MotoSpeak Might Work But it Helps to Have a Compatible Device For it To Work
I wanted to try the MotoSpeak App that's in the Market But there is one stipulation to making it Work Correctly an that is a Compatible Working Device: These 3 Head Sets & Car Speaker work with it an i found at the Verizon Web site There are two more Head set's they show that work with it but i could not find them on the Web site.
Do I understand are you asking can you configure the ASA to allow an external user run a scan against the internal network?
If so, the answer is generally no. The ASA will, by default, not allow any inbound connections (or attempted connections) that are not explicitly allowed in an inbound access-list (applied to the outside interface). In most cases there would also need to be network address translation (NAT) rules configured.
If you had a remote access VPN, you could allow the external scanner to log in via that, Then they would then have the necessary access to scan the internal systems (assuming the VPN granted access to all the internal networks)
Similar Messages
-
I'm having trouble upgrading to ITunes v12.0.1 with
Win 7. Download progress bar stalls and eventually cancels itself. Have tried
Tools --> Download Only, but same result. Have been using iTunes for 3+
years without difficulty; I have lots of ram, hard drive and speed.
Thanks for your inputOne step listed in the link to "helpful" info, was (when Iooked 30 seconds ago), to search for and download the newest version of iTunes. I'm running iTunes on Win 7 machine and was prompted to update today, 10.22.2014, and did so without a problem. Having said that, however, it looks as though the latest iTunes (12.0.1.26) is finally doing what the last version refused to do, which is to actually fully populate all my playlists on my 6, but there is a hitch: 12.0.1.26 will NOT allow you to show the sidebar unless you click on "playlists," that is, you cannot keep it open all the time.
And, when plugging the 6 into the computer, the phone icon shows up but clicking on it does nada. What does work, for some strange reason, is clicking on the tiny icon (just under the "Store" menu link at top screen) which looks much like a tiny barrel, someone's idea of external drives, I suppose. The phone then comes up, with the list of stuff on the phone just under it where the sidebar used to be. Sync is now restricted to the lower right of the screen.
Apparently, you will also need to update your iPhone's software as well; some friends with the 4 and 4s, however, had troubles with them after upgrading. The message from Silicon Valley (I can see Apple from my backyard, ha ha) is apparently, "keep upgrading," folks, get rid of those old phones. -
i have samsung corby gts3653 mobile and need to connect internet to mac through it but it doesn't have wifi and pcsuite for mac and how could i able to connect it, through gprs? GPRS is active in mobile but unable to link it with macbook pro(using lion os) can any one reply.
Until the MacBook Air was released and supported in 10.5, the Mac did not consider USB to be a valid Networking Protocol. So set the Mac with USB solutions aside.
To connect computer-to-computer, you typically need to be using an Ethernet crossover cable. Assigning the same address to two Ethernet devices is never the solution -- it gives a Network Conflict, just as you said.
If your Windows box has some mechanism for Sharing its WiFi connection over Ethernet, you would have to follow its rules. Whether that means Manually assigning an Ethernet Address in the same range or the PC will provide the Address, I do not know.
Best success may be running an Ethernet cable to your Wired/Wireless Base Station, or using a "gaming adapter" (Ethernet-to-Wireless no drivers required) connected to the Mac's Ethernet port to give it WiFi access. What is your Base Station {Cable, DSL, FIOS, Other} ? Ethernet cables can be up to 100 meters (an American Football Field). Often the Base Station can be moved closer for more convenience. -
i lost my ipod. when i went on the cp to go find it but there was no connection yet, so i waited but got bored so i pressed delete device for no reason now i can't even connect to it no more. please help me. please.
If you only deleted the device from the page (an did not wipe/erase it) it will reappear if it connects to the internet before the person restored it or tyrned off the Find feature. See:
http://support.apple.com/kb/TS4006 -
I want a soundbar for my 6th generation nano but am having trouble finding a compatible device. I'd like more than a dock, ideally a soundbar with wireless subwoofer. I'll only use the soundbar for music, not TV home theater. Any suggestions? Thanks.
Google
-
help i have lost my password to log into itunes and have a new email address but can't change this because i can't login?????
Whenever a menu choice is grayed out, that is because you have Restrictions turned on in Settings. Be sure to turn it off.
You are confusing an itunes store account with an icloud account. You two can continue using the same ID for itunes (thus sharing purchased music, apps, etc.), but you really should have separate accounts (different IDs) for icloud, since an account is intended for one user to keep his/her devices in sync.
To create a new icloud account, go to
http://www.apple.com/icloud/setup/
Then go to Settings>icloud and scroll to the bottom of the screen and tap Delete Account. (have restrictions turned off) That will disconnect the device from the account but will not delete data in icloud or other devices. Then sign in using the new ID. -
The user manual says to go Mailboxes and click the Edit button to add a Mailbox, but I do not have an Edit button displayed in Mailboxes. Is there a setting for displaying the Edit Button? I have the latest version of iPad (Model MD328LL). Thanks.
If you go to your email account in the Mail app and look at the window where your inbox, trash folder and sent folder are - if there is an Edit button at the top of the window - tap that and then tap Add Mailbox at the bottom.
If the Edit button is not there - you cannot create folders on the iPad. Your email account is not IMAP. Only IMAP email accounts can create folders on the iPad. Any folders that you would already have in an IMAP account would sync to the device as well. -
I installed Mountian Lion and moneywiz. I do not have a qif file from my old Quicken 2007 for mac. I do have a Quicken backup. how do I inport this into moneywiz?
Can't help with moneywiz, but $15 Quicken for Lion works w/ML.
-
I have a ipod touch 4th gen and it wont chrage. When you plug it into the wall the lightniing bolt screen will apear but no matter how long you leave it, it will never turn on. Also it the lightning bolt screen wont even come on when you plug it into a computer (PC)..........PLease help its been like this for forever
Hi Gammer576775!
Here is an article that will help you troubleshoot this issue with your iPod touch:
iPod touch: Hardware troubleshooting
http://support.apple.com/kb/ts2771
Will not power on, or will not turn on unless connected to power
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Connect the iPod touch to an Apple USB power adapter and let it charge for at least ten minutes.
After at least 15 minutes, if the display turns on and…
The home screen appears, the device should be working. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen: . Then disconnect the device from power. If it immediately turns off, seek service.
The low-battery image appears even after the iPod touch has charged for at least 20 minutes: See the "iPod touch displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or low-battery image appears , continue with this article for further troubleshooting steps.
If the iPod touch did not turn on, reset it while connected to an Apple USB power adapter. If the display turns on, go to step 4.If the display remains black, go to the next step.
Restore the device. Connect it to a computer and open iTunes. If iTunes recognizes it and indicates that it is in recovery mode, attempt to restore the iPod touch. If the device doesn't appear in iTunes or if you have difficulties in restoring it, see this article for further assistance.
If restoring the iPod touch resolved the issue, go to step 4. If restoring it did not solve the issue, seek service.
Thanks for using the Apple Support Communities!
Cheers,
Braden -
I have a Macbook with a 500 GB Hard Drive. A routine check on Disk Utility told me the disk needed to be reformatted. I restarted from an external USB drive, but when I try to use Disk Utility to repair the HD or to reformat it, Disk Utility is unable to do anything with the HD (cannot repair, cannot erase,cannot reformat the HD). Is there a utility App that can help me with this, or is the HD unrecoverable?
Hi
Thanks very much for your reply. We have been starting up from a backup (USB) drive and use the disk utility that is on the backup drive so the internal (problem) HD is not being used for anything (except for wanting to repair it). Still Disk Utility cannot reformat or repair the drive. I have also run Onyx but it tells me everything is OK on the drive.
But I have made a little progress. Using my old install disk for Snow Leopard (10.6.3) I have managed to do a fresh install of the system on the internal HD. Unfortunately, I also asked the install disk to transfer/migrate the settings and documents from the backup drive back onto my internal HD. The install appeared to work, but then it got hung up on copying the documents from my backup drive to the HD. After letting it sit for 2 days without going anywhere, I stopped the install process. I am going to try again, just using my Snow Leopard CD to install Snow Leopard, and nothing else. If that works, I will then get on to the problem of copying the rest of the settings and documents from my backup.
But since the Mac works OK off the USB backup, and will also run off the install CD, I am guessing the problem is with the HD and the only solution might be to replace it if I can't repair it. But the macbook is several years old, and I am not sure it is worth buying a new HD for it. -
What to do if you have too many devices for 1 apple Id
I have too many apple devices to sync. Only one apple I'd at the moment. I am trying to figure out what to do? I have 3 iPads a 2 iPods and 1 iPod touch and an iPhone that I want to use the same overall library of content. What should I do when you can only have a maximum of 5 apple devices on one computer? Sorry not an apple genius.
If you asking me, I would suggest to additonally use a second storage service which also allows you to store your pictures over the 30 days period. I personally use Dropbox with automatic upload for that (https://db.tt/cMEgDUFZ), but there are also other storage services like Flickr for example.
-
i have problem with fonts for my site, i have used "Lucida sans unicode " family for certain texts. it shows perfect in mozilla 3.5 and mozilla 4. But the font not supporting in mozilla 5.0? please help me
i have problem with fonts for my site, i have used "Lucida sans unicode " family for certain texts. it shows perfect in mozilla 3.5 and mozilla 4. But the font not supporting in mozilla 5.0? please help me
-
on my ipad it says ipad is disabled connect to itunes but i try and connect it to itunes and says i needvto wright the password in the ipad first but cant help please
I have the same problem with my ipod touch ... but im trying to find a way to fix it without restoring it...
but one fix is to shut it down completely ... then press and hold BOTH the power button and the home button .. hold both of those 4 ten seconds .. then release the power button but still hold down the home button .. and then it'll show something that says "connect to itunes" once u get it connected to itunes , click the restore button ... BEWARE THIS WILL WIPE OUT EVERYTHING ON YOUR IPOD!!! IT WILL RESTORE IT BACK TO FACTORY SETTINGS , AS IF U JUST BOUGHT IT !!!!! then it should work fine again .. but u will lose all data on there besides the things you have synced with itunes already..
Thats y im iffy with doing this , im trying to find a fix where i wont have 2 restore it but i dont think there is 1 :'(
good luck tho
~sam -
My contacts were saved onto I Cloud but I don't have an Apple device to load them again.
I'm still paying off my stolen cell and am usiing a Nokia in the meantime.You can download your contacts from icloud.com as a vCard, as explained here: http://support.apple.com/kb/PH3606. This can be used to import them to another service such as Google contacts. If your Nokia phone supports it, you could then set up your Gmail account on your phone and enable contacts syncing to view them on your phone.
-
I have an android sprint evo ,I want to get firefox in order to avoid being tracked by google ,but it says I have to sign up for google to get firefox this makes no sense
http://www.mozilla.org/en-US/firefox/fx/
Maybe you are looking for
-
When I try to use the print/save as pdf option, I get a scripting error and Firefox usually freezes.
On my MacBook Pro running OS 10.5.8 and Firefox 3.6.13, I am trying to save documents as pdfs under the print window, I get a scripting error and Firefox usually freezes/becomes nonresponsive. This happens every time I tried to perform this task.
-
Publishing to .mac - how many domains can i have?
ok. I have a .mac account. I have a domain name outside of .mac. I have used iWeb and have published my pages to .mac. My domain name, let's call it myname.com, is pointed to my .mac domain. So instead of going to web.mac.com/myname, it goes to mynam
-
Seeing bigger fonts in mail reply
When I open my mail application, I see everything in small fonts. I dont use a browser for gmail since its reply box is too small and causes errors for serious emailing. In the mail app, if I do cmd++++ I see everything bigger. But when I press repl
-
HP VirtualRooms seem to connect but the room content does not display.
When initially connecting to the HP Virtual Rooms system: http://rooms.hp.com, all looks well and I can enter a conference/meeting key and after hitting the 'go' button and I am greeted with a 'Thank you for joining us message'... but there is no act
-
How do I make an action only apply to PDFs (in a folder)?
I am trying to attemp to create an action which I would apply on a folder. I want to resave all PDFs in the folder to open with the Navigation Panel open. Is there a way in the action step set up to specifiy that this action only happen to PDFs? O