Mount usb thumbdrive

hi there,
need your help.i run #volcheck when i'd like to detect the mounted floppy disk.what about usb thumbdrive? wud like to mount it and access it but i cant see is when i run df -k.
please help how i can mount my thumbdrive and the files on it.
thanks.
rgds,
kim

depending on OS version -
I haven't been running vold on the Solaris 10 machines I'm playing with - and on them, I simply plug in the memory stick into either the onboard USB 1.1 connection, or into my Adaptec USB 2.0 interface
once connected, you should be able to "rmformat -l" to see the devices have changed -
from my own experience, I've only been able to see/use fat32 formatted drives with the mount -F pcfs (mountable rw or ro) commands, and ntfs formatted drives with mount_ntfs (mountable ro, downloadable from web), but you can still mount the drive on your sparc/x86 machine and put ufs/zfs/vxfs on it - and since it's removable format media, you will only really be able to use the "whole" drive versus laying down your own vtoc on the disk (unless somebody knows how to get around that one) - regards - jeff
#### snip ####
root@node1:/# uname -a
SunOS node1 5.10 Generic_118833-36 sun4u sparc SUNW,Sun-Blade-100
root@node1:/# rmformat -l
Looking for devices...
1. Logical Node: /dev/rdsk/c0t1d0s2
Physical Node: /pci@1f,0/ide@d/sd@1,0
Connected Device: Memorex DVD+-RAM 510L v1 MWS7
Device Type: DVD Reader/Writer
2. Logical Node: /dev/rdsk/c3t0d0s2
Physical Node: /pci@1f,0/pci@5/usb@0,2/storage@1/disk@0,0
Connected Device: Maxtor OneTouch III 035f
Device Type: Removable
3. Logical Node: /dev/rdsk/c4t0d0s2
Physical Node: /pci@1f,0/usb@c,3/storage@3/disk@0,0
Connected Device: USB Flash Memory 6.50
Device Type: Removable
#### INSERT THE DRIVE ####
root@node1:/# rmformat -l
Looking for devices...
1. Logical Node: /dev/rdsk/c0t1d0s2
Physical Node: /pci@1f,0/ide@d/sd@1,0
Connected Device: Memorex DVD+-RAM 510L v1 MWS7
Device Type: DVD Reader/Writer
2. Logical Node: /dev/rdsk/c1t0d0s2
Physical Node: /pci@1f,0/usb@c,3/storage@4/disk@0,0
Connected Device: STF Flash Drive 2.0 2.00
Device Type: Removable
3. Logical Node: /dev/rdsk/c3t0d0s2
Physical Node: /pci@1f,0/pci@5/usb@0,2/storage@1/disk@0,0
Connected Device: Maxtor OneTouch III 035f
Device Type: Removable
4. Logical Node: /dev/rdsk/c4t0d0s2
Physical Node: /pci@1f,0/usb@c,3/storage@3/disk@0,0
Connected Device: USB Flash Memory 6.50
Device Type: Removable
root@node1:/# mount -F pcfs /dev/dsk/c1t0d0s0 /mnt3
root@node1:/# df -k /mnt3
Filesystem kbytes used avail capacity Mounted on
/dev/dsk/c1t0d0s0 125972 2 125970 1% /mnt3
#### snip ####

Similar Messages

  • How to boot from Windows 7 installer USB-thumbdrive?

    I have created a Windows 7 installer USB-thumbdrive from .ISO image using Boot Camp Assistant.
    What I can't figure out how to make my Mac Mini boot from USB to start the Windows 7 installer. The USB-thumbdrive does not show up in the boot menu when pressing ALT during startup (I'm using generic PC keyboard) nor is it available for selection in System Settings --> System --> Startup Disk.
    My computer is early 2009 Mac Mini, Intel Core 2 Duo, 4Gb RAM, OS X Mountain Lion 10.8.4.

    Anyone?
    Additional question: is a 2009 Mac Mini able to boot from USB to begin with?
    The situation has become particular annoying, because my Mac Mini's optical drive appears to be damaged and therefor I'm not able to boot from any kind of Windows install DVD.

  • HAL mounts USB flash devices without support for non-latin characters

    Hey folks!
    How can I make HAL mount USB flash devices with support for German characters such as ä, ö, ü, ß, etc? At the moment there's only a silly question mark instead: http://www12.file-upload.net/20.08.08/3cpcpx.png .
    Can anyone help me?
    Thanks.
    Henrik

    I think it's a bug in KDE4, because no other window manager or desktop environment has such problems. I had it as well, when I used KDE4.0.* for testing and seems like this remained. Do you have a completely german KDE4? Check the system settings!
    A thing comes to my mind, did you check it with konqueror? I guess this bug appears in dolphin, richtig? I schätz mal schon Try it with konqueror, if it doesn't appear there, it's a dolphin thing

  • [SOLVED] How to automatically mount USB drives with custom mount point

    edit:
    Original title was : 'Unable to mount USB disk via /etc/rc.local', but got changed since the /etc/rc.local problem isn't relevant for me anymore.
    Hello,
    Since I am new to this forum, I'll start off with this :
    Thanks to archlinux, its founder and all its contributors, cause this is the operating system (flavour) that annoys me the least.
    The root problem :
    I want to automount USB storage devices to other places than /media/ and without the need for programs that depend on gnome and the like. As I tried some stuff with hald and such, I didn't really get to a nice and easy to configure solution. Any hints in that direction are always welcome.
    For now, automount of known USB storages devices during boot, will do.
    So the things I tried and didnt work :
    1.
    Provide the disk info to /etc/fstab (via the disks UUID and 'auto' filesystem)
    Add 'mount /mountpoint' to /etc/rc.local
    Result : the mount command in rc.local says '... specify filesystem'
    However, after boot, running /etc/rc.local mounts the USB disks correctly.
    2.
    Provide the disk info to /etc/fstab (via the disks UUID and the correct filesystem)
    Add 'mount /mountpoint' to /etc/rc.local
    Result : pc doesn't get through boot process and gives me the 'ctrl-d to reboot or root passwd for maintenance'
    3.
    Provide no disk info in /etc/fstab
    Add the full mount line to /etc/rc.local (mount -t fs /dev/disks/by-uuid/MyUUID /MyMountpoint )
    Result : don't remember the output of the mount execution, but well, it didn't mount
    However, after boot, running /etc/rc.local mounts the USB disks correctly.
    Is there something that isn't loaded at the time of rc.local execution that I need for mounting of USB devices ? Or why else is this failing ?
    Regards,
    BasiK
    Last edited by BasiK (2009-08-28 07:22:50)

    Thanks for the hint hunterthomson, but the pc I will be using it on, is an own-built HTPC/home file server, so there is no way I want to use a graphical file manager to get the usb disks mounted.
    I tried to figure out a little about udev rules, and I got to do what I wanted to do, so thx for pointing me in that direction Mr.Elendig.
    Btw, I am indeed also using auto-sleep/park disks, but this udev way works perfectly.
    I added two rules files to /etc/udev/rules.d/ :
    The first for a known usb disk (with its volume uuid), with a named mountpoint under my media dir /symbiosis/ :
    [basik@plox ~]$ cat /etc/udev/rules.d/80-usb-utopia.rules
    ACTION=="add", KERNEL=="sd[b-z][0-9]", ENV{ID_FS_UUID}=="a59332c2-07ba-4c52-afb5-20e361bdf71a",SYMLINK+="usb-%n", GROUP="storage", NAME="%k"
    ACTION=="add", KERNEL=="sd[b-z][0-9]", ENV{ID_FS_UUID}=="a59332c2-07ba-4c52-afb5-20e361bdf71a",RUN+="/bin/mkdir -p /symbiosis/utopia"
    ACTION=="add", KERNEL=="sd[b-z][0-9]", ENV{ID_FS_UUID}=="a59332c2-07ba-4c52-afb5-20e361bdf71a", RUN+="/bin/mount -t auto -o rw,noauto,sync,dirsync,noexec,nodev,noatime /dev/%k /symbiosis/utopia", OPTIONS="last_rule"
    ACTION=="remove", KERNEL=="sd[b-z][0-9]", ENV{ID_FS_UUID}=="a59332c2-07ba-4c52-afb5-20e361bdf71a", RUN+="/bin/umount -l /symbiosis/utopia", OPTIONS="last_rule"
    The second for unknown usb disks, to mount under the same dir. This is simply taken from the archwiki http://wiki.archlinux.org/index.php/Ude … .26_Tricks
    Make sure these rules are executed after the ones for specific usb disks.
    [basik@plox ~]$ cat /etc/udev/rules.d/usb-disks.rules
    KERNEL=="sd[a-z]", NAME="%k", SYMLINK+="usb%m", GROUP="storage", OPTIONS="last_rule"
    ACTION=="add", KERNEL=="sd[a-z][0-9]", SYMLINK+="usb%n", GROUP="storage", NAME="%k"
    ACTION=="add", KERNEL=="sd[a-z][0-9]", RUN+="/bin/mkdir -p /symbiosis/usb%n"
    ACTION=="add", KERNEL=="sd[a-z][0-9]", RUN+="/bin/mount -t auto -o rw,noauto,sync,dirsync,noexec,nodev,noatime /dev/%k /symbiosis/usb%n", OPTIONS="last_rule"
    ACTION=="remove", KERNEL=="sd[a-z][0-9]", RUN+="/bin/umount -l /symbiosis/usb%n"
    ACTION=="remove", KERNEL=="sd[a-z][0-9]", RUN+="/bin/rmdir /symbiosis/usb%n", OPTIONS="last_rule"
    These may not be the nicest looking udev rules, but it works for what I wanted to do with it.

  • Trouble ejecting USB Thumbdrive

    I'm having a issue ejecting a USB thumbdrive (Namely a SanDisk Cruzer... I'm not sure if other thumbdrives have the same problem or not.)
    When I try to eject the drive, it says the drive is in use. I try a second time (right away, with out clicking anything else), and it works! All my programs are off, and nothing (AFAIK) is using it.
    This used to never happen when I had Leopard installed. Then I downgraded to Tiger, and the issue started, and then I upgraded (a clean install, not exactly a update) and the issue is still there.
    I have iBook G4, with 1.25 GB ram.
    Any ideas? Thanks in advance...

    blueTitanium wrote:
    I'm having a issue ejecting a USB thumbdrive (Namely a SanDisk Cruzer... I'm not sure if other thumbdrives have the same problem or not.)
    When I try to eject the drive, it says the drive is in use. I try a second time (right away, with out clicking anything else), and it works! All my programs are off, and nothing (AFAIK) is using it.
    You can learn what's "using" a file on your thumb drive with a command in the Terminal utility. Supposing your thumb drive volume name is "George", launch the Terminal utility, drag the Terminal window to be rather wide, and enter this command, followed by a "return":
    sudo lsof | grep George
    (Spaces doubled for readibility. That's a lower-case letter "L" in the second "word" of the command. That's a "shift-backslash" after "lsof". Case is critical.)
    You'll be prompted for your administrative password. In the output the first "word" on a line (ignoring line wrapping) will be the name of the process that has the file open. The last thing on the line will be the file that's open.

  • Mounting USB devices in arch guest

    I'm new to virtualbox, but not to linux.  I have been using arch for at least 3 years, so I have some familiarity with it.  I have recently installed arch as a guest OS on virtualbox (on OSX host).  I am having some trouble accessing an attached USB device from the arch guest.  I have defined the virtualbox USB filter for my device, and it appears to work, detecting the identified device and attaching it to the guest (at least as far as virtualbox is concerned).   I can see the device in the virtualbox pull-down menu, and it shows with a "checkmark" next to it, showing (I think) that it has been attached to my arch guest.
    Problem is, I cannot see the device from the arch guest.  no entry in /dev for any USB device.  symptoms are the same whether i insert ther USB device before or after starting the arch guest.  I have HAL and dbus active in my guest.  Also, I have made this work in arch installed natively.  since there is no /dev entry, this might appear to be some form of udev issue?  is there a specific udev setup that I should be aware of for arch as a guest?
    Please help if you can.  I will appreciate all comments and suggestions.
    -dvh

    hey, ive got Arch setup in virtualbox as well, and can mount usb's and cd's etc. (although with some issues i may need to bring up in another thread...) anyways, im assuming you have the PUEL virtualbox and not the OSE one?
    also, your certain that you've mounted the correct USB (on the Virtual Box pull-down menu)? because you may have mounted a USB which was already attached to your host, and not the actual USB?
    just checking, i dont know much about how to fix this issue so im just going at the simple solutions...

  • MOUNT USB STORAGE FOR VM BACKUP

    Hi, I just tried to mount USB Storage to my host with linux version.
    I detect it with fdisk -l and esxcli storage core device list | grep -i usb, after stopping usbarbitrator
    Result:
    /dev/disks #dmesg
    ScsiDevice: 3385: Successfully registered device "mpx.vmhba50:C0:T0:L0" from plugin "NMP" of type 0
    /dev/disks # esxcli storage core device list | grep -i usb
       Display Name: Local USB Direct-Access (mpx.vmhba32:C0:T0:L0)
       Display Name: Local USB Direct-Access (mpx.vmhba50:C0:T0:L0)
    How can I get disk usable for perform a VM backup?

    hooya wrote:
    It's in debugging mode now, which is why I can adb push to the phone. The phone should (and has in the past) mounted USB storage even in debugging mode.
    That wouldn't change the fact that no other USB mass storage will mount either. I'm just using my phone as an example. USB Hard drives and my SD card reader don't show up either, but I can't do a "push" command to those like I can my phone...
    If you are wondering where your post went, I think you meant to hit the 'reply' link rather than the 'report' link.  It happens more often than you would think
    Edit: Oh, I see you already figured that out.
    Last edited by ewaller (2012-07-06 02:30:26)

  • Pcmanfm is "Not Authorized" to mount usb drives

    Hi,
    I recently installed arch linux it's a nice distro but I got a few problem with it.
    The biggest one is that I am actually not able to mount usb drives with pcmanfm this means that I am not able to use my old debian /home so far.
    I tired multiple thinks (some of them are still active)  e.g for example I used to setup a udev rules which wasn't helpful at all (and even after deleting this rule I always see server empty folder in /media (but that's another problem)).
    Any ideas why I am not able to mount encrypted and not encrypted USB drives in arch linux?
    Last edited by 42sec (2011-12-28 13:21:41)

    wonder wrote:paste ck-list-sessions output, uname -r and cat /etc/pam.d/login
    [sec42@archlinux ~]$ ck-list-sessions
    Session1:
    unix-user = '1000'
    realname = ''
    seat = 'Seat1'
    session-type = ''
    active = FALSE
    x11-display = ''
    x11-display-device = ''
    display-device = '/dev/tty1'
    remote-host-name = ''
    is-local = TRUE
    on-since = '2011-12-28T14:28:01.840505Z'
    login-session-id = '1'
    idle-since-hint = '2011-12-28T14:28:32.462384Z'
    [sec42@archlinux ~]$ uname -r
    3.1.5-1-ARCH
    [sec42@archlinux ~]$ cat /etc/pam.d/login
    #%PAM-1.0
    auth required pam_securetty.so
    auth requisite pam_nologin.so
    auth required pam_unix.so nullok
    auth required pam_tally.so onerr=succeed file=/var/log/faillog
    # use this to lockout accounts for 10 minutes after 3 failed attempts
    #auth required pam_tally.so deny=2 unlock_time=600 onerr=succeed file=/var/log/faillog
    account required pam_access.so
    account required pam_time.so
    account required pam_unix.so
    #password required pam_cracklib.so difok=2 minlen=8 dcredit=2 ocredit=2 retry=3
    #password required pam_unix.so sha512 shadow use_authtok
    session required pam_unix.so
    session required pam_env.so
    session required pam_motd.so
    session required pam_limits.so
    session optional pam_mail.so dir=/var/spool/mail standard
    session optional pam_lastlog.so
    session optional pam_loginuid.so
    -session optional pam_ck_connector.so nox11
    -session optional pam_systemd.so

  • [SOLVED] Cannot mount usb (as normal user)

    Hello
    I'm facing this problem for the first time, but can't tell if it came after an update or an unexpected reboot (light went out).
    I'm using latest kde (4.9.2?), and the latest kernel,
    Linux gantz 3.6.6-1-ARCH #1 SMP PREEMPT Mon Nov 5 11:57:22 CET 2012 x86_64 GNU/Linux
    When I plug any usb device, kde ask me what to do. When trying to mount it, either from the kde "mount" plasmoid or from dolphin, I get a "Not authorized" error. Mounting via cli with sudo works fine.
    After doing some research, I found that I need to be in the storage group in order to be able to mount, so I checked, and I was already on the storage group. Next.
    More research sent me to lots of pages talking abour .xinitrc, wich doesn't exists (on my home, at least). Also tons of pages where talking about somethin like "exec ck-launch-session dbus-launch session-manager" (I login via kdm), but the ck-launch-session is not found on my computer either.
    So i'm stucked right now, and don't know how to proceed, any clues? Thanks
    Last edited by mzneverdies (2012-11-10 13:10:09)

    mzneverdies wrote:
    Solved, it was a polkit issue, don't know what caused it, since i didn't touch any config file/dialog.
    after changing allow any to "yes" in this section
    <action id="org.freedesktop.udisks.filesystem-mount">
    <description>Mount a device</description>
    <description xml:lang="da">Montér en enhed</description>
    <message>Authentication is required to mount the device</message>
    <message xml:lang="da">Autorisering er påkrævet for at montere et fil system</message>
    <defaults>
    <allow_any>yes</allow_any>
    <allow_inactive>yes</allow_inactive>
    <allow_active>yes</allow_active>
    </defaults>
    </action>
    on file /usr/share/polkit-1/actions/org.freedesktop.udisks.policy, everything came back to normal, and i'm able to mount usb devices.
    pd @Raynman: removing myself from the storage group did not change anything.
    that's not a fix, it's a crappy workaround. You are not supposed to touch these files, they will be overwritten on an upgrade. My guess is that you are simply not using systemd and therefore you are not in an active logind session. You have to boot with systemd, as mentioned in the news. Everything should then just work out of the box.

  • 10.5.6 update...can't see iPod or usb thumbdrives

    I recently upgraded my desktop and laptop to Leopard (from a DVD install disc). After the upgrade, software update on the iMac showed several update for the OS. I allowed software update to install them. BIG MISTAKE. Now my iMac no longer allows me to sync my iPod. It is as if I am not even connecting it. Nothing, nada no response at all. My usb thumbdrive (PNY Attache), which worked fine prior to software update, upon plugging it in flashes several times and then simple goes dead. It seems to make no difference which usb port the iPod or usb drive are plugged into. They both work fine on the iBook which is 10.5 but has not had the software update run on it yet! (like I really would run it on this after the problems on the iMac!)
    I wonder if software update does a combo update or regular update. I have download both from apple's website but wanted to see what other though before trying to run the combo update.

    Hello, heatsiphonman,
    I am having the exact same issue with my 5G iPod. I tried a clean restart (with no memory of open windows), and all the other suggestions via the support website and it's still a no-go. Not sure where to go from here. It seems like it may be a Lion issue or a combination of Lion and iTunes 10.5. I may take it in to an Apple store and see if I can get it to sync there. Meanwhile, I'll keep a close eye on this topic to see if anyone else might be having this issue.
    Mike.

  • Re-install from USB thumbdrive (purchased - no app store)

    Does anyone know how to re-intall lion after i've formated my harddrive in Disk Utility IF i purchased my OSX at the apple store via a USB thumbdrive and not over the app store? I can't get passed that point.

    Hi ..
    Yes, installing the OS X Lion Update 10.7.3 (Client Combo) will reinstall the App Store for you.
    Restart your Mac after the combo is installed.
    If that didn't help, some third party apps like Little Snitch can prevent the Sign In window from appearing >  Mac App Store: Sign in sheet does not appear, or does not accept typed text

  • Can't mount usb devices as a normal user

    Hi.
    I woud like to ask for help. I've been struggling with some "bug" that i came with Arch and usb devices (disks, pendrives). I can't mount it as a normal user using KDE default mounting software (Dolphin, for an exmample). I can mount it only in therminal by using sudo privileages. Is there a way to fix it? I read it, the same problem:
    https://bbs.archlinux.org/viewtopic.php?id=180025
    I tried to check everything according this topic, also with udisk2 archwiki thread but on my desktop machine i just can't mount usb devices without root password. This is how the error looks like for a Dolphin:
    <Over sized Image removed. URL link preserved>
    This is the error, from picture
    Error when trying to use acces to "removable device 7,5GB". System showed: The requested operation has failed. Error checking authorization:
    GDBus.Error:org.freedesktop.PolicyKit1.Error.Failed: action org.freedesktop.udisks2.filesystem-mount is not registered (polkit-error-quark, 0)
    Could somebody help me? I even installed udisk mounting tool to mont without root password, added 50-udisks.policy and it just does not work.
    Help.
    I can mount it wit terminal by typing
    sudo mount /dev/sdXY /mnt/usb
    than i'm asked for password and it is mounted. Don't know why i can't mount it without password when connecting usb devices to usb port.
    moderator edit [ewaller]Removed link to over sized image..  Note, you set up a click through thumbnail correctly, but the "Thumbnail" was the same image and was too large
    Last edited by ewaller (2014-09-28 16:37:41)

    Some refresh. I followed this topic:
    https://bbs.archlinux.org/viewtopic.php?id=180025
    with the same problem. I found errors here:
    firekage@arch_desktop ~]$ journalctl -r -u polkit
    -- Logs begin at pią 2014-06-13 18:04:12 CEST, end at czw 2014-12-25 20:15:01 CET. --
    cze 23 15:59:15 arch_desktop polkitd[306]: Unregistered Authentication Agent for unix-session:c1 (system bus name :1.24, object path /org/kde/PolicyKit1/AuthenticationAgent, locale pl_PL.UTF-8) (disconnected from bus)
    cze 23 15:29:59 arch_desktop polkitd[306]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.11 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
    cze 20 22:21:05 arch_desktop polkitd[306]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.11 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
    cze 20 22:21:03 arch_desktop polkitd[306]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.11 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
    cze 20 22:21:01 arch_desktop polkitd[306]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.11 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
    cze 20 22:21:00 arch_desktop polkitd[306]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.11 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
    cze 20 22:20:59 arch_desktop polkitd[306]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.11 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
    cze 20 22:20:58 arch_desktop polkitd[306]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.11 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
    cze 20 22:20:06 arch_desktop polkitd[306]: Registered Authentication Agent for unix-session:c1 (system bus name :1.24 [/usr/lib/kde4/libexec/polkit-kde-authentication-agent-1], object path /org/kde/PolicyKit1/AuthenticationAgent, locale pl_PL.UTF-8)
    cze 20 22:19:49 arch_desktop systemd[1]: Started Authorization Manager.
    cze 20 22:19:49 arch_desktop polkitd[306]: Acquired the name org.freedesktop.PolicyKit1 on the system bus
    cze 20 22:19:49 arch_desktop polkitd[306]: Finished loading, compiling and executing 1 rules
    cze 20 22:19:49 arch_desktop polkitd[306]: Loading rules from directory /usr/share/polkit-1/rules.d
    cze 20 22:19:49 arch_desktop polkitd[306]: Loading rules from directory /etc/polkit-1/rules.d
    cze 20 22:19:49 arch_desktop polkitd[306]: Started polkitd version 0.112
    -- Reboot --
    cze 20 22:15:10 arch_desktop systemd[1]: Stopping Authorization Manager...
    cze 20 22:15:08 arch_desktop polkitd[304]: Unregistered Authentication Agent for unix-session:c1 (system bus name :1.23, object path /org/kde/PolicyKit1/AuthenticationAgent, locale pl_PL.UTF-8)
    cze 20 22:02:59 arch_desktop polkitd[304]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.11 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
    cze 20 22:02:56 arch_desktop polkitd[304]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.11 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
    cze 20 22:02:55 arch_desktop polkitd[304]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.11 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
    cze 20 22:02:54 arch_desktop polkitd[304]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.11 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
    cze 20 22:02:53 arch_desktop polkitd[304]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.11 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
    cze 20 22:00:00 arch_desktop polkitd[304]: Registered Authentication Agent for unix-session:c1 (system bus name :1.23 [/usr/lib/kde4/libexec/polkit-kde-authentication-agent-1], object path /org/kde/PolicyKit1/AuthenticationAgent, locale pl_PL.UTF-8)
    cze 20 21:59:26 arch_desktop systemd[1]: Started Authorization Manager.
    cze 20 21:59:26 arch_desktop polkitd[304]: Acquired the name org.freedesktop.PolicyKit1 on the system bus
    cze 20 21:59:26 arch_desktop polkitd[304]: Finished loading, compiling and executing 1 rules
    cze 20 21:59:26 arch_desktop polkitd[304]: Loading rules from directory /usr/share/polkit-1/rules.d
    cze 20 21:59:26 arch_desktop polkitd[304]: Loading rules from directory /etc/polkit-1/rules.d
    cze 20 21:59:26 arch_desktop polkitd[304]: Started polkitd version 0.112
    cze 20 21:59:26 arch_desktop systemd[1]: Starting Authorization Manager...
    -- Reboot --
    cze 20 21:58:39 arch_desktop systemd[1]: Stopped Authorization Manager.
    cze 20 21:58:39 arch_desktop systemd[1]: Stopping Authorization Manager...
    cze 20 21:55:01 arch_desktop polkitd[306]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.10 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
    cze 20 21:54:59 arch_desktop polkitd[306]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.10 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
    cze 20 21:54:58 arch_desktop polkitd[306]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.10 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
    cze 20 21:54:56 arch_desktop polkitd[306]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.10 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
    cze 20 21:54:56 arch_desktop polkitd[306]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.10 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
    cze 20 21:47:40 arch_desktop polkitd[306]: Registered Authentication Agent for unix-session:c1 (system bus name :1.21 [/usr/lib/kde4/libexec/polkit-kde-authentication-agent-1], object path /org/kde/PolicyKit1/AuthenticationAgent, locale pl_PL.UTF-8)
    cze 20 21:47:22 arch_desktop systemd[1]: Started Authorization Manager.
    cze 20 21:47:22 arch_desktop polkitd[306]: Acquired the name org.freedesktop.PolicyKit1 on the system bus
    cze 20 21:47:22 arch_desktop polkitd[306]: Finished loading, compiling and executing 1 rules
    cze 20 21:47:22 arch_desktop polkitd[306]: Loading rules from directory /usr/share/polkit-1/rules.d
    cze 20 21:47:22 arch_desktop polkitd[306]: Loading rules from directory /etc/polkit-1/rules.d
    cze 20 21:47:22 arch_desktop polkitd[306]: Started polkitd version 0.112
    cze 20 21:47:22 arch_desktop systemd[1]: Starting Authorization Manager...
    -- Reboot --
    cze 20 19:56:46 arch_desktop systemd[1]: Stopping Authorization Manager...
    cze 20 19:56:45 arch_desktop polkitd[310]: Unregistered Authentication Agent for unix-session:c1 (system bus name :1.21, object path /org/kde/PolicyKit1/AuthenticationAgent, locale pl_PL.UTF-8)
    cze 20 19:55:51 arch_desktop polkitd[310]: Registered Authentication Agent for unix-session:c1 (system bus name :1.21 [/usr/lib/kde4/libexec/polkit-kde-authentication-agent-1], object path /org/kde/PolicyKit1/AuthenticationAgent, locale pl_PL.UTF-8)
    cze 20 19:55:16 arch_desktop systemd[1]: Started Authorization Manager.
    cze 20 19:55:16 arch_desktop polkitd[310]: Acquired the name org.freedesktop.PolicyKit1 on the system bus
    cze 20 19:55:16 arch_desktop polkitd[310]: Finished loading, compiling and executing 1 rules
    cze 20 19:55:16 arch_desktop polkitd[310]: Loading rules from directory /usr/share/polkit-1/rules.d
    cze 20 19:55:16 arch_desktop polkitd[310]: Loading rules from directory /etc/polkit-1/rules.d
    cze 20 19:55:16 arch_desktop polkitd[310]: Started polkitd version 0.112
    cze 20 19:55:16 arch_desktop systemd[1]: Starting Authorization Manager...
    -- Reboot --
    cze 20 19:54:38 arch_desktop systemd[1]: Stopping Authorization Manager...
    cze 20 19:54:13 arch_desktop polkitd[305]: Unregistered Authentication Agent for unix-session:c1 (system bus name :1.21, object path /org/kde/PolicyKit1/AuthenticationAgent, locale pl_PL.UTF-8)
    cze 20 16:47:01 arch_desktop polkitd[305]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.10 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
    cze 20 03:02:19 arch_desktop polkitd[305]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.10 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
    cze 19 21:32:38 arch_desktop polkitd[305]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.10 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
    cze 19 19:25:08 arch_desktop polkitd[305]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.10 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
    cze 19 19:24:40 arch_desktop polkitd[305]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.10 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
    cze 19 19:24:38 arch_desktop polkitd[305]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.10 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
    cze 19 19:24:36 arch_desktop polkitd[305]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.10 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
    cze 19 19:24:35 arch_desktop polkitd[305]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.10 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
    cze 19 19:24:34 arch_desktop polkitd[305]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.10 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
    Could somebody help me? I even checked all rules in /etc/polkit-1/rules.d and /usr/share/polkit-1/actions on my notebook, and all files are the same with the same user permission but on notebook i can mount usb without problem, but on my desktop can't at all.

  • Download itunes to usb thumbdrive

    Can I download itunes from my itunes library to a usb thumbdrive? if so, how?

    Drag the songs from iTunes to it in the Finder, or control-click them, show them in the Finder, and copy the files.
    (43108)

  • Help me, why i canot auto mount Usb harddisk?

    hi all,
    i have install a new archlinux, but i found i cant auto mount Usb harddisk
    Canot mount volume
    Canot get volume.fstype.alternative
    i have install hal,dbus , ntfs-3g, and add hal,dbus to rc.conf, why it still donnot work?

    yes, i add to storage group:
    [root@myhost figo]# groups figo
    wheel network video audio optical storage power users dbus hal stb-admin figo
    [root@myhost figo]#
    i have confuse, i use dolpin which is kde4 program, i cant mount my usb harddisk, but
    i have nautilus ,it canot mount.
    [root@myhost figo]# hal-device /dev/sdb1
    libhal.c 522 : invalid udi: /dev/sdb1 doesn't startwith '/org/freedesktop/Hal/devices/'.
    (null): (null)
    [root@myhost figo]#
    what is the problem?

  • Photosmart 7525 now errors when insert USB thumbdrive (error B8BD3348)

    I have been using a USB thumbdrive to scan documents then move to my computer to save (I prefer this over emailing documents, routed through the internet, for security). I have done this for months with the same printer, flash drive and laptop.Recently, I inserted the thumbdrive, the screen flashes blue with a code I think is B8BD3348 (it flashes bright so the video on my phone gets overwhelmed and blurs, and it is gone in under 2 seconds) then the screen goes black with "Printer Error: There is a problem with the printer. Turn the printer off then on." and all the lights (power, network, home, back, cancel and help) start flashing.I can reset (if I take out the USB, otherwise when it restarts it does the same thing). And the USB thumbdrive can still be read by the computer, and I have scanned the thumbdrive (TrendMicro) and found no issues. 

    Hello , and welcome to the HP Forums, I hope you enjoy your experience! I see you are having USB issues.  I would love to try and help you, but I do need a little information first. I am linking a few HP Support documents below that will show you how to find your product number. Also, please include which operating system you are using. Also, if you're using Windows, please include whether your operating system is 32-bit or 64-bit.
    Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
    Which Windows operating system am I running?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    Please let me know what you find.  Thanks for posting on the HP Forums!

Maybe you are looking for