllerContext controllerContext = ControllerContext.getInstance();
        String savePointId = null;
        if (controllerContext != null) {
            SavePointManager savePointManager =
                controllerContext.getSavePointManager();
            if (savePointManager != null) {
                //creating the save point
                savePointId = savePointManager.createSavePoint();
                //putting the save point id into session scope
                ADFContext.getCurrent().getSessionScope().put("savePointId",
                                                              savePointId);
Could anybody help me this problem?
Thank you very much.

Dear Frank,
Thank you so much for your answer. Beside the save point functionality to save the state and values on the screen, do you know other ways to do the same function? Once again, thank you so much.
Linh Nguyen.

Setting up inspection point in a scenario require more than one inspection

Hi all,
Maybe I am still not very clear on the PP-QM conceptu2026 hope you can see my problem on the following questionu2026..
According to SAP in the QM-production environment, we key in ONE inspection point in the task list header level (i.e. either the master recipe, routing, or rate of routing).
Based on the following business scenario which is going to use inspection point for the inspection:
u2022     Time-based intervals (for example, an inspection point every hour or for each work shift)
u2022     Quantity-based intervals (for example, an inspection point for each container)
u2022     Freely-defined intervals (for example, an inspection point each time a tool change occurs)
Since each of the above scenarios require more than one inspection points to be created and to be assigned to the task list header.
Thus, how to accomplish multiple inspection point assignment when the task-list header only allow me to assign one inspection point at a time?
Thanks
YY

Hi guys,
Thanks. However, in the SAP help portal it does said the system allows several inspection points to be assigned to an inspection operation whether it is in routing or recipe.
Therefore, does it means I can assign more than one inspection points in the operation detail level for either recipe or routing if I will to click the u201CNo relationu201D radio button in the u201CQuality Management: Inspection Pointu201D section. (i.e. is this is the right place to allows this assignment)?
For example, on the change master recipe screen at the Operation tab, I highlight one line item (i.e. one operation line item and zoom into this operation line item, I donu2019t see any field box that allow me to assign several inspection points to an operation? Instead, on the u201CQuality Management: Inspection Pointu201D section, there are the following fields appear:
- Insp.pointCompletion dropdown box
- 4 radio buttons on the inspection interval (ie. Time-related, Qty-related, No-relation) and its subseq time and quantity value input box.
- Quan.pt. lot checkbox
- Last Part Lot Assgmt checkbox
Thus, where is the section in the operation overview screen at Master Recipe or Routing level that I can assign several inspection points?
Thanks
YY

On my iPad 3, how do I make calendar items lasting more than one day appear as such on the monthly view of my calendar? Right now only the first day of the item appears.

On iPad 3, all of my calendar items lasting more than one day do not appear correctly when looking at the monthly view of the calendar; only the first day of the appointment appears. For example, if I am taking a vacation for 4 days, only the first day of the vacation is marked on the calendar, instead of being listed on all 4 days. When I look at the weekly view, however, it is correct and is listed on all 4 days. The problem here of course is that at a glance, there is no way to look at my monthly schedule. On my iPhone, everything is correct, regardless of month or week view, so clearly this is an iPad problem I guess? Please advise on how this can be corrected. Thank you!

Unfortunately you can't do what you want. Many people have complained to Apple about this. I suggest you provide Apple feedback directly at http://www.apple.com/feedback/macosx.html. They will not provide a direct response but hopefully if enough people provide feedback Apple will fix this.

Not able to view data from more than one data package in PSA

Hi Friends,
Desparetly trying to view data in PSA. Problem :
If i mark more than one datapackage this error raises:
You must only select one data packet when entering data record numbers
Message no. RSAODS127
And there is no change to reset data record numbers.
What is wrong ?
Thanks in advance for help.
Joe
BW3.5, SP21
Edited by: J.F.B. on Jul 2, 2009 11:40 AM

Hi again,
Seems I'm too stupid for this issue.......
As I understand there are two ways to view PSA :
1. PSA maintenance in RSA1
2. In SE11/SE16 viewing the underlaying transparent table
ad 1.
When I try to filter erroneous records for more than one datapackage situation is as described above.
ad 2.
Trying to view the table works, but where is the chararcteristic/field marking a record as erroneous
in table /BIC/Bxxxxxxxx (table containing PSA-Data) ?
Thanks
Joe

How do I merge more than one PDF document into one singular pdf using adobe viewer touch on a microsoft surface?

How do I merge more than one PDF document into one singular pdf using adobe viewer touch on a microsoft surface?

Or using the Adobe PDF Pack https://www.acrobat.com/

How do I view more than one image at the same time in CS6?

How do I view more than one image at the same time in CS6?

Hi there
If you go to Window > Arrange you can choose from several view options. Below I have selected Two-Up Horizontal since I have two images, but you can select other options if you have more than one image.

How to view more than one file at a time in CS4?

With OS 10.5, and a brand new CS4 Photoshop, I can open many Photoshop files at a time, but can only view one at a time. Must choose one at a time from the "tab". I need to have more than one picture open and showing at a time to work on them. How can I do that? What have I missed? Who can help? Thanks!

"Here's the smart way for all of you on macs. Set up Exposé and a keystroke for 'Application windows'. Then with the press of a single key you can visualize, and swap between documents very easily. By I single keystroke I mean something like Right Control.
Tabbed documents have hardly any genuine advantages for mac users, yet another example of interface decisions in the stupid direction."
This is what I've been saying since I first saw the tabbed view in the new CS4. On the Mac, tabbed view is a big step backwards as it actually breaks the superior Expose' method of viewing multiple windows and also switching among them. I would also add that Control/Tab for non-tabbed windows is actually slightly faster than when they are tabbed. So for the mac, I only needed a minute to decide that the tabbed view was merely change for the sake of change. There are also operations that I do where I have to recreate a piece of art to match an existing piece. In those situations I always have the original right next to the the new image. Tabbed view destroys this as well. So I don't use it.
For the PC, tabbed views is possibly a tiny step forward, but it's such a small step that I'm not sure if I prefer to use tabs, or have that small amount of screen space that the tabs use. There was no previously existing "good" method of viewing and moving among multiple windows of a single application on the PC and therefore, tabs might be a small improvement. Unfortunately though it does seem that in order to bring us tabbed views in CS4, Adobe had to slightly 'break' the regular floating windows view. On the PC the documents will actually float above the toolbars, palettes,etc making it very difficult to use if not impossible. So, if you don't like using tabs, then you are really gonna suffer with non-tabbed view or suffer with the tabbed view. On the Mac, it's the opposite problem. Documents actually float up and underneath the top toolbar, covering the "close, maximize, minimize" buttons. Generally I would say that Adobe has created a mess when the best solution was obvious. Adobe should have copied the expose' method for it's CS4 suite. Hopefully they will have enough feedback with CS4 to see the light and change it for CS5. I see that Microsoft has mouse software that has already done just that on the PC, and there are a handful of independent efforts attempting to come up with something like expose' but generally with far less elegant and less "perfect" results.

ORA-01776: cannot modify more than one base table through a join view

I have created EO based on a database view than consists of two tables, and only one is updateable.
When I try to update a row using EO, I got a following message: "ORA-01776-cannot modify more than one base table through a join view"
In Forms, this issue is resolved by setting "Query Only" property of non-updateable items to "True".
Is it possible to do something like that in ADF BC?
Thanks

Thanks for answer.
When I set "updateable" property to "Never", that attribute is protected from any change.
I'm sorry for incomplete usecase.
I have set up a list of value on that attribute, because it is a lookup field for another table and I need to get an ID from that table.
Basically, I need that attribute to be updateble for BC, but not for database.
Edited by: MarioK on Oct 13, 2011 9:28 AM

Cannot modify more than one base table through a join view

hi guys, my current problem is that i have a datablock based on a view, now all the fields bar 1 are updateable, but this one field that is obtained through a join is displayed, the user can enter data in this field which then pupulates other fields which are required, but this specific field should not be updated. Is there an option to state this as i keep getting the error:
cannot modify more than one base table through a join view
Any help would be greatly appreciated, thanks.

the user can enter data in this field which then pupulates other fields So, using the value of "this field" you then query the rest of the fields? Can you show us the code you use to populate the rest of the fields?
but this specific field should not be updatedHave you tried setting the "Query Only" property of the field to "Yes" and the other DML properties (Ins, Upd, Del) to No?
Also, what is your Forms version?
Thanks,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

More than one view points

Similar Messages

Maybe you are looking for